summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-08media: venus: fix vpp frequency calculation for decoderMansur Alisha Shaik
In existing video driver implementation vpp frequency calculation in calculate_inst_freq() is always zero because the value of vpp_freq_per_mb is always zero for decoder. Fixed this by correcting the calculating the vpp frequency calculation for decoder. Fixes: 3cfe5815ce0e ("media: venus: Enable low power setting for encoder") Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: venus: vdec: update output buffer size during vdec_s_fmt()Mansur Alisha Shaik
Video driver maintains an internal context for the output buffer size. During S_fmt() on capture plane, the output buffer size is not updated in driver context. As a result, during buf_prepare(), the size of the vb2_plane and internal size of the buffer, as maintained by the driver, does not match. This leads to buf_prepare() failure. Update the instance context for the output buffer size during s_fmt(). Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: venus: helper: change log level for false warning messageMansur Alisha Shaik
In current video driver implementation in calculate_inst_freq() frequency is calculated based on filled_len. The filled_len may vary frame to frame, because of this in load_scale_v4() since frequency is calculated for all instances, driver is throwing false warning like "HW is overloaded". Hence to handle this, changed log level to low log message. Since the actual session rejection is happening in decide_core() based on load. Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: omap_vout: use dma_addr_t consistentlyArnd Bergmann
gcc notices that the driver mixes 'dma_addr_t' 'u8 *' and 'u32' to store DMA addresses: drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_vb2_prepare': drivers/media/platform/omap/omap_vout.c:979:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] vout->queued_buf_addr[vb->index] = (u8 *)buf_phy_addr; ^ drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_create_video_devices': drivers/media/platform/omap/omap_vout.c:1479:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] vout->fbuf.base = (void *)info.paddr; Use dma_addr_t everywhere here to avoid the type conversions and document what the address is used for. Assigning to vout->fbuf.base still requires a cast, since that is part of the driver independent data structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: vsp1: Add support for the V3U VSPDKieran Bingham
The V3U provides two VSPD instances, with a new update to the version register to detect the new SoC. Add the new version and model detection, and detail the features available in this module. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: vsp1: Simplify DRM UIF handlingKieran Bingham
In commit 6732f3139380 ("media: v4l: vsp1: Fix uif null pointer access") the handling of the UIF was over complicated, and the patch applied before review. Simplify it to keep the conditionals small. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: vsp1: Fix WPF macro namesKieran Bingham
The WPF IRQ enable and status macros have been incorrectly named WFP. Fix them accordingly, and update all uses of the macros. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: imx-jpeg: Remove soft reset between frames encodingMirela Rabulea
Remove soft reset between frames, which was merely a workaround, actually replace it with something less aggressive: clearing of jpeg stream buffer pointer, via STM_CTRL[BITBUF_PTR_CLR]. According to the reference manual, the BITBUF_PTR_CLR is performed on context switch, but, per hardware team recommendation, it is also working without context switch, which is the case for this driver, for now. Without soft reset and without BITBUF_PTR_CLR, successive encoding jobs continue from where the previous left off, basically writing past the v4l2 buffer. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Robert Chiras <robert.chiras@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: imx-jpeg: Fix occasional decoder fail on jpegs without DHTMirela Rabulea
Add some body to the dummy jpeg used to inject a default DHT. Use jpeg_image_red as compressed image data, insert it at the end of SOS, before EOI. The pure dummy jpeg was occasionally not working well on 8qxp C0. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: imx-jpeg: Fix possible null pointer dereferenceMirela Rabulea
Found by Coverity scan. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08Merge tag 'amd-drm-fixes-5.15-2021-10-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-06: amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com
2021-10-08Merge tag 'drm-misc-fixes-2021-10-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Rebased drm-misc-fixes for v5.15-rc5: - Dropped vc4 patches. - Compiler fix for vc4. - Cursor fix for nouveau. - Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support. - Small rockchip fixes. - Fix DT bindings indent for ili9341. - Fix y030xx067a init sequence to not get a yellow tint. - Kconfig fix for fb_simple vs simpledrm. - Assorted nouvaeu memory leaks. - Fix gbefb when built with COMPILE_TEST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3272bf72-2c37-31eb-404e-cf7edd485c7d@linux.intel.com
2021-10-07Merge tag 'armsoc-fixes-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a larger than normal update for Arm SoC specific code, most of it in device trees, but also drivers and the omap and at91/sama7 platforms: - There are four new entries to the MAINTAINERS file: Sven Peter and Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar, and Vignesh Raghavendra for TI K3 - Build fixes to address randconfig warnings in sharpsl, dove, omap1, and qcom platforms as well as the scmi and op-tee subsystems - Regression fixes for missing CONFIG_FB and other options for several defconfigs - Several bug fixes for the newly added Microchip SAMA7 platform, mostly regarding power management - Missing SMP barriers to protect accesses to SCMI virtio device - Regression fixes for TI OMAP, including a boot-time hang on am335x. - Lots of bug fixes for NXP i.MX, mostly addressing incorrect settings in devicetree files, and one revert for broken suspend. - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple of schema warnings. - Regression fixes for qualcomm SoC specific drivers and devicetree files, reverting an mdt_loader change and at least pastially reverting some of the 5.15 DTS changes, plus some minor bugfixes" * tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits) MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer firmware: arm_scmi: Add proper barriers to scmi virtio device firmware: arm_scmi: Simplify spinlocks in virtio transport ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 ARM: sharpsl_param: work around -Wstringop-overread warning ARM: defconfig: gemini: Restore framebuffer ARM: dove: mark 'putc' as inline ARM: omap1: move omap15xx local bus handling to usb.c MAINTAINERS: Add Vignesh to TI K3 platform maintainership arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence arm64: dts: ls1028a: fix eSDHC2 node arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail ...
2021-10-07Merge tag 'scmi-fixes-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes SCMI fixes for v5.15 A few fixes addressing: - Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL - Link-time error with __exit annotation for virtio_scmi_exit - Unnecessary nested irqsave/irqrestore spinlocks in virtio transport - Missing SMP barriers to protect accesses to SCMI virtio device * tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Add proper barriers to scmi virtio device firmware: arm_scmi: Simplify spinlocks in virtio transport firmware: arm_scmi: Remove __exit annotation firmware: arm_scmi: Fix virtio transport Kconfig dependency Link: https://lore.kernel.org/r/20211007102822.27886-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-07Merge tag 'omap-for-v5.15/fixes-rc4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.15 Few regression fixes for omaps for the v5.15-rc cycle. There is a fix for boot time hangs that can happen on some am335x devices that started when the pruss devicetree nodes were added. The other fixes are less critical: - Fix compiler warning for sysc_init_soc() that got recently introduced - Fix external abort for am335x pruss as otherwise some am335x will hang - Use CLKDM_NOAUTO quirk also for dra7 dcan1 - Fix older NAND device node regression for omap3-sdp * tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 soc: ti: omap-prm: Fix external abort for am335x pruss bus: ti-sysc: Add break in switch statement in sysc_init_soc() Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-07EDAC/ti: Remove redundant error messagesTang Bin
In the function ti_edac_probe(), devm_ioremap_resource() and platform_get_irq() already issue error messages when they fail so remove the redundant error messages in the EDAC driver. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210811112626.27848-1-tangbin@cmss.chinamobile.com
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-07Merge tag 'hyperv-fixes-signed-20211007' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Replace uuid.h with types.h in a header (Andy Shevchenko) - Avoid sleeping in atomic context in PCI driver (Long Li) - Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov) * tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Avoid erroneously sending IPI to 'self' hyper-v: Replace uuid.h with types.h PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
2021-10-07PCI: ACPI: Check parent pointer in acpi_pci_find_companion()Rafael J. Wysocki
If acpi_pci_find_companion() is called for a device whose parent pointer is NULL, it will crash when attempting to get the ACPI companion of the parent due to a NULL pointer dereference in the ACPI_COMPANION() macro. This was not a problem before commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") that made pci_setup_device() call pci_set_acpi_fwnode() and so it allowed devices with NULL parent pointers to be passed to acpi_pci_find_companion() which is the case in pci_iov_add_virtfn(), for instance. Fix this issue by making acpi_pci_find_companion() check the device's parent pointer upfront and bail out if it is NULL. While pci_iov_add_virtfn() can be changed to set the device's parent pointer before calling pci_setup_device() for it, checking pointers against NULL before dereferencing them is prudent anyway and looking for ACPI companions of virtual functions isn't really useful. Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") Link: https://lore.kernel.org/linux-acpi/8e4bbd5c59de31db71f718556654c0aa077df03d.camel@linux.ibm.com/ Reported-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-07nvme-pci: Fix abort command idKeith Busch
The request tag is no longer the only component of the command id. Fixes: e7006de6c2380 ("nvme: code command_id with a genctr for use-after-free validation") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-07firmware: include drivers/firmware/Kconfig unconditionallyArnd Bergmann
Compile-testing drivers that require access to a firmware layer fails when that firmware symbol is unavailable. This happened twice this week: - My proposed to change to rework the QCOM_SCM firmware symbol broke on ppc64 and others. - The cs_dsp firmware patch added device specific firmware loader into drivers/firmware, which broke on the same set of architectures. We should probably do the same thing for other subsystems as well, but fix this one first as this is a dependency for other patches getting merged. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Simon Trimmer <simont@opensource.cirrus.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-07USB: serial: qcserial: add EM9191 QDL supportAleksander Morgado
When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-10-07EDAC/amd64: Handle three rank interleaving modeYazen Ghannam
AMD Rome systems and later support interleaving between three identical ranks within a channel. Check for this mode by counting the number of enabled chip selects and comparing their masks. If there are exactly three enabled chip selects and their masks are identical, then three rank interleaving is enabled. The size of a rank is determined from its mask value. However, three rank interleaving doesn't follow the method of swapping an interleave bit with the most significant bit. Rather, the interleave bit is flipped and the most significant bit remains the same. There is only a single interleave bit in this case. Account for this when determining the chip select size by keeping the most significant bit at its original value and ignoring any zero bits. This will return a full bitmask in [MSB:1]. Fixes: e53a3b267fb0 ("EDAC/amd64: Find Chip Select memory size using Address Mask") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211005154419.2060504-1-yazen.ghannam@amd.com
2021-10-07EDAC/mc_sysfs: Print MC-scope sysfs counters unsignedEric Badger
This is cosmetically nicer for counts > INT32_MAX, and aligns the MC-scope format with that of the lower layer sysfs counter files. Signed-off-by: Eric Badger <ebadger@purestorage.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20211003181653.GA685515@ebadger-ThinkPad-T590
2021-10-07USB: serial: option: add Quectel EC200S-CN module supportYu-Tung Chang
Add usb product id of the Quectel EC200S-CN module. usb-devices output for 0x6002: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6002 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-10-07USB: serial: option: add prod. id for Quectel EG91Tomaz Solc
Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-10-07USB: serial: option: add Telit LE910Cx composition 0x1204Daniele Palmas
Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-10-06thunderbolt: build kunit tests without structleak pluginBrendan Higgins
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: drivers/thunderbolt/test.c:1529:1: error: the frame size of 1176 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Turn it off in this file. Linus already split up tests in this file, so this change *should* be redundant now. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-06device property: build kunit tests without structleak pluginBrendan Higgins
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: ../drivers/base/test/property-entry-test.c:492:1: warning: the frame size of 2832 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:322:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:250:1: warning: the frame size of 4976 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:115:1: warning: the frame size of 3280 bytes is larger than 2048 bytes [-Wframe-larger-than=] Turn it off in this file. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-06iio/test-format: build kunit tests without structleak pluginBrendan Higgins
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: ../drivers/iio/test/iio-test-format.c: In function ‘iio_test_iio_format_value_fixedpoint’: ../drivers/iio/test/iio-test-format.c:98:1: warning: the frame size of 2336 bytes is larger than 2048 bytes [-Wframe-larger-than=] Turn it off in this file. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-06drm/amd/display: Fix detection of 4 lane for DPALTHansen
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-06drm/amd/display: Limit display scaling to up to 4k for DCN 3.1Nikola Cornij
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-06drm/amd/display: Skip override for preferred link settings during link trainingGeorge Shen
[Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06RDMA/mlx5: Set user priority for DCTPatrisious Haddad
Currently, the driver doesn't set the PCP-based priority for DCT, hence DCT response packets are transmitted without user priority. Fix it by setting user provided priority in the eth_prio field in the DCT context, which in turn sets the value in the transmitted packet. Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP") Link: https://lore.kernel.org/r/5fd2d94a13f5742d8803c218927322257d53205c.1633512672.git.leonro@nvidia.com Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-06RDMA/irdma: Process extended CQ entries correctlyShiraz Saleem
The valid bit for extended CQE's written by HW is retrieved from the incorrect quad-word. This leads to missed completions for any UD traffic particularly after a wrap-around. Get the valid bit for extended CQE's from the correct quad-word in the descriptor. Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries") Link: https://lore.kernel.org/r/20211005182302.374-1-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-06iavf: fix double unlock of crit_lockStefan Assmann
The crit_lock mutex could be unlocked twice as reported here https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20210823/025525.html Remove the superfluous unlock. Technically the problem was already present before 5ac49f3c2702 as that commit only replaced the locking primitive, but no functional change. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Fixes: bac8486116b0 ("iavf: Refactor the watchdog state machine") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-06i40e: Fix freeing of uninitialized misc IRQ vectorSylwester Dziedziuch
When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized. Fixes: c17401a1dd21 ("i40e: use separate state bit for miscellaneous IRQ setup") Reported-by: PJ Waskiewicz <pwaskiewicz@jumptrading.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-06i40e: fix endless loop under rtnlJiri Benc
The loop in i40e_get_capabilities can never end. The problem is that although i40e_aq_discover_capabilities returns with an error if there's a firmware problem, the returned error is not checked. There is a check for pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most firmware problems. When i40e_aq_discover_capabilities encounters a firmware problem, it will encounter the same problem on its next invocation. As the result, the loop becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking at the code, it can happen with a range of other firmware errors. I don't know what the correct behavior should be: whether the firmware should be retried a few times, or whether pf->hw.aq.asq_last_status should be always set to the encountered firmware error (but then it would be pointless and can be just replaced by the i40e_aq_discover_capabilities return value). However, the current behavior with an endless loop under the rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we explained the bug to them 7 months ago. This may not be the best possible fix but it's better than hanging the whole system on a firmware bug. Fixes: 56a62fc86895 ("i40e: init code and hardware support") Tested-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-06mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirkNeil Armstrong
The memory at the end of the controller only accepts 32bit read/write accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit (which will be split into two 32bit access) and 8bit leading to incomplete copies to/from this memory when the buffer is not multiple of 8bytes. Add a local copy using writel/readl accesses to make sure we use the right memory access width. The switch to memcpy_to/fromio was done because of 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy worked before since it mainly used 32bit memory acceses. Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210928073652.434690-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06mmc: sdhci-of-at91: replace while loop with read_poll_timeoutClaudiu Beznea
Replace while loop with read_poll_timeout(). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210924082851.2132068-3-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06mmc: sdhci-of-at91: wait for calibration done before proceedClaudiu Beznea
Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN bit will be cleared. No commands should be send before calibration is done. Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten") Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210924082851.2132068-2-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06ionic: move filter sync_needed bit setShannon Nelson
Move the setting of the filter-sync-needed bit to the error case in the filter add routine to be sure we're checking the live filter status rather than a copy of the pre-sync status. Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gve: report 64bit tx_bytes counter from gve_handle_report_stats()Eric Dumazet
Each tx queue maintains a 64bit counter for bytes, there is no reason to truncate this to 32bit (or this has not been documented) Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yangchun Fu <yangchun@google.com> Cc: Kuo Zhao <kuozhao@google.com> Cc: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gve: fix gve_get_stats()Eric Dumazet
gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry() returns true. What is needed here is to sample values in temporary variables, and only use them after each loop is ended. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Catherine Sullivan <csully@google.com> Cc: Sagi Shahar <sagis@google.com> Cc: Jon Olson <jonolson@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Luigi Rizzo <lrizzo@google.com> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Tao Liu <xliutaox@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gve: Properly handle errors in gve_assign_qplCatherine Sullivan
Ignored errors would result in crash. Fixes: ede3fcf5ec67f ("gve: Add support for raw addressing to the rx path") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gve: Avoid freeing NULL pointerTao Liu
Prevent possible crashes when cleaning up after unsuccessful initializations. Fixes: 893ce44df5658 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Tao Liu <xliutaox@google.com> Signed-off-by: Catherine Sully <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gve: Correct available tx qpl checkCatherine Sullivan
The qpl_map_size is rounded up to a multiple of sizeof(long), but the number of qpls doesn't have to be. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gpio: mockup: Convert to use software nodesAndy Shevchenko
The gpio-mockup driver creates the properties that are shared between platform and GPIO devices. Because of that, the properties may not be removed at the proper point of time without provoking a use-after-free as shown in the following backtrace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120 ... Call Trace: kobject_put+0xdc/0xf0 software_node_notify_remove+0xa8/0xc0 device_del+0x15a/0x3e0 That's why the driver has to manage the lifetime of the software nodes by itself. The problem originates from the old device_add_properties() API, but has been only revealed after the commit bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()"). Hence, it's used as a landmark for backporting. Fixes: bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()") Reported-by: Kent Gibson <warthog618@gmail.com> Tested-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Bartosz: tweaked local variable placement] Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-06gpio: pca953x: Improve bias settingAndy Shevchenko
The commit 15add06841a3 ("gpio: pca953x: add ->set_config implementation") introduced support for bias setting. However this, due to being half-baked, brought potential issues: - the turning bias via disabling makes the pin floating for a while; - once enabled, bias can't be disabled. Fix all these by adding support for bias disabling and move the disabling part under the corresponding conditional. While at it, add support for default setting, since it's cheap to add. Fixes: 15add06841a3 ("gpio: pca953x: add ->set_config implementation") Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
generated by cgit (git 2.34.1) at 2025-09-30 20:26:58 +0000