| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- two small cleanup patches
- a fix for PCI passthrough under Xen
- a four patch series speeding up virtio under Xen with user space
backends
* tag 'for-linus-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: Consider INTx disabled when MSI/MSI-X is enabled
xen: privcmd: Add support for ioeventfd
xen: evtchn: Allow shared registration of IRQ handers
xen: irqfd: Use _IOW instead of the internal _IOC() macro
xen: Make struct privcmd_irqfd's layout architecture independent
xen/xenbus: Add __counted_by for struct read_buffer and use struct_size()
xenbus: fix error exit in xenbus_init()
|
|
Currently, noinc writes are cached as if they were standard incrementing
writes, overwriting unrelated register values in the cache. Instead, we
want to cache the last value written to the register, as is done in the
accelerated noinc handler (regmap_noinc_readwrite).
Fixes: cdf6b11daa77 ("regmap: Add regmap_noinc_write API")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20231101142926.2722603-2-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Usual fixes and updates:
- Add up to 12 nops after TLB inserts for PA8x00 CPUs as the
specification requires (Dave Anglin)
- Simplify the parisc smp_prepare_boot_cpu() code (Russell King)
- Use 64-bit little-endian values in SBA IOMMU PDIR table for AGP
Since there is upcoming support for booting a 64-bit kernel on QEMU,
some corner cases were fixed and improvements added:
- Fix 64-bit kernel crash in STI (graphics console) font setup code
which miscalculated the font start address as it gets signed vs
unsigned offsets wrong
- Support building an uncompressed Linux kernel
- Add support for soft power-off in qemu"
* tag 'parisc-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
parisc: Show default CPU PSW.W setting as reported by PDC
parisc/pdc: Add width field to struct pdc_model
parisc: Add nop instructions after TLB inserts
parisc: simplify smp_prepare_boot_cpu()
parisc/agp: Use 64-bit LE values in SBA IOMMU PDIR table
parisc/firmware: Use PDC constants for narrow/wide firmware
parisc: Move parisc_narrow_firmware variable to header file
parisc/power: Trivial whitespace cleanups and license update
parisc/power: Add power soft-off when running on qemu
parisc: Allow building uncompressed Linux kernel
parisc: Add some missing PDC functions and constants
parisc: sba-iommu: Fix comment when calculating IOC number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
In order to reduce excessive memory mapping cost in live migration and
VM reboot, it is desirable to decouple the vhost-vdpa IOTLB abstraction
from the virtio device life cycle, i.e. mappings can be kept intact
across virtio device reset. Leverage the .reset_map callback, which is
meant to destroy the iotlb on the given ASID and recreate the 1:1
passthrough/identity mapping. To be consistent, the mapping on device
creation is initiailized to passthrough/identity with PA 1:1 mapped as
IOVA. With this the device .reset op doesn't have to maintain and clean
up memory mappings by itself.
Additionally, implement .compat_reset to cater for older userspace,
which may wish to see mapping to be cleared during reset.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <1697880319-4937-8-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Since commit 6f5312f80183 ("vdpa/mlx5: Add support for running with
virtio_vdpa"), mlx5_vdpa starts with preallocate 1:1 DMA MR at device
creation time. This 1:1 DMA MR will be implicitly destroyed while the
first .set_map call is invoked, in which case callers like vhost-vdpa
will start to set up custom mappings. When the .reset callback is
invoked, the custom mappings will be cleared and the 1:1 DMA MR will be
re-created.
In order to reduce excessive memory mapping cost in live migration, it
is desirable to decouple the vhost-vdpa IOTLB abstraction from the
virtio device life cycle, i.e. mappings can be kept around intact across
virtio device reset. Leverage the .reset_map callback, which is meant to
destroy the regular MR (including cvq mapping) on the given ASID and
recreate the initial DMA mapping. That way, the device .reset op runs
free from having to maintain and clean up memory mappings by itself.
Additionally, implement .compat_reset to cater for older userspace,
which may wish to see mapping to be cleared during reset.
Co-developed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1697880319-4937-7-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Using .compat_reset op from the previous patch, the buggy .reset
behaviour can be kept as-is on older userspace apps, which don't ack the
IOTLB_PERSIST backend feature. As this compatibility quirk is limited to
those drivers that used to be buggy in the past, it won't affect change
the behaviour or affect ABI on the setups with API compliant driver.
The separation of .compat_reset from the regular .reset allows
vhost-vdpa able to know which driver had broken behaviour before, so it
can apply the corresponding compatibility quirk to the individual driver
whenever needed. Compared to overloading the existing .reset with
flags, .compat_reset won't cause any extra burden to the implementation
of every compliant driver.
[mst: squashed in two fixup commits]
Message-Id: <1697880319-4937-6-git-send-email-si-wei.liu@oracle.com>
Message-Id: <1698102863-21122-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <1698275594-19204-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Userspace needs this feature flag to distinguish if vhost-vdpa iotlb in
the kernel can be trusted to persist IOTLB mapping across vDPA reset.
Without it, userspace has no way to tell apart if it's running on an
older kernel, which could silently drop all iotlb mapping across vDPA
reset, especially with broken parent driver implementation for the
.reset driver op. The broken driver may incorrectly drop all mappings of
its own as part of .reset, which inadvertently ends up with corrupted
mapping state between vhost-vdpa userspace and the kernel. As a
workaround, to make the mapping behaviour predictable across reset,
userspace has to pro-actively remove all mappings before vDPA reset, and
then restore all the mappings afterwards. This workaround is done
unconditionally on top of all parent drivers today, due to the parent
driver implementation issue and no means to differentiate. This
workaround had been utilized in QEMU since day one when the
corresponding vhost-vdpa userspace backend came to the world.
There are 3 cases that backend may claim this feature bit on for:
- parent device that has to work with platform IOMMU
- parent device with on-chip IOMMU that has the expected
.reset_map support in driver
- parent device with vendor specific IOMMU implementation with
persistent IOTLB mapping already that has to specifically
declare this backend feature
The reason why .reset_map is being one of the pre-condition for
persistent iotlb is because without it, vhost-vdpa can't switch back
iotlb to the initial state later on, especially for the on-chip IOMMU
case which starts with identity mapping at device creation. virtio-vdpa
requires on-chip IOMMU to perform 1:1 passthrough translation from PA to
IOVA as-is to begin with, and .reset_map is the only means to turn back
iotlb to the identity mapping mode after vhost-vdpa is gone.
The difference in behavior did not matter as QEMU unmaps all the memory
unregistering the memory listener at vhost_vdpa_dev_start( started =
false), but the backend acknowledging this feature flag allows QEMU to
make sure it is safe to skip this unmap & map in the case of vhost stop
& start cycle.
In that sense, this feature flag is actually a signal for userspace to
know that the driver bug has been solved. Not offering it indicates that
userspace cannot trust the kernel will retain the maps.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-4-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Devices with on-chip IOMMU or vendor specific IOTLB implementation may
need to restore iotlb mapping to the initial or default state using the
.reset_map op, as it's desirable for some parent devices to not work
with DMA ops and maintain a simple IOMMU model with .reset_map. In
particular, device reset should not cause mapping to go away on such
IOTLB model, so persistent mapping is implied across reset. Before the
userspace process using vhost-vdpa is gone, give it a chance to reset
iotlb back to the initial state in vhost_vdpa_cleanup().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-3-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Some buggy devices, the common cfg size may not match the features.
This patch checks the common cfg size for the
features(VIRTIO_F_NOTIF_CONFIG_DATA, VIRTIO_F_RING_RESET). When the
common cfg size does not match the corresponding feature, we fail the
probe and print error message.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231019034902.7346-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add checks to the check_offsets(void) for queue_notify_data and
queue_reset.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231010031120.81272-5-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <2023100643-tricolor-citizen-6c2d@gregkh>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Fix a misspelling of "preceding".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <b57b882675809f1f9dacbf42cf6b920b2bea9cba.1695903476.git.geert+renesas@glider.be>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
After commit 68f2736a8583 ("mm: Convert all PageMovable users to
movable_operations"), the execution path has been changed to
move_to_new_folio
movable_operations->migrate_page
balloon_page_migrate
balloon_page_migrate->balloon_page_migrate
balloon_page_migrate
Correct the outdated comment.
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Message-Id: <20230813140709.835536-1-xueshi.hu@smartx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
Offer this backend feature as mlx5 is compatible with it. It allows it
to do live migration with CVQ, dynamically switching between passthrough
and shadow virtqueue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230703142514.363256-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For the following sequence:
- cvq group is in ASID 0
- .set_map(1, cvq_iotlb)
- .set_group_asid(cvq_group, 1)
... the cvq mapping from ASID 0 will be used. This is not always correct
behaviour.
This patch adds support for the above mentioned flow by saving the iotlb
on each .set_map and updating the cvq iotlb with it on a cvq group change.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-18-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
They will be used in a follow-up patch.
For dup_iotlb, avoid the src == dst case. This is an error.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-17-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Vq descriptor mappings are supported in hardware by filling in an
additional mkey which contains the descriptor mappings to the hw vq.
A previous patch in this series added support for hw mkey (mr) creation
for ASID 1.
This patch fills in both the vq data and vq descriptor mkeys based on
group ASID mapping.
The feature is signaled to the vdpa core through the presence of the
.get_vq_desc_group op.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-16-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Introduce the vq descriptor group and mr per ASID. Until now
.set_map on ASID 1 was only updating the cvq iotlb. From now on it also
creates a mkey for it. The current patch doesn't use it but follow-up
patches will add hardware support for mapping the vq descriptors.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-15-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The current flow for updating an mr works directly on mvdev->mr which
makes it cumbersome to handle multiple new mr structs.
This patch makes the flow more straightforward by having
mlx5_vdpa_create_mr return a new mr which will update the old mr (if
any). The old mr will be deleted and unlinked from mvdev. For the case
when the iotlb is empty (not NULL), the old mr will be cleared.
This change paves the way for adding mrs for different ASIDs.
The initialized bool is no longer needed as mr is now a pointer in the
mlx5_vdpa_dev struct which will be NULL when not initialized.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-14-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The mutex is named like it is supposed to protect only the mkey but in
reality it is a global lock for all mr resources.
Shift the mutex to it's rightful location (struct mlx5_vdpa_dev) and
give it a more appropriate name.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-13-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
This patch adapts the mr creation/deletion code to be able to work with
any given mr struct pointer. All the APIs are adapted to take an extra
parameter for the mr.
mlx5_vdpa_create/delete_mr doesn't need a ASID parameter anymore. The
check is done in the caller instead (mlx5_set_map).
This change is needed for a followup patch which will introduce an
additional mr for the vq descriptor data.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-12-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Make mlx5_destroy_mr symmetric to mlx5_create_mr.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Now that the cvq code is out of mlx5_vdpa_create/destroy_mr, the "dvq"
functions can be folded into their callers.
Having "dvq" in the naming will no longer be accurate in the downstream
patches.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-10-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The reslock is taken while refresh is called but iommu_lock is more
specific to this resource. So take the iommu_lock during cvq iotlb
refresh.
Based on Eugenio's patch [0].
[0] https://lore.kernel.org/lkml/20230112142218.725622-4-eperezma@redhat.com/
Acked-by: Jason Wang <jasowang@redhat.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The handling of the cvq iotlb is currently coupled with the creation
and destruction of the hardware mkeys (mr).
This patch moves cvq iotlb handling into its own function and shifts it
to a scope that is not related to mr handling. As cvq handling is just a
prune_iotlb + dup_iotlb cycle, put it all in the same "update" function.
Finally, the destruction path is handled by directly pruning the iotlb.
After this move is done the ASID mr code can be collapsed into a single
function.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Necessary for upcoming cvq separation from mr allocation.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
With _F_DESC_ASID backend feature, the device can now support the
VHOST_VDPA_GET_VRING_DESC_GROUP ioctl, and it may expose the descriptor
table (including avail and used ring) in a different group than the
buffers it contains. This new uAPI will fetch the group ID of the
descriptor table.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Userspace knows if the device has dedicated descriptor group or not
by checking this feature bit.
It's only exposed if the vdpa driver backend implements the
.get_vq_desc_group() operation callback. Userspace trying to negotiate
this feature when it or the dependent _F_IOTLB_ASID feature hasn't
been exposed will result in an error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
lp55xx_write() can return an error code, add a check for this.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231020091930.207870-1-suhui@nfschina.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Include headers which we are direct users of, no need
to have proxies.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016161005.1471768-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The initial ret is not used anywhere, drop the unneeded assignment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016161005.1471768-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use temporary variable for struct device in gpio_led_probe() in order
to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016161005.1471768-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Instead of checking for the specific error codes, replace
devm_gpiod_get_index() with devm_gpiod_get_index_optional().
In this case we just return all errors to the caller and
simply check for NULL in case if legacy GPIO is being used.
As the result the code is easier to read and maintain.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016161005.1471768-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Avoid a boilerplate code by using PTR_ERR_OR_ZERO() in create_gpio_led().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016161005.1471768-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The of.h is used as a proxy to mod_devicetable, replace former by
latter.
The commit 2d6180147e92 ("leds: gpio: Configure per-LED pin control")
added yet another unneeded OF APIs. Replace with direct use of fwnode.
Altogether this makes driver agnostic to the firmware interface in use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231016161005.1471768-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The standard conditional pattern is to check for errors first and
bail out if any. Refactor led_update_brightness() accordingly.
While at it, drop unneeded assignment and return 0 unconditionally
on success.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Denis Osterland-Heim <denis.osterland@diehl.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231016153051.1409074-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
I have improperly refactored commits
4d5ed2621c24 ("leds: turris-omnia: Make set_brightness() more efficient")
and
aaf38273cf76 ("leds: turris-omnia: Support HW controlled mode via private trigger")
after Lee requested a change in API semantics of the new functions I
introduced in commit
28350bc0ac77 ("leds: turris-omnia: Do not use SMBUS calls").
Before the change, the function omnia_cmd_write_u8() returned 0 on
success, and afterwards it returned a positive value (number of bytes
written). The latter version was applied, but the following commits did
not properly account for this change.
This results in non-functional LED's .brightness_set_blocking() and
trigger's .activate() methods.
The main reasoning behind the semantics change was that read/write
methods should return the number of read/written bytes on success.
It was pointed to me [1] that this is not always true (for example the
regmap API does not do so), and since the driver never uses this number
of read/written bytes information, I decided to fix this issue by
changing the functions to the original semantics (return 0 on success).
[1] https://lore.kernel.org/linux-gpio/ZQnn+Gi0xVlsGCYA@smile.fi.intel.com/
Fixes: 28350bc0ac77 ("leds: turris-omnia: Do not use SMBUS calls")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20231016141538.30037-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move the mutex_init() to avoid redundant mutex_destroy() calls after
that for each time the probe fails.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231013022010.854367-1-chunyan.zhang@unisoc.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
GCC 13.2 complains about array subscript 17 is above array bounds of
'char[16]' with IFNAMSIZ set to 16.
The warning is correct but this scenario is impossible.
set_device_name is called by device_name_store (store sysfs entry) and
netdev_trig_activate.
device_name_store already check if size is >= of IFNAMSIZ and return
-EINVAL. (making the warning scenario impossible)
netdev_trig_activate works on already defined interface, where the name
has already been checked and should already follow the condition of
strlen() < IFNAMSIZ.
Aside from the scenario being impossible, set_device_name can be
improved to both mute the warning and make the function safer.
To make it safer, move size check from device_name_store directly to
set_device_name and prevent any out of bounds scenario.
Cc: stable@vger.kernel.org
Fixes: 28a6a2ef18ad ("leds: trigger: netdev: refactor code setting device name")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309192035.GTJEEbem-lkp@intel.com/
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231007131042.15032-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This commit adds support for Kinetic KTD2026/7 RGB/White LED driver.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20231002-ktd202x-v6-2-26be8eefeb88@apitzsch.eu
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The colors are already part of DT bindings. Make sure the kernel is
able to convert them to strings.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20231008144014.1180334-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
First of all, the fixed GPIO base is source of troubles and
it doesn't scale. Second, there is no in-kernel user of this
base, so drop it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231002135629.2605462-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-leds-maple-v1-4-ba5f9dcb1e75@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-leds-maple-v1-3-ba5f9dcb1e75@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-leds-maple-v1-2-ba5f9dcb1e75@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-leds-maple-v1-1-ba5f9dcb1e75@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
By providing a GPIO line as "trigger-sources" in the FWNODE
(such as from the device tree) and combining with the
GPIO trigger, we can support a GPIO LED trigger in a natural
way from the hardware description instead of using the
custom sysfs and deprecated global GPIO numberspace.
Example:
gpio: gpio@0 {
compatible "my-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
#trigger-source-cells = <2>;
};
leds {
compatible = "gpio-leds";
led-my-gpio {
label = "device:blue:myled";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "gpio";
trigger-sources = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
Make this the norm, unmark the driver as broken.
Delete the sysfs handling of GPIOs.
Since GPIO descriptors inherently can describe inversion,
the inversion handling can just be deleted.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230926-gpio-led-trigger-dt-v2-3-e06e458b788e@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
