| Age | Commit message (Collapse) | Author |
|---|
|
- Use PCIE_SPEED2MBS_ENC() macro in qcom host and endpoint to encode link
speed instead of hard-coding the link speed in MBps (Manivannan
Sadhasivam)
- Use Mbps_to_icc() (not MBps_to_icc()) in tegra194 instead of explicitly
doing the bytes-to-bits conversion (Manivannan Sadhasivam)
* pci/controller/speed:
PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed
PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
|
|
- Add generic T_PVPERL macro for the required interval between power being
stable and PERST# being inactive (Yoshihiro Shimoda)
- Factor out dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda)
- Update PCI_EXP_LNKCAP_MLW so Link Capabilities shows the correct max link
width (Yoshihiro Shimoda)
- Drop tegra194 PCI_EXP_LNKCAP_MLW setting since dw_pcie_setup() already
does it (Yoshihiro Shimoda)
- Add dwc support for different dbi and dbi2 register offsets, to be used
for R-Car Gen4 controllers (Yoshihiro Shimoda)
- Add EDMA_UNROLL capability flag for R-Car Gen4 controllers that don't
correctly advertise unrolled mapping via their eDMA CTRL register
(Yoshihiro Shimoda)
- Export dw_pcie_ep_exit() for use by the modular R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add .pre_init() and .deinit() hooks for use by R-Car Gen4 controllers
(Yoshihiro Shimoda)
- Increase snps,dw-pcie DT reg and reg-names maxItems for R-Car Gen4
controllers (Yoshihiro Shimoda)
- Add rcar-gen4-pci host and endpoint DT bindings and drivers (Yoshihiro
Shimoda)
- Add Renesas R8A779F0 Device ID to pci_endpoint_test to allow testing on
R-Car S4-8 (Yoshihiro Shimoda)
* pci/controller/rcar:
misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
PCI: rcar-gen4: Add endpoint mode support
PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
dt-bindings: PCI: dwc: Update maxItems of reg and reg-names
PCI: dwc: endpoint: Introduce .pre_init() and .deinit()
PCI: dwc: Expose dw_pcie_write_dbi2() to module
PCI: dwc: Expose dw_pcie_ep_exit() to module
PCI: dwc: Add EDMA_UNROLL capability flag
PCI: dwc: endpoint: Add multiple PFs support for dbi2
PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting
PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling
PCI: dwc: Add dw_pcie_link_set_max_link_width()
PCI: Add T_PVPERL macro
|
|
- Add qcom-ep callback to write DBI2 registers (Manivannan Sadhasivam)
* pci/controller/qcom-ep:
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
|
|
- Set 64-bit DMA mask for layerscape-ep (Guanhua Gao)
* pci/controller/layerscape:
PCI: layerscape-ep: Set 64-bit DMA mask
|
|
- Annotate struct hv_dr_state with __counted_by to prepare for array access
bounds checking (Kees Cook)
* pci/controller/hyperv:
PCI: hv: Annotate struct hv_dr_state with __counted_by
|
|
- Drop unused struct cdns_plat_pcie.is_rc member (Li Chen)
* pci/controller/cadence:
PCI: cadence: Drop unused member from struct cdns_plat_pcie
|
|
- Add a dwc .host_post_init() callback for configuration after downstream
devices are scanned (Manivannan Sadhasivam)
- Enable ASPM for devices below qcom 1.9.0 host controllers (Manivannan
Sadhasivam)
* pci/controller/aspm:
PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops
PCI: dwc: Add host_post_init() callback
|
|
- Add pci_is_vga() helper, which checks for both PCI_CLASS_DISPLAY_VGA and
PCI_CLASS_NOT_DEFINED_VGA (which catches ancient devices built before
Class Codes were defined) (Sui Jingfeng)
- Use the new pci_is_vga() to identify devices for the VGA arbiter, the
sysfs "boot_vga" attribute, and the virtio and qxl drivers (SUi Jingfeng)
* pci/vga:
drm/qxl: Use pci_is_vga() to identify VGA devices
drm/virtio: Use pci_is_vga() to identify VGA devices
PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga()
PCI/VGA: Select VGA devices earlier
PCI/VGA: Use pci_is_vga() to identify VGA devices
PCI: Add pci_is_vga() helper
|
|
- Lengthen reset delay for VideoPropulsion Torrent QN16e card, which seems
to require longer delay than spec requires (Lukas Wunner)
* pci/reset:
PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
|
|
- Protect driver's D3cold preference from being overwritten by user space
via sysfs (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 to fix
wakeup by USB4-attached devices (Mario Limonciello)
* pci/pm:
x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
PCI/sysfs: Protect driver's D3cold preference from user space
|
|
- Move struct dev_pagemap (a flexible structure) to end of struct
pci_p2pdma_pagemap to avoid overwriting things after dev_pagemap
(Gustavo A. R. Silva)
* pci/p2pdma:
PCI/P2PDMA: Remove redundant goto
PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap
|
|
- Add driver for Ampere Altra Attention Indicators (D Scott Phillips)
* pci/hotplug:
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI: acpiphp: Allow built-in drivers for Attention Indicators
|
|
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY
devices (Sui Jingfeng)
- Fix a vmd check for multi-function devices (Ilpo Järvinen)
- Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen)
- Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko)
- Keep .remove() and .probe() callbacks (previously marked __init) in case
they're used via sysfs (Uwe Kleine-König)
* pci/enumeration:
PCI: keystone: Don't discard .probe() callback
PCI: keystone: Don't discard .remove() callback
PCI: kirin: Don't discard .remove() callback
PCI: exynos: Don't discard .remove() callback
PCI/ACPI: Use acpi_evaluate_dsm_typed()
PCI: Use PCI_HEADER_TYPE_* instead of literals
PCI: Add PCI_HEADER_TYPE_MFD definition
PCI: vmd: Correct PCI Header Type Register's multi-function check
drm/radeon: Use pci_get_base_class() to reduce duplicated code
drm/amdgpu: Use pci_get_base_class() to reduce duplicated code
drm/nouveau: Use pci_get_base_class() to reduce duplicated code
ALSA: hda: Use pci_get_base_class() to reduce duplicated code
PCI: Add pci_get_base_class() helper
|
|
- Use IS_ERR_OR_NULL() helper function instead of open-coding it (Ruan
Jinjie)
* pci/endpoint:
PCI: endpoint: Use IS_ERR_OR_NULL() helper function
|
|
- Disable ATS for Intel IPU E2000 A- and B-stepping devices to avoid
invalidation message endianness erratum (Bartosz Pawlowski)
* pci/ats:
PCI: Disable ATS for specific Intel IPU E2000 devices
PCI: Extract ATS disabling to a helper function
|
|
* pci/aspm:
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"
PCI/ASPM: Convert printk() to pr_*() and add include
PCI/ASPM: Remove unnecessary includes
PCI/ASPM: Use FIELD_MAX() instead of literals
PCI/ASPM: Use time constants
PCI/ASPM: Return U32_MAX instead of bit magic construct
PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields
PCI: Add PCI_L1SS_CTL2 fields
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
|
|
The MAX31785 has shown erratic behaviour across multiple system
designs, unexpectedly clock stretching and NAKing transactions.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20231027044346.2167548-1-lakshmiy@us.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA237 "85-V, 16-Bit, Precision Power Monitor With I2C Interface" is
basically the same as INA328. Therefore add a corresponding compatible
to the driver.
According to the datasheet the main difference is the current and power
monitoring accuracy:
+------------------------+---------------+---------------+
| | INA238 | INA237 |
+------------------------+---------------+---------------+
| Offset voltage | +/- 5µV | +/- 50µV |
| Offset drift | +/- 0.02µV/°C | +/- 0.02µV/°C |
| Gain error | +/- 0.1% | +/- 0.3% |
| Gain error drift | +/- 25ppm/°C | +/- 50ppm/°C |
| Common mode rejection | 140dB | 120dB |
| Power accuracy | 0.7% | 1.6% |
+------------------------+---------------+---------------+
As well as the missing DEVICE_ID register at 0x3F, which is currently
not in use by the driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20231026-ina237-v2-1-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Only the temp sensors that I can verify are present.
T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.
The other sensors are as found on the X670E Hero.
Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add missing implementation for the max31827 supply regulator.
This is a hardware required property that is not handled.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230925122929.10610-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA3221 allows the Critical alert pin to be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to compare
the combined sum to the programmed limit. The Shunt-Voltage Sum Limit
register contains the programmed value that is compared to the value in
the Shunt-Voltage Sum register in order to determine if the total summed
limit is exceeded. If the shunt-voltage sum limit value is exceeded, the
Critical alert pin pulls low.
For the summation limit to have a meaningful value, we have to use the
same shunt-resistor value on all included channels. Unless equal
shunt-resistor values are used for each channel, the summation control
function cannot be used and it is not enabled by the driver.
To address this, add support to disable the summation of specific
channels via device tree property "ti,summation-disable". The channel
which has this property would be excluded from the calculation of
summation control function.
For example, summation control function calculates Shunt-Voltage Sum as:
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel2
+ input_shunt_voltage_channel3
If we want the summation to only use channel1 and channel3, we can add
'ti,summation-disable' property in device tree node for channel2. Then
the calculation will skip channel2.
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel3
Note that we only want the channel to be skipped for summation control
function rather than completely disabled. Therefore, even if we add the
property 'ti,summation-disable', the channel is still enabled and
functional.
Finally, create debugfs entries that display if summation is disabled
for each of the channels.
Signed-off-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Co-developed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230929103650.86074-4-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MPQ2286 is a programmable, high frequency synchronous buck regulator
designed to power a variety of Automotive system peripherals. Single buck
converters with hardware monitoring capability is configurable over PMBus
interface.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-5-saravanan@linumiz.com
[groeck: Updated subject (mpq2286 -> mpq7932)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The bindings for single instance regulator should be named with no instance
(e.g., buck not buck0). Introduce a new helper macro to define the single pmbus
regulator.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-4-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Get page count using compatible match to support the series of chipsets
which differs in number of regualator/page.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-2-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is nothing in the datasheet indicating that the 1ms error is
needed and I didn't encounter any error during testing with 140ms wait
time.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Used enums and while loops to replace switch for selecting and getting
update interval from conversion rate bits.
Divided the write_alarm_val function into 2 functions. The new function
is more generic: it can be used not only for alarm writes, but for any
kind of writes which require the device to be in shutdown mode.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-1-daniel.matyas@analog.com
[groeck: Reverted error return value change (EOPNOTSUPP -> EINVAL)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This value was found on an ASRock X670E Taichi with an
NCT6686D chip.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://lore.kernel.org/r/20231023182442.21943-1-akoskovich@pm.me
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Do not allow setting shunt resistor to 0. This results in a division by
zero when performing current value computations based on input voltages
and connected resistor values.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231011135754.13508-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
npcm7xx_pwm_config_set() can return '-ENODEV' for failed. So check
the value of 'ret' after calling npcm7xx_pwm_config_set().
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231020085518.198477-1-suhui@nfschina.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently the local variable hum is being divided by a constant and
the results is being re-assigned back to hum before the value is being
returned to the caller. The assignment to hum is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/hwmon/hs3001.c:65:9: warning: Although the value stored to 'hum'
is used in the enclosing expression, the value is never actually read
from 'hum' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231023135828.667297-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20231024062018.23839-6-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use new helper acpi_use_parent_companion to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
When adapters are chained in a sparse manner (with intermediate MFD devices,
for instance) the code currently fails to use the correct subclass for
the adapter's bus_lock which leads to false-positive lockdep warnings.
Fix this by walking the entire pedigree of the device and count all
adapters along the way instead of just checking the immediate parent.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add kernel-doc for 'slave' and 'irq' in struct axxia_i2c_dev.
Drop kernel-doc notation ("/**") for static functions since they
are not usually documented with kernel-doc.
Prevents these kernel-doc warnings:
i2c-axxia.c:150: warning: Function parameter or member 'slave' not described in 'axxia_i2c_dev'
i2c-axxia.c:150: warning: Function parameter or member 'irq' not described in 'axxia_i2c_dev'
i2c-axxia.c:172: warning: Function parameter or member 'ns' not described in 'ns_to_clk'
i2c-axxia.c:172: warning: Function parameter or member 'clk_mhz' not described in 'ns_to_clk'
i2c-axxia.c:172: warning: No description found for return value of 'ns_to_clk'
i2c-axxia.c:271: warning: Function parameter or member 'idev' not described in 'axxia_i2c_empty_rx_fifo'
i2c-axxia.c:271: warning: No description found for return value of 'axxia_i2c_empty_rx_fifo'
i2c-axxia.c:303: warning: Function parameter or member 'idev' not described in 'axxia_i2c_fill_tx_fifo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202310181049.Vo62moV1-lkp@intel.com/
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
disk_check_media_change is mostly called from ->open where it makes
little sense to mark the file system on the device as dead, as we
are just opening it. So instead of calling bdev_mark_dead from
disk_check_media_change move it into the few callers that are not
in an open instance. This avoid calling into bdev_mark_dead and
thus taking s_umount with open_mutex held.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Coverity has noticed that the printing of error message in
register_cache() uses already freed bdev_handle to get to bdev. In fact
the problem has been there even before commit "bcache: Convert to
bdev_open_by_path()" just a bit more subtle one - cache object itself
could have been freed by the time we looked at ca->bdev and we don't
hold any reference to bdev either so even that could in principle go
away (due to device unplug or similar). Fix all these problems by
printing the error message before closing the bdev.
Fixes: dc893f51d24a ("bcache: Convert to bdev_open_by_path()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231004093757.11560-1-jack@suse.cz
Asked-by: Coly Li <colyli@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert iblock and pscsi drivers to use bdev_open_by_path() and pass the
handle around.
CC: target-devel@vger.kernel.org
CC: linux-scsi@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-15-jack@suse.cz
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert dasd to use bdev_open_by_path() and pass the handle around.
CC: linux-s390@vger.kernel.org
CC: Christian Borntraeger <borntraeger@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-14-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert nvmet to use bdev_open_by_path() and pass the handle around.
CC: linux-nvme@lists.infradead.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-13-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert block2mtd to use bdev_open_by_dev() and bdev_open_by_path() and
pass the handle around.
CC: Joern Engel <joern@lazybastard.org>
CC: linux-mtd@lists.infradead.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-12-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert md to use bdev_open_by_dev() and pass the handle around. We also
don't need the 'Holder' flag anymore so remove it.
CC: linux-raid@vger.kernel.org
CC: Song Liu <song@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-11-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert device mapper to use bdev_open_by_dev() and pass the handle
around.
CC: Alasdair Kergon <agk@redhat.com>
CC: Mike Snitzer <snitzer@kernel.org>
CC: dm-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-10-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert bcache to use bdev_open_by_path() and pass the handle around.
CC: linux-bcache@vger.kernel.org
CC: Coly Li <colyli@suse.de>
CC: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-9-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert zram to use bdev_open_by_dev() and pass the handle around.
CC: Minchan Kim <minchan@kernel.org>
CC: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-8-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert xen/blkback to use bdev_open_by_dev() and pass the
handle around.
CC: xen-devel@lists.xenproject.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-7-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert rnbd-srv to use bdev_open_by_path() and pass the handle
around.
CC: Jack Wang <jinpu.wang@ionos.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
Acked-by: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-6-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert pktcdvd to use bdev_open_by_dev().
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-5-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
