| Age | Commit message (Collapse) | Author |
|---|
|
The kernel robot using sparse is complaining like this:
drivers/pinctrl/pinctrl-loongson2.c:212:21: sparse:
sparse: incorrect type in argument 1 (different address spaces) @@
expected void const volatile [noderef] __iomem *addr @@
got void *[noderef] __iomem reg @@
(...)
I think the problem is simply that the register base is defined
as void * __iomem instead of void __iomem * and this is because
of the way const correctness works with pointer infix order.
Fix it up. I think.
Reported-by: kernel test robot <lkp@intel.com>
Cc: zhanghongchen <zhanghongchen@loongson.cn>
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Fixes: f73f88acbc18 ("pinctrl: pinctrl-loongson2: add pinctrl driver support")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Extend lan966x XDP support with the action XDP_REDIRECT. This is similar
with the XDP_TX, so a lot of functionality can be reused.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend lan966x XDP support with the action XDP_TX. In this case when the
received buffer needs to execute XDP_TX, the buffer will be moved to the
TX buffers. So a new RX buffer will be allocated.
When the TX finish with the frame, it would give back the buffer to the
page pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To add support for XDP_TX it is required to be able to write to the DMA
area therefore it is required that the pages will be mapped using
DMA_BIDIRECTIONAL flag.
Therefore check if there are any xdp programs on the interfaces and in
that case set DMA_BIDRECTIONAL otherwise use DMA_FROM_DEVICE.
Therefore when a new XDP program is added it is required to redo the
page_pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default the rxq memory model is MEM_TYPE_PAGE_SHARED but to be able
to reuse pages on the TX side, when the XDP action XDP_TX it is required
to update the memory model to PAGE_POOL.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when a frame was transmitted, it is required to unamp the
frame that was transmitted. The length of the frame was taken from the
transmitted skb. In the future we might not have an skb, therefore store
the length skb directly in the lan966x_tx_dcb_buf and use this one to
unamp the frame.
While at this, also arrange the members in lan966x_tx_dcb_buf not to
have any holes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce lan966x_fdma_tx_setup_dcb and lan966x_fdma_tx_start functions
and use of them inside lan966x_fdma_xmit. There is no functional change
in here.
They are introduced to be used when XDP_TX/REDIRECT actions are
introduced.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the page_pool params to allocate XDP_PACKET_HEADROOM space as
headroom for all received frames.
This is needed for when the XDP_TX and XDP_REDIRECT are implemented.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PEROUT_ENABLE_OUTPUT_MASK was there to allow us to enable/disable
all the perout pins. But it is not standard procedure, we will
have to discard it.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
82P33 family of chips can trigger TOD read/write by external
signal from one of the IN12/13/14 pins, which are set user
space programs by calling PTP_PIN_SETFUNC through ptp_ioctl
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wei Chen reports a kernel bug as blew:
general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded
In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.
Fix this by checking msg[i].len in az6027_i2c_xfer().
Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.
It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.
BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
<TASK>
...
dvb_remove_device+0x18b/0x1f0 [dvb_core]
dvb_unregister_frontend+0x7b/0x130 [dvb_core]
vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
...
Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.
Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After commit 5e9c85d98337("[media] dib8096: enhancement"), no one use struct
dibx090p_adc, so remove it.
Link: https://lore.kernel.org/linux-media/20220927133827.99097-1-yuancan@huawei.com
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The dvb_usb_dib0700_ir_proto has been removed by
commit 0ffd1ab34a00 ("V4L/DVB: dib0700: properly implement IR
change_protocol"), so remove the orphan declaration.
Link: https://lore.kernel.org/linux-media/20220920015902.785337-1-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".
This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.
Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.
Syzbot report:
BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
[<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
[<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
[<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
[<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
[<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
[<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
[<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
[<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
[<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
[<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.
Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Delete the redundant word 'in'.
Link: https://lore.kernel.org/linux-media/20220724073242.15279-1-wangjianli@cdjrlc.com
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The function dvb_ringbuffer_pkt_next in
/linux-next/drviers/media/dvb-core/dvb_ringbuffer.c,
which searches the idx of the next valid packet in the ring
buffer of the ca->slot_info[slot].rx_buffer at
/linux-next/drivers/media/dvb-core/dvb_ca_en50221.c,
has the following problem.
In calculating the amounts of the consumed address of the ring
buffer, if the read address(rbuf->pread) of the ring buffer is
smaller than the idx, the amounts of the searched address
should be (idx - rbuf->pread),
whereas if the read address(rbuf->pread) of the ring buffer is
larger than the idx, the amounts of the consumed address should
be (idx - rbuf->pread + rbug->size). But there exists an
incorrect logic that the rbug-size was not properly added on
(idx - rbug->pread) in the later case. With this commit, we
fixed this bug.
Link: https://lore.kernel.org/linux-media/20220623103543.4138-1-yongsuyoo0215@gmail.com
Signed-off-by: Yongsu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
MANTIS_CORE needs DVB_CORE, set 'depends on' explicitly
ERROR: modpost: "dvb_dmx_init" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_unregister_adapter" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_register_frontend" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_ca_en50221_camchange_irq" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_unregister_frontend" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_ca_en50221_camready_irq" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_frontend_detach" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_dmxdev_release" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_dmx_swfilter" [drivers/media/pci/mantis/mantis_core.ko] undefined!
Link: https://lore.kernel.org/linux-media/20220516171515.16404-2-lecopzer.chen@mediatek.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed.
Link: https://lore.kernel.org/linux-media/20220426052921.2088416-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: fcd5ce4b3936 ("media: dvb-core: fix a memory leak bug")
Cc: stable@vger.kernel.org
Cc: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Variable ret is being ininitialized with a value that is never read.
The ininitializtion is redundant and can be removed. Move the variable
to the scope it is required.
Link: https://lore.kernel.org/linux-media/20220424154720.1356873-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Link: https://lore.kernel.org/linux-media/20220410061925.4107-1-chinayanlei2002@163.com
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Clean up unneeded 'else'.
Link: https://lore.kernel.org/linux-media/20220408092831.45755-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drivers for devices with multiple frontends which cannot be used
concurrently due to hardware limitations which enforce that restriction
by setting the mfe_shared field to 1 exhibit rather unfriendly behavior
towards applications: The unavailable frontend devices cannot be opened
at all, not even for read-only access to query information. Even worse,
any open call is blocked for 5 seconds by default.
Allow drivers for such devices to behave like regular busy frontend
devices instead, i.e. still allowing concurrent read access to the
unavailable frontend and denying concurrent write access with -EBUSY
without delay.
This patch does not alter the behavior of any existing driver to avoid
regressions. Driver developers who wish to take advantage of this must
ensure their driver can handle all read-only accesses to the unavailable
frontend, and indicate the capability by setting the mfe_shared field to
2 instead of 1.
Add a check to dvb-usb-init.c when automatically setting the mfe_shared
field that when a driver has already set the field to 2, it is not
overwritten.
Document the additional capability in the code comment about mfe_shared.
Link: https://lore.kernel.org/linux-media/trinity-22c77578-26b0-4867-9ff7-2668e5d22c64-1642799929896@3c-app-gmx-bap04
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Tested-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
While the documentation mentions the delivery system DSS as a satellite
system, it was missing from all but one switch statement in the DVB
frontend code, leading to tuning failures, because the frequency was not
correctly handled as being in kHz rather than Hz.
Add the missing switch cases so that DSS is handled like the other
satellite systems. For the rolloff, assume 0.20 as per one publication
found via Internet search.
Link: https://lore.kernel.org/linux-media/trinity-5f5afda9-657a-4a91-bf15-842f4f249535-1641958421391@3c-app-gmx-bap21
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fixes a8293 failure to raise LNB voltage in PCTV 461e DVB-S2 Stick
affecting multiple users over several years as found here:
http://www.linuxquestions.org/questions/linux-hardware-18/pctv-dvb-s2-stick-461e-not-feeding-lnb-4175529374/
https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(461e)
https://github.com/OpenELEC/OpenELEC.tv/issues/3731
Caused by vIN undervoltage lockout (status register bit 7) when raising LNB to 18V.
Addressed by using the higher-precision voltages available on the a8293 to gradually
increase (slew) the voltage when voltage increases are requested.
Adds volt_slew_nanos_per_mv to a8293_platform_data struct for specifying slew rate.
If value is <1 or non-sane (>1600), the original no-slew version for a8293_set_voltage is used.
Link: https://lore.kernel.org/linux-media/20211231035326.6759-1-cjritola@gmail.com
[mchehab: fixed some coding style issues]
Signed-off-by: Chuck Ritola <cjritola@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
of_node_put() needs to be called when jumping out of the loop, since
for_each_available_child_of_node() will increase the refcount of node.
Fixes: c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Link: https://lore.kernel.org/r/20221125070156.3535855-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This tests the filtering of keys, either dropping unsupported keys or
dropping keys specified in a list.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will display a list of keyset in case the type_id field in the VCAP
rule has been wildcarded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows support of TC protocol all for the Sparx5 IS2 VCAP.
This is done by creating multiple rules that covers the rule size and
traffic types in the IS2.
Each rule size (e.g X16 and X6) may have multiple keysets and if there are
more than one the type field in the VCAP rule will be wildcarded to support
these keysets.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for making a copy of a rule and modify keys and actions
to differentiate the copy.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the name_assign_type attribute was introduced (commit
685343fc3ba6, "net: add name_assign_type netdev attribute"), the
loopback device was explicitly mentioned as one which would make use
of NET_NAME_PREDICTABLE:
The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
that is guaranteed to avoid reuse and always be the same for a
given device. Examples include statically created devices like
the loopback device [...]
Switch to that so that reading /sys/class/net/lo/name_assign_type
produces something sensible instead of returning -EINVAL.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch addresses pfc_alloc_status array overflow occurring for
send queue index value greater than PFC priority. Queue index can be
greater than supported PFC priority for multiple scenarios (e.g. QoS,
during non zero SMQ allocation for a PF/VF).
In those scenarios the API should return default tx scheduler '0'.
This is causing mbox errors as otx2_get_smq_idx returing invalid smq value.
Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.
Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPV6 addresses are purged when setting the number of rx/tx
rings using ethtool -G. The function aq_set_ringparam
calls dev_close, which removes the addresses. As a solution,
call an internal function (aq_ndev_close).
Fixes: c1af5427954b ("net: aquantia: Ethtool based ring size configuration")
Signed-off-by: Izabela Bakollari <ibakolla@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it
to imx_get_clk_hw_by_name clarifies the purpose of the function, and
will allow it to be used not only for fixed rate clocks but also in
wider contexts.
No functional changes intended.
The replacements were made with the following command:
grep -rl 'imx_obtain_fixed_clk_hw' ./ | \
xargs sed -i 's/imx_obtain_fixed_clk_hw/imx_get_clk_hw_by_name/g'
Tested on a BSH SystemMaster (SMM) S2 board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221113180839.1625832-1-dario.binacchi@amarulasolutions.com
|
|
According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ENET_PHY_REF_CLK_ROOT 0xAA80 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV20
010 - SYSTEM_PLL2_DIV8
011 - SYSTEM_PLL2_DIV5
100 - SYSTEM_PLL2_DIV2
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - AUDIO_PLL2_CLK
... ... ...
while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-6-dario.binacchi@amarulasolutions.com
|
|
According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
SAI2_CLK_ROOT 0xA600 000 - 24M_REF_CLK
001 - AUDIO_PLL1_CLK
010 - AUDIO_PLL2_CLK
011 - VIDEO_PLL_CLK
100 - SYSTEM_PLL1_DIV6
110 - EXT_CLK_2
111 - EXT_CLK_3
... ... ...
while the imx8mn_sai2_sels list contained clk_ext3 and clk_ext4 for
source select bits 110b and 111b.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-5-dario.binacchi@amarulasolutions.com
|
|
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.
The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure
backward compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
|
|
There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.
Tested on the BSH SystemMaster (SMM) S2 board.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
|
|
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221124115946.5edb771c@endymion.delvare
|
|
Commit 9958d30f38b9 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
removes the config VIDEO_V4L2 as it is merged with config VIDEO_DEV.
Long after this change, commit 38fc5136ac16 ("media: i2c: Add ov08x40 image
sensor driver") introduces and refers to the removed config VIDEO_V4L2,
basically making this driver impossible to build, test and use due to
dependencies that cannot be met.
Refer to config VIDEO_DEV instead to make this driver usable.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: 38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In commit ed5c2f5fd10d ("i2c: Make remove callback return void") drivers
were updated to remove the return value of the remove callback, and
return void.
The OV08x40 was added after this commit but was not compile tested at
the time due to a KConfig issue, and this warning was missed.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix some 'vgxy61_write_reg' return vars not being signed int.
Fix 'expo_long_max' not being initialized.
Handle 'pm_runtime_get_sync' call that can return 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add MIPI CSI-2 receiver driver for Renesas RZ/G2L. The MIPI
CSI-2 is part of the CRU module found on RZ/G2L family.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Align some register and constant definitions using tab in place of
mixed tab+spaces.
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ar0521_write_mode() function explicitly programs the exposure time
register and the test pattern register, which are now setup by the call
to __v4l2_ctrl_handler_setup() in ar0521_set_stream().
Removing those register writes from ar0521_write_mode() reduces the
function to two operations: geometry configuration and pll
configuration.
Move geomerty configuration in the ar0521_set_stream() caller and rename
ar0521_write_mode() to ar0521_pll_config().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
