summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-11-28RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()Yuan Can
As the nla_nest_start() may fail with NULL returned, the return value needs to be checked. Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221126043410.85632-1-yuancan@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-11-28soc: apple: rtkit: Stop casting function pointer signaturesSven Peter
Fixes: 9bd1d9a0d8bb ("soc: apple: Add RTKit IPC library") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st>
2022-11-28soc: apple: sart: Stop casting function pointer signaturesSven Peter
Fixes: b170143ae111 ("soc: apple: Add SART driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st>
2022-11-28net: wwan: iosm: fix incorrect skb lengthM Chetan Kumar
skb passed to network layer contains incorrect length. In mux aggregation protocol, the datagram block received from device contains block signature, packet & datagram header. The right skb len to be calculated by subracting datagram pad len from datagram length. Whereas in mux lite protocol, the skb contains single datagram so skb len is calculated by subtracting the packet offset from datagram header. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix crash in peek throughput testM Chetan Kumar
Peek throughput UL test is resulting in crash. If the UL transfer block free list is exhaust, the peeked skb is freed. In the next transfer freed skb is referred from UL list which results in crash. Don't free the skb if UL transfer blocks are unavailable. The pending skb will be picked for transfer on UL transfer block available. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix dma_alloc_coherent incompatible pointer typeM Chetan Kumar
Fix build error reported on armhf while preparing 6.1-rc5 for Debian. iosm_ipc_protocol.c:244:36: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type. Change phy_ap_shm type from phys_addr_t to dma_addr_t. Fixes: faed4c6f6f48 ("net: iosm: shared memory protocol") Reported-by: Bonaccorso Salvatore <carnil@debian.org> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix kernel test robot reported errorM Chetan Kumar
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain integer as NULL pointer. Use skb_trim() to reset skb tail & len. Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: phylink: fix PHY validation with rate adaptionRussell King (Oracle)
Tim Harvey reports that link modes which he does not expect to be supported are being advertised, and this is because of the workaround we have for PHYs that switch interface modes. Fix this up by checking whether rate matching will be used for the requested interface mode, and if rate matching will be used, perform validation only with the requested interface mode, rather than invoking this workaround. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: ethernet: nixge: fix NULL dereferenceYuri Karpov
In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Yuri Karpov <YKarpov@ispras.ru> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28Merge back earlier cpufreq material for v6.2.Rafael J. Wysocki
2022-11-28net: net_netdev: Fix error handling in ntb_netdev_init_module()Yuan Can
The ntb_netdev_init_module() returns the ntb_transport_register_client() directly without checking its return value, if ntb_transport_register_client() failed, the NTB client device is not unregistered. Fix by unregister NTB client device when ntb_transport_register_client() failed. Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28octeontx2-pf: Add support to filter packet based on IP fragmentSuman Ghosh
1. Added support to filter packets based on IP fragment. For IPv4 packets check for ip_flag == 0x20 (more fragment bit set). For IPv6 packets check for next_header == 0x2c (next_header set to 'fragment header for IPv6') 2. Added configuration support from both "ethtool ntuple" and "tc flower". Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: ethernet: mtk_wed: add wcid overwritten support for wed v1Sujuan Chen
All wed versions should enable the wcid overwritten feature, since the wcid size is controlled by the wlan driver. Tested-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: ethernet: ti: am65-cpsw: fix error handling in am65_cpsw_nuss_probe()Zhang Changzhong
The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev() even if register_netdev() fails, which triggers WARN_ON(1) in unregister_netdevice_many(). To fix it, make sure that unregister_netdev() is called only on registered netdev. Compile tested only. Fixes: 84b4aa493249 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28Merge tag 'mlx5-fixes-2022-11-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2022-11-24 This series provides bug fixes to mlx5 driver. Focusing on error handling and proper memory management in mlx5, in general and in the newly added macsec module. I still have few fixes left in my queue and I hope those will be the last ones for mlx5 for this cycle. Please pull and let me know if there is any problem. Happy thanksgiving. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28RDMA: Add netdevice_tracker to ib_device_set_netdev()Jason Gunthorpe
This will cause an informative backtrace to print if the user of ib_device_set_netdev() isn't careful about tearing down the ibdevice before its the netdevice parent is destroyed. Such as like this: unregister_netdevice: waiting for vlan0 to become free. Usage count = 2 leaked reference. ib_device_set_netdev+0x266/0x730 siw_newlink+0x4e0/0xfd0 nldev_newlink+0x35c/0x5c0 rdma_nl_rcv_msg+0x36d/0x690 rdma_nl_rcv+0x2ee/0x430 netlink_unicast+0x543/0x7f0 netlink_sendmsg+0x918/0xe20 sock_sendmsg+0xcf/0x120 ____sys_sendmsg+0x70d/0x8b0 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd This will help debug the issues syzkaller is seeing. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-a7c81b3842ce+e5-netdev_tracker_jgg@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-11-28irqchip/sifive-plic: Support wake IRQsSamuel Holland
The PLIC does not define any special method for marking interrupts as wakeup-capable, so it should have the IRQCHIP_SKIP_SET_WAKE flag set. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221126194805.19431-1-samuel@sholland.org
2022-11-28USB: serial: cp210x: add Kamstrup RF sniffer PIDsBruno Thomsen
The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack. RF sniffers can analyze packets meta data including power level and perform packet injection. Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-28Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100) This series contains updates to various Intel drivers. Shang XiaoJing fixes init module error path stop to resource leaks for ixgbevf and i40e. Yuan Can also does the same for fm10k and iavf. Wang Hai stops freeing of skb as it was causing use after free error for e100. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28gpiolib: fix memory leak in gpiochip_setup_dev()Zeng Heng
Here is a backtrace report about memory leak detected in gpiochip_setup_dev(): unreferenced object 0xffff88810b406400 (size 512): comm "python3", pid 1682, jiffies 4295346908 (age 24.090s) backtrace: kmalloc_trace device_add device_private_init at drivers/base/core.c:3361 (inlined by) device_add at drivers/base/core.c:3411 cdev_device_add gpiolib_cdev_register gpiochip_setup_dev gpiochip_add_data_with_key gcdev_register() & gcdev_unregister() would call device_add() & device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to register/unregister device. However, if device_add() succeeds, some resource (like struct device_private allocated by device_private_init()) is not released by device_del(). Therefore, after device_add() succeeds by gcdev_register(), it needs to call put_device() to release resource in the error handle path. Here we move forward the register of release function, and let it release every piece of resource by put_device() instead of kfree(). While at it, fix another subtle issue, i.e. when gc->ngpio is equal to 0, we still call kcalloc() and, in case of further error, kfree() on the ZERO_PTR pointer, which is not NULL. It's not a bug per se, but rather waste of the resources and potentially wrong expectation about contents of the gdev->descs variable. Fixes: 159f3cd92f17 ("gpiolib: Defer gpio device setup until after gpiolib initialization") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-11-28power: supply: bq25890: Only use pdata->regulator_init_data for vbusHans de Goede
bq25890_platform_data.regulator_init_data is intended to only provide regulator init_data for the vbus regulator. Remove this from the regulator_config before registering the vsys regulator. Otherwise the regulator_register() call for vsys will fail because it tries to register duplicate consumer_dev_name + supply names from init_data->consumer_supplies[], leading to the entire probe of the bq25890 driver failing: [ 32.017501] bq25890-charger i2c-bq25892_main: Failed to set supply vbus [ 32.017525] bq25890-charger i2c-bq25892_main: error -EBUSY: registering vsys regulator [ 32.124978] bq25890-charger: probe of i2c-bq25892_main failed with error -16 Fixes: 14a3d159abf8 ("power: supply: bq25890: Add Vsys regulator") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-11-27Merge tag 'usb-6.1-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.1-rc7 that resolve some reported problems: - cdnsp driver fixes for reported problems - dwc3 fixes for some small reported problems - uvc gadget driver fix for reported regression All of these have been in linux-next with no reported problems" * tag 'usb-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1 usb: dwc3: gadget: Clear ep descriptor last usb: dwc3: exynos: Fix remove() function usb: cdnsp: Fix issue with Clear Feature Halt Endpoint usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer usb: gadget: uvc: also use try_format in set_format
2022-11-27Merge tag 'char-misc-6.1-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes for 6.1-rc7, they include: - build warning fix for the vdso when using new versions of grep - iio driver fixes for reported issues - small nvmem driver fixes - fpga Kconfig fix - interconnect dt binding fix All of these have been in linux-next with no reported issues" * tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lib/vdso: use "grep -E" instead of "egrep" nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear() nvmem: rmem: Fix return value check in rmem_read() fpga: m10bmc-sec: Fix kconfig dependencies dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid" iio: adc: aspeed: Remove the trim valid dts property. iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails iio: accel: bma400: Fix memory leak in bma400_get_steps_reg() iio: light: rpr0521: add missing Kconfig dependencies iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw iio: health: afe4403: Fix oob read in afe4403_read_raw iio: light: apds9960: fix wrong register for gesture gain dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
2022-11-27Merge tag 'timers_urgent_for_v6.1_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Return the proper timer register width (31 bits) for a 32-bit signed register in order to avoid a timer interrupt storm on ARM XGene-1 hardware running in NO_HZ mode * tag 'timers_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
2022-11-27Merge tag 'x86_urgent_for_v6.1_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - ioremap: mask out the bits which are not part of the physical address *after* the size computation is done to prevent any hypothetical ioremap failures - Change the MSR save/restore functionality during suspend to rely on flags denoting that the related MSRs are actually supported vs reading them and assuming they are (an Atom one allows reading but not writing, thus breaking this scheme at resume time) - prevent IV reuse in the AES-GCM communication scheme between SNP guests and the AMD secure processor * tag 'x86_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioremap: Fix page aligned size calculation in __ioremap_caller() x86/pm: Add enumeration check before spec MSRs save/restore setup x86/tsx: Add a feature bit for TSX control MSR support virt/sev-guest: Prevent IV reuse in the SNP guest driver
2022-11-27net: phy: fix null-ptr-deref while probe() failedYang Yingliang
I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-27Merge tag 'iio-fixes-for-6.1d' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 4th set of IIO fixes for 6.1 Single patch fixing a memory leak in an error path. Fine to queue either for 6.2 if too late for 6.1 * tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: fix memory leak in iio_device_register_eventset() dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid" iio: adc: aspeed: Remove the trim valid dts property. iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails iio: accel: bma400: Fix memory leak in bma400_get_steps_reg() iio: light: rpr0521: add missing Kconfig dependencies iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw iio: health: afe4403: Fix oob read in afe4403_read_raw iio: light: apds9960: fix wrong register for gesture gain
2022-11-27Merge tag 'iio-for-6.2b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of IIO new device support, cleanups etc for 6.2 Includes a few late breaking fixes for old issues. Contains a large set of conversions from i2c probe() to probe_new() as part of an attempt to finally get rid of the old style probe(). New devices support * adi,ad74115 - New driver for this complex input/output device with 16 bit ADCs, 14 bit DACs amongst other features. - A few tidy ups / removal of unused data patches followed. * adi,adf4377 - New driver for this dual output integer-N phased locked loop and VCO chip. * maxim,max30208 - New driver for this high accuracy digital temperature sensor. * st,lsm6dsx - Support for LSM6DS016IS (chip specific data) - Support for ISM330IS (id entry only) Minor cleanups etc * adi,adis - Fix a deadlock on device instance specific mutex. - Tidy up by calling unlocked form of __adis_initial_startup() in all cases and dropping the locked version. * adi,ad4130 - Reference spi-peripehral-props.yaml in the dt-binding. * adi,ad74413r - Fix a bug brought on by integer promotion of signed value to unsigned type. - Add an spi_device_id table to allow module autoloading to work. - Add support for reset pin. * adi,ad7606_par - devm_platform_get_and_ioremap_resource() instead of opencoding. * adi,ad7923 - Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar for ad7924. * adi,ltc2983 - Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this unit. * maxim,max11410 - Fix mask due to repeated use of VREFN instead of one of them being VREFP. * qcom,spmi-iadc - Add fallback compatibles to dt-binding. * renesas,rzg2l - Document use for RZ/Five SoC. * st,stm32-adc - Improved calibration support with error logging and a debugfs interface to read back the result. * ti,adc128s052 - Fix an issue with missing data members in the adc128_of_match table that meant all device were being handled as adc128s052 ADCs. * tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits) iio: addac: ad74413r: fix blank line after declaration warning iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl dt-bindings: iio: imu: st_lsm6dsx: add ism330is iio: imu: st_lsm6dsx: add support to ISM330IS iio: frequency: adf4377: add support for ADF4377 dt-bindings: iio: frequency: add adf4377 doc dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC iio: adc128s052: add proper .data members in adc128_of_match table iio: adc: stm32-adc: add debugfs to read raw calibration result iio: adc: stm32-adc: improve calibration error log iio: adc: stm32-adc: smart calibration support iio: addac: ad74413r: add support for reset-gpio dt-bindings: iio: ad74413r: add optional reset-gpios iio: addac: ad74413r: add spi_device_id table dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is iio: imu: st_lsm6dsx: add support to LSM6DSO16IS iio: addac: add AD74115 driver ...
2022-11-26power: supply: ab8500: Fix error handling in ab8500_charger_init()Yuan Can
The ab8500_charger_init() returns the platform_driver_register() directly without checking its return value, if platform_driver_register() failed, all ab8500_charger_component_drivers are not unregistered. Fix by unregister ab8500_charger_component_drivers when platform_driver_register() failed. Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-11-26pinctrl: sunxi: d1: Add CAN bus pinmuxesFabien Poussin
The D1 pin controller contains muxes for two CAN buses. While the CAN bus controllers are only documented for the T113 SoC, the pin controller is the same across all SoC variants. Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221126191636.6673-1-samuel@sholland.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-26counter: stm32-lptimer-cnt: fix the check on arr and cmp registers updateFabrice Gasnier
The ARR (auto reload register) and CMP (compare) registers are successively written. The status bits to check the update of these registers are polled together with regmap_read_poll_timeout(). The condition to end the loop may become true, even if one of the register isn't correctly updated. So ensure both status bits are set before clearing them. Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20221123133609.465614-1-fabrice.gasnier@foss.st.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-11-26irqchip/loongson-liointc: Fix improper error handling in liointc_init()Liu Peibao
For cores less than 4, eg, loongson2k1000 with 2 cores, the of_property_match_string() may return with an error value, which causes that liointc could not work. At least isr0 is what should be checked like previous commit b2c4c3969fd7 ("irqchip/loongson-liointc: irqchip add 2.0 version") did. Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support") Signed-off-by: Liu Peibao <liupeibao@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221104110712.23300-1-liupeibao@loongson.cn
2022-11-26irqchip/sl28cpld: Replace irqchip mask_invert with unmask_baseAidan MacDonald
Remove use of the deprecated mask_invert flag. Inverted mask registers (where a '1' bit enables an IRQ) can be described more directly as an unmask register. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221112152701.41990-1-aidanmacdonald.0x0@gmail.com
2022-11-26irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()Wei Yongjun
If of_iomap() failed, 'aic' should be freed before return. Otherwise there is a memory leak. Fixes: fead4dd49663 ("irqchip: Add driver for WPCM450 interrupt controller") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115092532.1704032-1-weiyongjun@huaweicloud.com
2022-11-26irqchip/st: Use device_get_match_data() to simplify the codeye xingchen
Directly get the match data with device_get_match_data(). Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/202211171916504943604@zte.com.cn
2022-11-26irqchip/al-fic: Drop obsolete dependency on COMPILE_TESTJean Delvare
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Talel Shenhar <talel@amazon.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221121161622.6294a899@endymion.delvare
2022-11-26irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()Shang XiaoJing
gic_probe() calls pm_runtime_get_sync() and added fail path as rpm_put to put usage_counter. However, pm_runtime_get_sync() will increment usage_counter even it failed. Fix it by replacing it with pm_runtime_resume_and_get() to keep usage counter balanced. Fixes: 9c8edddfc992 ("irqchip/gic: Add platform driver for non-root GICs that require RPM") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124065150.22809-1-shangxiaojing@huawei.com
2022-11-26irqchip/mips-gic: Drop repeated word in commentwangjianli
Delete the redundant word 'the'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022054655.36496-1-wangjianli@cdjrlc.com
2022-11-26irqchip/apple-aic: Mark aic_info structs __initconstKonrad Dybcio
These structs hold information used only at init time that never gets modified, hence mark them __initconst. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Suggested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221021235523.76585-1-konrad.dybcio@somainline.org
2022-11-26irqchip/loongson-pch-lpc: Add suspend/resume supportHuacai Chen
Add suspend/resume support for PCH-LPC irqchip, which is needed for upcoming suspend/hibernation. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221020073527.541845-5-chenhuacai@loongson.cn
2022-11-26irqchip/loongson-pch-pic: Add suspend/resume supportHuacai Chen
Add suspend/resume support for PCH-PIC irqchip, which is needed for upcoming suspend/hibernation. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221020073527.541845-4-chenhuacai@loongson.cn
2022-11-26irqchip/loongson-eiointc: Add suspend/resume supportHuacai Chen
Add suspend/resume support for EIOINTC irqchip, which is needed for upcoming suspend/hibernation. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221020073527.541845-3-chenhuacai@loongson.cn
2022-11-26irqchip/loongson-htvec: Add suspend/resume supportHuacai Chen
Add suspend/resume support for HTVEC irqchip, which is needed for upcoming suspend/hibernation. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221020073527.541845-2-chenhuacai@loongson.cn
2022-11-26irqchip/loongson-htvec: Add ACPI init supportHuacai Chen
HTVECINTC stands for "HyperTransport Interrupts" that described in Section 14.3 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Though the extended model is the recommended one, there are still some legacy model machines. So we add ACPI init support for HTVECINTC. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221020142535.1725573-1-chenhuacai@loongson.cn
2022-11-26irqchip/loongson-liointc: Support to set IRQ type for ACPI pathJianmin Lv
For ACPI path, the xlate callback used IRQ_TYPE_NONE and ignored the IRQ type in intspec[1]. For supporting to set type for IRQs of the irqdomain, intspec[1] should be used to get IRQ type. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-5-lvjianmin@loongson.cn
2022-11-26irqchip/loongson-pch-pic: Support to set IRQ type for ACPI pathJianmin Lv
For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored the IRQ type in fwspec->param[1]. For supporting to set type for IRQs of the irqdomain, fwspec->param[1] should be used to get IRQ type. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-4-lvjianmin@loongson.cn
2022-11-26irqchip/loongson-pch-pic: Fix translate callback for DT pathJianmin Lv
In DT path of translate callback, if fwspec->param_count==1 and of_node is non-null, fwspec->param[1] will be accessed, which is introduced from previous commit bcdd75c596c8 (irqchip/loongson-pch-pic: Add ACPI init support). Before the patch, for non-null of_node, translate callback (use irq_domain_translate_twocell()) will return -EINVAL if fwspec->param_count < 2, so the check in the patch is added. Fixes: bcdd75c596c8 ("irqchip/loongson-pch-pic: Add ACPI init support") Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-3-lvjianmin@loongson.cn
2022-11-26ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarityJianmin Lv
On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn
2022-11-26irqchip: loongarch-cpu: add DT supportLiu Peibao
LoongArch is coming to support booting with FDT, so DT support of this driver is desired. Signed-off-by: Liu Peibao <liupeibao@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221114113824.1880-2-liupeibao@loongson.cn
2022-11-26media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoCAakarsh Jain
Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7") which adds mfc v7 support for Exynos3250 and use the same compatible string as used by Exynos5240 but both the IPs are a bit different in terms of IP clock. Add variant driver data based on the new compatible string "samsung,exynos3250-mfc" for Exynos3250 SoC. Suggested-by: Alim Akhtar <alim.akhtar@samsung.com> Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7") Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 02:47:17 +0000