| Age | Commit message (Collapse) | Author |
|---|
|
Now that all users of device_node.type pointer have been removed in
favor of accessor functions, we can remove it.
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Fix Amlogic Meson host controller driver build failure (Corentin
Labbe)"
* tag 'pci-v5.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: amlogic: Fix build failure due to missing gpio header
|
|
linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup:
[ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144
[ 5.178826] called from state READY
....
[ 5.264111] [<c0629fd4>] (phy_start_aneg) from [<c0e3e720>] (mtk_init+0x414/0x47c)
[ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800
[ 5.277256] [<c0e3e30c>] (mtk_init) from [<c07dabbc>] (register_netdevice+0x98/0x51c)
[ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800
[ 5.291693] [<c07dab24>] (register_netdevice) from [<c07db06c>] (register_netdev+0x2c/0x44)
[ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800
[ 5.306646] [<c07db040>] (register_netdev) from [<c06326d8>] (mtk_probe+0x668/0x7ac)
[ 5.314336] r5:dea2e604 r4:dea2e040
[ 5.317890] [<c0632070>] (mtk_probe) from [<c05a78fc>] (platform_drv_probe+0x58/0xa8)
[ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000
[ 5.333445] r4:deacea10
[ 5.335963] [<c05a78a4>] (platform_drv_probe) from [<c05a5248>] (really_probe+0x2d8/0x424)
maybe other boards using this generic driver are affected
v2:
optimization:
- phy_set_max_speed() is only needed if you want to reduce the
max speed, typically if the PHY supports 1Gbps but the MAC
supports 100Mbps only.
- The pause parameters are autonegotiated. Except you have a specific
need you normally don't need to manually fiddle with this.
- phy_start_aneg() is called implicitly by the phylib state machine,
you shouldn't call it manually except you have a good excuse.
- netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't
needed. It's done by phy_link_change() in phylib.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 6390 copper ports have an errata which require poking magic values
into undocumented magic registers and then performing a software
reset.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A network device stack with multiple layers of bonding devices can
trigger a false positive lockdep warning. Adding lockdep nest levels
fixes this. Update the level on both enslave and unlink, to avoid the
following series of events ..
ip netns add test
ip netns exec test bash
ip link set dev lo addr 00:11:22:33:44:55
ip link set dev lo down
ip link add dev bond1 type bond
ip link add dev bond2 type bond
ip link set dev lo master bond1
ip link set dev bond1 master bond2
ip link set dev bond1 nomaster
ip link set dev bond2 master bond1
.. from still generating a splat:
[ 193.652127] ======================================================
[ 193.658231] WARNING: possible circular locking dependency detected
[ 193.664350] 4.20.0 #8 Not tainted
[ 193.668310] ------------------------------------------------------
[ 193.674417] ip/15577 is trying to acquire lock:
[ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290
[ 193.687851]
but task is already holding lock:
[ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290
[..]
[ 193.851092] lock_acquire+0xa7/0x190
[ 193.855138] _raw_spin_lock_nested+0x2d/0x40
[ 193.859878] bond_get_stats+0x58/0x290
[ 193.864093] dev_get_stats+0x5a/0xc0
[ 193.868140] bond_get_stats+0x105/0x290
[ 193.872444] dev_get_stats+0x5a/0xc0
[ 193.876493] rtnl_fill_stats+0x40/0x130
[ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0
[ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0
[ 193.890091] rtnetlink_event+0x5b/0xa0
[ 193.894320] raw_notifier_call_chain+0x43/0x60
[ 193.899225] netdev_change_features+0x50/0xa0
[ 193.904044] bond_compute_features.isra.46+0x1ab/0x270
[ 193.909640] bond_enslave+0x141d/0x15b0
[ 193.913946] do_set_master+0x89/0xa0
[ 193.918016] do_setlink+0x37c/0xda0
[ 193.921980] __rtnl_newlink+0x499/0x890
[ 193.926281] rtnl_newlink+0x48/0x70
[ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0
[ 193.934801] netlink_rcv_skb+0xd1/0x110
[ 193.939103] rtnetlink_rcv+0x15/0x20
[ 193.943151] netlink_unicast+0x3b5/0x520
[ 193.947544] netlink_sendmsg+0x2fd/0x3f0
[ 193.951942] sock_sendmsg+0x38/0x50
[ 193.955899] ___sys_sendmsg+0x2ba/0x2d0
[ 193.960205] __x64_sys_sendmsg+0xad/0x100
[ 193.964687] do_syscall_64+0x5a/0x460
[ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into drm-fixes
- Powerplay fixes
- Virtual display pinning fixes
- Golden register updates for vega
- Pitch and gem size validation fixes
- Fix for error case in sr-iov init
- Disable page tables in system memory on RV due to issues with IOMMU
reported on some platforms
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109204336.3315-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This tag contains a handful of updates that slipped through the cracks
during the merge window due to the holidays. The fixes are mostly
independent, with the exception of one larger audit-related branch.
Core RISC-V updates:
- The BSS has been moved, which shrinks flat images.
- A fix to test-bpf so it compiles on RV64I-based systems.
- A fix to respect the kernel commandline when there is no device
tree.
- A fix to prevent CPUs from trying to put themselves to sleep when
bringing down the system.
- Support for MODULE_SECTIONS on RV32I-based systems.
- [new in v2] The addition of an SBI earlycon driver. This is
definately a new feature, but I'd like to include it now because I
dropped this patch when submitting the merge window PR that removed
our EARLY_PRINTK support.
RISC-V audit updates:
- The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
- The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit}
get defined.
- A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS
As usual, I've tested this by booting a Fedora-based image on a recent
QEMU (this time just whatever I had lying around).
* tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
tty/serial: Add RISC-V SBI earlycon support
riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig
riscv: fix trace_sys_exit hook
riscv: define CREATE_TRACE_POINTS in ptrace.c
riscv: define NR_syscalls in unistd.h
riscv: audit: add audit hook in do_syscall_trace_enter/exit()
riscv: add audit support
RISC-V: Support MODULE_SECTIONS mechanism on RV32
MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer
MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree
riscv: don't stop itself in smp_send_stop
arch: riscv: support kernel command line forcing when no DTB passed
tools uapi: fix RISC-V 64-bit support
RISC-V: Make BSS section as the last section in vmlinux.lds.S
|
|
Pull VFIO fixes from Alex Williamson:
- Fix trace header include path for in-tree builds (Masahiro Yamada)
- Fix overflow in unmap wrap-around test (Alex Williamson)
* tag 'vfio-v5.0-rc2' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix unmap overflow off-by-one
vfio/pci: set TRACE_INCLUDE_PATH to fix the build error
|
|
Pull mtd fixes from Boris Brezillon:
"Core MTD Fixes:
- Fix a bug introduced when exposing MTD devs as NVMEM providers and
check for add_mtd_device() return code everywhere
raw NAND fixes:
- Fix a memory corruption in the QCOM driver"
* tag 'mtd/fixes-for-5.0-rc2' of git://git.infradead.org/linux-mtd:
mtd: rawnand: qcom: fix memory corruption that causes panic
mtd: Check add_mtd_device() ret code
mtd: Fix the check on nvmem_register() ret code
|
|
There are some lines that have indentation issues, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are handful of lines that have indentation issues, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BUG: unable to handle kernel NULL pointer dereference at 00000000000000d1
Call Trace:
? napi_gro_frags+0xa7/0x2c0
tun_get_user+0xb50/0xf20
tun_chr_write_iter+0x53/0x70
new_sync_write+0xff/0x160
vfs_write+0x191/0x1e0
__x64_sys_write+0x5e/0xd0
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I think there is a subtle race between sending a packet via tap and
attaching it:
CPU0: CPU1:
tun_chr_ioctl(TUNSETIFF)
tun_set_iff
tun_attach
rcu_assign_pointer(tfile->tun, tun);
tun_fops->write_iter()
tun_chr_write_iter
tun_napi_alloc_frags
napi_get_frags
napi->skb = napi_alloc_skb
tun_napi_init
netif_napi_add
napi->skb = NULL
napi->skb is NULL here
napi_gro_frags
napi_frags_skb
skb = napi->skb
skb_reset_mac_header(skb)
panic()
Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to
be the last thing we do in tun_attach(); this should guarantee that when we
call tun_get() we always get an initialized object.
v2 changes:
* remove extra napi_mutex locks/unlocks for napi operations
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The problem is that we call this with a spin lock held.
The call tree is:
pvcalls_front_accept() holds bedata->socket_lock.
-> create_active()
-> __get_free_pages() uses GFP_KERNEL
The create_active() function is only called from pvcalls_front_accept()
with a spin_lock held, The allocation is not allowed to sleep and
GFP_KERNEL is not sufficient.
This issue was detected by using the Coccinelle software.
v2: Add a function doing the allocations which is called
outside the lock and passing the allocated data to
create_active().
v3: Use the matching deallocators i.e., free_page()
and free_pages(), respectively.
v4: It would be better to pre-populate map (struct sock_mapping),
rather than introducing one more new struct.
v5: Since allocating the data outside of this call it should also
be freed outside, when create_active() fails.
Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and
use GFP_KERNEL instead.
v6: Drop the superfluous calls.
Suggested-by: Juergen Gross <jgross@suse.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: xen-devel@lists.xenproject.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
[ 2.364486] WARNING: CPU: 0 PID: 60 at ./arch/powerpc/include/asm/io.h:837 dma_nommu_map_page+0x44/0xd4
[ 2.373579] CPU: 0 PID: 60 Comm: cryptomgr_test Tainted: G W 4.20.0-rc5-00560-g6bfb52e23a00-dirty #531
[ 2.384740] NIP: c000c540 LR: c000c584 CTR: 00000000
[ 2.389743] REGS: c95abab0 TRAP: 0700 Tainted: G W (4.20.0-rc5-00560-g6bfb52e23a00-dirty)
[ 2.400042] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24042204 XER: 00000000
[ 2.406669]
[ 2.406669] GPR00: c02f2244 c95abb60 c6262990 c95abd80 0000256a 00000001 00000001 00000001
[ 2.406669] GPR08: 00000000 00002000 00000010 00000010 24042202 00000000 00000100 c95abd88
[ 2.406669] GPR16: 00000000 c05569d4 00000001 00000010 c95abc88 c0615664 00000004 00000000
[ 2.406669] GPR24: 00000010 c95abc88 c95abc88 00000000 c61ae210 c7ff6d40 c61ae210 00003d68
[ 2.441559] NIP [c000c540] dma_nommu_map_page+0x44/0xd4
[ 2.446720] LR [c000c584] dma_nommu_map_page+0x88/0xd4
[ 2.451762] Call Trace:
[ 2.454195] [c95abb60] [82000808] 0x82000808 (unreliable)
[ 2.459572] [c95abb80] [c02f2244] talitos_edesc_alloc+0xbc/0x3c8
[ 2.465493] [c95abbb0] [c02f2600] ablkcipher_edesc_alloc+0x4c/0x5c
[ 2.471606] [c95abbd0] [c02f4ed0] ablkcipher_encrypt+0x20/0x64
[ 2.477389] [c95abbe0] [c02023b0] __test_skcipher+0x4bc/0xa08
[ 2.483049] [c95abe00] [c0204b60] test_skcipher+0x2c/0xcc
[ 2.488385] [c95abe20] [c0204c48] alg_test_skcipher+0x48/0xbc
[ 2.494064] [c95abe40] [c0205cec] alg_test+0x164/0x2e8
[ 2.499142] [c95abf00] [c0200dec] cryptomgr_test+0x48/0x50
[ 2.504558] [c95abf10] [c0039ff4] kthread+0xe4/0x110
[ 2.509471] [c95abf40] [c000e1d0] ret_from_kernel_thread+0x14/0x1c
[ 2.515532] Instruction dump:
[ 2.518468] 7c7e1b78 7c9d2378 7cbf2b78 41820054 3d20c076 8089c200 3d20c076 7c84e850
[ 2.526127] 8129c204 7c842e70 7f844840 419c0008 <0fe00000> 2f9e0000 54847022 7c84fa14
[ 2.533960] ---[ end trace bf78d94af73fe3b8 ]---
[ 2.539123] talitos ff020000.crypto: master data transfer error
[ 2.544775] talitos ff020000.crypto: TEA error: ISR 0x20000000_00000040
[ 2.551625] alg: skcipher: encryption failed on test 1 for ecb-aes-talitos: ret=22
IV cannot be on stack when CONFIG_VMAP_STACK is selected because the stack
cannot be DMA mapped anymore.
This patch copies the IV into the extended descriptor.
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch moves the mapping of IV after the kmalloc(). This
avoids having to unmap in case kmalloc() fails.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We free "sr" and then dereference it on the next line.
Fixes: c9613335bf4f ("crypto: cavium/nitrox - Added AEAD cipher support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The addition of Chacha20 + Poly1305 authenc support inadvertently broke
detection of algorithms supported by MDHA (Message Digest Hardware
Accelerator), fix it.
Fixes: d6bbd4eea243 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Recent changes - probably DMA API related (generic and/or arm64-specific) -
exposed a case where driver maps a zero-length buffer:
ahash_init()->ahash_update()->ahash_final() with a zero-length string to
hash
kernel BUG at kernel/dma/swiotlb.c:475!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 1823 Comm: cryptomgr_test Not tainted 4.20.0-rc1-00108-g00c9fe37a7f2 #1
Hardware name: LS1046A RDB Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : swiotlb_tbl_map_single+0x170/0x2b8
lr : swiotlb_map_page+0x134/0x1f8
sp : ffff00000f79b8f0
x29: ffff00000f79b8f0 x28: 0000000000000000
x27: ffff0000093d0000 x26: 0000000000000000
x25: 00000000001f3ffe x24: 0000000000200000
x23: 0000000000000000 x22: 00000009f2c538c0
x21: ffff800970aeb410 x20: 0000000000000001
x19: ffff800970aeb410 x18: 0000000000000007
x17: 000000000000000e x16: 0000000000000001
x15: 0000000000000019 x14: c32cb8218a167fe8
x13: ffffffff00000000 x12: ffff80097fdae348
x11: 0000800976bca000 x10: 0000000000000010
x9 : 0000000000000000 x8 : ffff0000091fd6c8
x7 : 0000000000000000 x6 : 00000009f2c538bf
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 00000009f2c538c0
x1 : 00000000f9fff000 x0 : 0000000000000000
Process cryptomgr_test (pid: 1823, stack limit = 0x(____ptrval____))
Call trace:
swiotlb_tbl_map_single+0x170/0x2b8
swiotlb_map_page+0x134/0x1f8
ahash_final_no_ctx+0xc4/0x6cc
ahash_final+0x10/0x18
crypto_ahash_op+0x30/0x84
crypto_ahash_final+0x14/0x1c
__test_hash+0x574/0xe0c
test_hash+0x28/0x80
__alg_test_hash+0x84/0xd0
alg_test_hash+0x78/0x144
alg_test.part.30+0x12c/0x2b4
alg_test+0x3c/0x68
cryptomgr_test+0x44/0x4c
kthread+0xfc/0x128
ret_from_fork+0x10/0x18
Code: d34bfc18 2a1a03f7 1a9f8694 35fff89a (d4210000)
Cc: <stable@vger.kernel.org>
Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the ccree crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the bcm crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
This also fixes the DES weak key check to actually be done on the right
key. (It was checking the authentication key, not the encryption key...)
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
commit 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
refactored the workaround code to have functions per-engine, but didn't
call any of them from logical_xcs_ring_init. Since we do have a non-RCS
workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call
intel_engine_init_workarounds for non-RCS engines.
Note that whitelist is still RCS-only.
v2: move the call to logical_ring_init (Chris)
Fixes: 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-2-daniele.ceraolospurio@intel.com
(cherry picked from commit a60acb223fecc77531540196008ac2de89e2a162)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If we fail to pin the ggtt vma slot for the ppgtt page tables, we need
to unwind the locals before reporting the error. Or else on subsequent
attempts to bind the page tables into the ggtt, we will already believe
that the vma has been pinned and continue on blithely. If something else
should happen to be at that location, choas ensues.
Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v4.19+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk
(cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Although commit fb6f0b64e455 ("drm/i915: Prevent machine hang from
Broxton's vtd w/a and error capture") applied cleanly after a 24 month
hiatus, the code had moved on with new methods for peeking and fetching
the captured gpu info. Make sure we catch all uses of the stashed error
state and avoid dereferencing the error pointer.
v2: Move error pointer determination into i915_gpu_capture_state
v3: Restore early check to avoid capturing and then throwing away
subsequent GPU error states.
Fixes: fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207110554.19897-1-chris@chris-wilson.co.uk
(cherry picked from commit e6154e4cb8b0d3692f84ca0d66b4e1ba0389b134)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
i915 yet don't support PSR in Apple panels, so lets keep it disabled
while we work on that.
v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to
DP_DPCD_QUIRK_NO_PSR (Ville)
v3:
Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani)
Fixed typo in comment of the new quirk entry(Jani)
Fixes: 598c6cfe0690 (drm/i915/psr: Enable PSR1 on gen-9+ HW)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-1-jose.souza@intel.com
(cherry picked from commit 7c5c641a930ed06ca317ee39faee7d5824266348)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We need to call drm_modeset_acquire_fini() when drm_atomic_state_alloc()
failed or call drm_modeset_acquire_init() after drm_atomic_state_alloc()
succeeded.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1547115571-21219-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
|
|
Cast autosuspend_delay to u64 to make sure that the full computation
of 'expires' or slack will be done in u64, even on 32bits arch.
Otherwise, any delay greater than 2^31 nsec can overflow if signed
32bits is used when converting delay from msec to nsec.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers)
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list. During this window, we set
"already" and return 0.
Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written. In particular, "rbd unmap"
will retry the write multiple times a second:
10:28:05.463299 write(4, "0", 1) = 0
10:28:05.463509 write(4, "0", 1) = 0
10:28:05.463720 write(4, "0", 1) = 0
10:28:05.463942 write(4, "0", 1) = 0
10:28:05.464155 write(4, "0", 1) = 0
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Strict requirement of pixclock to be zero breaks support of SDL 1.2
which contains hardcoded table of supported video modes with non-zero
pixclock values[1].
To better understand which pixclock values are considered valid and how
driver should handle these values, I briefly examined few existing fbdev
drivers and documentation in Documentation/fb/. And it looks like there
are no strict rules on that and actual behaviour varies:
* some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c);
* some treat (pixclock == 0) as invalid value which leads to
-EINVAL (clps711x-fb.c);
* some pass converted pixclock value to hardware (uvesafb.c);
* some are trying to find nearest value from predefined table
(vga16fb.c, video_gx.c).
Given this, I believe that it should be safe to just ignore this value if
changing is not supported. It seems that any portable fbdev application
which was not written only for one specific device working under one
specific kernel version should not rely on any particular behaviour of
pixclock anyway.
However, while enabling SDL1 applications to work out of the box when
there is no /etc/fb.modes with valid settings, this change affects the
video mode choosing logic in SDL. Depending on current screen
resolution, contents of /etc/fb.modes and resolution requested by
application, this may lead to user-visible difference (not always):
image will be displayed in a right way, but it will be aligned to the
left instead of center. There is no "right behaviour" here as well, as
emulated fbdev, opposing to old fbdev drivers, simply ignores any
requsts of video mode changes with resolutions smaller than current.
The easiest way to reproduce this problem is to install sdl-sopwith[2],
remove /etc/fb.modes file if it exists, and then try to run sopwith
from console without X. At least in Fedora 29, sopwith may be simply
installed from standard repositories.
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings
[2] http://sdl-sopwith.sourceforge.net/
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 79e539453b34e ("DRM: i915: add mode setting support")
Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware")
Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
|
|
SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.
Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.
Here is the steps required to reproduce this problem exactly:
1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
support. SDL should be compiled with fbdev support (which is
on by default).
2) Create /etc/fb.modes with following contents (values seems
not used, and just required to trigger problematic code in
SDL):
mode "test"
geometry 1 1 1 1 1
timings 1 1 1 1 1 1 1
endmode
3) Create ~/.fceux/fceux.cfg with following contents:
SDL.Hotkeys.Quit = 27
SDL.DoubleBuffering = 1
4) Ensure that screen resolution is at least 1280x960 (e.g.
append "video=Virtual-1:1280x960-32" to the kernel cmdline
for qemu/QXL).
5) Try to run fceux on VT with some ROM file[3]:
# ./fceux color_test.nes
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes
Reported-by: saahriktu <mail@saahriktu.org>
Suggested-by: saahriktu <mail@saahriktu.org>
Cc: stable@vger.kernel.org
Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
|
|
If we don't drop caches used in old offset or block_size, we can get old data
from new offset/block_size, which gives unexpected data to user.
For example, Martijn found a loopback bug in the below scenario.
1) LOOP_SET_FD loads first two pages on loop file
2) LOOP_SET_STATUS64 changes the offset on the loop file
3) mount is failed due to the cached pages having wrong superblock
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Reported-by: Martijn Coenen <maco@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In RISC-V, the M-mode runtime firmware provide SBI calls for
debug prints. This patch adds earlycon support using RISC-V
SBI console calls. To enable it, just pass "earlycon=sbi" in
kernel parameters.
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
We hit a problem with IOMMU with that. Disable until we have time to
debug further.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
effect asics: VEGA10 and VEGA12
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ctrl->cntlid will already be initialized from id->cntlid for
non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS
controllers this field should already be initialized, otherwise the
check
if (ctrl->cntlid != le16_to_cpu(id->cntlid))
below will always be a no-op.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If a device provides an NQN it is expected to be globally unique.
Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did
not satisfy this requirement. In these circumstances if a system has >1
affected device then only one device is enabled. If this quirk is enabled
then the device supplied subnqn is ignored and we fallback to generating
one as if the field was empty. In this case we also suppress the version
check so we don't print a warning when the quirk is enabled.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to preserve the leading zeros in the vid and ssvid when generating
a unique NQN. Truncating these may lead to naming collisions.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When nvme_init_identify() fails the ANA log buffer is deallocated
but _not_ set to NULL. This can cause double free oops when this
controller is deleted without ever being reconnected.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Even if user-space sent it to us, it got it wrong so lets
help by disallowing it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For sure we are a fabric driver.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We should never touch the opal device from the transport driver.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is an out of bounds array access in nvme_cqe_peding().
When enable irq_thread for nvme interrupt, there is racing between the
nvmeq->cq_head updating and reading.
nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head
equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending()
uses its value as an array index, the index will be out of bounds.
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
[hch: slight coding style update]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If the driver is unable to create a subset of IO queues for any reason,
the read/write and polled queue sets will not match the actual allocated
hardware contexts. This leaves gaps in the CPU affinity mappings and
causes the following kernel panic after blk_mq_map_queue_type() returns
a NULL hctx.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000198
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440
RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286
RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820
RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f
R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008
R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
blk_mq_init_queue+0x35/0x60
nvme_validate_ns+0xc6/0x7c0 [nvme_core]
? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core]
nvme_scan_work+0xc8/0x340 [nvme_core]
? __wake_up_common+0x6d/0x120
? try_to_wake_up+0x55/0x410
process_one_work+0x1e9/0x3d0
worker_thread+0x2d/0x3d0
? process_one_work+0x3d0/0x3d0
kthread+0x111/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
Modules linked in: nvme nvme_core serio_raw
CR2: 0000000000000198
Fix by re-running the interrupt vector setup from scratch using a reduced
count that may be successful until the created queues matches the irq
affinity plus polling queue sets.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When using HMB the PCIe host driver allocates host_mem_desc_bufs using
dma_alloc_attrs() but frees them using dma_free_coherent(). Use the
correct dma_free_attrs() function to free the buffers.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We only set the nr_maps to 3 if poll queues are supported.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull arch/csky bug fixes from Guo Ren:
"Here are some fixup patches for 5.0-rc1:
- fix compile error with pte_alloc
- fix handle_irq_perbit break irq flow
- fix CACHEV1 store instruction fast retire
- fix module relocation error with 807 & 860
- add csky kernel features to documentation"
* tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux:
irqchip/csky: fixup handle_irq_perbit break irq
csky: fixup compile error with pte_alloc
csky: fixup CACHEV1 store instruction fast retire
csky: fixup relocation error with 807 & 860
Documentation/features: Add csky kernel features
|
|
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on
frequency changes to provide scale-invariant load-tracking signals to
the scheduler. However, in the slow path, it does so while specifying
the current and max frequencies in different units, hence resulting in a
broken freq_scale factor.
Fix this by passing all frequencies in KHz, as stored in the CPUFreq
frequency table.
Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: 4.17+ <stable@vger.kernel.org> # v4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
tc358767 driver sets the connector type always to eDP.
This patch sets the type to DP if there is no panel defined, which
implies that there's a DP connector on the board.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com
|
|
The H and V syncs of the DP output are always set to active high. This
patch fixes the syncs by configuring them according to the videomode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
|
