summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-01-12Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm fixes from Daniel Vetter: "Dave sends out his pull, everybody remembers holidays are over :-) Since Dave's already in weekend mode and it was quite a few patches I figured better to apply all the pulls and forward them to you. Hence here 2nd part of bugfixes for -rc2. nouveau: - backlight fix - falcon register access fix - fan fix. i915: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix core: - Fix fb-helper to work correctly with SDL 1.2 bugs - Fix lockdep warning in the atomic ioctl and setproperty" * tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/falcon: avoid touching registers if engine is off drm/nouveau: Don't disable polling in fallback mode drm/nouveau: register backlight on pascal and newer drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR drm/i915: init per-engine WAs for all engines drm/i915: Unwind failure on pinning the gen7 ppgtt drm/i915: Skip the ERR_PTR error state drm/i915: Disable PSR in Apple panels gpu/drm: Fix lock held when returning to user space. drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2 drm/i915/gvt: Fix workload request allocation before request add
2019-01-11scsi: cxgb4i: add wait_for_completion()Varun Prakash
In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: qla1280: set 64bit coherent maskThomas Bogendoerfer
After Commit 54aed4dd3526 ("MIPS: IP27: use dma_direct_ops") qla1280 driver failed on SGI IP27 machines with qla1280: QLA1040 found on PCI bus 0, dev 0 qla1280 0000:00:00.0: enabling device (0006 -> 0007) qla1280: Failed to get request memory qla1280: probe of 0000:00:00.0 failed with error -12 Reason is that SGI IP27 always generates 64bit DMA addresses and has no fallback mode for 32bit DMA addresses implemented. QLA1280 supports 64bit addressing for all DMA accesses so setting coherent mask to 64bit fixes the issue. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: ufs: Fix geometry descriptor sizeAvri Altman
Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0. [mkp: typo] Fixes: c720c091222e (scsi: ufs: sysfs: geometry descriptor) Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: megaraid_sas: Retry reads of outbound_intr_status regShivasharan S
commit 272652fcbf1a ("scsi: megaraid_sas: add retry logic in megasas_readl") missed changing readl to megasas_readl in megasas_clear_intr_fusion(). For Aero controllers, reads of outbound_intr_status register needs to be retried. Reported-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: qedi: Add ep_state for login completion on un-reachable targetsManish Rangankar
When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: ufs: Fix system suspend statusStanley Chu
hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume. According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned. Simply fix this flag to correct host status logs. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: qla2xxx: Use correct number of vectors for online CPUsMing Lei
When SCSI-MQ is enabled, in some case system would present nr_possible_cpus() which is greater than requested vectors by the driver. This results into driver being able to get larger number of MSI-X vectors than actual online CPUs. Driver then uses pci_alloc_irq_vectors_affinity() to assign 1:1 mapping and affinity for each MSI-x vector to CPUs. When the command is submitted using MSI-x vector, assigned to offline CPU, it results in an ABTS and system hang. This hang is result of a driver not being able to process interrupt on a vector assigned to an Off-line CPUs This patch fixes this issue by setting irq_offset value for the blk_mq_pci_map_queues() to use only those CPUs which has CPU mask affinity assigned and are online. By using the irq_offset value, driver will allow online cpumask to decide which vectors are used in blk_mq_pci_map_queues(). Fixes: 5601236b6f794 ("scsi: qla2xxx: Add Block Multi Queue functionality.") Cc: <stable@vger.kernel.org> #4.19 Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11mISDN: hfcsusb: Use struct_size() in kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11scsi: hisi_sas: Set protection parameters prior to adding SCSI hostJohn Garry
Currently we set the protection parameters after calling scsi_add_host() for v3 hw. They should be set beforehand, so make this change. Appearantly this fixes our DIX issue (not mainline yet) also, but more testing required. Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comesXiubo Li
Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11isdn: i4l: isdn_tty: Fix some concurrency double-free bugsJia-Ju Bai
The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed. isdn_tty_tiocmset isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); isdn_tty_set_termios isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); Thus, some concurrency double-free bugs may occur. These possible bugs are found by a static tool written by myself and my manual code review. To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios(). Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11vhost/vsock: fix vhost vsock cid hashing inconsistentZha Bin
The vsock core only supports 32bit CID, but the Virtio-vsock spec define CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as zero. This inconsistency causes one bug in vhost vsock driver. The scenarios is: 0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock object. And hash_min() is used to compute the hash key. hash_min() is defined as: (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)). That means the hash algorithm has dependency on the size of macro argument 'val'. 0. In function vhost_vsock_set_cid(), a 64bit CID is passed to hash_min() to compute the hash key when inserting a vsock object into the hash table. 0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min() to compute the hash key when looking up a vsock for an CID. Because the different size of the CID, hash_min() returns different hash key, thus fails to look up the vsock object for an CID. To fix this bug, we keep CID as u64 in the IOCTLs and virtio message headers, but explicitly convert u64 to u32 when deal with the hash table and vsock core. Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers") Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.tex Signed-off-by: Zha Bin <zhabin@linux.alibaba.com> Reviewed-by: Liu Jiang <gerry@linux.alibaba.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Prevent RX starvation in stmmac_napi_poll()Jose Abreu
Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget. This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low. Let's give always the same budget for RX and TX clean. While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Fix the logic of checking if RX Watchdog must be enabledJose Abreu
RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not. Fix this by checking earlier if user wants Watchdog disabled or not. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Check if CBS is supported before configuringJose Abreu
Check if CBS is currently supported before trying to configure it in HW. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: dwxgmac2: Only clear interrupts that are activeJose Abreu
In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Fix PCI module removal leakJose Abreu
Since commit b7d0f08e9129, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()Tony Luck
Possible race accessing memdev structures after dropping the mutex. Dan Williams says this could race against another thread that is doing: # echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind Reported-by: Jane Chu <jane.chu@oracle.com> Fixes: 23222f8f8dce ("acpi, nfit: Add function to look up nvdimm...") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-11ata: ahci: mvebu: request PHY suspend/resume for Armada 3700Miquel Raynal
A feature has been added in the libahci driver: the possibility to set a new flag in hpriv->flags to let the core handle PHY suspend/resume automatically. Make use of this feature to make suspend to RAM work with SATA drives on A3700. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAMMiquel Raynal
A3700 comphy initialization is done in the firmware (TF-A). Looking at the SATA PHY initialization routine, there is a comment about "vendor specific" registers. Two registers are mentioned. They are not initialized there in the firmware because they are AHCI related, while the firmware at this location does only PHY configuration. The solution to avoid doing such initialization is relying on U-Boot. While this work at boot time, U-Boot is definitely not going to run during a resume after suspending to RAM. Two possible solutions were considered: * Fixing the firmware. * Fixing the kernel driver. The first solution would take ages to propagate, while the second solution is easy to implement as the driver as been a little bit reworked to prepare for such platform configuration. Hence, this patch adds an Armada 3700 configuration function to set these two registers both at boot time (in the probe) and after a suspend (in the resume path). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCsMiquel Raynal
At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: remove stale commentMiquel Raynal
For Armada-38x (32-bit) SoCs, PM platform support has been added since: commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support") commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support") For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM platform support has always existed. There are even suspend/resume hooks in this driver since: commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Remove the stale comment at the end of this driver stating that all the above does not exist yet. Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: libahci_platform: comply to PHY frameworkMiquel Raynal
Current implementation of the libahci does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). PHYs should also be handled at suspend/resume time. For this, call ahci_platform_enable/disable_phys() at suspend/resume_host() time. These calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of the libahci driver must set manually in hpriv->flags at probe time. This is to avoid breaking users that have not been tested with this change. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has one core and one driver bugfix for you" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Fix Maximum transfer size i2c: dev: prevent adapter retries and timeout being set as minus value
2019-01-11Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another handful of arm64 fixes here. Most of the complication comes from improving our kpti code to avoid lengthy pauses (30+ seconds) during boot when we rewrite the page tables. There are also a couple of IORT fixes that came in via Lorenzo. Summary: - Don't error in kexec_file_load if kaslr-seed is missing in device-tree - Fix incorrect argument type passed to iort_match_node_callback() - Fix IORT build failure when CONFIG_IOMMU_API=n - Fix kpti performance regression with new rodata default option - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: return successfully even if kaslr-seed doesn't exist ACPI/IORT: Fix rc_dma_get_range() arm64: kpti: Avoid rewriting early page tables when KASLR is enabled arm64: asm-prototypes: Fix fat-fingered typo in comment ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
2019-01-11Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "A patch to allow setting abort_on_full and a fix for an old "rbd unmap" edge case, marked for stable" * tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client: rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set ceph: use vmf_error() in ceph_filemap_fault() libceph: allow setting abort_on_full for rbd
2019-01-11Merge tag 'acpi-5.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Fix a build failure introduced recently, fix the xpower PMIC ACPI driver, clean up the handling of duplicate entries in _PRx power resource lists and fix addresses in NUMA-related messages on 32-bit with PAE. Specifics: - Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that can occur since ACPI can be built without PCI now (Sinan Kaya). - Clean up the handling of duplicate entries in power resource lists returned by _PRx evaluation to avoid triggering WARN_ON() on attempts to add duplicate symlinks in sysfs (Hans de Goede). - Fix issues with the TS current-source switching on systems using the xpower PMIC by avoiding to update unrelated bits in the TS pin-ctrl register and avoiding to unconditionally enable TS current-source on systems where it is not used (Hans de Goede). - Fix addresses in NUMA-related messages on 32-bit with PAE which can be truncated due to integer type conversions (Chao Fan)" * tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PMIC: xpower: Fix TS-pin current-source handling ACPI: NUMA: Use correct type for printing addresses on i386-PAE ACPI: power: Skip duplicate power resource references in _PRx ACPI: Fix build failure when CONFIG_NLS is set to 'n'
2019-01-11Merge tag 'pm-5.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix fallout after starting to use hrtimers in the runtime PM framework, fix a few cpufreq issues, fix a recently broken reference to cpuidle documentation, update MAINTAINERS entries for cpufreq and cpuidle and make the recently added system suspend and resume support in devfreq actually work. Specifics: - Prevent integer overflows from occurring on 32-bit when converting milliseconds to nanoseconds in the runtime PM framework and update comments that still refer to jiffies in it (Vincent Guittot, Ladislav Michl). - Fix the SCMI cpufreq driver to always use the same frequency units for arch_set_freq_scale() and make the scale-invariant load tracking acutally work with this driver (Quentin Perret). - Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers broken during the 4.20 defelopment cycle (Viresh Kumar). - Prevent the cpufreq core from attempting to return the current frequency of offline CPUs (Sudeep Holla). - Add devfreq suspend and resume hooks (missed previously) to the PM core to make the recently added system suspend and resume support in devfreq actually work (Lukasz Luba). - Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add references to new/current documentation to them (Rafael Wysocki). - Fix a recently broken reference to cpuidle documentation (Otto Sabart)" * tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix autosuspend_delay on 32bits arch PM-runtime: Fix 'jiffies' in comments after switch to hrtimers cpufreq: scmi: Fix frequency invariance in slow path doc: trace: fix reference to cpuidle documentation file cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpuidle / Documentation: Update cpuidle MAINTAINERS entry cpufreq / Documentation: Update cpufreq MAINTAINERS entry PM: sleep: call devfreq suspend/resume
2019-01-11Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Not a huge amount for rc2, assume the usual quiet period, and rc3 will be most of it. amdgpu: - Powerplay fixes - Virtual display pinning fixes - Golden register updates for Vega - Pitch and gem size validation fixes - SR-IOV init error fix - Pagetables in system RAM disable for some Raven system - DP-MST resume fixes tc358767 bridge: - fix to work with displayport connector" * tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits) drm/amdgpu: disable system memory page tables for now drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 drm/bridge: tc358767: use DP connector if no panel set drm/bridge: tc358767: fix output H/V syncs drm/bridge: tc358767: reject modes which require too much BW drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value drm/bridge: tc358767: fix single lane configuration drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE drm/bridge: tc358767: add bus flags drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume() drm/amdgpu: Don't fail resume process if resuming atomic state fails drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume() drm/amdgpu: validate user GEM object size drm/amdgpu: validate user pitch alignment drm/amd/powerplay: drop the unnecessary uclk hard min setting drm/amd/powerplay: avoid possible buffer overflow drm/amd/powerplay: create pp_od_clk_voltage device file under OD support drm/amd/powerplay: update OD support flag for SKU with no OD capabilities drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG ...
2019-01-11tty: Don't hold ldisc lock in tty_reopen() if ldisc presentDmitry Safonov
Try to get reference for ldisc during tty_reopen(). If ldisc present, we don't need to do tty_ldisc_reinit() and lock the write side for line discipline semaphore. Effectively, it optimizes fast-path for tty_reopen(), but more importantly it won't interrupt ongoing IO on the tty as no ldisc change is needed. Fixes user-visible issue when tty_reopen() interrupted login process for user with a long password, observed and reported by Lukas. Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Lukas F. Hartmann <lukas@mntmn.com> Tested-by: Lukas F. Hartmann <lukas@mntmn.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-11mmc: core: don't override the CD GPIO level when "cd-inverted" is setMartin Blumenstingl
Since commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") gpiolib-of parses the "cd-gpios" property and flips the polarity if "cd-inverted" is also set. This results in the "cd-inverted" property being evaluated twice, which effectively makes it a no-op: - first in drivers/gpio/gpiolib-of.c (of_xlate_and_get_gpiod_flags) when setting up the CD GPIO - then again in drivers/mmc/core/slot-gpio.c (mmc_gpio_get_cd) when reading the CD GPIO value at runtime On boards which are using device-tree with the "cd-inverted" property being set any inserted card are not detected anymore. This is due to the MMC core treating the CD GPIO with the wrong polarity. Disable "override_cd_active_level" for the card detection GPIO which is parsed using mmc_of_parse. This fixes SD card detection on the boards which are currently using the "cd-inverted" device-tree property (tested on Meson8b Odroid-C1 and Meson8b EC-100). This does not remove the CD GPIO inversion logic from the MMC core because there's at least one driver (sdhci-pci-core for Intel BayTrail based boards) which still passes "override_cd_active_level = true" to mmc_gpiod_request_cd(). Due to lack of hardware for testing this is left untouched. In the future the GPIO inversion logic for both, card and read-only detection can be removed once no driver is using it anymore. Fixes: 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Loys Ollivier <loys.ollivier@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-11fbdev: offb: Fix OF node name handlingRob Herring
Commit 5c63e407aaab ("fbdev: Convert to using %pOFn instead of device_node.name") changed how the OF FB driver handles the OF node name. This missed the case where the node name is passed to offb_init_palette_hacks(). This results in a NULL ptr dereference in strncmp and breaks any system except ones using bootx with no display node. Fix this by making offb_init_palette_hacks() use the OF node pointer and use of_node_name_prefix() helper function instead for node name comparisons. This helps in moving all OF node name accesses to helper functions in preparation to remove struct device_node.name pointer. Fixes: 5c63e407aaab ("fbdev: Convert to using %pOFn instead of device_node.name") Reported-by: Mathieu Malaterre <malat@debian.org> Tested-by: Mathieu Malaterre <malat@debian.org> Cc: stable@vger.kernel.org # v4.19+ Cc: Elimar Riesebieter <riesebie@lxtec.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-01-11omap2fb: Fix stack memory disclosureVlad Tsyrklevich
Using [1] for static analysis I found that the OMAPFB_QUERY_PLANE, OMAPFB_GET_COLOR_KEY, OMAPFB_GET_DISPLAY_INFO, and OMAPFB_GET_VRAM_INFO cases could all leak uninitialized stack memory--either due to uninitialized padding or 'reserved' fields. Fix them by clearing the shared union used to store copied out data. [1] https://github.com/vlad902/kernel-uninitialized-memory-checker Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Reviewed-by: Kees Cook <keescook@chromium.org> Fixes: b39a982ddecf ("OMAP: DSS2: omapfb driver") Cc: security@kernel.org [b.zolnierkie: prefix patch subject with "omap2fb: "] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-01-11ACPI/IORT: Fix rc_dma_get_range()Jean-Philippe Brucker
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback() expects the opaque pointer argument to be a PCI bus device. At the moment rc_dma_get_range() passes the PCI endpoint instead of the bus, and we've been lucky to have pci_domain_nr(ptr) return 0 instead of crashing. Pass the bus device to iort_scan_node(). Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Cc: stable@vger.kernel.org Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-11Revert "staging: rtl8723bs: Mark ACPI table declaration as used"Greg Kroah-Hartman
This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c. Turns out it is not needed at all, a fix for clang was made and accepted upstream in that project that makes this change unnecessary. So revert it. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-11Merge tag 'drm-intel-fixes-2019-01-11' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes i915 fixes for v5.0-rc2: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87pnt35z8h.fsf@intel.com
2019-01-11Merge tag 'drm-misc-fixes-2019-01-10-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Second pull request, drm-misc-fixes for v5.0-rc2: - Fix fb-helper to work correctly with SDL 1.2 bugs. - Fix lockdep warning in the atomic ioctl and setproperty. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2cf24f5c-2b1f-befa-8d08-058661146b61@linux.intel.com
2019-01-11Merge branches 'acpi-pci', 'acpi-power' and 'acpi-misc'Rafael J. Wysocki
* acpi-pci: ACPI: Fix build failure when CONFIG_NLS is set to 'n' * acpi-power: ACPI: power: Skip duplicate power resource references in _PRx * acpi-misc: ACPI: NUMA: Use correct type for printing addresses on i386-PAE
2019-01-11Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpuidle: doc: trace: fix reference to cpuidle documentation file cpuidle / Documentation: Update cpuidle MAINTAINERS entry * pm-cpufreq: cpufreq: scmi: Fix frequency invariance in slow path cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpufreq / Documentation: Update cpufreq MAINTAINERS entry * pm-sleep: PM: sleep: call devfreq suspend/resume
2019-01-11gpio: pca953x: Make symbol 'pca953x_i2c_regmap' staticWei Yongjun
Fixes the following sparse warning: drivers/gpio/gpio-pca953x.c:292:28: warning: symbol 'pca953x_i2c_regmap' was not declared. Should it be static? Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-11Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
3 nouveau fixes: one backlight, falcon register access, and a fan fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4MHr=Rq3FkZFTYWPc7o5-dTWFysXB=wN2L91SYeFbzkQ@mail.gmail.com
2019-01-11drm/nouveau/falcon: avoid touching registers if engine is offIlia Mirkin
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-01-11drm/nouveau: Don't disable polling in fallback modeTakashi Iwai
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume <thomas.blume@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-01-11drm/nouveau: register backlight on pascal and newerBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-01-10RDMA/mthca: Clear QP objects during their allocationLeon Romanovsky
As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp(). CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64 Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib] RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core] RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699 RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20 RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400 R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000 FS: 0000000000000000(0000) GS:ffff8d1bf7ac0000(0000) knlGS:0000000000000000 Trace: ib_destroy_qp+0xc9/0x240 [ib_core] ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib] process_one_work+0x1a1/0x3a0 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Reported-by: Alexander Murashkin <AlexanderMurashkin@msn.com> Tested-by: Alexander Murashkin <AlexanderMurashkin@msn.com> Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-10RDMA/vmw_pvrdma: Return the correct opcode when creating WRAdit Ranadive
Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device opcodes explicitly. Reported-by: Ruishuang Wang <ruishuangw@vmware.com> Fixes: 9a59739bd01f ("IB/rxe: Revise the ib_wr_opcode enum") Cc: stable@vger.kernel.org Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-11i2c: tegra: Fix Maximum transfer sizeSowjanya Komatineni
Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-11i2c: dev: prevent adapter retries and timeout being set as minus valueYi Zeng
If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by: Yi Zeng <yizeng@asrmicro.com> [wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2019-01-10Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fixes from Christoph. * 'nvme-5.0' of git://git.infradead.org/nvme: nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps
generated by cgit (git 2.34.1) at 2025-09-12 00:51:35 +0000