| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
to @curr
Trivially simplify ((struct device_private *)curr)->device->p to @curr
in deferred_devs_show() since both are same.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240908-trivial_simpli-v1-1-53e0f1363299@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
U-Boot environment variables are stored in a specific format. Actual
data can be placed in various storage sources (MTD, UBI volume, EEPROM,
NVRAM, etc.).
Move all generic (NVMEM device independent) code from NVMEM device
driver to an NVMEM layout driver. Then add a simple NVMEM layout code on
top of it.
This allows using NVMEM layout for parsing U-Boot env data stored in any
kind of NVMEM device.
The old NVMEM glue driver stays in place for handling bindings in the
MTD context. To avoid code duplication it uses exported layout parsing
function. Please note that handling MTD & NVMEM layout bindings may be
refactored in the future.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240902142952.71639-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Root Complex
(RC) support. While the controller resembles that of i.MX8MP, the PHY
differs significantly. Also, there's a distinction between PCI bus
addresses and CPU addresses.
Introduce IMX_PCIE_FLAG_CPU_ADDR_FIXUP in drvdata::flags to indicate driver
need the cpu_addr_fixup() callback to facilitate CPU address to PCI bus
address conversion according to "ranges" property.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-11-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: check resource_list_first_type() for NULL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
- After fopen check NULL before using the file pointer use
Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
Link: https://lore.kernel.org/r/20240906203025.89588-1-RuffaloLavoisier@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The definition of ocxl_create_cdev() and ocxl_destroy_cdev() has been
removed since commit 75ca758adbaf ("ocxl: Create a clear delineation
between ocxl backend & frontend"). So, let's remove the empty declarations.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240907082555.60836-1-zhangzekun11@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The unsigned int should use "%u" instead of "%d".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240905065159.45774-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These 'struct kobj_type' are not modified. They are only used in
kobject_init() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying these structure and moving them to a read-only
section (from data to text), and can increase over all security.
```
[Before]
text data bss dec hex filename
10330 1908 20 12258 2fe2 drivers/uio/uio.o
[After]
text data bss dec hex filename
10458 1844 20 12322 3022 drivers/uio/uio.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240904012200.2010916-1-lihongbo22@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and can increase over all security.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240904011951.2010646-1-lihongbo22@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modify the comment for binder_proc_unlock() to clearly indicate which
spinlock it releases and to better match the acquire comment block
in binder_proc_lock().
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240902052330.3115-1-bajing@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused file rtw_rf.c
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2a31866e3e6f65e90d612f7473501066f6bc5937.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function rtw_ch2freq with array ch_freq_map and comments.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/53a8ee320803ae3efe22b648f2a4555482efaf46.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused files rtw_debug.c and rtw_debug.h.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/ab3d501e2ef0bb3980d8d271fb667ce20ed8dca5.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function dump_4_regs.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/583ba389a269a11f4c2497ae5152ad8299d88455.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function mac_reg_dump.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/80e89052b30d8c495f375e43fc4c1deeea75a624.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function bb_reg_dump.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e0372c46a62df20ecce9a9e66846cbd3484eb85d.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function dump_4_rf_regs.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b660342da763d1e03c44f2b3fdac0378b077e6b9.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function rf_reg_dump.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b66d915668366258523095adf388acef945dc0fa.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function rtw_hal_get_odm_var.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/adbeaac00054c87e4c55714817ffb85f68d37c4a.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function rxmem_to_recvframe and its comment.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/1016603607501abe08334f9577728dd3c4209572.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused function RTW_DISABLE_FUNC and its comment.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/46545805edb962ae97b15be60e0a3446aae42701.1725826273.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes spelling mistake to increase code readability
and searching.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/90f26f7bce03d80848e3c0fc166c5ab584b83446.1725933169.git.topofeverest8848@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes spelling mistake to increase code readability
and searching.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/8b9184ba4e489d7eec389389ae435fa4d9232113.1725933169.git.topofeverest8848@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes spelling mistake to increase code readability
and searching.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f77f1155d07de7780726562d628e8ed3a3ce4b4f.1725933169.git.topofeverest8848@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes spelling mistake to increase code readability
and searching.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/93a1b568ec96dea13dfc75232a08bbf42e270599.1725933169.git.topofeverest8848@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 30db8460f984a7f5299b6e07ea8a57cd09fc9557.
The offending commit tried to make the error messages of a few Greybus
drivers in staging more consistent by capitalising messages, but the
rest of the Greybus code do not follow this style so the change ended up
introducing an inconsistency instead.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20240909124853.9213-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable RxDrvInfoSize to rx_drv_info_size
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-17-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable RxBufShift to rx_buf_shift
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-16-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable bAddNewTs to add_new_ts
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-15-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable nStuckCount to stuck_count
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-14-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable isEncrypt to is_encrypt
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-13-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable SignalQuality to signal_quality
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-12-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable bAssoc to assoc
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-11-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable Operation to operation
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-10-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable ScanOperationBackupHandler to
scan_operation_backup_handler to fix checkpatch warning
Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-9-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable Para2 to para2
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-8-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable Para1 to para1
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-7-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable bPacketToSelf to packet_to_self
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-6-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable pFrame to frame
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-5-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable SignalStrength to signal_strength
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-4-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable SeqNum to seq_num
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-3-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable pReorderEntry to reorder_entry
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240908192633.94144-2-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass proper enumerated flag which exists, instead of an integer while
calling queue_message(). It helps with readability of the code.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-8-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The argument 'is_blocking' in queue_message_sync() is not
used in the function. Drop it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-7-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop vchiq_bulk_transfer() as every VCHIQ_BULK_MODE_* mode
now have their own dedicated functions to execute bulk transfers.
Also, drop the temporary label we introduced earlier in vchiq-dev.c
to jump over the vchiq_bulk_transfer() call when each separate mode
helper was being developed.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-6-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out bulk transfer for VCHIQ_BULK_MODE_NOCALLBACK and
VCHIQ_BULK_MODE_CALLBACK mode into a separate dedicated function
bulk_xfer_callback_interruptible(). It is suffixed by "_interruptible"
to denote that it can be interrupted and -EAGAIN can be returned. It
would be up to the users of the function to retry the call in those cases.
bulk_xfer_callback_interruptible() also takes in 'mode' parameter to
differentiate between VCHIQ_BULK_MODE_NOCALLBACK and
VCHIQ_BULK_MODE_CALLBACK, which then is directly passed to
vchiq_bulk_xfer_queue_msg_interruptible() inside the function.
Adjust the calls to vchiq-dev.c ioctl interface and vchiq_arm.c
for the respective bulk transfers.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-5-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out bulk transfer for blocking mode into a separate dedicated
function bulk_xfer_blocking_interruptible(). It is suffixed by
"_interruptible" to denote that it can be interrupted and -EAGAIN
can be returned. It would be up to the users of the function to retry
the call in those cases.
Adjust the calls to vchiq-dev.c ioctl interface and vchiq_arm.c
for blocking bulk transfers.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-4-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out core logic for preparing bulk data transfer(mutex locking,
waits on vchiq_bulk_queue wait-queue, initialising the bulk transfer)
out of the vchiq_bulk_transfer(). This simplifies the existing
vchiq_bulk_transfer() and makes it more readable since all the core
logic is handled in vchiq_bulk_xfer_queue_msg_interruptible(). It
will also help us to refactor vchiq_bulk_transfer() easily for different
vchiq bulk transfer modes.
No functional changes intended in this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-3-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bulk transfer is VCHIQ_BULK_MODE_WAITING is used by VCHIQ ioctl
interface. It is factored out to a separate function from
vchiq_bulk_transfer() to bulk_xfer_waiting_interruptible().
This is a part of vchiq_bulk_transfer refactoring. Each bulk mode
will have their dedicated functions to execute bulk transfers.
Each mode will be handled separately in subsequent patches.
bulk_xfer_waiting_interruptible() is suffixed with "_interruptible"
to denote that it can be interrupted when a signal is received.
-EAGAIN maybe returned in those cases, similar to what
vchiq_bulk_transfer() does.
Adjust the vchiq_irq_queue_bulk_tx_rx() in the vchiq-dev.c to call
bulk_xfer_waiting_interruptible() for waiting mode. A temporary
goto label has been introduced to jump the call execution over
vchiq_bulk_transfer() for waiting mode only. When all dedicated bulk
transfer calls are introduced, this label shall be dropped.
No function changes intended in this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Apple's older A7-A9 SoCs seems to use bit 3 in UTRSTAT as RXTO, which is
enabled by bit 11 in UCON.
Access these bits in addition to the original RXTO and RXTO enable bits,
to allow serial rx to function on A7-A9 SoCs. This change does not
appear to affect the A10 SoC and up.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20240911050741.14477-4-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
