| Age | Commit message (Collapse) | Author |
|---|
|
This change fixes the checkpatch warning described in this
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The Intel I211 Ethernet Controller supports 2 Receive Side Scaling (RSS)
queues. It should not be excluded from having this feature enabled.
Via commit c883de9fd787 ("igb: rename igb define to be more generic")
E1000_MRQC_ENABLE_RSS_4Q was renamed to E1000_MRQC_ENABLE_RSS_MQ to
indicate that this is a generic bit flag to enable queues and not
a flag that is specific to devices that support 4 queues
The bit flag enables 2, 4 or 8 queues appropriately depending on the part.
Tested with a multicore CPU and frames were then distributed as expected.
This issue appears to have been introduced because of confusion caused
by the prior name.
Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
Tested-by: David Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixed a typo which caused the registers dump function to read the
RDBAL register when printing TDBAL register values.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Tested-by: David Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixed a typo which caused the registers dump function to read the
RDBAL register when printing TDBAL register values.
_reg_dump method has been partially derived from i210 and have
same typo.
Suggested-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Probe should return an error code if platform_get_irq_byname() fails
but it returns success instead.
Fixes: 6c30384eb1de ("net: mscc: ocelot: register devlink ports")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/YBkXyFIl4V9hgxYM@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are several error handling bugs in mscc_ocelot_init_ports(). I
went through the code, and carefully audited it and made fixes and
cleanups.
1) The ocelot_probe_port() function didn't have a mirror release function
so it was hard to follow. I created the ocelot_release_port()
function.
2) In the ocelot_probe_port() function, if the register_netdev() call
failed, then it lead to a double free_netdev(dev) bug. Fix this by
setting "ocelot->ports[port] = NULL" on the error path.
3) I was concerned that the "port" which comes from of_property_read_u32()
might be out of bounds so I added a check for that.
4) In the original code if ocelot_regmap_init() failed then the driver
tried to continue but I think that should be a fatal error.
5) If ocelot_probe_port() failed then the most recent devlink was leaked.
The fix for mostly came Vladimir Oltean. Get rid of "registered_ports"
and just set a bit in "devlink_ports_registered" to say when the
devlink port has been registered (and needs to be unregistered on
error). There are fewer than 32 ports so a u32 is large enough for
this purpose.
6) The error handling if the final ocelot_port_devlink_init() failed had
two problems. The "while (port-- >= 0)" loop should have been
"--port" pre-op instead of a post-op to avoid a buffer underflow.
The "if (!registered_ports[port])" condition was reversed leading to
resource leaks and double frees.
Fixes: 6c30384eb1de ("net: mscc: ocelot: register devlink ports")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/YBkXhqRxHtRGzSnJ@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split ndo_xdp_xmit and ndo_start_xmit use cases in veth_xdp_rcv routine
in order to alloc skbs in bulk for XDP_PASS verdict.
Introduce xdp_alloc_skb_bulk utility routine to alloc skb bulk list.
The proposed approach has been tested in the following scenario:
eth (ixgbe) --> XDP_REDIRECT --> veth0 --> (remote-ns) veth1 --> XDP_PASS
XDP_REDIRECT: xdp_redirect_map bpf sample
XDP_PASS: xdp_rxq_info bpf sample
traffic generator: pkt_gen sending udp traffic on a remote device
bpf-next master: ~3.64Mpps
bpf-next + skb bulking allocation: ~3.79Mpps
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/a14a30d3c06fff24e13f836c733d80efc0bd6eb5.1611957532.git.lorenzo@kernel.org
|
|
Adding support for Cinterion MV31 with PID 0x00B7.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00b7 Rev=04.14
S: Manufacturer=Cinterion
S: Product=Cinterion USB Mobile Broadband
S: SerialNumber=b3246eed
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FUNC_1 mask not in use in i225 device and could be removed
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Local receiver mask SR_1000T_LOCAL_RX_STATUS not in use in i225 device
and could be removed
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use the strscpy method instead of strlcpy method.
See: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr
_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Extend reporting of NVM image version to include the gPHY (i225 PHY)
firmware version.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Expose the NVM map version via drvinfo in ethtool
NVM image version is reported as firmware version for i225 device
Minor typo fix - remove space
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This counter counts the number of good (non-erred) packets
transmitted sent by the host.
A good transmit packet is considered one that is 64 or more bytes
in length (from <Destination Address> through <CRC>,
inclusively) in length
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Multiple Tx Data Read Requests is hardware pipeline feature and
is not controlled by software
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
i225 device not supported and do not plan to support
configuration of fw version string for ethtool
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
valid_led_default function pointer not in use and can
be removed from nvm_operations structure.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This converts the driver to use the new tasklet API introduced in
commit 12cc923f1ccc ("tasklet: Introduce new initialization API")
It is unfortunate that we need to add a pointer to the driver context to
get back to the usbnet device, but the space will be reclaimed once
there are no more users of the old API left and we can remove the data
value and flag from the tasklet struct.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20210130234637.26505-1-kernel@esmil.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since I wrote the below patch if you run a debug kernel you can a
dma debug warning like:
nouveau 0000:1f:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000016e012000] [size=4096 bytes]
The old nouveau code wasn't consolidate the pages like the ttm code,
but the dma-debug expects the sync code to give it the same base/range
pairs as the allocator.
Fix the nouveau sync code to consolidate pages before calling the
sync code.
Fixes: bd549d35b4be0 ("nouveau: use ttm populate mapping functions. (v2)")
Reported-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/417588/
|
|
Reporting a port as connected if nothing is attached to them leads to
any i2c transactions on this port trying to use an uninitialized i2c
adapter, fix this.
Let's account for this case even if branch devices have no good reason
to report a port as plugged with their peer device type set to 'none'.
Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2987
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1963
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.5+
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reported-by: Thiago Macieira <gitlab@gitlab.freedesktop.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-1-imre.deak@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing to a
new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for interconnect
configuration
- Boot fixes for 'LPASS' clock configuration on two machines"
* tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
arm64: dts: ls1046a: fix dcfg address range
soc: sunxi: mbus: Remove DE2 display engine compatibles
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: rockchip: Disable display for NanoPi R2S
ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
ARM: dts: stm32: Fix GPIO hog names on DHCOM
ARM: dts: stm32: Disable optional TSC2004 on DRC02 board
ARM: dts: stm32: Disable WP on DHCOM uSD slot
ARM: dts: stm32: Connect card-detect signal on DHCOM
ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect
arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some more fixes from the GPIO subsystem for this release. This time
it's only core fixes:
- fix a memory leak in error path in gpiolib
- clear debounce period in output mode in the character device code
- remove shadowed variable"
* tag 'gpio-fixes-for-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: gpiolib: remove shadowed variable
gpiolib: free device name on error path to fix kmemleak
gpiolib: cdev: clear debounce period if line set to output
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Two last minute small but important fixes.
The hp-wmi change fixes an issue which is actively being hit by users:
https://bugzilla.redhat.com/show_bug.cgi?id=1918255
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3564
And the dell-wmi-sysman patch fixes a bug in the new dell-wmi-sysman
driver which causes some systems to hang at boot when the driver
loads"
* tag 'platform-drivers-x86-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: dell-wmi-sysman: fix a NULL pointer dereference
platform/x86: hp-wmi: Disable tablet-mode reporting by default
|
|
When the host sends multiple h2cdata PDUs, we keep track on
the receive progress and calculate the scatterlist index and
offsets.
The issue is that sg_offset should only be kept for the first
iov entry we map in the iovec as this is the difference between
our cursor and the sg entry offset itself.
In addition, the sg index was calculated wrong because we should
not round up when dividing the command byte offset with PAG_SIZE.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Change "deivice" to "device"
Correct "Unsupported support hardware variant (%08x)" to
"Unsupported hardware variant (%08x)"
Signed-off-by: Jupeng Zhong <zhongjupeng@yulong.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
I tried to disable the autosuspend on btusb through the module
parameter enable_autosuspend, this parameter is set to N, but the usb
bluetooth device is still runtime suspended.
$ cat /sys/module/btusb/parameters/enable_autosuspend
N
$ cat /sys/bus/usb/devices/3-10/power/runtime_status
suspended
$ cat /sys/bus/usb/devices/3-10/power/runtime_suspended_time
65187
We already set ".supports_autosuspend = 1" in the usb_driver, this
device will be set autosuspend enabled by usb core, we don't need
to call usb_enable_autosuspend() in the btusb_probe(). Instead if
users set the parameter enable_autosuspend to N, we need to call
usb_disable_autosuspend() in the btusb_probe(). After this change
and set the parameter to N, we could see the device is not runtime
suspended anymore.
$ cat /sys/module/btusb/parameters/enable_autosuspend
N
$ cat /sys/bus/usb/devices/3-10/power/runtime_status
active
$ cat /sys/bus/usb/devices/3-10/power/runtime_suspended_time
0
And if we disable the autosuspend in the btusb_probe(), we need to
enable the autosuspend in the disconnect(), this could guarantee
that the device could be runtime suspended after we rmmod the btusb.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
"PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10" introduces several
changes regarding the ID Header VDO and the Product Type VDOs.
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210202161733.932215-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Remove unnecessary need_resched() before cond_resched()
* tag 'optee-fix-cond-resched-call-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: optee: remove need_resched() before cond_resched()
tee: optee: replace might_sleep with cond_resched
Link: https://lore.kernel.org/r/20210203120953.GB3624453@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
xhci driver may in some special cases need to copy small amounts
of payload data to a bounce buffer in order to meet the boundary
and alignment restrictions set by the xHCI specification.
In the majority of these cases the data is in a sg list, and
driver incorrectly assumed data is always in urb->sg when using
the bounce buffer.
If data instead is contiguous, and in urb->transfer_buffer, we may still
need to bounce buffer a small part if data starts very close (less than
packet size) to a 64k boundary.
Check if sg list is used before copying data to/from it.
Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
TEE subsystem housekeeping
- Fixes some comment typos in header files
- Updates to use flexible-array member instead of zero-length array
- Syncs internal OP-TEE headers with the ones from OP-TEE OS
* tag 'tee-housekeeping-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
Link: https://lore.kernel.org/r/20210203120742.GA3624453@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device state check before executing command. Without the check the
command can be issued while device is in halt state and causes the driver to
block while waiting for the completion of the command.
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Fixes: 0d5c10b4c84d ("dmaengine: idxd: add work queue drain support")
Link: https://lore.kernel.org/r/161219313921.2976211.12222625226450097465.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When running xrandr to change resolution of DP, the kmemleak as below
can be observed:
unreferenced object 0xffff00080a351000 (size 256):
comm "Xorg", pid 248, jiffies 4294899614 (age 19.960s)
hex dump (first 32 bytes):
98 a0 bc 01 08 00 ff ff 01 00 00 00 00 00 00 00 ................
ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e0bd0f69>] kmemleak_alloc+0x30/0x40
[<00000000cde2f318>] kmem_cache_alloc+0x3d4/0x588
[<0000000088ea9bd7>] drm_atomic_helper_setup_commit+0x84/0x5f8
[<000000002290a264>] drm_atomic_helper_commit+0x58/0x388
[<00000000f6ea78c3>] drm_atomic_commit+0x4c/0x60
[<00000000c8e0725e>] drm_atomic_connector_commit_dpms+0xe8/0x110
[<0000000020ade187>] drm_mode_obj_set_property_ioctl+0x1b0/0x450
[<00000000918206d6>] drm_connector_property_set_ioctl+0x3c/0x68
[<000000008d51e7a5>] drm_ioctl_kernel+0xc4/0x118
[<000000002a819b75>] drm_ioctl+0x214/0x448
[<000000008ca4e588>] __arm64_sys_ioctl+0xa8/0xf0
[<0000000034e15a35>] el0_svc_common.constprop.0+0x74/0x190
[<000000001b93d916>] do_el0_svc+0x24/0x90
[<00000000ce9230e0>] el0_svc+0x14/0x20
[<00000000e3607d82>] el0_sync_handler+0xb0/0xb8
[<000000003e79c15f>] el0_sync+0x174/0x180
This is because there is a scenario that a drm_crtc_commit commit is
allocated but not freed. The drm subsystem require/release references
to a CRTC commit by calling drm_crtc_commit_get/put, and when
drm_crtc_commit_put find that commit.ref.refcount is zero, it will
call __drm_crtc_commit_free to free this CRTC commit. Among these
drm_crtc_commit_get/put pairs, there is a drm_crtc_commit_get in
drm_atomic_helper_setup_commit as below:
...
new_crtc_state->event->base.completion = &commit->flip_done;
new_crtc_state->event->base.completion_release = release_crtc_commit;
drm_crtc_commit_get(commit);
...
This reference to the CRTC commit should be released at the function
release_crtc_commit by calling e->completion_release(e->completion) in
drm_send_event_locked. So we need to call drm_send_event_locked at
two places: handling vblank event in the irq handler and the crtc disable
helper. But in zynqmp_disp_crtc_atomic_disable, it only marks the flip
is done and not call drm_crtc_commit_put. This result that the refcount
of this commit is always non-zero and this commit will never be freed.
Since the function drm_crtc_send_vblank_event has operations both sending
a flip_done signal and releasing reference to the CRTC commit, let's use
it instead.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202064121.173362-1-quanyang.wang@windriver.com
|
|
Older ATF does not provide SMC call for USB 3.0 phy power on functionality
and therefore initialization of xhci-hcd is failing when older version of
ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP.
[ 3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
[ 3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95
[ 3.123465] xhci-hcd: probe of d0058000.usb failed with error -95
This patch introduces a new plat_setup callback for xhci platform drivers
which is called prior calling usb_add_hcd() function. This function at its
beginning skips PHY init if hcd->skip_phy_initialization is set.
Current init_quirk callback for xhci platform drivers is called from
xhci_plat_setup() function which is called after chip reset completes.
It happens in the middle of the usb_add_hcd() function and therefore this
callback cannot be used for setting if PHY init should be skipped or not.
For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup()
function configured as a xhci platform plat_setup callback. This new
function calls phy_power_on() and in case it returns -EOPNOTSUPP then
XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY
initialization.
This patch fixes above failure by ignoring 'not supported' error in
xhci-hcd driver. In this case it is expected that phy is already power on.
It fixes initialization of xhci-hcd on Espressobin boards where is older
Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power.
This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell:
armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined
and therefore xhci-hcd on Espressobin with older ATF started failing.
Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs")
Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
Cc: <stable@vger.kernel.org> # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # On R-Car
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # xhci-plat
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One fix for a phy-mode ethernet issue, and one to fix the display output on
SoCs with the Display Engine 2
* tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
soc: sunxi: mbus: Remove DE2 display engine compatibles
Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add suspend/resume support for clocksource timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120131559.1971359-5-arnd@kernel.org
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120131559.1971359-4-arnd@kernel.org
|
|
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120131559.1971359-3-arnd@kernel.org
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210120131559.1971359-2-arnd@kernel.org
|
|
Testing need_resched() before cond_resched() is not needed as an
equivalent test is done internally in cond_resched(). So drop the
need_resched() test.
Fixes: dcb3b06d9c34 ("tee: optee: replace might_sleep with cond_resched")
Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
If CONFIG_M5272=y:
drivers/net/ethernet/freescale/fec_main.c: In function ‘fec_restart’:
drivers/net/ethernet/freescale/fec_main.c:948:6: warning: unused variable ‘val’ [-Wunused-variable]
948 | u32 val;
| ^~~
drivers/net/ethernet/freescale/fec_main.c: In function ‘fec_get_mac’:
drivers/net/ethernet/freescale/fec_main.c:1667:28: warning: unused variable ‘pdata’ [-Wunused-variable]
1667 | struct fec_platform_data *pdata = dev_get_platdata(&fep->pdev->dev);
| ^~~~~
Fix this by moving the variable declarations inside the existing #ifdef
blocks.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210202130650.865023-1-geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-02-01
mlx5 netdev updates:
1) Trivial refactoring ahead of the upcoming uplink representor series.
2) Increased RSS table size to 256, for better results
3) Misc. Cleanup and very trivial improvements
* tag 'mlx5-updates-2021-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: DR, Avoid unnecessary csum recalculation on supporting devices
net/mlx5e: CT: remove useless conversion to PTR_ERR then ERR_PTR
net/mlx5e: accel, remove redundant space
net/mlx5e: kTLS, Improve TLS RX workqueue scope
net/mlx5e: remove h from printk format specifier
net/mlx5e: Increase indirection RQ table size to 256
net/mlx5e: Enable napi in channel's activation stage
net/mlx5e: Move representor neigh init into profile enable
net/mlx5e: Avoid false lock depenency warning on tc_ht
net/mlx5e: Move set vxlan nic info to profile init
net/mlx5e: Move netif_carrier_off() out of mlx5e_priv_init()
net/mlx5e: Refactor mlx5e_netdev_init/cleanup to mlx5e_priv_init/cleanup
net/mxl5e: Add change profile method
net/mlx5e: Separate between netdev objects and mlx5e profiles initialization
====================
Link: https://lore.kernel.org/r/20210202065457.613312-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the vendor driver, the new chip with XID 0x54b is
essentially the same as the one with XID 0x54a, but it doesn't need the
firmware.
So add support accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20210202044813.1304266-1-kai.heng.feng@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the next patch mlxsw and netdevsim will fail in compilation if
CONFIG_IPV6 is disabled.
Do not call fib6_info_hw_flags_set() when IPv6 is disabled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The next patch will emit notification when hardware flags are changed,
in case that fib_notify_on_flag_change sysctl is set to 1.
To know sysctl values, net struct is needed.
This change is consistent with the IPv4 version, which gets 'net' struct
as its first argument.
Currently, the only callers of this function are mlxsw and netdevsim.
Patch the callers to pass net.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, netdevsim implements dummy FIB offload and marks notified
routes with RTM_F_TRAP flag. netdevsim does not defer route notifications
to a work queue because it does not need to program any hardware.
Given that netdevsim's purpose is to both give an example implementation
and allow developers to test their code, align netdevsim to a "real"
hardware device driver like mlxsw and have it also perform the route
"programming" in a non-atomic context.
It will be used to test route flags notifications which will be added in
the next patches.
The following changes are needed when route handling is performed in WQ:
- Handle the accounting in the main context, to be able to return an
error for adding route when all the routes are used.
For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling
the delayed work, and in case that this event replaces an existing route,
decrease the counter as part of the delayed work.
- For IPv6, cannot use fen6_info->rt->fib6_siblings list because it
might be changed during handling the delayed work.
Save an array with the nexthops as part of fib6_event struct, and take
a reference for each nexthop to prevent them from being freed while
event is queued.
- Change GFP_ATOMIC allocations to GFP_KERNEL.
- Use single work item that is handling a list of ordered routes.
Handling routes must be processed in the order they were submitted to
avoid logical errors that could lead to unexpected failures.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When route is added/deleted, the appropriate counter is increased/decreased
to maintain number of routes.
User can limit the number of routes and then according to the appropriate
counter, adding more routes than the limitation is forbidden.
Currently, there is one lock which protects hashtable, list and accounting.
Handling the counters will be performed from both atomic context and
non-atomic context, while the hashtable and the list will be used only from
non-atomic context and therefore will be protected by a separate lock.
Protect accounting by using an atomic variable, so lock is not needed.
v2:
* Use atomic64_sub() in nsim_nexthop_account()'s error path
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Transactions to send data for a network device can be allocated at
any time up until the point the TX queue is stopped. It is possible
for ipa_start_xmit() to be called in one context just before a
the transmit queue is stopped in another.
Update gsi_channel_trans_last() so that for TX channels the
allocated and pending transaction lists are checked--in addition
to the completed and polled lists--to determine the "last"
transaction. This means any transaction that has been allocated
before the TX queue is stopped will be allowed to complete before
we conclude the channel is quiesced.
Rework the function a bit to use a list pointer and gotos.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No completion interrupts will occur while an endpoint is suspended,
nor when a channel has been stopped for suspend. So there's no need
to disable the interrupt during suspend and re-enable it when
resuming. Without any interrupts occurring, there is no need to
disable/re-enable NAPI for channel suspend/resume either.
We'll only enable NAPI and the interrupt when we first start the
channel, and disable it again only when it's "really" stopped.
To accomplish this, move the enable/disable calls out of
__gsi_channel_start() and __gsi_channel_stop(), and into
gsi_channel_start() and gsi_channel_stop() instead.
Add a call to napi_synchronize() to gsi_channel_suspend(), to ensure
NAPI polling is done before moving on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable both the I/O completion interrupt and NAPI polling on a
channel *after* we successfully stop it rather than before. This
ensures a completion occurring just before the channel is stopped
gets processed.
Enable NAPI polling and the interrupt *before* starting a channel
rather than after, to be symmetric. A stopped channel won't
generate any completion interrupts anyway.
Enable NAPI before the interrupt and disable it afterward.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
