summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-03OMAP: DSS2: clear spurious SYNC_LOST_DIGIT interruptsVille Syrjälä
When DSS transitions from off mode to on VENC may generate a spurious SYNC_LOST_DIGIT error. Just ack it when restoring the context. Also restore IRQENABLE last to avoid triggering interrupts before the context is fully restored. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Make wait_for_go() succeed for disabled displaysVille Syrjälä
When the display is not active make the wait_for_go() functions return immediately. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Check if display supports update mode changesVille Syrjälä
Check whether the display actually has the set_update_mode() function before calling it. Only the sysfs codepath was broken, the omapfb ioctl had the necessary protection. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: Increase HS TX timeoutTomi Valkeinen
For some reason screen updates of certain odd widths seem to be triggering HS TX timeouts on OMAP 3430, even if bigger updates do not. The reason for this is unknown, but increasing the timeout removes the problem with no (so far) noticeable problems. I haven't seen this problem on OMAP 3630. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03pcmcia: do not request windows if you don't need toDominik Brodowski
Several drivers contained dummy code to request for memory windows, even though they never made use of it. Remove all such code snippets. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: insert PCMCIA device resources into resource treeDominik Brodowski
Insert PCMCIA device resources into the resource tree. However, this is currently only implemented for sockets which do not statically map the resources. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: export resource information to sysfsDominik Brodowski
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: use struct resource for PCMCIA devices, part 2Dominik Brodowski
Use struct resource * also for iomem resources. CC: linux-mtd@lists.infradead.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: remove memreq_tDominik Brodowski
Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: move local definitions out of include/pcmcia/cs.hDominik Brodowski
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: do not use io_req_t when calling pcmcia_request_io()Dominik Brodowski
Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: do not use io_req_t after call to pcmcia_request_io()Dominik Brodowski
After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: use struct resource for PCMCIA devicesDominik Brodowski
Introduce a new field into struct pcmcia_device named "resource" and of type struct resource *, which contains the IO port ranges allocated for this device. Memory window ranges and registration with the resource trees will follow at a later date. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: clean up cs.hDominik Brodowski
Remove some obsolete definitions from cs.h Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: use pcmica_{read,write}_config_byteDominik Brodowski
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead of pcmcia_access_configuration_register. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000e/hw.h net/bridge/br_device.c net/bridge/br_input.c
2010-08-02phy/marvell: add 88e1121 interface mode supportCyril Chemparathy
This patch adds support for RGMII RX/TX delay configuration on marvell 88e1121 and derivatives. With this patch, PHY_INTERFACE_MODE_RGMII_*ID modes are now supported on these devices. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02net: Fix a typo from "dev" to "ndev"Henrique Camargo
The typo was causing compilation errors since "dev" was not defined. Signed-off-by: Henrique Camargo <henrique.camargo@ensitec.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02igb: Use irq_synchronize per vector when using MSI-XEmil Tantilov
Synchronize all IRQs when using MSI-X. Similar to ixgbe. Issue was reported on e1000e, but the patch is also valid for igb. CC: Jean Delvare <jdelvare@suse.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02ixgbevf: fix null pointer dereference due to filter being set for VLAN 0Alexander Duyck
This change corrects an issue that resulted in a null pointer dereference for the addition of VLAN 0 without any VLANs being registered. Also this code removes some unnecessary checks for defines and the unnecessary setting of VLAN flags since that is now handled within the kernel via the vlan_features. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02e1000e: Fix irq_synchronize in MSI-X caseJeff Kirsher
Based on original patch/work from Jean Delvare <jdelvare@suse.de> Synchronize all IRQs when in MSI-X IRQ mode. Jean's original patch hard coded the sync with the 3 possible vectors, this patch incorporates more flexibility for the future and aligns with how igb stores the number of vectors into the adapter structure. CC: Jean Delvare <jdelvare@suse.de> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02e1000e: register pm_qos request on hardware activationFlorian Mickler
The pm_qos_add_request call has to register the pm_qos request with the pm_qos susbsystem before first use of the pm_qos request via pm_qos_update_request. As pm_qos changed to use plists there is no benefit in registering and unregistering the pm_qos request on ifup/ifdown and thus we move the registering into e1000_open and the unregistering in e1000_close. This fixes the following warning: [ 1.786060] WARNING: at kernel/pm_qos_params.c:264 pm_qos_update_request+0x28/0x54() [ 1.786088] Hardware name: Latitude E6500 [ 1.787045] pm_qos_update_request() called for unknown object [ 1.787966] Modules linked in: [ 1.788940] Pid: 1, comm: swapper Not tainted 2.6.35-rc5-mmotm0719 #1 [ 1.790035] Call Trace: [ 1.791121] [<ffffffff81037335>] warn_slowpath_common+0x80/0x98 [ 1.792205] [<ffffffff810373e1>] warn_slowpath_fmt+0x41/0x43 [ 1.793279] [<ffffffff81057c14>] pm_qos_update_request+0x28/0x54 [ 1.794347] [<ffffffff8134889e>] e1000_configure+0x421/0x459 [ 1.795393] [<ffffffff8134afbd>] e1000_open+0xbd/0x37c [ 1.796436] [<ffffffff8105743a>] ? raw_notifier_call_chain+0xf/0x11 [ 1.797491] [<ffffffff8145f948>] __dev_open+0xae/0xe2 [ 1.798547] [<ffffffff8145f997>] dev_open+0x1b/0x49 [ 1.799612] [<ffffffff8146e36e>] netpoll_setup+0x84/0x259 [ 1.800685] [<ffffffff81b5037c>] init_netconsole+0xbc/0x21f [ 1.801744] [<ffffffff81b5026c>] ? sir_wq_init+0x0/0x35 [ 1.802793] [<ffffffff81b502c0>] ? init_netconsole+0x0/0x21f [ 1.803845] [<ffffffff810002ff>] do_one_initcall+0x7a/0x12f [ 1.804885] [<ffffffff81b2ccae>] kernel_init+0x138/0x1c2 [ 1.805915] [<ffffffff81003554>] kernel_thread_helper+0x4/0x10 [ 1.806937] [<ffffffff81590e00>] ? restore_args+0x0/0x30 [ 1.807955] [<ffffffff81b2cb76>] ? kernel_init+0x0/0x1c2 [ 1.808958] [<ffffffff81003550>] ? kernel_thread_helper+0x0/0x10 [ 1.809958] ---[ end trace 84b562a00a60539e ]--- Signed-off-by: Florian Mickler <florian@mickler.org> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02RDMA/cxgb4: Set/reset the EP timer inside EP lockSteve Wise
Endpoint timer manipulation needs to be done inside the lock. Otherwise we can get into a situation where a timer is stopped before it is started, which hits the WARN_ON() in stop_ep_timer(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02RDMA/cxgb4: Use correct control txqSteve Wise
There is only one control txq per tx channel. So use the port number as the queue index when sending. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02RDMA/cxgb4: Fix race in fini pathSteve Wise
There exists a race condition where the app disconnects, which initiates an orderly close (via rdma_fini()), concurrently with an ingress abort condition, which initiates an abortive close operation. Since rdma_fini() must be called without IRQs disabled, the fini can be called after the QP has been transitioned to ERROR. This is ok, but we need to protect against qp->ep getting NULLed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02Merge branch 'next' into for-linusDmitry Torokhov
2010-08-02Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()Dmitry Torokhov
The kpad structure is assigned to i2c client via i2s_set_clientdata() at the end of adp5588_probe(), but in adp5588_gpio_add() we tried to access it (via dev_get_drvdata! which is not nice at all) causing an oops. Let's pass pointer to kpad directly into adp5588_gpio_add() and adp5588_gpio_remove() to avoid accessing driver data before it is set up. Also split out building of gpiomap into a separate function to clear the logic. Reported-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02Staging: ti-st: update TODOPavan Savoy
Removed TODO item 2 : Current UIM/KIM communicate via the rfkill device and identified by the unique idx assisgned by the rfkill sub-system to each of these rfkill entries. Removed TODO item 1 : Since there is no way we can test existance of multiple connectivity devices on platform. However the basic infrastructure as in providing a context to ST driver exist. If multiple devices have to exist on a given platform, multiple ST platform devices need to be registered and each of the protocol drivers have to mention which platform device they want to bind to/make use of. Removed TODO item 3: Locking have been reviewed and commit 36b5aee46b5e4788758409829926c631de0a64a3 documents locking. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: wlags49_h2: use common PCI_VENDOR/DEVICE_ID name formatJavier Martinez Canillas
There is a common name format for PCI_VENDOR/DEVICE_ID constants. wlags49_h2 names doesn't fit in the standard. This patch change the names and also fix some style issues. Thanks a lot, Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: comedi : fix brace coding style issue in wwrap.cDaniele Boncompagni
This is a patch to the wwrap.c file that fixes up a brace warnings and other errors found by the checkpatch.pl tool. Signed-off-by: Daniele Boncompagni <daniele.boncompagni@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: quatech_usb2: remove unused qt2_box_flush functionJavier Martinez Canillas
In today linux-next I got a compilation warning: drivers/staging/quatech_usb2/quatech_usb2.c:1852: warning: ‘qt2_box_flush’ defined but not used Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: slicoss: Remove net_device_stats from the driver's privateDenis Kirjanov
Remove net_device_stats from the driver's private. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: rtl8192su: check whether requests succeededKulikov Vasiliy
rtl8192_usb_probe() does not check alloc_ieee80211() and register_netdev() return values for errors. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: panel: fix error pathKulikov Vasiliy
panel_attach() poorly handles errors. On error unregister everything we have registered. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: otus: check kmalloc() return valueKulikov Vasiliy
kmalloc() may fail, if so return error from zfwUsbSubmitControl(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: octeon: check request_irq() return valueKulikov Vasiliy
request_irq() may fail, if so propagate error code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: wlan-ng: remove typedef in p80211hdr.hEdgardo Hames
This patch removes the only typedef in p80211hdr.h. Signed-off-by: Edgardo Hames <ehames@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: wlan-ng: fix checkpatch issues in headers.Edgardo Hames
This patch fix errors and warnings reported by checkpatch in p80211meta.h and p80211metstruct.h. Signed-off-by: Edgardo Hames <ehames@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: wlan-ng: remove typedef in p80211ioctl.hEdgardo Hames
This patches removes the only typedef in p80211ioctl.h Signed-off-by: Edgardo Hames <ehames@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: wlan-ng: fix style issues in p80211conv.hEdgardo Hames
This patch removes typedefs in p80211conv.h. Signed-off-by: Edgardo Hames <ehames@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: wlan-ng: fix style issues for p80211hdr.hEdgardo Hames
Removed typedef and other style issues. Signed-off-by: Edgardo Hames <ehames@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: vt6656: removed NTSTATUS definitionAndres More
Replaced NTSTATUS with int, as defined in a couple of places. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: vt6656: simplified tests involving both multi/broad-castsAndres More
By definition the broadcast address is also a multicast address. Lindented the modified section as required by checkpatch.pl. Signed-off-by: Andres More <more.andres@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: vt6655: replace BOOL with in kernel boolCharles Clément
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: vt6655: replace FALSE with in kernel falseCharles Clément
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: vt6655: replace TRUE with in kernel trueCharles Clément
Signed-off-by: Charles Clément <caratorn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: vt6656: Remove PUINT from ttype.hRoel Van Nyen
Remove PUINT from ttype.h Signed-off-by: Roel Van Nyen <roel.vannyen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: quickstart: depends on INPUTRandy Dunlap
quickstart uses input_*() functions so it should depend on INPUT. ERROR: "input_register_device" [drivers/staging/quickstart/quickstart.ko] undefined! ERROR: "input_allocate_device" [drivers/staging/quickstart/quickstart.ko] undefined! ERROR: "input_event" [drivers/staging/quickstart/quickstart.ko] undefined! ERROR: "input_free_device" [drivers/staging/quickstart/quickstart.ko] undefined! ERROR: "input_unregister_device" [drivers/staging/quickstart/quickstart.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Angelo Arrifano <miknix@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02Staging: dt3155: remove the driverGreg Kroah-Hartman
There is now a proper V4L driver for this device in the tree, so remove this one. Cc: Scott Smedley <ss@aao.gov.au> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02staging: ti dspbridge: avoid errors if stream id is zeroErnesto Ramos
As 'zero' can be a perfectly good id, it can be picked up as a NULL from userspace, avoid issues in API and user apps if stream handle is zero. Signed-off-by: Ernesto Ramos <ernesto@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-11 15:28:15 +0000