summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-29bnxt_en: implement devlink dev reload fw_activateEdwin Peer
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload driver_reinitEdwin Peer
The RTNL lock must be held between down and up to prevent interleaving state changes, especially since external state changes might release and allocate different driver resource subsets that would otherwise need to be tracked and carefully handled. If the down function fails, then devlink will not call the corresponding up function, thus the lock is released in the down error paths. v2: Don't use devlink_reload_disable() and devlink_reload_enable(). Instead, check that the netdev is not in unregistered state before proceeding with reload. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-Off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor cancellation of resource reservationsEdwin Peer
Resource reservations will also need to be reset after FUNC_DRV_UNRGTR in the following devlink driver_reinit patch. Extract this logic into a reusable function. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor printing of device infoEdwin Peer
The device info logged during probe will be reused by the devlink driver_reinit code in a following patch. Extract this logic into the new bnxt_print_device_info() function. The board index needs to be saved in the driver context so that the board information can be retrieved at a later time, outside of the probe function. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridgePali Rohár
This register is exported at address offset 0x30. Link: https://lore.kernel.org/r/20211028185659.20329-8-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridgePali Rohár
Aardvark supports PCIe Hot Reset via PCIE_CORE_CTRL1_REG. Use it for implementing PCI_BRIDGE_CTL_BUS_RESET bit of PCI_BRIDGE_CONTROL register on emulated bridge. With this, the function pci_reset_secondary_bus() starts working and can reset connected PCIe card. Custom userspace script [1] which uses setpci can trigger PCIe Hot Reset and reset the card manually. [1] https://alexforencich.com/wiki/en/pcie/hot-reset-linux Link: https://lore.kernel.org/r/20211028185659.20329-7-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Set PCI Bridge Class Code to PCI BridgePali Rohár
Aardvark controller has something like config space of a Root Port available at offset 0x0 of internal registers - these registers are used for implementation of the emulated bridge. The default value of Class Code of this bridge corresponds to a RAID Mass storage controller, though. (This is probably intended for when the controller is used as Endpoint.) Change the Class Code to correspond to a PCI Bridge. Add comment explaining this change. Link: https://lore.kernel.org/r/20211028185659.20329-6-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridgePali Rohár
From very vague, ambiguous and incomplete information from Marvell we deduced that the 32-bit Aardvark register at address 0x4 (PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode in the Functional Specification (only for Endpoint mode), controls two 16-bit PCIe registers: Command Register and Status Registers of PCIe Root Port. This means that bit 2 controls bus mastering and forwarding of memory and I/O requests in the upstream direction. According to PCI specifications bits [0:2] of Command Register, this should be by default disabled on reset. So explicitly disable these bits at early setup of the Aardvark driver. Remove code which unconditionally enables all 3 bits and let kernel code (via pci_set_master() function) to handle bus mastering of Root PCIe Bridge via emulated PCI_COMMAND on emulated bridge. Link: https://lore.kernel.org/r/20211028185659.20329-5-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # b2a56469d550 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access")
2021-10-29PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REGMarek Behún
The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower 8 bits. Fix reading content of this register and add a comment describing the access to this register. Link: https://lore.kernel.org/r/20211028185659.20329-4-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Fix return value of MSI domain .alloc() methodMarek Behún
MSI domain callback .alloc() (implemented by advk_msi_irq_domain_alloc() function) should return zero on success, since non-zero value indicates failure. When the driver was converted to generic MSI API in commit f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support"), it was converted so that it returns hwirq number. Fix this. Link: https://lore.kernel.org/r/20211028185659.20329-3-kabel@kernel.org Fixes: f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: pci-bridge-emul: Fix emulation of W1C bitsMarek Behún
The pci_bridge_emul_conf_write() function correctly clears W1C bits in cfgspace cache, but it does not inform the underlying implementation about the clear request: the .write_op() method is given the value with these bits cleared. This is wrong if the .write_op() needs to know which bits were requested to be cleared. Fix the value to be passed into the .write_op() method to have requested W1C bits set, so that it can clear them. Both pci-bridge-emul users (mvebu and aardvark) are compatible with this change. Link: https://lore.kernel.org/r/20211028185659.20329-2-kabel@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk>
2021-10-28hwmon: (nct7802) Add of_node_put() before returnWan Jiabing
Fix following coccicheck warning: ./drivers/hwmon/nct7802.c:1152:2-24: WARNING: Function for_each_child_of_node should have of_node_put() before return. Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211029024918.5161-1-wanjiabing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-28mlxsw: spectrum_qdisc: Offload root TBF as port shaperPetr Machata
The Spectrum ASIC allows configuration of maximum shaper on all levels of the scheduling hierarchy: TCs, subgroups, groups and also ports. Currently, TBF always configures a subgroup. But a user could reasonably express the intent to configure port shaper by putting TBF to a root position, around ETS / PRIO. Accept this usage and offload appropriately. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28Merge tag 'libnvdimm-fixes-5.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: - Fix a regression introduced in v5.15-rc6 that caused nvdimm namespace shutdown to hang due to reworks in the block layer q_usage_count. * tag 'libnvdimm-fixes-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: stop using q_usage_count as external pgmap refcount
2021-10-28Merge branch 'fixes' into nextUlf Hansson
2021-10-28mmc: tmio: reenable card irqs after the reset callbackWolfram Sang
The reset callback may clear the internal card detect interrupts, so make sure to reenable them if needed. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211028195149.8003-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-28Merge tag 'drm-fixes-2021-10-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Quiet but not too quiet, I blame Halloween. The first set of amdgpu fixes missed last week, hence why this has a few more of them, it's mostly display fixes for new GPUs and some debugfs OOB stuff. The i915 patches have one to remove a tracepoint possible issue before it's a real problem, the others around cflush and display are cc'ed to stable as well. Otherwise it's just a few misc fixes. Summary: MAINTAINERS: - Fix the path pattern ttm: - Fix fence leak in ttm_transfered_destroy. core: - Add GPD Win3 rotation quirk i915: - Remove unconditional clflushes - Fix oops on boot due to sync state on disabled DP encoders - Revert backend specific data added to tracepoints - Remove useless and incorrect memory frequence calculation panel: - Add quirk for Aya Neo 2021 seltest: - Reset property count for each drm damage selftest so full run will work correctly. amdgpu: - Fix two potential out of bounds writes in debugfs - Fix revision handling for Yellow Carp - Display fixes for Yellow Carp - Display fixes for DCN 3.1" * tag 'drm-fixes-2021-10-29' of git://anongit.freedesktop.org/drm/drm: (21 commits) MAINTAINERS: dri-devel is for all of drivers/gpu drm/i915: Revert 'guc_id' from i915_request tracepoint drm/amd/display: Fix deadlock when falling back to v2 from v3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31 drm/amdgpu: Fix even more out of bound writes from debugfs drm: panel-orientation-quirks: Add quirk for GPD Win3 drm/i915/dp: Skip the HW readout of DPCD on disabled encoders drm/i915: Catch yet another unconditioal clflush drm/i915: Convert unconditional clflush to drm_clflush_virt_range() drm/i915/selftests: Properly reset mock object propers for each test drm: panel-orientation-quirks: Add quirk for Aya Neo 2021 drm/ttm: fix memleak in ttm_transfered_destroy drm/amdgpu: support B0&B1 external revision id for yellow carp drm/amd/display: Moved dccg init to after bios golden init drm/amd/display: Increase watermark latencies for DCN3.1 drm/amd/display: increase Z9 latency to workaround underflow in Z9 drm/amd/display: Require immediate flip support for DCN3.1 planes drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1 drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1 drm/amdgpu: fix out of bounds write ...
2021-10-29Merge tag 'drm-intel-fixes-2021-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15 final: - Remove unconditional clflushes - Fix oops on boot due to sync state on disabled DP encoders - Revert backend specific data added to tracepoints - Remove useless and incorrect memory frequence calculation Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8735olh27y.fsf@intel.com
2021-10-28drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bitsAlex Deucher
The DMA mask on SI parts is 40 bits not 44. Copy paste typo. Fixes: 244511f386ccb9 ("drm/amdgpu: simplify and cleanup setting the dma mask") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762 Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: MST support for DPIAMeenakshikumar Somasundaram
[Why] - DPIA MST slot registers are not programmed during payload allocation and hence MST does not work with DPIA. - HPD RX interrupts are not handled for DPIA. [How] - Added inbox command to program the MST slots whenever payload allocation happens for DPIA links. - Added support for handling HPD RX interrupts Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu: Fix even more out of bound writes from debugfsPatrik Jakobsson
CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/discovery: add SDMA IP instance info for soc15 partsAlex Deucher
Add secondary instance version info for soc15 parts. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 partsAlex Deucher
Add secondary instance version info for vega20, arcturure, and aldebaran. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Enable dpia in dmub only for DCN31 B0Jude Shih
[Why] DMUB binary is common for both A0 and B0. Hence, driver should notify FW about the support for DPIA in B0. [How] Added dpia_supported bit in dmub_fw_boot_options and will be set only for B0. Assign dpia_supported to true before dm_dmub_hw_init in B0 case. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix USB4 hot plug crash issueJude Shih
[Why] Notify data from outbox corrupt, the notify type should be 2 (HPD) instead of 0 (No data). We copied the address instead of the value. The memory might be freed in the end of outbox IRQ [How] We should allocate the memory of notify and copy the whole content from outbox to hpd handle function Fixes: 88f52b1fff891e ("drm/amd/display: Support for SET_CONFIG processing with DMUB") Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix deadlock when falling back to v2 from v3Nicholas Kazlauskas
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e9d0e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fallback to clocks which meet requested voltage on DCN31Michael Strauss
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DCN301 code to DML folderQingqing Zhuo
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN301 to DML, where all FPU code should locate. Cc: Christian König <christian.koenig@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: fix link training regression for 1 or 2 laneWenjing Liu
[why] We have a regression that cause maximize lane settings to use uninitialized data from unused lanes. This will cause link training to fail for 1 or 2 lanes because the lane adjust is populated incorrectly sometimes. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: add two lane settings training optionsWenjing Liu
[why] option 1: disallow different lanes to have different lane settings option 2: dpcd lane settings will always use the same hw lane settings even if it doesn't match requested lane adjust Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: decouple hw_lane_settings from dpcd_lane_settingsWenjing Liu
[why] As DP features expands, we have encountered many situations where we must configure a different DPCD lane setting from hw lane settings we output. The change is to decouple hw lane settings from dpcd lane settings to provide flexibility to configure dpcd and hw individually. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: implement decide lane settingsWenjing Liu
[why] Decouple lane settings decision logic all to its own function. The function takes in lane adjust array and link training settings and decide what hw lane setting and dpcd lane setting should be used. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: adopt DP2.0 LT SCR revision 8Wenjing Liu
[how] revision 8 SCR requires DP Source to write TPS2 and FFE lane adjustment in one 5 byte write aux transaction. It specifies to read aux rd interval value as soon as we turn on TPS1 pattern. Cc: Wayne Lin <wayne.lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: FEC configuration for dpia links in MST modeMeenakshikumar Somasundaram
[Why] To fix the check condition for fec enable for dpia links in MST mode. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled in MST mode. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: FEC configuration for dpia linksMeenakshikumar Somasundaram
[Why] To fix the check condition for fec enable for dpia links. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add workaround flag for EDID read on certain docksJimmy Kizito
[Why] Certain docks appear to NAK I2C writes to the segment pointer with the MOT (middle of transaction) bit clear. This behaviour can cause EDID reads from higher segments to fail. [How] Add workaround flag for links which connect to docks exhibiting this issue. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set phy_mux_sel bit in dmub scratch registerHansen
[Why] B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or PHYC/PHY D. [How] Based on chip internal hardware revision id determine it is B0 and set DMUB scratch register so DMUBFW can connect the display pipe is connected correctly to the dig. Cc: Wayne Lin <wayne.lin@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Manually adjust strobe for DCN303Martin Leung
why: DCN303's 4 channel SOC BB causes problems at strobe how: workaround to manually adjust strobe calculation using FCLK restrict. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.159Aric Cyr
This new DC version brings improvements in the following areas: - Improvements for USB4; - Isolate FPU code for DCN20, DCN301, and DSC; - Fixes on Linking training; - Refactoring some parts of the code, such as PSR; Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.90Anthony Koo
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Remove unused macrosAnson Jacob
fixed16_to_double & fixed16_to_double_to_cpu are not used. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: allow windowed mpo + odmDmytro Laktyushkin
This change adds a config flag to allow non fullscreen MPO during ODM. Scaling calculation will still fail configurations where video is only one one side of the screen. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: set Layout properly for 8ch audio at timing validationGuo, Bing
Why: For audio packet type 0x02, there are 2 Layouts: Layout = 0 for 2 channels and Layout = 1 for > 2 channels. Layout will affect bandwidth check. Currently, for HDMI FRL, Layout field isn't set and has a default value of 0, so theoretically only 2-channel audio for audio packet type 0x02 is supported now. How: 1. Set Layout properly according to maximum audio channel numbers for audios with audio packet type 0x02. 2. 8ch LPCM audio is not supported for timing modes with v_active <= 576. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Fix 3DLUT skipped programmingAric Cyr
We found a compilation error that we thought was caused by the 3DLUT patch; later on, we figured out the root cause of the problem, but we already applied the revert in the wrong patch. This commit brings it back the 3DLUT fix. Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: 3.2.158Aric Cyr
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: [FW Promotion] Release 0.0.89Anthony Koo
- Add flag to control root clock gating in init_hw - Add flag to indicate a diags environment is being used Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Handle I2C-over-AUX write channel status updateAric Cyr
[Why] When writing long AUX commands some sinks will respond will write status update requiring source to read status. [How] When a write request is replied with data (AUX_ACK_M), retry a read of write status to determine when the write is completed. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Add comment for preferred_training_settingsGeorge Shen
[Why] Currently the naming of preferred_training_settings is ambiguous and has caused confusion regarding its purpose and usage. [How] Add comment to clarify the intention. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Implement fixed DP drive settingsGeorge Shen
[Why] Currently there are use cases that require DP link to maintain fixed VS and PE in HW regardless of what the sink requests. BIOS integrated info table will specify whether we need to use the fixed drive settings, and the drive settings to use. [How] Implement changes to parse the integrated info table and set the fixed drive settings accordingly. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: restyle dcn31 resource header inline with other asicsDmytro Laktyushkin
Style change for better consistency across codebase Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 02:19:57 +0000