summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-04-03drm/i915/adlp/tc: Use the DE HPD ISR register for hotplug detectionImre Deak
The spec says to use the CPU ISR registers for DP-alt/TBT HPD detection on ADLP, so do that instead of using the related IOM/TCSS registers. Bspec: 55480, 55482, 49212, 49305 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-23-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to init the PHYImre Deak
Add a hook for platform specific PHY initialization. Move the detection of modular FIAs to the TGL handler, skipping this on ADLP+ where the FIAs are always modular, not requiring a detection. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-22-imre.deak@intel.com
2023-04-03drm/i915/tc: Add asserts in TC PHY hooks that the required power is onImre Deak
Add an assert to each TC PHY hook that their required power domain is enabled. While at it add a comment describing the domains used on each platform and TC mode. v2: Fix non kernel-doc multiline comments. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-21-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to get the TC-cold blocking power domainImre Deak
Instead of the corresponding if ladder, add a TC PHY hook to get the platform and TC mode specific power domain used for blocking the TC-cold power state. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-20-imre.deak@intel.com
2023-04-03drm/i915/tc: Drop tc_cold_block()/unblock()'s power domain parameterImre Deak
Simplify tc_cold_block()/unblock() by dropping their power domain parameter. The power domain depends on the current TC mode, which - after the previous patch - can't change while the PHY is connected, holding a TC-cold-off power domain reference. Based on this the domain can be deducted from the current TC mode instead of having to pass this as a parameter. Blocking TC-cold for the PHY HW readout happens before the current TC mode is determined, so here the initial power domain must be still manually passed. For debugging still keep track of the domain used for tc_cold_block() and verify that it remained the same until tc_cold_unblock(). While at it rename tc_cold_get_power_domain() to tc_phy_cold_off_domain(), reflecting the name of platform specific hook added in the next patch. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-19-imre.deak@intel.com
2023-04-03drm/i915/tc: Remove redundant wakeref=0 check from unblock_tc_cold()Imre Deak
After the previous patch unblock_tc_cold() will not be called in a disconnected mode, so the wakeref passed to it will be always non-zero. Remove the redundant check. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-18-imre.deak@intel.com
2023-04-03drm/i915/tc: Block/unblock TC-cold in the PHY connect/disconnect hooksImre Deak
Move blocking/unblocking the TC-cold power state to the platform specific PHY connect / disconnect hooks. This allows for adjusting the connect/disconnect sequence as required for each platform. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-17-imre.deak@intel.com
2023-04-03drm/i915/tc: Check TC mode instead of the VBT legacy flagImre Deak
After the previous patch the TC mode in the connect/disconnect functions is always in sync with the VBT legacy port flag, so for consistency with the rest of the function check the TC mode instead of the VBT flag. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-16-imre.deak@intel.com
2023-04-03drm/i915/tc: Fix up the legacy VBT flag only in disconnected modeImre Deak
A follow-up patch simplifies the tc_cold_block()/unblock() functions, dropping the power domain parameter. For this it must be ensured that the power domain - which depends on the actual TC mode and so the VBT legacy port flag - can't change while the PHY is in a connected state and accordingly TC-cold is blocked. Make this so, by fixing up the VBT legacy flag only in the disconnected TC mode, instead of whenever the HPD state is retrieved. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-15-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hooks to connect/disconnect the PHYImre Deak
Add TC PHY hooks to connect/disconnect the PHY. A follow-up patch will add the ADLP specific hooks for these. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-14-imre.deak@intel.com
2023-04-03drm/i915/tc: Factor out tc_phy_verify_legacy_or_dp_alt_mode()Imre Deak
Factor out a function verifying the PHY connected state in legacy or DP-alt mode. This is common to all platforms, which can be reused in platform specific connect hooks added in follow-up patches. No functional changes. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-13-imre.deak@intel.com
2023-04-03drm/i915/tc: Add generic TC PHY connect/disconnect handlersImre Deak
Add generic handlers to connect/disconnect a PHY. Setting the TC mode to the target mode deducted from the HPD state and - if connecting to this mode fails - falling back to connecting to the default (TBT) mode are common to all platforms; move the logic for this from the ICL specific connect / disconnect handlers to the generic ones. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-12-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to read out the PHY HW stateImre Deak
Add a TC PHY hook to read out the PHY HW state on each platform, move the common parts to the generic helper. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-11-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hooks to get the PHY ready/owned stateImre Deak
Add TC PHY hooks to get the PHY ready/owned state on each platform, replacing the corresponding if ladder. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-10-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to get the PHY HPD live statusImre Deak
Add a table of TC PHY hooks which can be used to call platform specific TC PHY handlers, replacing the corresponding if ladders. Add the hook to retrieve the PHY's HPD live status. Move the common part fixing up the VBT legacy port flag to the generic helper. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-9-imre.deak@intel.com
2023-04-03drm/i915/tc: Move the intel_tc_port struct declaration to intel_tc.cImre Deak
Move the intel_tc_port struct to intel_tc.c for better isolation. This requires allocating the struct dynamically. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-8-imre.deak@intel.com
2023-04-03drm/i915/tc: Check for TC PHY explicitly in intel_tc_port_fia_max_lane_count()Imre Deak
Check explicitly if the port passed to intel_tc_port_fia_max_lane_count() has a TC PHY, instead of relying on the default TC mode value set for non-TC PHY ports. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-7-imre.deak@intel.com
2023-04-03drm/i915/tc: Move TC port fields to a new intel_tc_port structImre Deak
Move the TC port specific fields from intel_digital_port to a new intel_tc_port struct. Pass an intel_tc_port pointer to all static functions in intel_tc.c keeping dig_port accessible for these via a pointer stored in the new struct. The next patch will allocate the intel_tc_port dynamically, allowing moving the struct definition to intel_tc.c. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-6-imre.deak@intel.com
2023-04-03drm/i915/tc: Use the tc_phy prefix for all TC PHY functionsImre Deak
For consistency use the tc_phy prefix for all TC PHY functions. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-5-imre.deak@intel.com
2023-04-03drm/i915/tc: Rename tc_phy_status_complete() to tc_phy_is_ready()Imre Deak
For consistency rename tc_phy_status_complete() to tc_phy_is_ready() following the terminology of new platforms. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-4-imre.deak@intel.com
2023-04-03drm/i915/tc: Use the adlp prefix for ADLP TC PHY functionsImre Deak
Use the usual adlp prefix for all ADLP specific TC PHY functions. Other ADL platforms don't support TC. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-3-imre.deak@intel.com
2023-04-03drm/i915/tc: Group the TC PHY setup/query functions per platformImre Deak
Arrange the TC PHY HW state setup/query functions into platform specific and generic groups. This prepares for upcoming patches adding generic TC PHY handlers and platform specific hooks for these, replacing the corresponding if ladders. No functional changes. v2: Fix non kernel-doc multiline comments. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-2-imre.deak@intel.com
2023-04-03Merge tag 'amd-drm-next-6.4-2023-03-31' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.4-2023-03-31: amdgpu: - Misc code cleanups - S4 fixes - MES fixes - SR-IOV fixes - Link DC backlight to connector device rather than PCI device - W=1 fixes - ASPM quirk - RAS fixes - DC dynamic split fixes and enablement for remaining chips - Navi1x SMU fix - Initial NBIO 7.9 support - Initial GC 9.4.3 support - Initial GFXHUB 1.2 support - Initial MMHUB 1.8 support - DCN 3.1.5 fixes - Initial DC FAMs infrastructure - Add support for 6.75Gbps link rates - Add sysfs nodes for secondary VCN clocks amdkfd: - Initial support for GC 9.4.3 radeon: - Convert to client-based fbdev emulation Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331221955.7896-1-alexander.deucher@amd.com
2023-04-03drm/i915/dsc: Add debugfs entry to validate DSC output formatsSwati Sharma
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444). Also, new debugfs entry is created to enforce output format. This is required because of our driver policy. For ex. if a mode is supported in both RGB and YCbCr420 output formats by the sink, our policy is to try RGB first and fall back to YCbCr420, if mode cannot be shown using RGB. So, to test other output formats like YCbCr420 or YCbCr444, we need a debugfs entry (force_dsc_output_format) to force this output format. v2: -Func name changed to intel_output_format_name() (Jani N) -Return forced o/p format from intel_dp_output_format() (Jani N) v3: -output_format_str[] to remain static (Jani N) Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
2023-04-03drm/i915/vdsc: Check slice design requirementSuraj Kandpal
Add function to check if slice design requirements are being met as defined in Bspec: 49259 in the section Slice Design Requirement --v7 -remove full bspec link [Jani] -rename intel_dsc_check_slice_design_req to intel_dsc_slice_dimensions_valid [Jani] --v8 -fix condition to check if slice width and height are of two -fix minimum pixel in slice condition --v10 -condition should be < rather then >= [Uma] Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-7-suraj.kandpal@intel.com
2023-04-03drm/i915/dsc: Fill in native_420 fieldSuraj Kandpal
Now that we have laid the groundwork for YUV420 Enablement we fill up native_420 field in vdsc_cfg and add appropriate checks wherever required. ---v2 -adding native_422 field as 0 [Vandita] -filling in second_line_bpg_offset, second_line_offset_adj and nsl_bpg_offset in vds_cfg when native_420 is true ---v3 -adding display version check to solve igt issue --v7 -remove is_pipe_dsc check as its always true for D14 [Jani] --v10 -keep sink capability check [Jani] -move from !(x == y || w == z) to x !=y && w != z [Jani] --v11 -avoid native_420 computation if not gen14 [Uma] --v12 -fix state mismatch issue of compressed_bpp Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-6-suraj.kandpal@intel.com
2023-04-03drm/i915/dsc: Enable YCbCr420 for VDSCSuraj Kandpal
Implementation of VDSC for YCbCr420. Add QP tables for 8,10,12 BPC from rc_tables.h in intel_qp_tables.c (Derived from C-Model, which is given along with DSC1.2a Spec from Vesa) intel_lookup_range_min/max_qp functons need to take into account the output format. Based on that appropriate qp table need to be chosen. Other rc_parameters need to be set where currently values for 444 format is hardcoded in calculate_rc_parameters( ). vdsc_cfg struct needs to be filled with output format information, where these are hardcoded for 444 format. Bspec: 49259 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Vandita Kulkarni <Vandita.kulkarni@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-5-suraj.kandpal@intel.com
2023-04-03drm/i915/dsc: Adding the new registers for DSCSuraj Kandpal
Adding new DSC register which are introducted MTL onwards Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Vandita Kulkarni <Vandita.kulkarni@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-4-suraj.kandpal@intel.com
2023-04-03drm/i915/dp: Check if DSC supports the given output_formatAnkit Nautiyal
Go with DSC only if the given output_format is supported. v2: Use drm helper to get DSC format support for sink. v3: remove drm_dp_dsc_compute_bpp. Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-3-suraj.kandpal@intel.com
2023-04-03drm/mediatek: Add ovl_adaptor get format functionNancy.Lin
1. Add ovl_adaptor get_format and get_num_formats component function. The two functions are needed for getting the supported format in mtk_plane_init(). 2. Get supported format from the ovl_adaptor's rdma engine - mdp_rdma. Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230330032614.18837-3-nancy.lin@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-04-03drm/mediatek: Add mdp_rdma get format functionNancy.Lin
Add mdp_rdma get_format and get_num_formats function. Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230330032614.18837-2-nancy.lin@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-04-02drm/lima: add show_fdinfo for drm usage statsErico Nunes
This exposes an accumulated active time per client via the fdinfo infrastructure per execution engine, following Documentation/gpu/drm-usage-stats.rst. In lima, the exposed execution engines are gp and pp. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230312233052.21095-4-nunes.erico@gmail.com
2023-04-02drm/lima: allocate unique id per drm_fileErico Nunes
To track if fds are pointing to the same execution context and export the expected information to fdinfo, similar to what is done in other drivers. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230312233052.21095-3-nunes.erico@gmail.com
2023-04-02drm/lima: add usage counting method to ctx_mgrErico Nunes
lima maintains a context manager per drm_file, similar to amdgpu. In order to account for the complete usage per drm_file, all of the associated contexts need to be considered. Previously released contexts also need to be accounted for but their drm_sched_entity info is gone once they get released, so account for it in the ctx_mgr. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230312233052.21095-2-nunes.erico@gmail.com
2023-04-02drm/lima/lima_drv: Add missing unwind goto in lima_pdev_probe()Harshit Mogalapalli
Smatch reports: drivers/gpu/drm/lima/lima_drv.c:396 lima_pdev_probe() warn: missing unwind goto? Store return value in err and goto 'err_out0' which has lima_sched_slab_fini() before returning. Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314052711.4061652-1-harshit.m.mogalapalli@oracle.com
2023-03-31drm/msm/a6xx: Add support for A650 speed binningKonrad Dybcio
Add support for matching QFPROM fuse values to get the correct speed bin on A650 (SM8250) GPUs. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530043/ Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-2-2dede22dd7f7@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-03-31drm/msm/a6xx: Add support for A640 speed binningKonrad Dybcio
Add support for matching QFPROM fuse values to get the correct speed bin on A640 (SM8150) GPUs. Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530042/ Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-1-2dede22dd7f7@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-03-31drm/amd/pm: enable sysfs node vclk1 and dclk1 for NV3XTong Liu01
Enable node pp_dpm_vclk1 and pp_dpm_dclk1 for gc11.0.2 and gc11.0.3 Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/pm: enable sysfs node vclk1 and dclk1 for NV2XTong Liu01
Enable vclk1 and dclk1 node for gc10.3.0 and gc10.3.1 Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/pm: add sysfs node vclk1 and dclk1Tong Liu01
User can check pp_dpm_vclk1 and pp_dpm_dclk1 for DPM frequency of vcn and dcn Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Mark function 'optc3_wait_drr_doublebuffer_pending_clear' ↵Caio Novais
as static Compiling AMD GPU drivers displays a warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:294:6: warning: no previous prototype for ‘optc3_wait_drr_doublebuffer_pending_clear’ [-Wmissing-prototypes] Get rid of it by marking the function as static Signed-off-by: Caio Novais <caionovais@usp.br> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amdkfd: Set TG_CHUNK_SIZE for GC 9.4.3Amber Lin
On GC 9.4.3, DW 41 in MQD is repurposed as compute_tg_chunk_size for cooperative dispatch. When it's a AQL queue, set compute_tg_chunk_size as 1 to spread work groups evenly among XCCs. If it's PM4 queue, unset compute_tg_chunk_size to disable cooperative mode. v3: set compute_tg_chunk_size as 1 instead of #CUs per XCC v2: set compute_tg_chunk_size as #CUs per XCC instead of total wave slots per XCC Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Sean Keely <Sean.Keely@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amdkfd: Trap handler changes for GC 9.4.3 v2Jay Cornwall
v1: Check new exception bits in TRAPSTS register Remove single step exception workaround, now part of exception bits v2: GC 9.4.3 uses ttmp11 to store {1’b0, dispatch index [24:0], wave_id_in_workgroup[5:0]}, so use ttmp13 instead of ttmp11 to preserve ib_sts. (Laurent) Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Laurent Morichetti <Laurent.Morichetti@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Remove unused variable 'scl_enable'Caio Novais
Compiling AMD GPU drivers displays a warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c: In function ‘dml_rq_dlg_get_dlg_params’: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:991:14: warning: variable ‘scl_enable’ set but not used [-Wunused-but-set-variable] Get rid of it by removing the variable 'scl_enable'. Signed-off-by: Caio Novais <caionovais@usp.br> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amdkfd: Set noretry/xnack for GC 9.4.3Amber Lin
For GC 9.4.3, disable retry as default and XNACK can be different modes per process. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Whitespace cleanupUwe Kleine-König
Commit 075e2099c32c ("drm/amd/display: Fix race condition in DPIA AUX transfer") was backported to stable, which I noticed because of git saying linux-6.1/.git/rebase-apply/patch:37154: space before tab in indent. while applying patch-6.1.21. While fixing the code location that issued that warning, improve in few more places. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amdkfd: Add GC 9.4.3 KFD supportHawking Zhang
Add initial KFD support Convert a few structures to IP version checking (Hawking) Signed-off-by: Elena Sakhnovitch <elena.sakhnovitch@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Promote DAL to 3.2.229Aric Cyr
This DC version brings along: - Enable FPO optimization - Support for 6.75 GBps link rate - Fixes to underflow, black screen and more Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Uncomment assignments after HW headers are promotedAlvin Lee
[Description] Assign the correct info now that FW headers are promoted Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: [FW Promotion] Release 0.0.160.0Anthony Koo
- New parameter to define extra vblank stretch required when doing FPO + Vactive - Pass in pipe index for FPO Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 08:38:30 +0000