summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-04fsl/fman: simplify redundant conditionMadalin Bucur
Change suggested by David Binderman, thanks. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: check of_get_phy_mode() return valueMadalin Bucur
For unknown compatibles avoid crashing and default to SGMII. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: check pcsphy pointer before useMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: MEMAC may use QSGMII PHY interface modeMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: return a phy_dev pointer from initMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: simplify device tree readsMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: use of_get_phy_mode()Madalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
2016-10-04fsl/fman: small fixesMadalin Bucur
Make module params static, proper NULL checks, remove __iomem label when misused. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
2016-10-04fsl/fman: fix loadable module compilationIgal Liberman
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
2016-10-04fsl/fman: split lines over 80 charactersMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04net: phy: Add Edge-rate driver for Microsemi PHYs.Raju Lakkaraju
Edge-rate: As system and networking speeds increase, a signal's output transition, also know as the edge rate or slew rate (V/ns), takes on greater importance because high-speed signals come with a price. That price is an assortment of interference problems like ringing on the line, signal overshoot and undershoot, extended signal settling times, crosstalk noise, transmission line reflections, false signal detection by the receiving device and electromagnetic interference (EMI) -- all of which can negate the potential gains designers are seeking when they try to increase system speeds through the use of higher performance logic devices. The fact is, faster signaling edge rates can cause a higher level of electrical noise or other type of interference that can actually lead to slower line speeds and lower maximum system frequencies. This parameter allow the board designers to change the driving strange, and thereby change the EMI behavioral. Edge-rate parameters (vddmac, edge-slowdown) get from Device Tree. Tested on Beaglebone Black with VSC 8531 PHY. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04vmxnet3: Wake queue from reset workBenjamin Poirier
vmxnet3_reset_work() expects tx queues to be stopped (via vmxnet3_quiesce_dev -> netif_tx_disable). However, this races with the netif_wake_queue() call in netif_tx_timeout() such that the driver's start_xmit routine may be called unexpectedly, triggering one of the BUG_ON in vmxnet3_map_pkt with a stack trace like this: RIP: 0010:[<ffffffffa00cf4bc>] vmxnet3_map_pkt+0x3ac/0x4c0 [vmxnet3] [<ffffffffa00cf7e0>] vmxnet3_tq_xmit+0x210/0x4e0 [vmxnet3] [<ffffffff813ab144>] dev_hard_start_xmit+0x2e4/0x4c0 [<ffffffff813c956e>] sch_direct_xmit+0x17e/0x1e0 [<ffffffff813c96a7>] __qdisc_run+0xd7/0x130 [<ffffffff813a6a7a>] net_tx_action+0x10a/0x200 [<ffffffff810691df>] __do_softirq+0x11f/0x260 [<ffffffff81472fdc>] call_softirq+0x1c/0x30 [<ffffffff81004695>] do_softirq+0x65/0xa0 [<ffffffff81069b89>] local_bh_enable_ip+0x99/0xa0 [<ffffffffa031ff36>] destroy_conntrack+0x96/0x110 [nf_conntrack] [<ffffffff813d65e2>] nf_conntrack_destroy+0x12/0x20 [<ffffffff8139c6d5>] skb_release_head_state+0xb5/0xf0 [<ffffffff8139d299>] skb_release_all+0x9/0x20 [<ffffffff8139cfe9>] __kfree_skb+0x9/0x90 [<ffffffffa00d0069>] vmxnet3_quiesce_dev+0x209/0x340 [vmxnet3] [<ffffffffa00d020a>] vmxnet3_reset_work+0x6a/0xa0 [vmxnet3] [<ffffffff8107d7cc>] process_one_work+0x16c/0x350 [<ffffffff810804fa>] worker_thread+0x17a/0x410 [<ffffffff810848c6>] kthread+0x96/0xa0 [<ffffffff81472ee4>] kernel_thread_helper+0x4/0x10 Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2016-10-02 This series contains updates to fm10k only. Jake fixes an issue where PTP applications requesting software timestamps may complain that the requested mode is not supported, so add a generic callback for those drivers that have software transmit timestamp support enabled. Then provides a trivial cleanup where a code was not wrapped properly. Got make sure that code looks good in a 80 character limit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03i40e: avoid NULL pointer dereference and recursive errors on early PCI errorGuilherme G Piccoli
Although rare, it's possible to hit PCI error early on device probe, meaning possibly some structs are not entirely initialized, and some might even be completely uninitialized, leading to NULL pointer dereference. The i40e driver currently presents a "bad" behavior if device hits such early PCI error: firstly, the struct i40e_pf might not be attached to pci_dev yet, leading to a NULL pointer dereference on access to pf->state. Even checking if the struct is NULL and avoiding the access in that case isn't enough, since the driver cannot recover from PCI error that early; in our experiments we saw multiple failures on kernel log, like: [549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15 [549.664] i40e: probe of 0007:01:00.1 failed with error -15 [...] [871.644] i40e 0007:01:00.1: The driver for the device stopped because the device firmware failed to init. Try updating your NVM image. [871.644] i40e: probe of 0007:01:00.1 failed with error -32 [...] [872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored Between the first probe failure (error -15) and the second (error -32) another PCI error happened due to the first bad probe. Also, driver started to flood console with those ARQ event messages. This patch will prevent these issues by allowing error recovery mechanism to remove the failed device from the system instead of trying to recover from early PCI errors during device probe. CC: <stable@vger.kernel.org> Signed-off-by: Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-10-03 This series contains fixes to i40e only. Stefan Assmann provides the changes in this series to resolve an issue where when we run out of MSIx vectors, iWARP gets disabled automatically. First adds a check for "no vectors left" during MSIx vector allocation for VMDq, which will prevent more vectors being allocated than available. Then fixed the MSIx vector redistribution when we reach the hardware limit for vectors so that additional features like VMDq, iWARP, etc do not get starved for vectors because the PF is hogging all the resources. Lastly, fix the issue for flow director by moving the check for the reaching the vector limit earlier in the code so that a decision can be made on disabling flow director. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qed: Add RoCE ll2 & GSI supportRam Amrani
Add the RoCE-specific LL2 logic [as well as GSI support] over the 'generic' LL2 interface. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qed: Add support for memory registeration verbsRam Amrani
Add slowpath configuration support for user, dma and memory regions registration. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qed: Add support for QP verbsRam Amrani
Add support for the slowpath configurations of Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qed: PD,PKEY and CQ verb supportRam Amrani
Add support for the configurations of the protection domain and completion queues. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qed: Add support for RoCE hw initRam Amrani
This adds the backbone required for the various HW initalizations which are necessary for the qedr driver - FW notification, resource initializations, etc. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qede: Add qedr frameworkRam Amrani
Adds a skeletal implementation of the qede RoCE driver - The qedr has some dependencies of the state of the underlying base interface. This adds some logic required with mutual registrations and the ability to pass updates on 'intresting' events. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03qed: Add Light L2 supportYuval Mintz
Other protocols beside the networking driver need the ability of passing some L2 traffic, usually [although not limited] for the purpose of some management traffic. Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03i40e: fix sideband flow director vector allocationStefan Assmann
Currently if the MSI-X vector limit is reached the sideband flow director gets disabled. A bit too early to make that decision, as vectors may get re-distributed. So move the check further back. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-03i40e: fix MSI-X vector redistribution if hw limit is reachedStefan Assmann
The driver allocates 1 vector per CPU thread and the current hardware limit for vectors is 129 per PF. On systems with 128 or more threads this currently means all vectors are used by the PF leaving no room for additional features like VMDq, iWARP, etc... The code that should redistribute the vectors in this case is broken and never triggers. Fixed the code so that it actually triggers if the hardware limit is reached and adjust the number of queue pairs accordingly. Also the number of initially requested iWARP vectors was not properly saved when the vector limit was reached, and therefore always zero. Comparison with debug statement. Before: i40e 0000:2d:00.0: VMDq disabled, not enough MSI-X vectors i40e 0000:2d:00.0: IWARP disabled, not enough MSI-X vectors i40e 00.0 MSI-X vector distribution: PF 128, VMDq 0, FDSB 0, iWARP 0 After: i40e 0000:2d:00.0: MSI-X vector limit reached, attempting to redistribute vectors i40e 00.0 MSI-X vector distribution: PF 78, VMDq 8, FDSB 0, iWARP 42 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-03i40e: check if vectors are already depleted when doing VMDq allocationStefan Assmann
During MSI-X vector allocation for VMDq, a check for "no vectors left" was missing, add it. This prevents more vectors to be allocated than available. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-03ptp: Fix resource leak in case of errorChristophe Jaillet
A call to 'ida_simple_remove()' is missing in the error handling path. This as been spotted with the following coccinelle script which tries to detect missing 'ida_simple_remove()' call in error handling paths. /////////////// @@ expression x; identifier l; @@ * x = ida_simple_get(...); ... if (...) { ... } ... if (...) { ... goto l; } ... * l: ... when != ida_simple_remove(...); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net: qcom/emac: fix return value check in emac_sgmii_config()Wei Yongjun
In case of error, the function ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Also add check for return value of platform_get_resource(). Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02fm10k: wrap long line for alloc_workqueueJacob Keller
Trivial change here to cleanup a checkpatch.pl warning that got introduced when changing to alloc_workqueue. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-03net: mvmdio: do not clk_disable_unprepare() NULL clockAlexey Khoroshilov
There is no need to clk_disable_unprepare(dev->clk) before it was initialized. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03mlxsw: spectrum_router: avoid potential uninitialized data usageArnd Bergmann
If fi->fib_nhs is zero, the router interface pointer is uninitialized, as shown by this warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_router_fib_event': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1674:21: error: 'r' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1643:23: note: 'r' was declared here This changes the loop so we handle the case the same way as finding no router interface pointer attached to one of the nexthops to ensure we always trap here instead of using uninitialized data. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net/mlx5e: shut up maybe-uninitialized warningArnd Bergmann
Build-testing this driver with -Wmaybe-uninitialized gives a new false-positive warning that I can't really explain: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'mlx5e_configure_flower': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:509:3: error: 'old_attr' may be used uninitialized in this function [-Werror=maybe-uninitialized] It's obvious from the code that 'old_attr' is initialized whenever 'old' is non-NULL here. The warning appears with all versions I tested from gcc-4.7 through gcc-6.1, and I could not come up with a way to rewrite the function in a more readable way that avoids the warning, so I'm adding another initialization to shut it up. Fixes: 8b32580df1cb ("net/mlx5e: Add TC vlan action for SRIOV offloads") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02fm10k: use generic ethtool_op_get_ts_info callbackJacob Keller
This generic callback is for drivers which have software Tx timestamp support enabled. Without this, PTP applications requesting software timestamps may complain that the requested mode is not supported. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-03cxgb4: unexport cxgb4_dcb_enabledArnd Bergmann
A recent cleanup marked cxgb4_dcb_enabled as 'static', which is correct, but this ignored how the symbol is also exported. In addition, the export can be compiled out when modules are disabled, causing a harmless compiler warning in configurations for which it is not used at all: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:282:12: error: 'cxgb4_dcb_enabled' defined but not used [-Werror=unused-function] This removes the export and moves the function into the correct #ifdef so we only build it when there are users. Fixes: 50935857f878 ("cxgb4: mark symbols static where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net: fec: set mac address unconditionallyGavin Schenk
If the mac address origin is not dt, you can only safely assign a mac address after "link up" of the device. If the link is off the clocks are disabled and because of issues assigning registers when clocks are off the new mac address cannot be written in .ndo_set_mac_address() on some soc's. This fix sets the mac address unconditionally in fec_restart(...) and ensures consistency between fec registers and the network layer. Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net: ethernet: mediatek: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/mediatek/mtk_eth_soc.c:2041:5: warning: no previous prototype for 'mtk_get_link_ksettings' [-Wmissing-prototypes] drivers/net/ethernet/mediatek/mtk_eth_soc.c:2052:5: warning: no previous prototype for 'mtk_set_link_ksettings' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03cxgb4: mark cxgb_setup_tc() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2715:5: warning: no previous prototype for 'cxgb_setup_tc' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three sets of overlapping changes. Nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix wrong TCP checksums on MTU probing when checksum offloading is disabled, from Douglas Caetano dos Santos. 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang. 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(), fix from Lance Richardson. 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6, fix from Nikolay Aleksandrov. 5) Fix packet alignment in fec driver, from Eric Nelson. 6) Fix perf regression in sctp due to struct layout and cache misses, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() act_ife: Fix false encoding act_ife: Fix external mac header on encode VSOCK: Don't dec ack backlog twice for rejected connections Revert "net: ethernet: bcmgenet: use phydev from struct net_device" net: fec: align IP header in hardware net: fec: remove QUIRK_HAS_RACC from i.mx27 net: fec: remove QUIRK_HAS_RACC from i.mx25 ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() tcp: fix a compile error in DBGUNDO() tcp: fix wrong checksum calculation on MTU probing sch_sfb: keep backlog updated with qlen sch_qfq: keep backlog updated with qlen can: dev: fix deadlock reported after bus-off
2016-10-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One final fix before 4.8. There was a memory leak triggered by turning scsi mq off due to the fact that we assume on host release that the already running hosts weren't mq based because that's the state of the global flag (even though they were). Fix it by tracking this on a per host host basis" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Avoid that toggling use_blk_mq triggers a memory leak
2016-09-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks
2016-09-30mlx5: Add ndo_poll_controller() implementationCalvin Owens
This implements ndo_poll_controller in net_device_ops callbacks for mlx5, which is necessary to use netconsole with this driver. Acked-By: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Calvin Owens <calvinowens@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30nfp: bpf: zero extend 4 byte context loadsJakub Kicinski
Set upper 32 bits of destination register to zeros after load from the context structure. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30mlx4: remove unused fieldsDavid Decotigny
This also can address following UBSAN warnings: [ 36.640343] ================================================================================ [ 36.648772] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx4/fw.c:857:26 [ 36.656853] shift exponent 64 is too large for 32-bit type 'int' [ 36.663348] ================================================================================ [ 36.671783] ================================================================================ [ 36.680213] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx4/fw.c:861:27 [ 36.688297] shift exponent 35 is too large for 32-bit type 'int' [ 36.694702] ================================================================================ Tested: reboot with UBSAN, no warning. Signed-off-by: David Decotigny <decot@googlers.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge tag 'wireless-drivers-next-for-davem-2016-09-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: wireless-drivers-next patches for 4.9 Major changes: iwlwifi * work for new hardware support continues * dynamic queue allocation stabilization * improvements in the MSIx code * multiqueue support work continues * new firmware version support (API 26) * add 8275 series support * add 9560 series support * add support for MU-MIMO sniffer * add support for RRM by scan * add support for "reverse" rx packet injection faking hw descriptors * migrate to devm memory allocation handling * Remove support for older firmwares (API older than -17 and -22) wl12xx * support booting the same rootfs with both wl12xx and wl18xx hostap * mark the driver as obsolete ath9k * disable RNG by default ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30tg3: Avoid NULL pointer dereference in tg3_io_error_detected()Milton Miller
While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add eeprom opsVivien Didelot
Remove EEPROM flags in favor of new {get,set}_eeprom chip-wide functions in the mv88e6xxx_ops structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add set_switch_mac to opsVivien Didelot
Add a set_switch_mac chip-wide function to mv88e6xxx_ops and remove MV88E6XXX_FLAG_G2_SWITCH_MAC flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add chip-wide opsVivien Didelot
Introduce a mv88e6xxx_ops structure to describe supported chip-wide functions and assign the correct variant to the chip models. For the moment, add only PHY access routines. This allows to get rid of the PHY ops structures and the usage of PHY flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: rename mv88e6xxx_opsVivien Didelot
The mv88e6xxx_ops is used to describe how to access the chip registers. It can be through SMI (via an MDIO bus), or via another interface such as crafted remote management frames. The correct BUS operations structure is chosen at runtime, depending on the chip address and connectivity. We will need the mv88e6xxx_ops name for future chip-wide operation structure, thus rename mv88e6xxx_ops to more explicit mv88e6xxx_bus_ops. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: rename mv88e6xxx_vtu_stu_entryVivien Didelot
The STU (if the switch has one) is abstracted and accessed through the VTU operations and data registers. Thus rename the mv88e6xxx_vtu_stu_entry struct to mv88e6xxx_vtu_entry. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 09:34:03 +0000