summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-17clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ↵Marc Zyngier
ordering issue The MMIO timer base address gets published after we have registered the callbacks and the interrupt handler, which is... a bit dangerous. Fix this by moving the base address publication to the point where we register the timer, and expose a pointer to the timer structure itself rather than a naked value. Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211017124225.3018098-7-maz@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function namesMarc Zyngier
The '_tval' name in the erratum handling function names doesn't make much sense anymore (and they were using CVAL the first place). Drop the _tval tag. Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211017124225.3018098-6-maz@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17clocksource/drivers/arm_arch_timer: Move system register timer programming ↵Marc Zyngier
over to CVAL In order to cope better with high frequency counters, move the programming of the timers from the countdown timer (TVAL) over to the comparator (CVAL). The programming model is slightly different, as we now need to read the current counter value to have an absolute deadline instead of a relative one. There is a small overhead to this change, which we will address in the following patches. Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211017124225.3018098-5-maz@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17clocksource/drivers/arm_arch_timer: Extend write side of timer register ↵Marc Zyngier
accessors to u64 The various accessors for the timer sysreg and MMIO registers are currently hardwired to 32bit. However, we are about to introduce the use of the CVAL registers, which require a 64bit access. Upgrade the write side of the accessors to take a 64bit value (the read side is left untouched as we don't plan to ever read back any of these registers). No functional change expected. Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211017124225.3018098-4-maz@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessorsMarc Zyngier
The arch timer driver never reads the various TVAL registers, only writes to them. It is thus pointless to provide accessors for them and to implement errata workarounds. Drop these read-side accessors, and add a couple of BUG() statements for the time being. These statements will be removed further down the line. Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211017124225.3018098-3-maz@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17clocksource/arm_arch_timer: Add build-time guards for unhandled register ↵Marc Zyngier
accesses As we are about to change the registers that are used by the driver, start by adding build-time checks to ensure that we always handle all registers and access modes. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211017124225.3018098-2-maz@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17brd: reduce the brd_devices_mutex scopeTetsuo Handa
As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then, we can avoid holding global mutex during add_disk()/del_gendisk() as with commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope"). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-16scsi: sd: Fix crashes in sd_resume_runtime()Miles Chen
After commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), the following crash was observed. static int sd_resume_runtime(struct device *dev) { struct scsi_disk *sdkp = dev_get_drvdata(dev); struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash if (sdp->ignore_media_change) { ... } It is possible for sdkp to be NULL in sd_resume_runtime(). To fix this crash, follow sd_resume() to test if sdkp is NULL before dereferencing it. Crash: [ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 4.696591][ T151] Mem abort info: [ 4.697919][ T151] ESR = 0x96000005 [ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.701990][ T151] SET = 0, FnV = 0 [ 4.702513][ T151] EA = 0, S1PTW = 0 [ 4.704431][ T151] FSC = 0x05: level 1 translation fault [ 4.705254][ T151] Data abort info: [ 4.705806][ T151] ISV = 0, ISS = 0x00000005 [ 4.706484][ T151] CM = 0, WnR = 0 [ 4.707048][ T151] [0000000000000008] user address but active_mm is swapper [ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 4.832361][ T151] Kernel Offset: 0x12acc80000 from 0xffffffc010000000 [ 4.833254][ T151] PHYS_OFFSET: 0x40000000 [ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c [ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4 [ 4.835916][ T151] sp : ffffffc0110db8d0 [ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001 [ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0 [ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000 [ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c [ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000 [ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078 [ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac [ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d [ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0 [ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001 [ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c [ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000 [ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001 [ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003 [ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260 [ 4.856708][ T151] die+0x16c/0x59c [ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210 [ 4.857833][ T151] do_page_fault+0xa4/0x654 [ 4.858418][ T151] do_translation_fault+0x6c/0x1b0 [ 4.859083][ T151] do_mem_abort+0x68/0x10c [ 4.859655][ T151] el1_abort+0x40/0x64 [ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88 [ 4.860834][ T151] el1h_64_sync+0x7c/0x80 [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 [ 4.864489][ T151] sd_probe+0x30/0x428 [ 4.865016][ T151] really_probe+0x14c/0x500 [ 4.865602][ T151] __driver_probe_device+0xb4/0x18c [ 4.866278][ T151] driver_probe_device+0x60/0x2c4 [ 4.866931][ T151] __device_attach_driver+0x228/0x2bc [ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c [ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4 [ 4.869038][ T151] process_one_work+0x3ac/0x590 [ 4.869670][ T151] worker_thread+0x320/0x758 [ 4.870265][ T151] kthread+0x2e8/0x35c [ 4.870792][ T151] ret_from_fork+0x10/0x20 Link: https://lore.kernel.org/r/20211015074654.19615-1-miles.chen@mediatek.com Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") Cc: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: mpi3mr: Fix duplicate device entries when scanning through sysfsSreekanth Reddy
When scanning devices through the 'scan' attribute in sysfs, the user will observe duplicate device entries in lsscsi command output. Set the shost's max_channel to zero to avoid this. Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16pinctrl: amd: disable and mask interrupts on probeSachi King
Some systems such as the Microsoft Surface Laptop 4 leave interrupts enabled and configured for use in sleep states on boot, which cause unexpected behaviour such as spurious wakes and failed resumes in s2idle states. As interrupts should not be enabled until they are claimed and explicitly enabled, disabling any interrupts mistakenly left enabled by firmware should be safe. Signed-off-by: Sachi King <nakato@nakato.io> Link: https://lore.kernel.org/r/20211009033240.21543-1-nakato@nakato.io Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-16clocksource/drivers/arc_timer: Eliminate redefined macro errorRandy Dunlap
In drivers/clocksource/, 3 drivers use "TIMER_CTRL_IE" with 3 different values. Two of them (mps2-timer.c and timer-sp804.c/timer-sp.h) are localized and left unmodifed. One of them uses a shared header file (<soc/arc/timers.h>), which is what is causing the "redefined" warnings, so change the macro name in that driver only. Also change the TIMER_CTRL_NH macro name. Both macro names are prefixed with "ARC_" to reduce the likelihood of future name collisions. In file included from ../drivers/clocksource/timer-sp804.c:24: ../drivers/clocksource/timer-sp.h:25: error: "TIMER_CTRL_IE" redefined [-Werror] 25 | #define TIMER_CTRL_IE (1 << 5) /* VR */ ../include/soc/arc/timers.h:20: note: this is the location of the previous definition 20 | #define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */ Fixes: b26c2e3823ba ("ARC: breakout timer include code into separate header") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@kernel.org> Cc: linux-snps-arc@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Acked-by: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210924020825.20317-1-rdunlap@infradead.org
2021-10-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "Clk driver fixes for critical issues found in the past few weeks: - Select gdsc config so qcom sm6350 driver probes - Fix a register offset in qcom gcc-sm6115 so the correct clk is controlled - Fix inverted logic in Renesas RZ/G2L .is_enabled() - Mark some more clks critical in Renesas clk driver - Remove a duplicate clk in the agilex driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: add select QCOM_GDSC for SM6350 clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc clk: socfpga: agilex: fix duplicate s2f_user0_clk clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
2021-10-16Merge tag 'for-5.15/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target to skip redundant processing on I/O errors. - Fix request-based DM so that it doesn't queue request to blk-mq when DM device is suspended. - Fix DM core mempool NULL pointer race when completing IO. - Make DM clone target's 'descs' array static. * tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix mempool NULL pointer race when completing IO dm rq: don't queue request to blk-mq during DM suspend dm clone: make array 'descs' static dm verity: skip redundant verity_handle_err() on I/O errors
2021-10-16Merge tag 'arm-soc-fixes-5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A small number fixes this time, mostly touching actual code: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change - A fixup for a boot regression caused by my own rework for the Qualcomm SCM driver - Multiple bugfixes for the Arm FFA and optee firmware drivers, addressing problems when they are built as a loadable module - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing VEC (video encoder), MDIO bus controller #address-cells/#size-cells, SDIO voltage and PCIe host bridge dtc warnings" * tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: register reset controller from a platform driver iommu/arm: fix ARM_SMMU_QCOM compilation ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting tee: optee: Fix missing devices unregister during optee_remove ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 firmware: arm_ffa: Fix __ffa_devices_unregister firmware: arm_ffa: Add missing remove callback to ffa_bus_type
2021-10-16Merge tag 'pci-v5.15-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly
2021-10-16Merge tag 'acpi-5.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Add a missing device ID to a quirk list in the suspend-to-idle support code" * tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Include alternate AMDI0005 id in special behaviour
2021-10-15Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor
A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: snvs_pwrkey - add clk handlingUwe Kleine-König
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-14 Brett ensures RDMA nodes are removed during release and rebuild. He also corrects fw.mgmt.api to include the patch number for proper identification. Dave stops ida_free() being called when an IDA has not been allocated. Michal corrects the order of parameters being provided and the number of entries skipped for UDP tunnels. ==================== Link: https://lore.kernel.org/r/20211014181953.3538330-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15Merge tag 'gpio-fixes-for-v5.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix module autoloading on gpio-74x164 after a revert of OF modaliases - fix problems with the bias setting in gpio-pca953x - fix a use-after-free bug in gpio-mockup by using software nodes * tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mockup: Convert to use software nodes gpio: pca953x: Improve bias setting gpio: 74x164: Add SPI device ID table
2021-10-15Merge tag 'spi-fix-v5.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes. Mostly driver specific but there's one in the core which fixes a deadlock when adding devices on spi-mux that's triggered because spi-mux is a SPI device which is itself a SPI controller and so can instantiate devices when registered. We were using a global lock to protect against reusing chip selects but they're a per controller thing so moving the lock per controller resolves that" * tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi-mux: Fix false-positive lockdep splats spi: Fix deadlock when adding SPI controllers on SPI buses spi: bcm-qspi: clear MSPI spifie interrupt during probe spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround spi: mediatek: skip delays if they are 0 spi: atmel: Fix PDC transfer setup bug spi: spidev: Add SPI ID table spi: Use 'flash' node name instead of 'spi-flash' in example
2021-10-15Merge tag 'mtd/fixes-for-5.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fix from Miquel Raynal: "Raw NAND controller driver fix: - Qcom: Update code word value for raw reads (QPIC v2+)" * tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: qcom: Update code word value for raw read
2021-10-15Merge tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "It has a few scattered msm and i915 fixes, a few core fixes and a mediatek feature revert. I've had to pick a bunch of patches into this, as the drm-misc-fixes tree had a bunch of vc4 patches I wasn't comfortable with sending to you at least as part of this, they were delayed due to your reverts. If it's really useful as fixes I'll do a separate pull. Summary: Core: - clamp fbdev size - edid cap blocks read to avoid out of bounds panel: - fix missing crc32 dependency msm: - Fix a new crash on dev file close if the dev file was opened when GPU is not loaded (such as missing fw in initrd) - Switch to single drm_sched_entity per priority level per drm_file to unbreak multi-context userspace - Serialize GMU access to fix GMU OOB errors - Various error path fixes - A couple integer overflow fixes - Fix mdp5 cursor plane WARNs i915: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call hyperv: - hide hw pointer nouveau: - fix engine selection bit r128: - fix UML build rcar-du: - unconncted LVDS regression fix mediatek: - revert CMDQ refinement patches" * tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/panel: olimex-lcd-olinuxino: select CRC32 drm/r128: fix build for UML drm/nouveau/fifo: Reinstate the correct engine bit programming drm/hyperv: Fix double mouse pointers drm/fbdev: Clamp fbdev surface size if too large drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read drm/i915: Free the returned object of acpi_evaluate_dsm() drm/i915: Fix bug in user proto-context creation that leaked contexts drm: rcar-du: Don't create encoder for unconnected LVDS outputs drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready drm/msm/dsi/phy: fix clock names in 28nm_8960 phy drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ register drm/msm: Do not run snapshot on non-DPU devices drm/msm/a3xx: fix error handling in a3xx_gpu_init() drm/msm/a4xx: fix error handling in a4xx_gpu_init() drm/msm: Fix null pointer dereference on pointer edp drm/msm/mdp5: fix cursor-related warnings drm/msm: Avoid potential overflow in timeout_to_jiffies() ...
2021-10-15lan78xx: select CRC32Vegard Nossum
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9de6c30 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15Merge tag 'usb-serial-5.15-rc6' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.15-rc6 Here are some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: qcserial: add EM9191 QDL support USB: serial: option: add Quectel EC200S-CN module support USB: serial: option: add prod. id for Quectel EG91 USB: serial: option: add Telit LE910Cx composition 0x1204
2021-10-15ptp: fix error print of ptp_kvm on X86_64 platformKele Huang
Commit a86ed2cfa13c5 ("ptp: Don't print an error if ptp_kvm is not supported") fixes the error message print on ARM platform by only concerning about the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP. Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the same value 95. Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that -KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them. This patch fixes this by returning them to ptp_kvm_init() respectively. Signed-off-by: Kele Huang <huangkele@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15topology: Represent clusters of CPUs within a dieJonathan Cameron
Both ACPI and DT provide the ability to describe additional layers of topology between that of individual cores and higher level constructs such as the level at which the last level cache is shared. In ACPI this can be represented in PPTT as a Processor Hierarchy Node Structure [1] that is the parent of the CPU cores and in turn has a parent Processor Hierarchy Nodes Structure representing a higher level of topology. For example Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each cluster has 4 cpus. All clusters share L3 cache data, but each cluster has local L3 tag. On the other hand, each clusters will share some internal system bus. +-----------------------------------+ +---------+ | +------+ +------+ +--------------------------+ | | | CPU0 | | cpu1 | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ cluster | | tag | | | | | CPU2 | | CPU3 | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +----+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | L3 | | data | +-----------------------------------+ | | | +------+ +------+ | +-----------+ | | | | | | | | | | | | | +------+ +------+ +----+ L3 | | | | | | tag | | | | +------+ +------+ | | | | | | | | | | | +-----------+ | | | +------+ +------+ +--------------------------+ | +-----------------------------------| | | +-----------------------------------| | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | +----+ L3 | | | | +------+ +------+ | | tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +---+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | | | +-----------------------------------+ | | +-----------------------------------+ | | | +------+ +------+ +--------------------------+ | | | | | | | +-----------+ | | | +------+ +------+ | | | | | | | | L3 | | | | +------+ +------+ +--+ tag | | | | | | | | | | | | | | +------+ +------+ | +-----------+ | | | | +---------+ +-----------------------------------+ That means spreading tasks among clusters will bring more bandwidth while packing tasks within one cluster will lead to smaller cache synchronization latency. So both kernel and userspace will have a chance to leverage this topology to deploy tasks accordingly to achieve either smaller cache latency within one cluster or an even distribution of load among clusters for higher throughput. This patch exposes cluster topology to both kernel and userspace. Libraried like hwloc will know cluster by cluster_cpus and related sysfs attributes. PoC of HWLOC support at [2]. Note this patch only handle the ACPI case. Special consideration is needed for SMT processors, where it is necessary to move 2 levels up the hierarchy from the leaf nodes (thus skipping the processor core level). Note that arm64 / ACPI does not provide any means of identifying a die level in the topology but that may be unrelate to the cluster level. [1] ACPI Specification 6.3 - section 5.2.29.1 processor hierarchy node structure (Type 0) [2] https://github.com/hisilicon/hwloc/tree/linux-cluster Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210924085104.44806-2-21cnbao@gmail.com
2021-10-15eeprom: 93xx46: fix MODULE_DEVICE_TABLEArnd Bergmann
The newly added SPI device ID table does not work because the entry is incorrectly copied from the OF device table. During build testing, this shows as a compile failure when building it as a loadable module: drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table' MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); Change the entry to refer to the correct symbol. Fixes: 137879f7ff23 ("eeprom: 93xx46: Add SPI device ID table") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-15drm/panel: olimex-lcd-olinuxino: select CRC32Vegard Nossum
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15drm/r128: fix build for UMLRandy Dunlap
Fix a build error on CONFIG_UML, which does not support (provide) wbinvd(). UML can use the generic mb() instead. ../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’: ../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration] wbinvd(); ^~~~~~ Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15drm/nouveau/fifo: Reinstate the correct engine bit programmingMarek Vasut
Commit 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") replaced fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned from the later g84_fifo_engine_id() are incremented by 1 compared to the previous g84_fifo_chan_engine() return values. This is fine either way for most of the code, except this one line where an engine bit programmed into the hardware is derived from the return value. Decrement the return value accordingly, otherwise the wrong engine bit is programmed into the hardware and that leads to the following failure: nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420 On the following hardware: lspci -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2) lspci -ns 01:00.0 01:00.0 0300: 10de:0a3c (rev a2) Fixes: 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") Signed-off-by: Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 5.12+ Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15drm/hyperv: Fix double mouse pointersDexuan Cui
Hyper-V supports a hardware cursor feature. It is not used by Linux VM, but the Hyper-V host still draws a point as an extra mouse pointer, which is unwanted, especially when Xorg is running. The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer. When the hyperv_drm driver was developed, the function synthvid_send_ptr() was not copied from the hyperv_fb driver. Fix the issue by adding the function into hyperv_drm. Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Deepak Rawat <drawat.floss@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15drm/fbdev: Clamp fbdev surface size if too largeThomas Zimmermann
Clamp the fbdev surface size of the available maximumi height to avoid failing to init console emulation. An example error is shown below. bad framebuffer height 2304, should be >= 768 && <= 768 [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22) This is especially a problem with drivers that have very small screen sizes and cannot over-allocate at all. v2: * reduce warning level (Ville) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Amanoel Dawod <kernel@amanoeldawod.com> Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com> Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks readDouglas Anderson
In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. Fixes: e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15Merge tag 'mediatek-drm-fixes-5.15' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.15 1. Revert series "CMDQ refinement of Mediatek DRM driver" Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org
2021-10-15Merge tag 'drm-intel-fixes-2021-10-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc6: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87zgrbvgls.fsf@intel.com
2021-10-14Merge tag 'net-5.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ...
2021-10-14ice: Print the api_patch as part of the fw.mgmt.apiBrett Creeley
Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: fix getting UDP tunnel entryMichal Swiatkowski
Correct parameters order in call to ice_tunnel_idx_to_entry function. Entry in sparse port table is correct when the idx is 0. For idx 1 one correct entry should be skipped, for idx 2 two of them should be skipped etc. Change if condition to be true when idx is 0, which means that previous valid entry of this tunnel type were skipped. Fixes: b20e6c17c468 ("ice: convert to new udp_tunnel infrastructure") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: Avoid crash from unnecessary IDA freeDave Ertman
In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. Fixes: d25a0fc41c1f9 ("ice: Initialize RDMA support") Reported-by: Jun Miao <jun.miao@windriver.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: Fix failure to re-add LAN/RDMA Tx queuesBrett Creeley
Currently if the VSI is rebuilt/removed and the RDMA PF driver is active the RDMA Tx queue scheduler node configuration will not be cleaned up. This will cause the rebuild/re-add of the VSI to fail due to the software structures not being correctly cleaned up for the VSI index. Fix this by always calling ice_rm_vsi_rdma_cfg() for all VSI. If there are no RDMA scheduler nodes created, then there is no harm in calling ice_rm_vsi_rdma_cfg(). This change applies to all VSI types, so if RDMA support is added for other VSI types they will also get this change. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Jerzy Wiktor Jurkowski <jerzy.wiktor.jurkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14Merge tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme into block-5.15Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares)" * tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme: nvme: fix per-namespace chardev deletion nvme-pci: Fix abort command id
2021-10-14mlxsw: thermal: Fix out-of-bounds memory accessesIdo Schimmel
Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: s2io: fix setting mac address during resumeArnd Bergmann
After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14spi-mux: Fix false-positive lockdep splatsUwe Kleine-König
io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls spi_setup() which results in a nested lock of io_mutex. add_lock is taken by spi_add_device(). The device_add() call in there can result in calling spi-mux's .probe() callback which registers its own spi controller which in turn results in spi_add_device() being called again. To fix this initialize the controller's locks already in spi_alloc_controller() to give spi_mux_probe() a chance to set the lockdep subclass. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-14spi: Fix deadlock when adding SPI controllers on SPI busesMark Brown
Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-14mmc: sdhci-pci: Read card detect from ACPI for Intel MerrifieldAndy Shevchenko
Intel Merrifield platform had been converted to use ACPI enumeration. However, the driver missed an update to retrieve card detect GPIO. Fix it here. Unfortunately we can't rely on CD GPIO state because there are two different PCB designs in the wild that are using the opposite card detection sense and there is no way to distinguish those platforms, that's why ignore CD GPIO completely and use it only as an event. Fixes: 4590d98f5a4f ("sfi: Remove framework for deprecated firmware") BugLink: https://github.com/edison-fw/meta-intel-edison/issues/135 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211013201723.52212-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-14EDAC/armada-xp: Fix output of uncorrectable error counterHans Potsch
The number of correctable errors is displayed as uncorrectable errors because the "SBE" error count is passed to both calls of edac_mc_handle_error(). Pass the correct uncorrectable error count to the second edac_mc_handle_error() call when logging uncorrectable errors. [ bp: Massage commit message. ] Fixes: 7f6998a41257 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC") Signed-off-by: Hans Potsch <hans.potsch@nokia.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com
generated by cgit (git 2.34.1) at 2025-09-29 15:39:22 +0000