summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-04nfp: abm: fix a memory leak bugQiushi Wu
In function nfp_abm_vnic_set_mac, pointer nsp is allocated by nfp_nsp_open. But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released, which can lead to a memory leak bug. Fix this issue by adding nfp_nsp_close(nsp) in the error path. Fixes: f6e71efdf9fb1 ("nfp: abm: look up MAC addresses via management FW") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net: stmmac: gmac5+: fix potential integer overflow on 32 bit multiplyColin Ian King
The multiplication of cfg->ctr[1] by 1000000000 is performed using a 32 bit multiplication (since cfg->ctr[1] is a u32) and this can lead to a potential overflow. Fix this by making the constant a ULL to ensure a 64 bit multiply occurs. Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+") Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04cxgb4/chcr: avoid -Wreturn-local-addr warningArnd Bergmann
gcc-10 warns about functions that return a pointer to a stack variable. In chcr_write_cpl_set_tcb_ulp(), this does not actually happen, but it's too hard to see for the compiler: drivers/crypto/chelsio/chcr_ktls.c: In function 'chcr_write_cpl_set_tcb_ulp.constprop': drivers/crypto/chelsio/chcr_ktls.c:760:9: error: function may return address of local variable [-Werror=return-local-addr] 760 | return pos; | ^~~ drivers/crypto/chelsio/chcr_ktls.c:712:5: note: declared here 712 | u8 buf[48] = {0}; | ^~~ Split the middle part of the function out into a helper to make it easier to understand by both humans and compilers, which avoids the warning. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04s390/qeth: fix cancelling of TX timer on dev_close()Julian Wiedmann
With the introduction of TX coalescing, .ndo_start_xmit now potentially starts the TX completion timer. So only kill the timer _after_ TX has been disabled. Fixes: ee1e52d1e4bb ("s390/qeth: add TX IRQ coalescing support for IQD devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "A couple of bug fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: vsock: kick send_pkt worker once device is started virtio-blk: handle block_device_operations callbacks after hot unplug
2020-05-04Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()Peter Jones
This was sort of annoying me: random:~$ dmesg | tail -1 [523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. random:~$ dmesg | grep -c "Reducing the compressed" 47 This patch makes it DRM_INFO_ONCE() just like the similar message farther down in that function is pr_info_once(). Cc: stable@vger.kernel.org Signed-off-by: Peter Jones <pjones@redhat.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745 Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com [vsyrjala: Rebase due to per-device logging] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 6b7fc6a3e6af4ff5773949d0fed70d8e7f68d5ce) [Rodrigo: port back to DRM_INFO_ONCE] Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-05-04net: enetc: fix an issue about leak system resourcesDejin Zheng
the related system resources were not released when enetc_hw_alloc() return error in the enetc_pci_mdio_probe(), add iounmap() for error handling label "err_hw_alloc" to fix it. Fixes: 6517798dd3432a ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net/mlx4_core: Fix use of ENOSPC around mlx4_counter_alloc()Tariq Toukan
When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6a1fa ("net/mlx4_core: Allocate default counter per port") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04drm/i915: Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabledSultan Alsawaf
In commit 5a7d202b1574, a logical AND was erroneously changed to an OR, causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for kabylake and coffeelake, even when IPC is disabled. Fix the logic so that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled. Fixes: 5a7d202b1574 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl") Cc: stable@vger.kernel.org # 5.3.x+ Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com (cherry picked from commit 690d22dafa88b82453516387b475664047a6bd14) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-05-04drm/i915/gt: Make timeslicing an explicit engine propertyChris Wilson
In order to allow userspace to rely on timeslicing to reorder their batches, we must support preemption of those user batches. Declare timeslicing as an explicit property that is a combination of having the kernel support and HW support. Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200501122249.12417-1-chris@chris-wilson.co.uk (cherry picked from commit a211da9c771bf97395a3ced83a3aa383372b13a7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-05-04drm/i915: Avoid dereferencing a dead contextChris Wilson
Once the intel_context is closed, the GEM context may be freed and so the link from intel_context.gem_context is invalid. <3>[ 219.782944] BUG: KASAN: use-after-free in intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <3>[ 219.782996] Read of size 8 at addr ffff8881d7dff0b8 by task kworker/0:1/12 <4>[ 219.783052] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G U 5.7.0-rc2-g1f3ffd7683d54-kasan_118+ #1 <4>[ 219.783055] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017 <4>[ 219.783105] Workqueue: events heartbeat [i915] <4>[ 219.783109] Call Trace: <4>[ 219.783113] <IRQ> <4>[ 219.783119] dump_stack+0x96/0xdb <4>[ 219.783177] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783182] print_address_description.constprop.6+0x16/0x310 <4>[ 219.783239] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783295] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783300] __kasan_report+0x137/0x190 <4>[ 219.783359] ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783366] kasan_report+0x32/0x50 <4>[ 219.783426] intel_engine_coredump_alloc+0x1bc3/0x2250 [i915] <4>[ 219.783481] execlists_reset+0x39c/0x13d0 [i915] <4>[ 219.783494] ? mark_held_locks+0x9e/0xe0 <4>[ 219.783546] ? execlists_hold+0xfc0/0xfc0 [i915] <4>[ 219.783551] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 219.783557] ? _raw_spin_unlock_irqrestore+0x34/0x60 <4>[ 219.783606] ? execlists_submission_tasklet+0x118/0x3a0 [i915] <4>[ 219.783615] tasklet_action_common.isra.14+0x13b/0x410 <4>[ 219.783623] ? __do_softirq+0x1e4/0x9a7 <4>[ 219.783630] __do_softirq+0x226/0x9a7 <4>[ 219.783643] do_softirq_own_stack+0x2a/0x40 <4>[ 219.783647] </IRQ> <4>[ 219.783692] ? heartbeat+0x3e2/0x10f0 [i915] <4>[ 219.783696] do_softirq.part.13+0x49/0x50 <4>[ 219.783700] __local_bh_enable_ip+0x1a2/0x1e0 <4>[ 219.783748] heartbeat+0x409/0x10f0 [i915] <4>[ 219.783801] ? __live_idle_pulse+0x9f0/0x9f0 [i915] <4>[ 219.783806] ? lock_acquire+0x1ac/0x8a0 <4>[ 219.783811] ? process_one_work+0x811/0x1870 <4>[ 219.783827] ? rcu_read_lock_sched_held+0x9c/0xd0 <4>[ 219.783832] ? rcu_read_lock_bh_held+0xb0/0xb0 <4>[ 219.783836] ? _raw_spin_unlock_irq+0x1f/0x40 <4>[ 219.783845] process_one_work+0x8ca/0x1870 <4>[ 219.783848] ? lock_acquire+0x1ac/0x8a0 <4>[ 219.783852] ? worker_thread+0x1d0/0xb80 <4>[ 219.783864] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 <4>[ 219.783870] ? do_raw_spin_lock+0x129/0x290 <4>[ 219.783886] worker_thread+0x82/0xb80 <4>[ 219.783895] ? __kthread_parkme+0xaf/0x1b0 <4>[ 219.783902] ? process_one_work+0x1870/0x1870 <4>[ 219.783906] kthread+0x34e/0x420 <4>[ 219.783911] ? kthread_create_on_node+0xc0/0xc0 <4>[ 219.783918] ret_from_fork+0x3a/0x50 <3>[ 219.783950] Allocated by task 1264: <4>[ 219.783975] save_stack+0x19/0x40 <4>[ 219.783978] __kasan_kmalloc.constprop.3+0xa0/0xd0 <4>[ 219.784029] i915_gem_create_context+0xa2/0xab8 [i915] <4>[ 219.784081] i915_gem_context_create_ioctl+0x1fa/0x450 [i915] <4>[ 219.784085] drm_ioctl_kernel+0x1d8/0x270 <4>[ 219.784088] drm_ioctl+0x676/0x930 <4>[ 219.784092] ksys_ioctl+0xb7/0xe0 <4>[ 219.784096] __x64_sys_ioctl+0x6a/0xb0 <4>[ 219.784100] do_syscall_64+0x94/0x530 <4>[ 219.784103] entry_SYSCALL_64_after_hwframe+0x49/0xb3 <3>[ 219.784120] Freed by task 12: <4>[ 219.784141] save_stack+0x19/0x40 <4>[ 219.784145] __kasan_slab_free+0x130/0x180 <4>[ 219.784148] kmem_cache_free_bulk+0x1bd/0x500 <4>[ 219.784152] kfree_rcu_work+0x1d8/0x890 <4>[ 219.784155] process_one_work+0x8ca/0x1870 <4>[ 219.784158] worker_thread+0x82/0xb80 <4>[ 219.784162] kthread+0x34e/0x420 <4>[ 219.784165] ret_from_fork+0x3a/0x50 Fixes: 2e46a2a0b014 ("drm/i915: Use explicit flag to mark unreachable intel_context") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428090255.10035-1-chris@chris-wilson.co.uk (cherry picked from commit 24aac336ff78eb55aedda043ed982c61dc3ac49a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-05-04stmmac: fix pointer check after utilization in stmmac_interruptMaxim Petrov
The paranoidal pointer check in IRQ handler looks very strange - it really protects us only against bogus drivers which request IRQ line with null pointer dev_id. However, the code fragment is incorrect because the dev pointer is used before the actual check which leads to undefined behavior. Remove the check to avoid confusing people with incorrect code. Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04i40iw: Fix error handling in i40iw_manage_arp_cache()Dan Carpenter
The i40iw_arp_table() function can return -EOVERFLOW if i40iw_alloc_resource() fails so we can't just test for "== -1". Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-04tty: xilinx_uartps: Fix missing id assignment to the consoleShubhrajyoti Datta
When serial console has been assigned to ttyPS1 (which is serial1 alias) console index is not updated property and pointing to index -1 (statically initialized) which ends up in situation where nothing has been printed on the port. The commit 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") didn't contain this line which was removed by accident. Fixes: 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/ed3111533ef5bd342ee5ec504812240b870f0853.1588602446.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-04USB: serial: qcserial: Add DW5816e supportMatt Jolly
Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-05-04sun6i: dsi: fix gcc-4.8Arnd Bergmann
Older compilers warn about initializers with incorrect curly braces: drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable': drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces] union phy_configure_opts opts = { 0 }; ^ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces] Use the GNU empty initializer extension to avoid this. Fixes: bb3b6fcb6849 ("sun6i: dsi: Convert to generic phy handling") Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de
2020-05-04drm: ingenic-drm: add MODULE_DEVICE_TABLEH. Nikolaus Schaller
so that the driver can load by matching the device tree if compiled as module. Cc: stable@vger.kernel.org # v5.3+ Fixes: 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/1694a29b7a3449b6b662cec33d1b33f2ee0b174a.1588574111.git.hns@goldelico.com
2020-05-04vt: fix unicode console freeing with a common interfaceNicolas Pitre
By directly using kfree() in different places we risk missing one if it is switched to using vfree(), especially if the corresponding vmalloc() is hidden away within a common abstraction. Oh wait, that's exactly what happened here. So let's fix this by creating a common abstraction for the free case as well. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Reported-by: syzbot+0bfda3ade1ee9288a1be@syzkaller.appspotmail.com Fixes: 9a98e7a80f95 ("vt: don't use kmalloc() for the unicode screen buffer") Cc: <stable@vger.kernel.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2005021043110.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-04Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"Florian Fainelli
This reverts commit 580d952e44de5509c69c8f9346180ecaa78ebeec ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") because we should not be doing a clk_put() if we were not successful in getting a valid clock reference via clk_get() in the first place. Fixes: 580d952e44de ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200501013904.1394-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-04HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dockHans de Goede
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock, which can be used with various Dell Venue 11 models. Without this quirk the keyboard/touchpad combo works fine when connected at boot, but when hotplugged 9 out of 10 times it will not work properly. Adding the quirk fixes this. Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-04dmaengine: idxd: fix interrupt completion after unmaskingDave Jiang
The current implementation may miss completions after we unmask the interrupt. In order to make sure we process all competions, we need to: 1. Do an MMIO read from the device as a barrier to ensure that all PCI writes for completions have arrived. 2. Check for any additional completions that we missed. Fixes: 8f47d1a5e545 ("dmaengine: idxd: connect idxd to dmaengine subsystem") Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158834641769.35613.1341160109892008587.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04dmaengine: owl: Use correct lock in owl_dma_get_pchan()Cristian Ciocaltea
When the kernel is built with lockdep support and the owl-dma driver is used, the following message is shown: [ 2.496939] INFO: trying to register non-static key. [ 2.501889] the code is fine but needs lockdep annotation. [ 2.507357] turning off the locking correctness validator. [ 2.512834] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.3+ #15 [ 2.519084] Hardware name: Generic DT based system [ 2.523878] Workqueue: events_freezable mmc_rescan [ 2.528681] [<801127f0>] (unwind_backtrace) from [<8010da58>] (show_stack+0x10/0x14) [ 2.536420] [<8010da58>] (show_stack) from [<8080fbe8>] (dump_stack+0xb4/0xe0) [ 2.543645] [<8080fbe8>] (dump_stack) from [<8017efa4>] (register_lock_class+0x6f0/0x718) [ 2.551816] [<8017efa4>] (register_lock_class) from [<8017b7d0>] (__lock_acquire+0x78/0x25f0) [ 2.560330] [<8017b7d0>] (__lock_acquire) from [<8017e5e4>] (lock_acquire+0xd8/0x1f4) [ 2.568159] [<8017e5e4>] (lock_acquire) from [<80831fb0>] (_raw_spin_lock_irqsave+0x3c/0x50) [ 2.576589] [<80831fb0>] (_raw_spin_lock_irqsave) from [<8051b5fc>] (owl_dma_issue_pending+0xbc/0x120) [ 2.585884] [<8051b5fc>] (owl_dma_issue_pending) from [<80668cbc>] (owl_mmc_request+0x1b0/0x390) [ 2.594655] [<80668cbc>] (owl_mmc_request) from [<80650ce0>] (mmc_start_request+0x94/0xbc) [ 2.602906] [<80650ce0>] (mmc_start_request) from [<80650ec0>] (mmc_wait_for_req+0x64/0xd0) [ 2.611245] [<80650ec0>] (mmc_wait_for_req) from [<8065aa10>] (mmc_app_send_scr+0x10c/0x144) [ 2.619669] [<8065aa10>] (mmc_app_send_scr) from [<80659b3c>] (mmc_sd_setup_card+0x4c/0x318) [ 2.628092] [<80659b3c>] (mmc_sd_setup_card) from [<80659f0c>] (mmc_sd_init_card+0x104/0x430) [ 2.636601] [<80659f0c>] (mmc_sd_init_card) from [<8065a3e0>] (mmc_attach_sd+0xcc/0x16c) [ 2.644678] [<8065a3e0>] (mmc_attach_sd) from [<8065301c>] (mmc_rescan+0x3ac/0x40c) [ 2.652332] [<8065301c>] (mmc_rescan) from [<80143244>] (process_one_work+0x2d8/0x780) [ 2.660239] [<80143244>] (process_one_work) from [<80143730>] (worker_thread+0x44/0x598) [ 2.668323] [<80143730>] (worker_thread) from [<8014b5f8>] (kthread+0x148/0x150) [ 2.675708] [<8014b5f8>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) [ 2.682912] Exception stack(0xee8fdfb0 to 0xee8fdff8) [ 2.687954] dfa0: 00000000 00000000 00000000 00000000 [ 2.696118] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.704277] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 The obvious fix would be to use 'spin_lock_init()' on 'pchan->lock' before attempting to call 'spin_lock_irqsave()' in 'owl_dma_get_pchan()'. However, according to Manivannan Sadhasivam, 'pchan->lock' was supposed to only protect 'pchan->vchan' while 'od->lock' does a similar job in 'owl_dma_terminate_pchan()'. Therefore, this patch substitutes 'pchan->lock' with 'od->lock' and removes the 'lock' attribute in 'owl_dma_pchan' struct. Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de> Link: https://lore.kernel.org/r/c6e6cdaca252b5364bd294093673951036488cf0.1588439073.git.cristian.ciocaltea@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04drm/virtio: create context before RESOURCE_CREATE_2D in 3D modeGurchetan Singh
If 3D is enabled, but userspace requests a dumb buffer, we will call CTX_ATTACH_RESOURCE before actually creating the context. Fixes: 72b48ae800da ("drm/virtio: enqueue virtio_gpu_create_context after the first 3D ioctl") Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200501185557.740-1-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-03net: macb: fix an issue about leak related system resourcesDejin Zheng
A call of the function macb_init() can fail in the function fu540_c000_init. The related system resources were not released then. use devm_platform_ioremap_resource() to replace ioremap() to fix it. Fixes: c218ad559020ff9 ("macb: Add support for SiFive FU540-C000") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Yash Shah <yash.shah@sifive.com> Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03net: usb: qmi_wwan: add support for DW5816eMatt Jolly
Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03Merge tag 'iommu-fixes-v5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Fix a memory leak when dev_iommu gets freed and a sub-pointer does not - Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU driver - Export iommu_group_get_for_dev() only for GPLed modules - Fix AMD IOMMU interrupt remapping when x2apic is enabled - Fix error path in the QCOM IOMMU driver probe function * tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/qcom: Fix local_base status check iommu: Properly export iommu_group_get_for_dev() iommu/vt-d: Use right Kconfig option name iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config iommu/mediatek: Fix MTK_IOMMU dependencies iommu: Fix the memory leak in dev_iommu_free()
2020-05-03iio: adc: stm32-dfsdm: fix device used to request dmaFabrice Gasnier
DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: adc: stm32-adc: fix device used to request dmaFabrice Gasnier
DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: 2763ea0585c99 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: adc: ti-ads8344: Fix channel selectionGregory CLEMENT
During initial submission the selection of the channel was done using the scan_index member of the iio_chan_spec structure. It was an abuse because this member is supposed to be used with a buffer so it was removed. However there was still the need to be able to known how to select a channel, the correct member to store this information is address. Thanks to this it is possible to select any other channel than the channel 0. Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03staging: iio: ad2s1210: Fix SPI readingDragos Bogdan
If the serial interface is used, the 8-bit address should be latched using the rising edge of the WR/FSYNC signal. This basically means that a CS change is required between the first byte sent, and the second one. This change splits the single-transfer transfer of 2 bytes into 2 transfers with a single byte, and CS change in-between. Note fixes tag is not accurate, but reflects a point beyond which there are too many refactors to make backporting straight forward. Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-02Merge tag 'pm-5.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: - prevent the intel_pstate driver from printing excessive diagnostic messages in some cases (Chris Wilson) - make the hibernation restore kernel freeze kernel threads as well as user space tasks (Dexuan Cui) - fix the ACPI device PM disagnostic messages to include the correct power state name (Kai-Heng Feng). * tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: ACPI: Output correct message on target power state PM: hibernate: Freeze kernel threads in software_resume() cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
2020-05-02Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once * pm-sleep: PM: hibernate: Freeze kernel threads in software_resume()
2020-05-02iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'Christophe JAILLET
A call to 'vf610_dac_exit()' is missing in an error handling path. Fixes: 1b983bf42fad ("iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoC") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-02Merge tag 'dmaengine-fix-5.7-rc4' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Core: - Documentation typo fixes - fix the channel indexes - dmatest: fixes for process hang and iterations Drivers: - hisilicon: build error fix without PCI_MSI - ti-k3: deadlock fix - uniphier-xdmac: fix for reg region - pch: fix data race - tegra: fix clock state" * tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Fix process hang when reading 'wait' parameter dmaengine: dmatest: Fix iteration non-stop logic dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization dmaengine: fix channel index enumeration dmaengine: mmp_tdma: Reset channel error on release dmaengine: mmp_tdma: Do not ignore slave config validation errors dmaengine: pch_dma.c: Avoid data race between probe and irq handler dt-bindings: dma: uniphier-xdmac: switch to single reg region include/linux/dmaengine: Typos fixes in API documentation dmaengine: xilinx_dma: Add missing check for empty list dmaengine: ti: k3-psil: fix deadlock on error path dmaengine: hisilicon: Fix build error without PCI_MSI
2020-05-02vhost: vsock: kick send_pkt worker once device is startedJia He
Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt Details: 1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest 2. Then it sleeps for 2s 3. After guest vsock finishes initializing, vq->private_data is set 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again. After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo <n.b@live.com> Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jia He <justin.he@arm.com> Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2020-05-02virtio-blk: handle block_device_operations callbacks after hot unplugStefan Hajnoczi
A userspace process holding a file descriptor to a virtio_blk device can still invoke block_device_operations after hot unplug. This leads to a use-after-free accessing vblk->vdev in virtblk_getgeo() when ioctl(HDIO_GETGEO) is invoked: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] PGD 800000003a92f067 PUD 3a930067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000 RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246 RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40 RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680 R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000 FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk] [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0 [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20 [<ffffffff8d488771>] block_ioctl+0x41/0x50 [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0 [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0 A related problem is that virtblk_remove() leaks the vd_index_ida index when something still holds a reference to vblk->disk during hot unplug. This causes virtio-blk device names to be lost (vda, vdb, etc). Fix these issues by protecting vblk->vdev with a mutex and reference counting vblk so the vd_index_ida index can be removed in all cases. Fixes: 48e4043d4529 ("virtio: add virtio disk geometry feature") Reported-by: Lance Digby <ldigby@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2020-05-01Merge tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao) - Fix a potential math overflow (Yan Zhao) - Use follow_pfn() for calculating PFNMAPs (Sean Christopherson) * tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio: vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn() vfio: avoid possible overflow in vfio_iommu_type1_pin_pages vfio: checking of validity of user vaddr in vfio_dma_rw
2020-05-01gtp: set NLM_F_MULTI flag in gtp_genl_dump_pdp()Yoshiyuki Kurauchi
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01cxgb4: Add missing annotation for service_ofldq()Jules Irenge
Sparse reports a warning at service_ofldq() warning: context imbalance in service_ofldq() - unexpected unlock The root cause is the missing annotation at service_ofldq() Add the missing __must_hold(&q->sendq.lock) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: Make PTP-specific drivers depend on PTP_1588_CLOCKClay McClure
Commit d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") changed all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers." As a result it is possible to build PTP-capable Ethernet drivers without the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to handle the missing dependency gracefully. Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code out into separate drivers (e.g., TI_CPTS_MOD). The above commit also changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it possible to build them without the PTP subsystem. But as Grygorii Strashko noted in [1]: On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote: > Another question is that CPTS completely nonfunctional in this case and > it was never expected that somebody will even try to use/run such > configuration (except for random build purposes). In my view, enabling a PTP-specific driver without the PTP subsystem is a configuration error made possible by the above commit. Kconfig should not allow users to create a configuration with missing dependencies that results in "completely nonfunctional" drivers. I audited all network drivers that call ptp_clock_register() but merely `imply PTP_1588_CLOCK` and found five PTP-specific drivers that are likely nonfunctional without PTP_1588_CLOCK: NET_DSA_MV88E6XXX_PTP NET_DSA_SJA1105_PTP MACB_USE_HWSTAMP CAVIUM_PTP TI_CPTS_MOD Note how these symbols all reference PTP or timestamping in their name; this is a clue that they depend on PTP_1588_CLOCK. Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`. I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has its own dependencies, which `select` would not transitively apply. Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD; PTP_1588_CLOCK already selects that. [1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/ [2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK` here seems appropriate. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") Signed-off-by: Clay McClure <clay@daemons.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01hv_netvsc: Fix netvsc_start_xmit's return typeNathan Chancellor
netvsc_start_xmit is used as a callback function for the ndo_start_xmit function pointer. ndo_start_xmit's return type is netdev_tx_t but netvsc_start_xmit's return type is int. This causes a failure with Control Flow Integrity (CFI), which requires function pointer prototypes and callback function definitions to match exactly. When CFI is in enforcing, the kernel panics. When booting a CFI kernel with WSL 2, the VM is immediately terminated because of this. The splat when CONFIG_CFI_PERMISSIVE is used: [ 5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10): [ 5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40 [ 5.916772] Modules linked in: [ 5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1 [ 5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40 [ 5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25 [ 5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246 [ 5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08 [ 5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c [ 5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300 [ 5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000 [ 5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140 [ 5.916784] FS: 0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000 [ 5.916785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0 [ 5.916787] Call Trace: [ 5.916788] <IRQ> [ 5.916790] __cfi_check+0x3ab58/0x450e0 [ 5.916793] ? dev_hard_start_xmit+0x11f/0x160 [ 5.916795] ? sch_direct_xmit+0xf2/0x230 [ 5.916796] ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0 [ 5.916797] ? neigh_resolve_output+0xdf/0x220 [ 5.916799] ? neigh_connected_output.cfi_jt+0x8/0x8 [ 5.916801] ? ip6_finish_output2+0x398/0x4c0 [ 5.916803] ? nf_nat_ipv6_out+0x10/0xa0 [ 5.916804] ? nf_hook_slow+0x84/0x100 [ 5.916807] ? ip6_input_finish+0x8/0x8 [ 5.916807] ? ip6_output+0x6f/0x110 [ 5.916808] ? __ip6_local_out.cfi_jt+0x8/0x8 [ 5.916810] ? mld_sendpack+0x28e/0x330 [ 5.916811] ? ip_rt_bug+0x8/0x8 [ 5.916813] ? mld_ifc_timer_expire+0x2db/0x400 [ 5.916814] ? neigh_proxy_process+0x8/0x8 [ 5.916816] ? call_timer_fn+0x3d/0xd0 [ 5.916817] ? __run_timers+0x2a9/0x300 [ 5.916819] ? rcu_core_si+0x8/0x8 [ 5.916820] ? run_timer_softirq+0x14/0x30 [ 5.916821] ? __do_softirq+0x154/0x262 [ 5.916822] ? native_x2apic_icr_write+0x8/0x8 [ 5.916824] ? irq_exit+0xba/0xc0 [ 5.916825] ? hv_stimer0_vector_handler+0x99/0xe0 [ 5.916826] ? hv_stimer0_callback_vector+0xf/0x20 [ 5.916826] </IRQ> [ 5.916828] ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8 [ 5.916829] ? raw_setsockopt+0x8/0x8 [ 5.916830] ? default_idle+0xe/0x10 [ 5.916832] ? do_idle.llvm.10446269078108580492+0xb7/0x130 [ 5.916833] ? raw_setsockopt+0x8/0x8 [ 5.916833] ? cpu_startup_entry+0x15/0x20 [ 5.916835] ? cpu_hotplug_enable.cfi_jt+0x8/0x8 [ 5.916836] ? start_secondary+0x188/0x190 [ 5.916837] ? secondary_startup_64+0xa5/0xb0 [ 5.916838] ---[ end trace f2683fa869597ba5 ]--- Avoid this by using the right return type for netvsc_start_xmit. Fixes: fceaf24a943d8 ("Staging: hv: add the Hyper-V virtual network driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1009 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: phy: DP83TC811: Fix WoL in config init to be disabledDan Murphy
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 6d749428788b ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: phy: DP83822: Fix WoL in config init to be disabledDan Murphy
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission") Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01Merge tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes for this release: - NVMe pull request from Christoph, with a single fix for a double free in the namespace error handling. - Kill the bd_openers check in blk_drop_partitions(), fixing a regression in this merge window (Christoph)" * tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block: block: remove the bd_openers checks in blk_drop_partitions nvme: prevent double free in nvme_alloc_ns() error handling
2020-05-01Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Three driver bugfixes, and two reverts because the original patches revealed underlying problems which the Tegra guys are now working on" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Avoid i2c interrupt status clear race condition. i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time" Revert "i2c: tegra: Synchronize DMA before termination" i2c: iproc: generate stop event for slave writes
2020-05-01Merge tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular scheduled fixes for graphics. Nothing to extreme bunch of amdgpu fixes, i915 and qxl fixes, along with some misc ones. All seems to be progressing normally. core: - EDID off by one DTD fix - DP mst write return code fix dma-buf: - fix SET_NAME ioctl uapi - doc fixes amdgpu: - Fix a green screen on resume issue - PM fixes for SR-IOV SDMA fix for navi - Renoir display fixes - Cursor and pageflip stuttering fixes - Misc additional display fixes - (uapi) Add additional DCC tiling flags for navi1x i915: - Fix selftest refcnt leak (Xiyu) - Fix gem vma lock (Chris) - Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris) - Fix IRQ postinistall fault masks (Matt) qxl: - use after gree fix - fix lost kunmap - release leak fix virtio: - context destruction fix" * tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits) dma-buf: fix documentation build warnings drm/qxl: qxl_release use after free drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper() drm/i915: Use proper fault mask in interrupt postinstall too drm/amd/display: Use cursor locking to prevent flip delays drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1 drm/amd/display: Defer cursor update around VUPDATE for all ASIC drm/amd/display: fix rn soc bb update drm/amd/display: check if REFCLK_CNTL register is present drm/amdgpu: bump version for invalidate L2 before SDMA IBs drm/amdgpu: invalidate L2 before SDMA IBs (v2) drm/amdgpu: add tiling flags from Mesa drm/amd/powerplay: avoid using pm_en before it is initialized revised Revert "drm/amd/powerplay: avoid using pm_en before it is initialized" drm/qxl: qxl_release leak in qxl_hw_surface_alloc() drm/qxl: qxl_release leak in qxl_draw_dirty_fb() drm/virtio: only destroy created contexts drm/dp_mst: Fix drm_dp_send_dpcd_write() return code drm/i915/gt: Check cacheline is valid before acquiring drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma() ...
2020-05-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four minor fixes: three in drivers and one in the core. The core one allows an additional state change that fixes a regression introduced by an update to the aacraid driver in the previous merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target/iblock: fix WRITE SAME zeroing scsi: qla2xxx: check UNLOADING before posting async work scsi: qla2xxx: set UNLOADING before waiting for session deletion scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK
2020-05-01drm/amd/display: work around fp code being emitted outside of DC_FP_START/ENDDaniel Kolesa
The dcn20_validate_bandwidth function would have code touching the incorrect registers emitted outside of the boundaries of the DC_FP_START/END macros, at least on ppc64le. Work around the problem by wrapping the whole function instead. Signed-off-by: Daniel Kolesa <daniel@octaforge.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.6.x
2020-05-01drm/amdgpu/dc: Use WARN_ON_ONCE for ASSERTMichel Dänzer
Once should generally be enough for diagnosing what lead up to it, repeating it over and over can be pretty annoying. Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-01drm/amdgpu: drop redundant cg/pg ungate on runpm enterEvan Quan
CG/PG ungate is already performed in ip_suspend_phase1. Otherwise, the CG/PG ungate will be performed twice. That will cause gfxoff disablement is performed twice also on runpm enter while gfxoff enablemnt once on rump exit. That will put gfxoff into disabled state. Fixes: b2a7e9735ab286 ("drm/amdgpu: fix the hw hang during perform system reboot and reset") Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-09-12 18:50:50 +0000