summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-15wifi: ath12k: fix conf_mutex in ath12k_mac_op_unassign_vif_chanctx()Wen Gong
"mutex_unlock(&ar->conf_mutex);" is always called at end of function ath12k_mac_op_unassign_vif_chanctx(), so delete this unlock to make sure lock/unlock is paired. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230608104444.3134-1-quic_wgong@quicinc.com
2023-06-15ata: ahci_platform: Make code agnostic to OF/ACPIAndy Shevchenko
With the help of a new device_is_compatible() make the driver code agnostic to the OF/ACPI. This makes it neater. As a side effect the header inclusions is corrected (seems mod_devicetable.h was implicitly included). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Message-ID: <20230609154900.43024-4-andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15spi: stm32: introduction of stm32h7 SPI device mode supportValentin Caron
Add support for stm32h7 to use SPI controller in device role. In such case, the spi instance should have the spi-slave property defined. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230615075815.310261-5-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-15spi: stm32: use dmaengine_terminate_{a}sync instead of _allAlain Volmat
Avoid usage of deprecated dmaengine_terminate_all and use dmaengine_terminate_sync and dmaengine_terminate_async instead. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230615075815.310261-3-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-15spi: stm32: renaming of spi_master into spi_controllerAlain Volmat
Preparing introduction of SPI device, rename the spi_master structure into spi_controller. This doesn't have any functional impact since spi_master was already a macro for spi_controller. Referring now to ctrl instead of master since the spi_controller structure might not be used as a master controller only. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230615075815.310261-2-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-15Merge tag 'counter-updates-for-6.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
2023-06-15Merge tag 'fpga-for-6.5-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.5-rc1 DFL: - Krzysztof's change constifies pointers to hwmon_channel_info Xilinx: - Alfonso's change ensures proper reprograming (xCAP) interface switch All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-next branch). Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: zynq-fpga: Ensure proper xCAP interface switch fpga: dfl-fme: constify pointers to hwmon_channel_info
2023-06-15Merge tag 'iio-for-6.5a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
2023-06-15Merge tag 'iio-fixes-for-6.4b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of IIO fixes for the 6.4 cycle. Given how late this pull request is, I'm expecting these to get queued up for the 6.5 merge window. - adi,ad7192 * Fix a null pointer as spi_set_drvdata() is no longer called. * Fix wrong check prior to using internal clock. * Fix dt-binding to make it clear the voltage reference is required. - adi,ad74413 * DIN_SINK should not be set for functions other than digital inputs. Enforce that in the driver. - amlogic,meson-saradc * Fix clock divider mask length - affects only meson 8 family. - freescale,fxls8962af * Fix endian type and shift of channels to match with default device setup. * Narrow errata handling to FXLS8962AF only as doesn't affect other devices supported by this driver. * tag 'iio-fixes-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: meson saradc: fix clock divider mask length iio: accel: fxls8962af: errata bug only applicable for FXLS8962AF iio: accel: fxls8962af: fixup buffer scan element type dt-bindings: iio: ad7192: Add mandatory reference voltage source iio: adc: ad7192: Fix internal/external clock selection iio: adc: ad7192: Fix null ad7192_state pointer access iio: addac: ad74413: don't set DIN_SINK for functions other than digital input
2023-06-15staging: rtl8192e: Use standard api to calculate channel to frequencyPhilipp Hortmann
Use ieee80211_channel_to_freq_khz() to calculate channel to frequency to omit proprietary code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Message-ID: <c3a94a403d04ba810cffff8afa734a94a218a4e9.1686166624.git.philipp.g.hortmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15staging: rtl8192e: Use standard api to calculate frequency to channelPhilipp Hortmann
Use ieee80211_freq_khz_to_channel() to calculate frequency to channel to omit proprietary code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Message-ID: <fc332e81f6677965e9e51f1fcef9815997effcb5.1686166624.git.philipp.g.hortmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15leds: trigger: netdev: uninitialized variable in netdev_trig_activate()Dan Carpenter
The qca8k_cled_hw_control_get() function which implements ->hw_control_get sets the appropriate bits but does not clear them. This leads to an uninitialized variable bug. Fix this by setting mode to zero at the start. Fixes: e0256648c831 ("net: dsa: qca8k: implement hw_control ops") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15staging: rtl8192e: Add cfg80211.h and remove defined variablesPhilipp Hortmann
Add cfg80211 and remove defined variables rfc1042_header and bridge_tunnel_header as they are then already defined. Usage of cfg80211 is required to merge driver into wireless subsystem. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Message-ID: <20230603085251.GA20230@matrix-ESPRIMO-P710> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15staging: rtl8192e: remove blank linesMichael Straube
Remove unnecessary blank lines reported by checkpatch. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Message-ID: <20230531053118.17053-1-straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15Staging: rts5208: rtsx: Removed new line in else and else ifDeepanshu Kartikey
Removed new line in else and else if, this warning was given by checkpatch.pl Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Message-ID: <20230530135120.37637-1-kartikey406@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15sfc: fix XDP queues mode with legacy IRQÍñigo Huguet
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not changed to a proper default value. This was leading to the driver thinking that it has dedicated XDP queues, when it didn't. Fix it by setting xdp_txq_queues_mode to the correct value if the driver fallbacks to MSI or legacy IRQ mode. The correct value is EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues. The issue can be easily visible if the kernel is started with pci=nomsi, then a call trace is shown. It is not shown only with sfc's modparam interrupt_mode=2. Call trace example: WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc] [...skip...] Call Trace: <TASK> efx_set_channels+0x5c/0xc0 [sfc] efx_probe_nic+0x9b/0x15a [sfc] efx_probe_all+0x10/0x1a2 [sfc] efx_pci_probe_main+0x12/0x156 [sfc] efx_pci_probe_post_io+0x18/0x103 [sfc] efx_pci_probe.cold+0x154/0x257 [sfc] local_pci_probe+0x42/0x80 Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15usb: typec: add support for the nb7vpq904m Type-C Linear RedriverDmitry Baryshkov
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed and DisplayPort ALT Mode Linear Redriver chip found on some devices with a Type-C port. The redriver compensates ultra High-Speeed DisplayPort and USB Super Speed signal integrity losses mainly due to PCB & transmission cables. The redriver doesn't support SuperSpeed lines swapping, but can support Type-C SBU lines swapping. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Message-ID: <20230601-topic-sm8x50-upstream-redriver-v4-2-91d5820f3a03@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15net: macsec: fix double free of percpu statsFedor Pchelkin
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15clk: meson: pll: remove unneeded semicolonJiapeng Chong
No functional modification involved. ./drivers/clk/meson/clk-pll.c:373:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230614084808.98819-1-jiapeng.chong@linux.alibaba.com Fixes: b6ec400aa153 ("clk: meson: introduce new pll power-on sequence for A1 SoC family") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-06-15tty: fix hang on tty device with no_room setHui Li
It is possible to hang pty devices in this case, the reader was blocking at epoll on master side, the writer was sleeping at wait_woken inside n_tty_write on slave side, and the write buffer on tty_port was full, we found that the reader and writer would never be woken again and blocked forever. The problem was caused by a race between reader and kworker: n_tty_read(reader): n_tty_receive_buf_common(kworker): copy_from_read_buf()| |room = N_TTY_BUF_SIZE - (ldata->read_head - tail) |room <= 0 n_tty_kick_worker() | |ldata->no_room = true After writing to slave device, writer wakes up kworker to flush data on tty_port to reader, and the kworker finds that reader has no room to store data so room <= 0 is met. At this moment, reader consumes all the data on reader buffer and calls n_tty_kick_worker to check ldata->no_room which is false and reader quits reading. Then kworker sets ldata->no_room=true and quits too. If write buffer is not full, writer will wake kworker to flush data again after following writes, but if write buffer is full and writer goes to sleep, kworker will never be woken again and tty device is blocked. This problem can be solved with a check for read buffer size inside n_tty_receive_buf_common, if read buffer is empty and ldata->no_room is true, a call to n_tty_kick_worker is necessary to keep flushing data to reader. Cc: <stable@vger.kernel.org> Fixes: 42458f41d08f ("n_tty: Ensure reader restarts worker for next reader") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Hui Li <caelli@tencent.com> Message-ID: <1680749090-14106-1-git-send-email-caelli@tencent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15serial: core: fix -EPROBE_DEFER handling in initDan Carpenter
The -EPROBE_DEFER error path in serial_base_device_init() is a bit awkward. Before the call to device_initialize(dev) then we need to manually release all the device resources. And after the call then we need to call put_device() to release the resources. Doing either one wrong will result in a leak or a use after free. So let's wait to return -EPROBE_DEFER until after the call to device_initialize(dev) so that way callers do not have to handle -EPROBE_DEFER as a special case. Now callers can just use put_device() for clean up. The second issue with the -EPROBE_DEFER path is that deferring is not supposed to be a fatal error, but instead it's normal part of the init process and the kernel recovers from it automatically. That means we should not print an error message but just a debug message on this path. Fixes: 539914240a01 ("serial: core: Fix probing serial_base_bus devices") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Message-ID: <18318adb-ab2c-4dcc-9f96-498a13d16b80@moroto.mountain> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15serial: 8250_omap: Use force_suspend and resume for system suspendTony Lindgren
We should not rely on autosuspend timeout for system suspend. Instead, let's use force_suspend and force_resume functions. Otherwise the serial port controller device may not be idled on suspend. As we are doing a register write on suspend to configure the serial port, we still need to runtime PM resume the port on suspend. While at it, let's switch to pm_runtime_resume_and_get() and check for errors returned. And let's add the missing line break before return to the suspend function while at it. Fixes: 09d8b2bdbc5c ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Dhruva Gole <d-gole@ti.com> Message-ID: <20230614045922.4798-1-tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15drm/msm/dp: Free resources after unregistering themBjorn Andersson
The DP component's unbind operation walks through the submodules to unregister and clean things up. But if the unbind happens because the DP controller itself is being removed, all the memory for those submodules has just been freed. Change the order of these operations to avoid the many use-after-free that otherwise happens in this code path. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542166/ Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dp: Drop aux devices together with DP controllerBjorn Andersson
Using devres to depopulate the aux bus made sure that upon a probe deferral the EDP panel device would be destroyed and recreated upon next attempt. But the struct device which the devres is tied to is the DPUs (drm_dev->dev), which may be happen after the DP controller is torn down. Indications of this can be seen in the commonly seen EDID-hexdump full of zeros in the log, or the occasional/rare KASAN fault where the panel's attempt to read the EDID information causes a use after free on DP resources. It's tempting to move the devres to the DP controller's struct device, but the resources used by the device(s) on the aux bus are explicitly torn down in the error path. The KASAN-reported use-after-free also remains, as the DP aux "module" explicitly frees its devres-allocated memory in this code path. As such, explicitly depopulate the aux bus in the error path, and in the component unbind path, to avoid these issues. Fixes: 2b57f726611e ("drm/msm/dp: fix aux-bus EP lifetime") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/542163/ Link: https://lore.kernel.org/r/20230612220106.1884039-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm: provide fb_dirty implemenationDmitry Baryshkov
Since commit 93e81e38e197 ("drm/fb_helper: Minimize damage-helper overhead") the drm_fb_helper_funcs::fb_dirty helper is required for proper dirty/damage processing. The drm/msm driver requires that to function to let CMD panels to work. Use simplified version of drm_fbdev_generic_helper_fb_dirty() to fix support for CMD mode panels. Reported-by: Degdag Mohamed <degdagmohamed@gmail.com> Fixes: 93e81e38e197 ("drm/fb_helper: Minimize damage-helper overhead") Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/542002/ Link: https://lore.kernel.org/r/20230612031616.3620134-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: Remove incorrect references to slice_countJessica Zhang
Currently, slice_count is being used to calculate word count and pkt_per_line. Instead, these values should be calculated using slice per packet, which is not the same as slice_count. Slice count represents the number of slices per interface, and its value will not always match that of slice per packet. For example, it is possible to have cases where there are multiple slices per interface but the panel specifies only one slice per packet. Thus, use the default value of one slice per packet and remove slice_count from the aforementioned calculations. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Fixes: bc6b6ff8135c ("drm/msm/dsi: Use DSC slice(s) packet size to compute word count") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541965/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-5-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Set DATA_COMPRESS on command mode for DCE/DSC 1.2Jessica Zhang
Add a DPU INTF op to set the DCE_DATA_COMPRESS bit to enable the DCE/DSC 1.2 datapath Note: For now, this op is called for command mode encoders only. Changes to set DATA_COMPRESS for video mode encoders will be posted along with DSC v1.2 support for DP. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/541966/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-4-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag for DPU >= 7.0Jessica Zhang
In DPU 7.x and later, DSC/DCE enablement registers have been moved from PINGPONG to INTF. Thus, add a DPU_INTF_DATA_COMPRESS feature flag that will be set if the DATA_COMPRESS register is in the INTF block. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541967/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-3-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: Reduce pclk rate for compressionJessica Zhang
Adjust the pclk rate to divide hdisplay by the compression ratio when DSC is enabled. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541972/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-2-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15msm/drm/dsi: Round up DSC hdisplay calculationJessica Zhang
Currently, when compression is enabled, hdisplay is reduced via integer division. This causes issues for modes where the original hdisplay is not a multiple of 3. To fix this, use DIV_ROUND_UP to divide hdisplay. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Fixes: 08802f515c3cf ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541970/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-1-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsetsAbhinav Kumar
Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and feature flag information. Each display compression engine (DCE) contains dual DSC encoders so both share same base address but with its own different sub block address. changes in v4: -- delete DPU_DSC_HW_REV_1_1 -- re arrange sc8280xp_dsc[] changes in v4: -- fix checkpatch warning changes in v10: -- remove hard slice from commit text -- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN -- change DSC_BLK_1_2 .len from 0x100 to 0x29c changes in v11: -- remove comment at DSC_BLK_1_2 marco Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/539507/ Link: https://lore.kernel.org/r/1685036458-22683-10-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: add support for DSC encoder v1.2 engineKuogee Hsieh
Add support for DSC 1.2 by providing the necessary hooks to program the DPU DSC 1.2 encoder. Changes in v3: -- fixed kernel test rebot report that "__iomem *off" is declared but not used at dpu_hw_dsc_config_1_2() -- unrolling thresh loops Changes in v4: -- delete DPU_DSC_HW_REV_1_1 -- delete off and used real register name directly Changes in v7: -- replace offset with sblk->enc.base -- replace ss with slice Changes in v8: -- fixed checkpatch warning Changes in v9: -- replaced __dsc_calc_ob_max_addr() with __dsc_calc_output_buf_max_addr() -- replaced variable num_ss with num_softslice -- remove inline from function declaration changes in v10: -- rewording text of changes in v9 -- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN -- replace drm_dsc_calculate_flatness_det_thresh() with drm_dsc_flatness_det_thresh() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/539500/ Link: https://lore.kernel.org/r/1685036458-22683-7-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: update hdisplay calculation for dsi_timing_setupJessica Zhang
Currently, hdisplay is being divided by 3 for DSC. However, this calculation only works for cases where BPP = 8. Update hdisplay calculation to be bytes_per_line / 3, so that it accounts for cases where BPP != 8. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539271/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-9-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: Use MSM and DRM DSC helper methodsJessica Zhang
Use MSM and DRM DSC helper methods to configure DSC for DSI. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539274/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-8-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Fix slice_last_group_size calculationJessica Zhang
Correct the math for slice_last_group_size so that it matches the calculations downstream. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539269/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-7-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatnessJessica Zhang
The current dpu_hw_dsc calculation for det_thresh_flatness does not match the downstream calculation or the DSC spec. Use the DRM DSC helper for det_thresh_flatness to match downstream implementation and the DSC spec. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539275/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-6-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm: Add MSM-specific DSC helper methodsJessica Zhang
Introduce MSM-specific DSC helper methods, as some calculations are common between DP and DSC. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539272/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-5-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: use DRM DSC helpers for DSC setupDmitry Baryshkov
Use new DRM DSC helpers to setup DSI DSC configuration. The initial_scale_value needs to be adjusted according to the standard, but this is a separate change. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539276/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-4-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/display/dsc: Add drm_dsc_get_bpp_int helperJessica Zhang
Add helper to get the integer value of drm_dsc_config.bits_per_pixel Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539268/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-3-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/display/dsc: add helper to set semi-const parametersDmitry Baryshkov
Add a helper setting config values which are typically constant across operating modes (table E-4 of the standard) and mux_word_size (which is a const according to 3.5.2). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539280/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-2-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/display/dsc: Add flatness and initial scale value calculationsJessica Zhang
Add helpers to calculate det_thresh_flatness and initial_scale_value as these calculations are defined within the DSC spec. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539282/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-1-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu/catalog: define DSPP blocks found on sdm845Dmitry Baryshkov
Add definitions of DSPP blocks present on the sdm845 platform. This should enable color-management on sdm845-bassed devices. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542142/ Link: https://lore.kernel.org/r/20230612182534.3345805-2-dmitry.baryshkov@linaro.org
2023-06-15drm/msm/dpu: do not enable color-management if DSPPs are not availableDmitry Baryshkov
We can not support color management without DSPP blocks being provided in the HW catalog. Do not enable color management for CRTCs if num_dspps is 0. Fixes: 4259ff7ae509 ("drm/msm/dpu: add support for pcc color block in dpu driver") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Tested-by: Yongqin Liu <yongqin.liu@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542141/ Link: https://lore.kernel.org/r/20230612182534.3345805-1-dmitry.baryshkov@linaro.org
2023-06-15drm/msm/adreno: make adreno_is_a690()'s argument constDmitry Baryshkov
Change adreno_is_a690() prototype to accept the const struct adreno_gpu pointer instead of a non-const one. This fixes the following warning: In file included from drivers/gpu/drm/msm/msm_drv.c:33: drivers/gpu/drm/msm/adreno/adreno_gpu.h: In function ‘adreno_is_a660_family’: drivers/gpu/drm/msm/adreno/adreno_gpu.h:303:54: warning: passing argument 1 of ‘adreno_is_a690’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 303 | return adreno_is_a660(gpu) || adreno_is_a690(gpu) || adreno_is_7c3(gpu); Fixes: 1b90e8f8879c ("drm/msm/adreno: change adreno_is_* functions to accept const argument") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/542138/ Link: https://lore.kernel.org/r/20230612182527.3345786-1-dmitry.baryshkov@linaro.org
2023-06-15Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial ↵Greg Kroah-Hartman
detection" This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K <quic_prashk@quicinc.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15mfd: intel-lpss: Add missing check for platform_get_resourceJiasheng Jiang
Add the missing check for platform_get_resource and return error if it fails. Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230609014818.28475-1-jiasheng@iscas.ac.cn
2023-06-15mfd: stpmic1: Add PMIC poweroff via sys-off handlerSean Nyekjaer
Use devm_register_sys_off_handler() that allows to register multiple power-off handlers. This will allow boards using the stpmic1 to power-off. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230602062426.3947116-2-sean@geanix.com
2023-06-15mfd: stpmic1: Fixup main control register and bits namingSean Nyekjaer
Fixup main control register and bits naming so the match the naming from the datasheet. https://www.st.com/resource/en/datasheet/stpmic1.pdf Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230602062426.3947116-1-sean@geanix.com
2023-06-15mfd: tps65219: Add support for soft shutdown via sys-off APIJerome Neanne
Use new API for power-off mode support: Link: https://lwn.net/Articles/894511/ Link: https://lore.kernel.org/all/7hfseqa7l0.fsf@baylibre.com/ sys-off API allows support of shutdown handler and restart handler. Shutdown was not supported before that enhancement. This is required for platform that are not using PSCI. Test: - restart: # reboot Default is cold reset: # cat /sys/kernel/reboot/mode Switch boot mode to warm reset: # echo warm > /sys/kernel/reboot/mode - power-off: # halt Tested on AM62-LP-SK board. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Suggested-by: Andrew Davis <afd@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230608071947.3467751-1-jneanne@baylibre.com
2023-06-15mfd: pm8008: Drop bogus i2c module aliasJohan Hovold
Prior to commit af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") drivers using OF matching needed an i2c module alias such as "i2c:pm8008" for module autoloading to work. Drop the bogus i2c alias from the pm8008 driver which was merged long after i2c core was fixed and whose alias did not match the driver name ("pm8008") to begin with. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230526091646.17318-3-johan+linaro@kernel.org
generated by cgit (git 2.34.1) at 2025-09-26 03:20:50 +0000