summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-22drm/amdgpu: fix pm sysfs node handling (v2)Alex Deucher
Fix typos that prevented them from showing up. v2: switch other files in addition to pp_clk_voltage Fixes: 4e01847c38f7a5 ("drm/amdgpu: optimize amdgpu device attribute code") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1150 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Evan Quan <evan.quan@amd.com>
2020-05-22drm/amdgpu: move gpu_info parsing after common early initAlex Deucher
We need to get the silicon revision id before we parse the firmware in order to load the correct gpu info firmware for raven2 variants. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1103 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22drm/amdgpu: move discovery gfx config fetchingAlex Deucher
Move it into the fw_info function since it's logically part of the same functionality. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-22efi/efivars: Add missing kobject_put() in sysfs entry creation error pathArd Biesheuvel
The documentation provided by kobject_init_and_add() clearly spells out the need to call kobject_put() on the kobject if an error is returned. Add this missing call to the error path. Cc: <stable@vger.kernel.org> Reported-by: 亿一 <teroincn@gmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-22tpm: eventlog: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. Also, the following issue shows up due to the flexible-array member having incomplete type[4]: drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_start’: drivers/char/tpm/eventlog/tpm2.c:54:46: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’} 54 | size = sizeof(struct tcg_pcr_event) - sizeof(event_header->event) | ^ drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_next’: drivers/char/tpm/eventlog/tpm2.c:102:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’} 102 | sizeof(event_header->event) + event_header->event_size; | ^ drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_binary_bios_measurements_show’: drivers/char/tpm/eventlog/tpm2.c:140:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’} 140 | sizeof(event_header->event) + event_header->event_size; | ^ scripts/Makefile.build:266: recipe for target 'drivers/char/tpm/eventlog/tpm2.o' failed make[3]: *** [drivers/char/tpm/eventlog/tpm2.o] Error 1 As mentioned above: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] As in "sizeof(event_header->event) always evaluated to 0, so removing it has no effect". Lastly, make use of the struct_size() helper to deal with the flexible array member and its host structure. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") [4] https://github.com/KSPP/linux/issues/43 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-05-22tpm/tpm_ftpm_tee: Use UUID API for exporting the UUIDAndy Shevchenko
There is export_uuid() function which exports uuid_t to the u8 array. Use it instead of open coding variant. This allows to hide the uuid_t internals. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-05-22efi/libstub: Use pool allocation for the command lineArd Biesheuvel
Now that we removed the memory limit for the allocation of the command line, there is no longer a need to use the page based allocator so switch to a pool allocation instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-22efi/libstub: Don't parse overlong command linesArvind Sankar
Check if the command line passed in is larger than COMMAND_LINE_SIZE, and truncate it to the last full argument if so. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200521002921.69650-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-22block: remove the error_sector argument to blkdev_issue_flushChristoph Hellwig
The argument isn't used by any caller, and drivers don't fill out bi_sector for flush requests either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-23crypto: hisilicon/qm - change debugfs file name from qm_regs to regsShukun Tan
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix is required. Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: hisilicon/qm - add DebugFS for xQC and xQE dumpShukun Tan
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE. Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: hisilicon/zip - add debugfs for Hisilicon ZIPLongfang Liu
Hisilicon ZIP engine driver uses debugfs to provides IO operation debug information Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: hisilicon/hpre - add debugfs for Hisilicon HPREHui Tang
Add debugfs to provides IO operation debug information and add BD processing timeout count function Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: hisilicon/sec2 - add debugfs for Hisilicon SECKai Ye
Hisilicon SEC engine driver uses debugfs to provides IO operation debug information Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: hisilicon/qm - add debugfs to the QM state machineLongfang Liu
The QM driver uses debugfs to provides the current state of the QM state machine Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: hisilicon/qm - add debugfs for QMLongfang Liu
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM for HPRE/ZIP/SEC drivers. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - protect from concurrent accessesNicolas Toromanoff
Protect STM32 CRC device from concurrent accesses. As we create a spinlocked section that increase with buffer size, we provide a module parameter to release the pressure by splitting critical section in chunks. Size of each chunk is defined in burst_size module parameter. By default burst_size=0, i.e. don't split incoming buffer. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - don't sleep in runtime pmNicolas Toromanoff
Ensure stm32_crc_update() and stm32_crc_init() can be called in atomic context and can't sleep. Add pm_runtime_irq_safe() to make pm_runtime_get_sync() atomic. Change runtime pm to call clk_enable()/clk_disable() and change system pm to unprepare/prepare the clock and force runtime pm suspend/resume. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - fix multi-instanceNicolas Toromanoff
Ensure CRC algorithm is registered only once in crypto framework when there are several instances of CRC devices. Update the CRC device list management to avoid that only the first CRC instance is used. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - fix run-time self test issue.Nicolas Toromanoff
Fix wrong crc32 initialisation value: "alg: shash: stm32_crc32 test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer" cra_name="crc32c" expects an init value of 0XFFFFFFFF, cra_name="crc32" expects an init value of 0. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - fix ext4 chksum BUG_ON()Nicolas Toromanoff
Allow use of crc_update without prior call to crc_init. And change (and fix) driver to use CRC device even on unaligned buffers. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-22Merge tag 'ib-mfd-hwmon-v5.8' into hwmon-nextGuenter Roeck
Immutable branch between MFD and HWMON due for the v5.8 merge window
2020-05-22hwmon: Add amd_energy driver to report energy countersNaveen Krishna Chatradhi
This patch adds hwmon based amd_energy driver support for family 17h processors from AMD. The driver provides following interface to the userspace 1. Reports the per core consumption * file: "energy%d_input", label: "Ecore%03d" 2. Reports per socket energy consumption * file: "energy%d_input", label: "Esocket%d" 3. To, increase the wrap around time of the socket energy counters, a 64bit accumultor is implemented. 4. Reports scaled energy value in Joules. Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20200519155011.56184-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (nct7802) Replace container_of() APIhailizheng
Replace container_of() API with kobj_to_dev(). Signed-off-by: hailizheng <haili.zheng@powercore.com.cn> Link: https://lore.kernel.org/r/1589891119-16508-1-git-send-email-haili.zheng@powercore.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (lm90) Add max6654 support to lm90 driverJosh Lehan
Add support for the Maxim MAX6654 to the lm90 driver. The MAX6654 is a temperature sensor, similar to the others, but with some differences regarding the configuration register, and the sampling rate at which extended resolution becomes possible. Signed-off-by: Josh Lehan <krellan@google.com> Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon : (nct6775) Use kobj_to_dev() APIzhouchuangao
Use kobj_to_dev() API instead of container_of(). Signed-off-by: zhouchuangao <zhouchuangao@xiaomi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (pmbus) Driver for Maxim MAX16601Guenter Roeck
MAX16601 is a VR13.HC Dual-Output Voltage Regulator Chipset, implementing a (8+1) multiphase synchronous buck converter. Cc: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'Guenter Roeck
The 'currpage' and 'currphase' variables in struct pmbus_data are used by the PMBus core to determine if the phase or page value has changed. Both are initialized with values which are never expected to be set in the code to ensure that the first page/phase write operation is actually performed. This is not well explained and occasionally causes confusion. Change the type of both variables to s16 and initialize with -1 to ensure that the initial value never matches a requested value, and clarify that this value means "unknown/unset". Cc: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (adt7411) update contact emailWolfram Sang
My 'pengutronix' address is defunct for years. Merge the entries and use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200502142700.19254-1-wsa@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (lm75) Fix all coding-style warnings on lm75 driverMichal Orzel
Check/fix all warnings generated by checkpatch.pl script on LM75 driver. Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: Reduce indentation level in __hwmon_device_register()Akinobu Mita
Reduce indentation level in __hwmon_device_register() by preparing a helper function. This just improves code readability. No functional change. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (ina2xx) Implement alert functionsAlex Qiu
Implement alert functions for INA226, INA230 and INA231. Expose 06h Mask/Enable and 07h Alert Limit registers via alert setting and alarm files. Signed-off-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (lm70) Add support for ACPIAndrej Picej
This commit adds support for lm70 commpatible drivers with systems that use ACPI. Signed-off-by: Andrej Picej <andpicej@gmail.com> [groeck: Fix various issues seen if CONFIG_ACPI=n] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (dell-smm) Use one DMI match for all XPS modelsThomas Hebb
Currently, each new XPS has to be added manually for module autoloading to work. Since fan multiplier autodetection should work fine on all XPS models, just match them all with one block like is done for Precision and Studio. The only match we replace that doesn't already use autodetection is "XPS13" which, according to Google, only matches the XPS 13 9333. (All other XPS 13 models have "XPS" as its own word, surrounded by spaces.) According to the thread at [1], autodetection works for the XPS 13 9333, meaning this shouldn't regress it. I do not own one to confirm with, though. Tested on an XPS 13 9350 and confirmed the module now autoloads and reports reasonable-looking data. I am using BIOS 1.12.2 and do not see any freezes when querying fan speed. [1] https://lore.kernel.org/patchwork/patch/525367/ Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/5d7e498b83e89ce7c41a449b61919c65d0770b73.1586033337.git.tommyhebb@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (nct7904) Add watchdog functionYuechao Zhao
Implement watchdog functionality for NCT7904. Signed-off-by: Yuechao Zhao <yuechao.zhao@advantech.com.cn> Link: https://lore.kernel.org/r/20200331052850.5419-1-yuechao.zhao@advantech.com.cn [groeck: Squashed fixup patch] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22Merge series "spi: dw: Add generic DW DMA controller support" from Serge ↵Mark Brown
Semin <Sergey.Semin@baikalelectronics.ru>: Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW APB SSI devices embedded into the SoC. Currently the DMA-based transfers are supported by the DW APB SPI driver only as a middle layer code for Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal platform DMAC device we introduced a set of patches to fix it within this series. First of all we need to add the Tx and Rx DMA channels support into the DW APB SSI binding. Then there are several fixes and cleanups provided as a initial preparation for the Generic DMA support integration: add Tx/Rx finish wait methods, clear DMAC register when done or stopped, Fix native CS being unset, enable interrupts in accordance with DMA xfer mode, discard static DW DMA slave structures, discard unused void priv pointer and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst length parametrisation and make sure it's optionally set in accordance with the DMA max-burst capability. In order to have the DW APB SSI MMIO driver working with DMA we need to initialize the paddr field with the physical base address of the DW APB SSI registers space. Then we unpin the Intel MID specific code from the generic DMA one and placed it into the spi-dw-pci.c driver, which is a better place for it anyway. After that the naming cleanups are performed since the code is going to be used for a generic DMAC device. Finally the Generic DMA initialization can be added to the generic version of the DW APB SSI IP. Last but not least we traditionally convert the legacy plain text-based dt-binding file with yaml-based one and as a cherry on a cake replace the manually written DebugFS registers read method with a ready-to-use for the same purpose regset32 DebugFS interface usage. This patchset is rebased and tested on the spi/for-next (5.7-rc5): base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next") Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/ Changelog v2: - Rebase on top of the spi repository for-next branch. - Move bindings conversion patch to the tail of the series. - Move fixes to the head of the series. - Apply as many changes as possible to be applied the Generic DMA functionality support is added and the spi-dw-mid is moved to the spi-dw-dma driver. - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized" since the problem has already been fixed. - Add new patch "spi: dw: Discard unused void priv pointer". - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure". n_bytes member of the DW SPI data can be used instead. - Build the DMA functionality into the DW APB SSI core if required instead of creating a separate kernel module. - Use conditional statement instead of the ternary operator in the ref clock getter. Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/ Changelog v3: - Use spi_delay_exec() method to wait for the DMA operation completion. - Explicitly initialize the dw_dma_slave members on stack. - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold setting from the patch where we just add the default burst length constants. - Use min() method to calculate the optimal burst values. - Add new patch which moves the spi-dw.c source file to spi-dw-core.c in order to preserve the DW APB SSI core driver name. - Add commas in the debugfs_reg32 structure initializer and after the last entry of the dw_spi_dbgfs_regs array. Link: https://lore.kernel.org/linux-spi/20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru Changelog v4: - Get back ndelay() method to wait for an SPI transfer completion. spi_delay_exec() isn't suitable for the atomic context. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru> Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru> Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-spi@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Serge Semin (16): spi: dw: Add Tx/Rx finish wait methods to the MID DMA spi: dw: Enable interrupts in accordance with DMA xfer mode spi: dw: Discard static DW DMA slave structures spi: dw: Discard unused void priv pointer spi: dw: Discard dma_width member of the dw_spi structure spi: dw: Parameterize the DMA Rx/Tx burst length spi: dw: Use DMA max burst to set the request thresholds spi: dw: Fix Rx-only DMA transfers spi: dw: Add core suffix to the DW APB SSI core source file spi: dw: Move Non-DMA code to the DW PCIe-SPI driver spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core spi: dw: Cleanup generic DW DMA code namings spi: dw: Add DMA support to the DW SPI MMIO driver spi: dw: Use regset32 DebugFS method to create regdump file dt-bindings: spi: Convert DW SPI binding to DT schema .../bindings/spi/snps,dw-apb-ssi.txt | 44 --- .../bindings/spi/snps,dw-apb-ssi.yaml | 127 +++++++++ .../devicetree/bindings/spi/spi-dw.txt | 24 -- drivers/spi/Kconfig | 15 +- drivers/spi/Makefile | 5 +- drivers/spi/{spi-dw.c => spi-dw-core.c} | 88 ++---- drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} | 261 ++++++++++-------- drivers/spi/spi-dw-mmio.c | 4 + drivers/spi/spi-dw-pci.c | 50 +++- drivers/spi/spi-dw.h | 33 ++- 10 files changed, 392 insertions(+), 259 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%) rename drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} (55%) -- 2.25.1
2020-05-22spi: rb4xx: update driver to be device tree awareChristopher Hill
This patch updates the spi driver spi-rb4xx.c to be device tree aware Signed-off-by: Christopher Hill <ch6574@gmail.com> Link: https://lore.kernel.org/r/20200521183631.37806-2-ch6574@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: rb4xx: null pointer bug fixChristopher Hill
This patch fixes a null pointer bug in the spi driver spi-rb4xx.c by moving the private data initialization to earlier in probe Signed-off-by: Christopher Hill <ch6574@gmail.com> Link: https://lore.kernel.org/r/20200521183631.37806-1-ch6574@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Discard dma_width member of the dw_spi structureSerge Semin
This member has exactly the same value as n_bytes of the DW SPI private data object, it's calculated at the same point of the transfer method, n_bytes isn't changed during the whole transfer, and they even serve for the same purpose - keep number of bytes per transfer word, though the dma_width is used only to calculate the DMA source/destination addresses width, which n_bytes could be also utilized for. Taking all of these into account let's replace the dma_width member usage with n_bytes one and remove the former. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Discard unused void priv pointerSerge Semin
Seeing the "void *priv" member of the dw_spi data structure is unused let's remove it. The glue-layers can embed the DW APB SSI controller descriptor into their private data object. MMIO driver for instance already utilizes that design pattern. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Discard static DW DMA slave structuresSerge Semin
Having them declared is redundant since each struct dw_dma_chan has the same structure embedded and the structure from the passed dma_chan private pointer will be copied there as a result of the next calls chain: dma_request_channel() -> find_candidate() -> dma_chan_get() -> device_alloc_chan_resources() = dwc_alloc_chan_resources() -> dw_dma_filter(). So just remove the static dw_dma_chan structures and use a locally declared data instance with dst_id/src_id set to the same values as the static copies used to have. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Enable interrupts in accordance with DMA xfer modeSerge Semin
It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22mt76: mt7915: Fix build errorYueHaibing
In file included from ./include/linux/firmware.h:6:0, from drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:4: In function ‘__mt7915_mcu_msg_send’, inlined from ‘mt7915_mcu_send_message’ at drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:370:6: ./include/linux/compiler.h:396:38: error: call to ‘__compiletime_assert_545’ declared with attribute error: BUILD_BUG_ON failed: cmd == MCU_EXT_CMD_EFUSE_ACCESS && mcu_txd->set_query != MCU_Q_QUERY _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:377:4: note: in definition of macro ‘__compiletime_assert’ prefix ## suffix(); \ ^~~~~~ ./include/linux/compiler.h:396:2: note: in expansion of macro ‘_compiletime_assert’ _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^~~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’ #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’ BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^~~~~~~~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:280:2: note: in expansion of macro ‘BUILD_BUG_ON’ BUILD_BUG_ON(cmd == MCU_EXT_CMD_EFUSE_ACCESS && ^~~~~~~~~~~~ BUILD_BUG_ON is meaningless here, chang it to WARN_ON. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200522034533.61716-1-yuehaibing@huawei.com
2020-05-22regulator: max8998: Add charger regulatorJonathan Bakker
The max8998 has a current regulator for charging control. The charger driver in drivers/power/supply/max8998_charger.c has a comment in it stating that 'charger control is done by a current regulator "CHARGER"', but this regulator was never added until now. The current values have been extracted from a downstream driver for the SGH-T959V. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB0660E1F4A3D5A348BE88311CA3BA0@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22misc: rtsx: Add short delay after exit from ASPMKlaus Doth
DMA transfers to and from the SD card stall for 10 seconds and run into timeout on RTS5260 card readers after ASPM was enabled. Adding a short msleep after disabling ASPM fixes the issue on several Dell Precision 7530/7540 systems I tested. This function is only called when waking up after the chip went into power-save after not transferring data for a few seconds. The added msleep does therefore not change anything in data transfer speed or induce any excessive waiting while data transfers are running, or the chip is sleeping. Only the transition from sleep to active is affected. Signed-off-by: Klaus Doth <kdlnx@doth.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-21ice: Rename build_ctob to ice_build_ctobTony Nguyen
To make the function easier to identify as being part of the ice driver, prepend ice to the function name. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21ice: remove unnecessary backslashBruce Allan
Self-explanatory. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21ice: remove unnecessary checkBruce Allan
The variable status cannot be zero due to a prior check of it; remove this check. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21ice: remove unnecessary expression that is always trueBruce Allan
The else conditional expression is always true due to the if conditional expression; remove it and add a comment to make it obvious still. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21ice: Fix check for removing/adding mac filtersLihong Yang
In function ice_set_mac_address, we will remove old dev_addr before adding the new MAC. In the removing and adding process of the MAC, there is no need to return error if the check finds the to-be-removed dev_addr does not exist in the MAC filter list or the to-be-added mac already exists, keep going or return success accordingly. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 03:11:46 +0000