summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-05net: stmmac: Power up SERDES after the PHY linkRevanth Kumar Uppala
The Tegra MGBE ethernet controller requires that the SERDES link is powered-up after the PHY link is up, otherwise the link fails to become ready following a resume from suspend. Add a variable to indicate that the SERDES link must be powered-up after the PHY link. Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05xfrm: allow state packet offload modeLeon Romanovsky
Allow users to configure xfrm states with packet offload mode. The packet mode must be requested both for policy and state, and such requires us to do not implement fallback. We explicitly return an error if requested packet mode can't be configured. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05efi: Put Linux specific magic number in the DOS headerArd Biesheuvel
GRUB currently relies on the magic number in the image header of ARM and arm64 EFI kernel images to decide whether or not the image in question is a bootable kernel. However, the purpose of the magic number is to identify the image as one that implements the bare metal boot protocol, and so GRUB, which only does EFI boot, is limited unnecessarily to booting images that could potentially be booted in a non-EFI manner as well. This is problematic for the new zboot decompressor image format, as it can only boot in EFI mode, and must therefore not use the bare metal boot magic number in its header. For this reason, the strict magic number was dropped from GRUB, to permit essentially any kind of EFI executable to be booted via the 'linux' command, blurring the line between the linux loader and the chainloader. So let's use the same field in the DOS header that RISC-V and arm64 already use for their 'bare metal' magic numbers to store a 'generic Linux kernel' magic number, which can be used to identify bootable kernel images in PE format which don't necessarily implement a bare metal boot protocol in the same binary. Note that, in the context of EFI, the MS-DOS header is only described in terms of the fields that it shares with the hybrid PE/COFF image format, (i.e., the MS-DOS EXE magic number at offset #0 and the PE header offset at byte offset #0x3c). Since we aim for compatibility with EFI only, and not with MS-DOS or MS-Windows, we can use the remaining space in the MS-DOS header however we want. Let's set the generic magic number for x86 images as well: existing bootloaders already have their own methods to identify x86 Linux images that can be booted in a non-EFI manner, and having the magic number in place there will ease any future transitions in loader implementations to merge the x86 and non-x86 EFI boot paths. Note that 32-bit ARM already uses the same location in the header for a different purpose, but the ARM support is already widely implemented and the EFI zboot decompressor is not available on ARM anyway, so we just disregard it here. Acked-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-12-04hwmon: (dell-smm) Move error message to make probing silentArmin Wolf
If dell-smm-hwmon loads on unsupported hardware like the Dell XPS 17 9710, an error message is printed. This might confuse users, as drivers are expected to be silent if no supported hardware is found. Reorder the error message so its only printed when the driver is loaded with the "force" option being set. Also reword the error message slightly. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20221130183418.357246-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: use sysfs_emit() to instead of scnprintf()ye xingchen
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212011130317080061@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (oxp-sensors) Fix pwm readingJoaquín Ignacio Aramendía
PWM reading is only 1 register long. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221128185206.212022-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulsesAleksa Savic
Add support for reading and writing flow sensor pulses value on the Aquacomputer Quadro. Implemented by Leonard Anderweit [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/45 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20221126071313.34356-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (pmbus/core) Implement regulator get_statusPatrick Rudolph
Add get_status for pmbus_regulator_ops. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20221124193642.4081054-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (oxp-sensors) Add AOK ZOE and Mini PROJoaquín Ignacio Aramendía
Add support for the AOK ZOE A1 and OXP Mini PRO handheld devices. DMI strings are added to this driver since the same EC layout is used and has similar specs as the OXP mini AMD. The added devices are: - OneXPlayer mini PRO (AMD 6800U) - AOK ZOE A1 (AMD 6800U) Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221125114901.11309-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (gsc-hwmon) Switch to flexible array to simplify codeChristophe JAILLET
Using flexible array is more straight forward. It - saves 1 pointer in the 'gsc_hwmon_platform_data' structure - saves an indirection when using this array - saves some LoC and avoids some always spurious pointer arithmetic Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/61a23e1d642397cfcecc4ac3bb0ab485d257987d.1668936855.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (pmbus) Add power good supportPatrick Rudolph
Update error flags with regulation out if regulator is on & power good status bit is set Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20221117184022.1808508-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550MDenis Pauk
Boards such as * ProArt B550-CREATOR * ProArt Z490-CREATOR 10G * ROG CROSSHAIR VIII EXTREME * ROG CROSSHAIR VIII HERO (WI-FI) * TUF GAMING B550M-E * TUF GAMING B550M-E (WI-FI) * TUF GAMING B550M-PLUS WIFI II have got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds such boards to the WMI monitoring list. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Reported-by: yutesdb <mundanedefoliation@gmail.com> Tested-by: yutesdb <mundanedefoliation@gmail.com> Link: https://lore.kernel.org/r/20221114214456.3891-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) Add support for dynamic ttargetZhang Rui
Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at runtime when the Intel SST-PP (Intel Speed Select Technology - Performance Profile) level is changed. As a result, the ttarget value also becomes dyamic. Improve the code to always get updated ttarget value. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221113153145.32696-4-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) Add support for dynamic tjmaxZhang Rui
Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at runtime when the Intel SST-PP (Intel Speed Select Technology - Performance Profile) level is changed. Improve the code to always use updated tjmax when it can be retrieved from MSR_IA32_TEMPERATURE_TARGET. When tjmax can not be retrieved from MSR_IA32_TEMPERATURE_TARGET, still follow the previous logic and always use a static tjmax value. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221113153145.32696-3-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) rearrange tjmax handing codeZhang Rui
Rearrange the tjmax handling code so that it can be used directly in the sysfs attribute callbacks without forward declarations. No functional change in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221113153145.32696-2-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: Remove some useless #include <linux/hwmon-vid.h>Christophe JAILLET
<linux/hwmon-vid.h> is not needed for these drivers. Remove the corresponding #include. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/41610f64a69bd0245ebc811fcff10ee54e93ac46.1668330765.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) Remove obsolete temp_data->validZhang Rui
Checking for the valid bit of IA32_THERM_STATUS is removed in commit bf6ea084ebb5 ("hwmon: (coretemp) Do not return -EAGAIN for low temperatures"), and temp_data->valid is set and never cleared when the temperature has been read once. Remove the obsolete temp_data->valid field. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221108075051.5139-2-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: add OneXPlayer mini AMD sensors driverJoaquín Ignacio Aramendía
Sensors driver for OXP Handhelds from One-Netbook that expose fan reading and control via hwmon sysfs. As far as I could gather all OXP boards have the same DMI strings and they can be told appart only by the boot cpu vendor (Intel/AMD). Currently only AMD boards are supported since Intel have different EC registers and values to read/write. Fan control is provided via pwm interface in the range [0-255]. AMD boards have [0-100] as range in the EC, the written value is scaled to accommodate for that. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com [groeck: Removed misleading comment about module_platform_driver()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (aquacomputer_d5next) Clear up macros and commentsAleksa Savic
Reorganize macro definitions into sections for each supported device, with additional comments on their purpose. This should make it easier to follow what report each offset is coming from. Also, reformat per-device initializations in aqc_probe() to organize them into sections (fan info, temp sensors, other parameters and lastly labels). No functional changes. Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20221107142455.655998-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (it87) Add DMI table for future extensionsFrank Crawford
Add in DMI matching table to match various board quirks and settings. This will be useful for future extentions, but will start with the existing definition of the Shuttle SN68PT. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20221105232531.1619387-1-frank@crawford.emu.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: Include <linux/kstrtox.h> when appropriateChristophe JAILLET
The kstrto<something>() functions have been moved from kernel.h to kstrtox.h. So, include the latter directly in the appropriate files. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/51688cf50bda44e2731381a31287c62319388783.1667763218.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (jc42) Consistently use bit and bitfield macros in the driverMartin Blumenstingl
Use BIT() and GENMASK() macros for defining the bitfields inside the registers. Also use FIELD_GET() and FIELD_PREP() where appropriate. This makes the coding style within the driver consistent. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (pmbus/ltc2978) add support for LTC7132Felix Nieuwenhuizen
Add support for LTC7132. The relevant registers in the LTC7132 are identical to the LTC7880. So it's just a matter of adding the chip id. Signed-off-by: Felix Nieuwenhuizen <Felix.Nieuwenhuizen@etas.com> Link: https://lore.kernel.org/r/20221027145135.31802-1-Felix.Nieuwenhuizen@etas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (smpro-hwmon) Improve switch statments in smpro_is_visible()Nathan Chancellor
Clang warns: drivers/hwmon/smpro-hwmon.c:378:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] default: ^ drivers/hwmon/smpro-hwmon.c:378:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Additionally, adjust the indentation of a break and add a default case to the inner switch statement. Fixes: a87456864cbb ("hwmon: Add Ampere's Altra smpro-hwmon driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1751 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221027231611.3824800-1-nathan@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (jc42) Fix missing unlock on error in jc42_write()Yang Yingliang
Add the missing unlock before return from function jc42_write() in the error handling case. Fixes: 37dedaee8bc6 ("hwmon: (jc42) Convert register access and caching to regmap/regcache") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221027062931.598247-1-yangyingliang@huawei.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (jc42) Restore the min/max/critical temperatures on resumeMartin Blumenstingl
The JC42 compatible thermal sensor on Kingston KSM32ES8/16ME DIMMs (using Micron E-Die) is an ST Microelectronics STTS2004 (manufacturer 0x104a, device 0x2201). It does not keep the previously programmed minimum, maximum and critical temperatures after system suspend and resume (which is a shutdown / startup cycle for the JC42 temperature sensor). This results in an alarm on system resume because the hardware default for these values is 0°C (so any environment temperature greater than 0°C will trigger the alarm). Example before system suspend: jc42-i2c-0-1a Adapter: SMBus PIIX4 adapter port 0 at 0b00 temp1: +34.8°C (low = +0.0°C) (high = +85.0°C, hyst = +85.0°C) (crit = +95.0°C, hyst = +95.0°C) Example after system resume (without this change): jc42-i2c-0-1a Adapter: SMBus PIIX4 adapter port 0 at 0b00 temp1: +34.8°C (low = +0.0°C) ALARM (HIGH, CRIT) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C, hyst = +0.0°C) Apply the cached values from the JC42_REG_TEMP_UPPER, JC42_REG_TEMP_LOWER, JC42_REG_TEMP_CRITICAL and JC42_REG_SMBUS (where the SMBUS register is not related to this issue but a side-effect of using regcache_sync() during system resume with the previously cached/programmed values. This fixes the alarm due to the hardware defaults of 0°C because the previously applied limits (set by userspace) are re-applied on system resume. Fixes: 175c490c9e7f ("hwmon: (jc42) Add support for STTS2004 and AT30TSE004") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221023213157.11078-3-martin.blumenstingl@googlemail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (jc42) Convert register access and caching to regmap/regcacheMartin Blumenstingl
Switch the jc42 driver to use an I2C regmap to access the registers. Also move over to regmap's built-in caching instead of adding a custom caching implementation. This works for JC42_REG_TEMP_UPPER, JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never change except when explicitly written. The cache For JC42_REG_TEMP is dropped (regmap can't cache it because it's volatile, meaning it can change at any time) as well for simplicity and consistency with other drivers. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (aquacomputer_d5next) Add support for temperature sensor offsetsAleksa Savic
Add support for reading and writing temperature sensor offsets on the Aquacomputer D5 Next, Farbwerk 360, Octo and Quadro, for which the needed offsets are known. Implemented by Leonard Anderweit [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/22 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20221024151039.7222-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (occ) OCC sensors aren't arch-specificJeremy Kerr
Commit c112d75840fb ("hwmon: OCC drivers are ARM-only") made the OCC sensor drivers not selectable on powerpc64: These drivers are for a BMC inside PowerPC servers. The BMC runs on ARM hardware, so only propose the drivers on this architecture, unless build-testing. ... but we now have a powerpc64 BMC (still for a powerpc64 host), so drop the `depends on` that excludes building for this platform. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20221024081527.3842565-1-jk@codeconstruct.com.au Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: Add Ampere's Altra smpro-hwmon driverQuan Nguyen
This commit adds support for Ampere SMpro hwmon driver. This driver supports accessing various CPU sensors provided by the SMpro co-processor including temperature, power, voltages, and current. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20220929094321.770125-2-quan@os.amperecomputing.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (adm1177) simplify using devm_regulator_get_enable()Matti Vaittinen
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() and drop the pointer to the regulator. This simplifies code and makes it less tempting to add manual control for the regulator which is also controlled by devm. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/7773541795f280db31dd981ffc21df8a630b794a.1666357434.git.mazziesaccount@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (lm90) simplify using devm_regulator_get_enable()Matti Vaittinen
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable(). Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/a1fa4364cbb775de25478117dd22dda0742089e3.1666357434.git.mazziesaccount@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: use simple i2c probeStephen Kitt
All these drivers have an i2c probe function which doesn't use the "struct i2c_device_id *id" parameter, so they can trivially be converted to the "probe_new" style of probe with a single argument. This is part of an ongoing transition to single-argument i2c probe functions. Old-style probe functions involve a call to i2c_match_id: in drivers/i2c/i2c-core-base.c, /* * When there are no more users of probe(), * rename probe_new to probe. */ if (driver->probe_new) status = driver->probe_new(client); else if (driver->probe) status = driver->probe(client, i2c_match_id(driver->id_table, client)); else status = -EINVAL; Drivers which don't need the second parameter can be declared using probe_new instead, avoiding the call to i2c_match_id. Drivers which do can still be converted to probe_new-style, calling i2c_match_id themselves (as is done currently for of_match_id). This change was done using the following Coccinelle script, and fixed up for whitespace changes: @ rule1 @ identifier fn; identifier client, id; @@ - static int fn(struct i2c_client *client, const struct i2c_device_id *id) + static int fn(struct i2c_client *client) { ...when != id } @ rule2 depends on rule1 @ identifier rule1.fn; identifier driver; @@ struct i2c_driver driver = { - .probe + .probe_new = ( fn | - &fn + fn ) , }; Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20221011143309.3141267-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (it87) Check for a valid chip before using force_idAhmad Khalifa
Check there is a chip before using force_id parameter as there is no value in registering a non-existent chip Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20221004210100.540120-3-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (it87) Add param to ignore ACPI resource conflictsAhmad Khalifa
Add parameter to ignore ACPI resource conflicts as an alternate to using 'acpi_enforce_resources=lax'. Some BIOSes reserve resources and don't use them and the system wide parameter may result in failures to certain drivers. Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20221004210100.540120-2-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (fschmd) Make const arrays static constColin Ian King
Don't populate the read-only const arrays names and watchdog_minors on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221005152752.318493-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04nfp: correct desc type when header dma len is 4096Yinjun Zhang
When there's only one buffer to dma and its length is 4096, then only one data descriptor is needed to carry it according to current descriptor definition. So the descriptor type should be `simple` instead of `gather`, the latter requires more than one descriptor, otherwise it'll be dropped by application firmware. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Fixes: d9d950490a0a ("nfp: nfdk: implement xdp tx path for NFDK") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Richard Donkin <richard.donkin@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221202134646.311108-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-04char: tpm: Protect tpm_pm_suspend with locksJan Dabros
Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by: Jan Dabros <jsd@semihalf.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/ Cc: stable@vger.kernel.org Fixes: e891db1a18bf ("tpm: turn on TPM on suspend for TPM 1.x") [Jason: reworked commit message, added metadata] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-04Merge tag 'timers_urgent_for_v6.1_rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Revert a fix to RISC-V timers supposed to address an uncertainty whether clock events are received during S3 or not which locks up other RISC-V platforms. The issue will be fixed differently later. * tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"
2022-12-04Merge tag 'input-for-v6.1-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: - a fix for Raydium touchscreen driver to stop leaking memory when sending commands to the chip * tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
2022-12-04drm/shmem-helper: Avoid vm_open error pathsRob Clark
vm_open() is not allowed to fail. Fortunately we are guaranteed that the pages are already pinned, thanks to the initial mmap which is now being cloned into a forked process, and only need to increment the refcnt. So just increment it directly. Previously if a signal was delivered at the wrong time to the forking process, the mutex_lock_interruptible() could fail resulting in the pages_use_count not being incremented. Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221130185748.357410-3-robdclark@gmail.com
2022-12-04drm/shmem-helper: Remove errant put in error pathRob Clark
drm_gem_shmem_mmap() doesn't own this reference, resulting in the GEM object getting prematurely freed leading to a later use-after-free. Link: https://syzkaller.appspot.com/bug?extid=c8ae65286134dd1b800d Reported-by: syzbot+c8ae65286134dd1b800d@syzkaller.appspotmail.com Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221130185748.357410-2-robdclark@gmail.com
2022-12-04ASoC/tda998x: Fix reporting of nonexistent capture streamsMark Brown
Merge series from Mark Brown <broonie@kernel.org>: The recently added pcm-test selftest has pointed out that systems with the tda998x driver end up advertising that they support capture when in reality as far as I can see the tda998x devices are transmit only. The DAIs registered through hdmi-codec are bidirectional, meaning that for I2S systems when combined with a typical bidrectional CPU DAI the overall capability of the PCM is bidirectional. In most cases the I2S links will clock OK but no useful audio will be returned which isn't so bad but we should still not advertise the useless capability, and some systems may notice problems for example due to pinmux management. This is happening due to the hdmi-codec helpers not providing any mechanism for indicating unidirectional audio so add one and use it in the tda998x driver. It is likely other hdmi-codec users are also affected but I don't have those systems to hand. Mark Brown (2): ASoC: hdmi-codec: Allow playback and capture to be disabled drm: tda99x: Don't advertise non-existent capture support drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++ include/sound/hdmi-codec.h | 4 ++++ sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++----- 3 files changed, 31 insertions(+), 5 deletions(-) base-commit: f0c4d9fc9cc9462659728d168387191387e903cc -- 2.30.2
2022-12-04floppy: Fix memory leak in do_floppy_init()Yuan Can
A memory leak was reported when floppy_alloc_disk() failed in do_floppy_init(). unreferenced object 0xffff888115ed25a0 (size 8): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 8 bytes): 00 ac 67 5b 81 88 ff ff ..g[.... backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180 [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810fc30540 (size 32): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 If the floppy_alloc_disk() failed, disks of current drive will not be set, thus the lastest allocated set->tag cannot be freed in the error handling path. A simple call graph shown as below: floppy_module_init() floppy_init() do_floppy_init() for (drive = 0; drive < N_DRIVE; drive++) blk_mq_alloc_tag_set() blk_mq_alloc_tag_set_tags() blk_mq_realloc_tag_set_tags() # set->tag allocated floppy_alloc_disk() blk_mq_alloc_disk() # error occurred, disks failed to allocated ->out_put_disk: for (drive = 0; drive < N_DRIVE; drive++) if (!disks[drive][0]) # the last disks is not set and loop break break; blk_mq_free_tag_set() # the latest allocated set->tag leaked Fix this problem by free the set->tag of current drive before jump to error handling path. Cc: stable@vger.kernel.org Fixes: 302cfee15029 ("floppy: use a separate gendisk for each media format") Signed-off-by: Yuan Can <yuancan@huawei.com> [efremov: added stable list, changed title] Signed-off-by: Denis Efremov <efremov@linux.com>
2022-12-04random: align entropy_timer_state to cache lineJason A. Donenfeld
The theory behind the jitter dance is that multiple things are poking at the same cache line. This only works, however, if what's being poked at is actually all in the same cache line. Ensure this is the case by aligning the struct on the stack to the cache line size. We can't use ____cacheline_aligned on a stack variable, because gcc assumes 16 byte alignment when only 8 byte alignment is provided by the kernel, which means gcc could technically do something pathological like `(rsp & ~48) - 64`. It doesn't, but rather than risk it, just do the stack alignment manually with PTR_ALIGN and an oversized buffer. Fixes: 50ee7529ec45 ("random: try to actively add entropy rather than passively wait for it") Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-04random: mix in cycle counter when jitter timer firesJason A. Donenfeld
Rather than just relying on interaction between cache lines of the timer and the main loop, also explicitly take into account the fact that the timer might fire at some time that's hard to predict, due to scheduling, interrupts, or cross-CPU conditions. Mix in a cycle counter during the firing of the timer, in addition to the existing one during the scheduling of the timer. It can't hurt and can only help. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-04random: spread out jitter callback to different CPUsJason A. Donenfeld
Rather than merely hoping that the callback gets called on another CPU, arrange for that to actually happen, by round robining which CPU the timer fires on. This way, on multiprocessor machines, we exacerbate jitter by touching the same memory from multiple different cores. There's a little bit of tricky bookkeeping involved here, because using timer_setup_on_stack() + add_timer_on() + del_timer_sync() will result in a use after free. See this sample code: <https://xn--4db.cc/xBdEiIKO/c>. Instead, it's necessary to call [try_to_]del_timer_sync() before calling add_timer_on(), so that the final call to del_timer_sync() at the end of the function actually succeeds at making sure no handlers are running. Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-04pxa: Remove dev_err() after platform_get_irq()zhang songyi
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/202212021042043546303@zte.com.cn Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-03cxl/acpi: Support CXL XOR Interleave Math (CXIMS)Alison Schofield
When the CFMWS is using XOR math, parse the corresponding CXIMS structure and store the xormaps in the root decoder structure. Use the xormaps in a new lookup, cxl_hb_xor(), to find a targets entry in the host bridge interleave target list. Defined in CXL Specfication 3.0 Section: 9.17.1 Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/5794813acdf7b67cfba3609c6aaff46932fa38d0.1669847017.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-03Merge "ACPICA: Add CXL 3.0 structures..." into for-6.2/cxl-xorDan Williams
Pick up: f350c68e3cd5 ("ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table") ...to build the new XOR interleave math support for the CXL Fixed Memory Window Structures.
generated by cgit (git 2.34.1) at 2025-09-15 04:47:53 +0000