summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-15mfd: pm8008: Fix module autoloadingJohan Hovold
Add the missing module device table alias to that the driver can be autoloaded when built as a module. Cc: stable@vger.kernel.org # 5.14 Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230526091646.17318-2-johan+linaro@kernel.org
2023-06-15mfd: tps65219: Add GPIO cell instanceJerome Neanne
TPS65219 PMIC GPIOs are exposed in a standard way: gpiodetect gpiochip0 [tps65219-gpio] (3 lines) tps65219-gpios is incorrect cell name (plural). Changed to tps65219-gpio (singular) Co-developed-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230511-tps65219-add-gpio-support-v5-2-ebb94281c854@baylibre.com
2023-06-15mfd: tps6594: Fix an error code in probe()Dan Carpenter
These error paths accidentally return success when they should return -EINVAL. Fixes: 325bec7157b3 ("mfd: tps6594: Add driver for TI TPS6594 PMIC") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/49f7cd8f-f7eb-40f1-91e8-291620c684df@kili.mountain Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: wcd934x: Simplify with dev_err_probe()Christophe JAILLET
Use dev_err_probe() to simplify code, save a few LoC and be consistent with error codes handling in messages. It also filters -EPROBE_DEFER that can be returned by devm_clk_get(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/73fdc6ecf619f80fad126abca11fb579d3d87f64.1684565021.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: wcd934x: Fix an error handling path in wcd934x_slim_probe()Christophe JAILLET
If devm_gpiod_get_optional() fails, some resources need to be released, as already done in the .remove() function. While at it, remove the unneeded error code from a dev_err_probe() call. It is already added in a human readable way by dev_err_probe() itself. Fixes: 6a0ee2a61a31 ("mfd: wcd934x: Replace legacy gpio interface for gpiod") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/02d8447f6d1df52cc8357aae698152e9a9be67c6.1684565021.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: intel-lpss: Hide suspend/resume functions in #ifdefArnd Bergmann
When CONFIG_PM is disabled, the prototypes for these two functions are not visible: drivers/mfd/intel-lpss.c:482:5: error: no previous prototype for 'intel_lpss_suspend' [-Werror=missing-prototypes] 482 | int intel_lpss_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~ drivers/mfd/intel-lpss.c:503:5: error: no previous prototype for 'intel_lpss_resume' [-Werror=missing-prototypes] 503 | int intel_lpss_resume(struct device *dev) Add the same #ifdef around the definition of the unused functions, which avoids the warning and slightly reduces the code size. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516202746.561111-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: axp20x: Add support for AXP192Aidan MacDonald
The AXP192 PMIC is similar to the AXP202/AXP209, but with different regulators, additional GPIOs, and a different IRQ register layout. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230511092609.76183-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: Remove redundant dev_set_drvdata() from I2C driversGuiting Shen
the i2c_set_clientdata() is the inline function which is complemented by the dev_set_drvdata() internally. Do not need to use i2c_set_clientdata() and dev_set_drvdata() at the same time. Signed-off-by: Guiting Shen <aarongt.shen@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230425024526.6443-1-aarongt.shen@gmail.com
2023-06-15mfd: dln2: Remove the unneeded include <linux/i2c.h>Christophe JAILLET
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/baf28e7f0fb57e918b76eaa92b94a2ae1a02cce0.1682318879.git.christophe.jaillet@wanadoo.fr
2023-06-15mfd: rc5t583-irq: Remove the unneeded include <linux/i2c.h>Christophe JAILLET
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it and add the needed <linux/device.h> instead, which is much more lightweight. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/128025bf5b81f5424db2202b0c8cfd9722c28aab.1682319383.git.christophe.jaillet@wanadoo.fr
2023-06-15mfd: wm831x: Use maple tree register cacheMark Brown
regmap has introduced a maple tree based register cache which makes use of this more advanced data structure which has been added to the kernel recently. Maple trees are much flatter than rbtrees, meaning that they do not grow to such depths when the register map is sparse which makes access a bit more efficient. The maple tree cache type is still a bit of a work in progress but should be effective for some devices already. The wm831x devices have a pretty sparse register map and being always on devices never do cache syncs so don't hit the major current disadvantage so they should be good candiates for using the maple tree cache. Update to do so, there should be little if any visible difference at runtime. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230419-mfd-wm831x-maple-v1-1-e03e39d7bb0b@kernel.org
2023-06-15mfd: intel-m10-bmc: Manage access to MAX 10 fw handshake registersIlpo Järvinen
On some MAX 10 cards, the BMC firmware is not available to service handshake registers during secure update erase and write phases at normal speeds. This problem affects at least hwmon driver. When the MAX 10 hwmon driver tries to read the sensor values during a secure update, the reads are slowed down (e.g., reading all D5005 sensors takes ~24s which is magnitudes worse than the normal <0.02s). Manage access to the handshake registers using a rw semaphore and a FW state variable to prevent accesses during those secure update phases and return -EBUSY instead. If handshake_sys_reg_nranges == 0, don't update bwcfw_state as it is not used. This avoids the locking cost. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Co-developed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-5-ilpo.jarvinen@linux.intel.com
2023-06-15mfd: intel-m10-bmc: Move m10bmc_sys_read() away from headerIlpo Järvinen
Move m10bmc_sys_read() out from the header to prepare it for adding more code into the function which would make it too large to be a static inline any more. While at it, replace the vague wording in function comment with more precise statements. Reviewed-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> # For hwmon Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-4-ilpo.jarvinen@linux.intel.com
2023-06-15mfd: intel-m10-bmc: Create m10bmc_sys_update_bits()Ilpo Järvinen
Wrap regmap_update_bits() with m10bmc_sys_update_bits() in order to be able to add additional checks into it. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-3-ilpo.jarvinen@linux.intel.com
2023-06-15mfd: intel-m10-bmc: Move core symbols to own namespaceIlpo Järvinen
Create INTEL_M10_BMC_CORE namespace for symbols exported by intel-m10-bmc-core. Reviewed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-2-ilpo.jarvinen@linux.intel.com
2023-06-15Merge branches 'tb-mfd-clk-input-pinctrl-power-rtc-sound-6.5', ↵Lee Jones
'ib-mfd-tps6594-core-6.5', 'ib-mfd-regulator-max5970-6.5', 'ib-mfd-regulator-6.5' and 'ib-mfd-power-6.5' into ibs-for-mfd-merged
2023-06-15net: tls: make the offload check helper take skb not socketJakub Kicinski
All callers of tls_is_sk_tx_device_offloaded() currently do an equivalent of: if (skb->sk && tls_is_skb_tx_device_offloaded(skb->sk)) Have the helper accept skb and do the skb->sk check locally. Two drivers have local static inlines with similar wrappers already. While at it change the ifdef condition to TLS_DEVICE. Only TLS_DEVICE selects SOCK_VALIDATE_XMIT, so the two are equivalent. This makes removing the duplicated IS_ENABLED() check in funeth more obviously correct. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Dimitris Michailidis <dmichail@fungible.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15net: lapbether: only support ethernet devicesEric Dumazet
It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15Coresight: Add coresight dummy driverHao Zhang
Some Coresight devices that kernel don't have permission to access or configure. For these devices, a dummy driver is needed to register them as Coresight devices. The module may also be used to define components that may not have any programming interfaces, so that paths can be created in the driver. It provides Coresight API for operations on dummy devices, such as enabling and disabling them. It also provides the Coresight dummy sink/source paths for debugging. Signed-off-by: Hao Zhang <quic_hazha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230602084149.40031-2-quic_hazha@quicinc.com
2023-06-15s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()Julian Ruess
This patch prevents the system from crashing when unloading the ISM module. How to reproduce: Attach an ISM device and execute 'rmmod ism'. Error-Log: - Trying to free already-free IRQ 0 - WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540 After calling ism_dev_exit() for each ISM device in the exit routine, pci_unregister_driver() will execute ism_remove() for each ISM device. Because ism_remove() also calls ism_dev_exit(), free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM device. This results in a crash with the error 'Trying to free already-free IRQ'. In the exit routine, it is enough to call pci_unregister_driver() because it ensures that ism_dev_exit() is called once per ISM device. Cc: <stable@vger.kernel.org> # 6.3+ Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Julian Ruess <julianr@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15wifi: rtw89: fix spelling typo of IQK debug messagesDmitry Antipov
Fix spelling typo of IQK debug messages. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614081555.91395-3-dmantipov@yandex.ru
2023-06-15wifi: rtw89: cleanup rtw89_iqk_info and related codeDmitry Antipov
Drop useless '_iqk_track()' and 'rtw8852a_iqk_track()' (they just change 'thermal_rek_en' field which is set but unused and so removed as well) functions, set but unused 'kcount' field of 'struct rtw89_iqk_info', and convert 'thermal' to local variables where appropriate (it doesn't need to have longer storage duration because it is actually used for the debugging purposes only). Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614081555.91395-2-dmantipov@yandex.ru
2023-06-15wifi: rtw89: cleanup private data structuresDmitry Antipov
Remove a bunch of unused (and set but unused) fields from 'struct rtw89_btc_wl_nhm', 'struct rtw89_dle_info', 'struct rtw89_hal' and 'struct rtw89_env_monitor_info' driver-specific data structures, adjust related bits. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614081555.91395-1-dmantipov@yandex.ru
2023-06-15wifi: mt7601u: replace strlcpy() with strscpy()Azeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since DEV_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230613003458.3538812-1-azeemshaikh38@gmail.com
2023-06-15wifi: rt2x00: fix the typo in commentsDeming Wang
Fix typo in the description of 'non-succesfull'. Signed-off-by: Deming Wang <wangdeming@inspur.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230612114612.1640-1-wangdeming@inspur.com
2023-06-15net: macb: Add support for partial store and forwardMaulik Jodhani
When the receive partial store and forward mode is activated, the receiver will only begin to forward the packet to the external AHB or AXI slave when enough packet data is stored in the packet buffer. The amount of packet data required to activate the forwarding process is programmable via watermark registers which are located at the same address as the partial store and forward enable bits. Adding support to read this rx-watermark value from device-tree, to program the watermark registers and enable partial store and forwarding. Signed-off-by: Maulik Jodhani <maulik.jodhani@xilinx.com> Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15tee: optee: Use kmemdup() to replace kmalloc + memcpyJiapeng Chong
Use kmemdup rather than duplicating its implementation. ./drivers/tee/optee/smc_abi.c:1542:12-19: WARNING opportunity for kmemdup. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5480 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2023-06-14net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo framesVladimir Oltean
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535. Plus 2 * VLAN_HLEN (4), that is up to 65543. The picos_per_byte variable is the largest when "speed" is lowest - SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000. Their product - 52434400000 - exceeds 32 bits, which is a problem, because apparently, a multiplication between two 32-bit factors is evaluated as 32-bit before being assigned to a 64-bit variable. In fact it's a problem for any MTU value larger than 5368. Cast one of the factors of the multiplication to u64 to force the multiplication to take place on 64 bits. Issue found by Coverity. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14ice: Fix ice module unloadJakub Buchocki
Clearing the interrupt scheme before PFR reset, during the removal routine, could cause the hardware errors and possibly lead to system reboot, as the PF reset can cause the interrupt to be generated. Place the call for PFR reset inside ice_deinit_dev(), wait until reset and all pending transactions are done, then call ice_clear_interrupt_scheme(). This introduces a PFR reset to multiple error paths. Additionally, remove the call for the reset from ice_load() - it will be a part of ice_unload() now. Error example: [ 75.229328] ice 0000:ca:00.1: Failed to read Tx Scheduler Tree - User Selection data from flash [ 77.571315] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 77.571418] {1}[Hardware Error]: event severity: recoverable [ 77.571459] {1}[Hardware Error]: Error 0, type: recoverable [ 77.571500] {1}[Hardware Error]: section_type: PCIe error [ 77.571540] {1}[Hardware Error]: port_type: 4, root port [ 77.571580] {1}[Hardware Error]: version: 3.0 [ 77.571615] {1}[Hardware Error]: command: 0x0547, status: 0x4010 [ 77.571661] {1}[Hardware Error]: device_id: 0000:c9:02.0 [ 77.571703] {1}[Hardware Error]: slot: 25 [ 77.571736] {1}[Hardware Error]: secondary_bus: 0xca [ 77.571773] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a [ 77.571821] {1}[Hardware Error]: class_code: 060400 [ 77.571858] {1}[Hardware Error]: bridge: secondary_status: 0x2800, control: 0x0013 [ 77.572490] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020 [ 77.572870] pcieport 0000:c9:02.0: [21] ACSViol (First) [ 77.573222] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID [ 77.573554] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010 [ 77.691273] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 77.691738] {2}[Hardware Error]: event severity: recoverable [ 77.691971] {2}[Hardware Error]: Error 0, type: recoverable [ 77.692192] {2}[Hardware Error]: section_type: PCIe error [ 77.692403] {2}[Hardware Error]: port_type: 4, root port [ 77.692616] {2}[Hardware Error]: version: 3.0 [ 77.692825] {2}[Hardware Error]: command: 0x0547, status: 0x4010 [ 77.693032] {2}[Hardware Error]: device_id: 0000:c9:02.0 [ 77.693238] {2}[Hardware Error]: slot: 25 [ 77.693440] {2}[Hardware Error]: secondary_bus: 0xca [ 77.693641] {2}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a [ 77.693853] {2}[Hardware Error]: class_code: 060400 [ 77.694054] {2}[Hardware Error]: bridge: secondary_status: 0x0800, control: 0x0013 [ 77.719115] pci 0000:ca:00.1: AER: can't recover (no error_detected callback) [ 77.719140] pcieport 0000:c9:02.0: AER: device recovery failed [ 77.719216] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020 [ 77.719390] pcieport 0000:c9:02.0: [21] ACSViol (First) [ 77.719557] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID [ 77.719723] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010 Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230612171421.21570-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-12 (igc, igb) This series contains updates to igc and igb drivers. Husaini clears Tx rings when interface is brought down for igc. Vinicius disables PTM and PCI busmaster when removing igc driver. Alex adds error check and path for NVM read error on igb. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igb: fix nvm.ops.read() error handling igc: Fix possible system crash when loading module igc: Clean the TX buffer and TX descriptor ring ==================== Link: https://lore.kernel.org/r/20230612205208.115292-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14Merge tag 'wireless-2023-06-14' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A couple of straggler fixes, mostly in the stack: - fix fragmentation for multi-link related elements - fix callback copy/paste error - fix multi-link locking - remove double-locking of wiphy mutex - transmit only on active links, not all - activate links in the correct order - don't remove links that weren't added - disable soft-IRQs for LQ lock in iwlwifi * tag 'wireless-2023-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression wifi: mac80211: fragment per STA profile correctly wifi: mac80211: Use active_links instead of valid_links in Tx wifi: cfg80211: remove links only on AP wifi: mac80211: take lock before setting vif links wifi: cfg80211: fix link del callback to call correct handler wifi: mac80211: fix link activation settings order wifi: cfg80211: fix double lock bug in reg_wdev_chan_valid() ==================== Link: https://lore.kernel.org/r/20230614075502.11765-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge tag 'amd-drm-next-6.5-2023-06-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
2023-06-14scsi: sg: fix blktrace debugfs entries leakageYu Kuai
sg_ioctl() support to enable blktrace, which will create debugfs entries "/sys/kernel/debug/block/sgx/", however, there is no guarantee that user will remove these entries through ioctl, and deleting sg device doesn't cleanup these blktrace entries. This problem can be fixed by cleanup blktrace while releasing request_queue, however, it's not a good idea to do this special handling in common layer just for sg device. Fix this problem by shutdown bltkrace in sg_device_destroy(), where the device is deleted and all the users close the device, also grab a scsi_device reference from sg_add_device() to prevent scsi_device to be freed before sg_device_destroy(); Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230610022003.2557284-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-14scsi: qla2xxx: Update version to 10.02.08.400-kNilesh Javali
Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Correct the index of arrayBikash Hazarika
Klocwork reported array 'port_dstate_str' of size 10 may use index value(s) 10..15. Add a fix to correct the index of array. Cc: stable@vger.kernel.org Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Pointer may be dereferencedShreyas Deodhar
Klocwork tool reported pointer 'rport' returned from call to function fc_bsg_to_rport() may be NULL and will be dereferenced. Add a fix to validate rport before dereferencing. Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Fix buffer overrunQuinn Tran
Klocwork warning: Buffer Overflow - Array Index Out of Bounds Driver uses fc_els_flogi to calculate size of buffer. The actual buffer is nested inside of fc_els_flogi which is smaller. Replace structure name to allow proper size calculation. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Check valid rport returned by fc_bsg_to_rport()Nilesh Javali
Klocwork reported warning of rport maybe NULL and will be dereferenced. rport returned by call to fc_bsg_to_rport() could be NULL and dereferenced. Check valid rport returned by fc_bsg_to_rport(). Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Avoid fcport pointer dereferenceNilesh Javali
Klocwork reported warning of NULL pointer may be dereferenced. The routine exits when sa_ctl is NULL and fcport is allocated after the exit call thus causing NULL fcport pointer to dereference at the time of exit. To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL. Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Fix potential NULL pointer dereferenceBikash Hazarika
Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate pointer before dereferencing the pointer. Cc: stable@vger.kernel.org Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: qla2xxx: Array index may go out of boundNilesh Javali
Klocwork reports array 'vha->host_str' of size 16 may use index value(s) 16..19. Use snprintf() instead of sprintf(). Cc: stable@vger.kernel.org Co-developed-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230607113843.37185-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback pathJustin Tee
The kernel test robot reported sparse warnings regarding incorrect type assignment for __be16 variables in bsg loopback path. Change the flagged lines to use the be16_to_cpu() and cpu_to_be16() macros appropriately. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230614175944.3577-1-justintee8345@gmail.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306110819.sDIKiGgg-lkp@intel.com/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: target: core: Fix error path in target_setup_session()Bob Pearson
In the error exits in target_setup_session(), if a branch is taken to free_sess: transport_free_session() may call to target_free_cmd_counter() and then fall through to call target_free_cmd_counter() a second time. This can, and does, sometimes cause seg faults since the data field in cmd_cnt->refcnt has been freed in the first call. Fix this problem by simply returning after the call to transport_free_session(). The second call is redundant for those cases. Fixes: 4edba7e4a8f3 ("scsi: target: Move cmd counter allocation") Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Link: https://lore.kernel.org/r/20230613144259.12890-1-rpearsonhpe@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14scsi: storvsc: Always set no_report_opcodesMichael Kelley
Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI command, so scsi_report_opcode() always fails, resulting in messages like this: hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001 The recently added support for command duration limits calls scsi_report_opcode() four times as each device comes online, which significantly increases the number of messages logged in a system with many disks. Fix the problem by always marking Hyper-V synthetic SCSI devices as not supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI command is not issued and no messages are logged. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1686343101-18930-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-14clk: mvebu: Use of_address_to_resource()Rob Herring
Replace of_get_property() and of_translate_address() calls with a single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230406010738.1269781-1-robh@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-14clk: tegra: tegra124-emc: Fix potential memory leakYuan Can
The tegra and tegra needs to be freed in the error handling path, otherwise it will be leaked. Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221209094124.71043-1-yuancan@huawei.com Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-14scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinitySagar Biradar
Fix the I/O hang that arises because of the MSIx vector not having a mapped online CPU upon receiving completion. SCSI cmds take the blk_mq route, which is setup during init. Reserved cmds fetch the vector_no from mq_map after init is complete. Before init, they have to use 0 - as per the norm. Reviewed-by: Gilbert Wu <gilbert.wu@microchip.com> Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230519230834.27436-1-sagar.biradar@microchip.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-06-15ata: pata_octeon_cf: Add missing header includeDamien Le Moal
Include the header file linux/of_address.h to avoid compilation errors triggered by of_property_read_reg() being undeclared. Fixes: d0b2461678b1 ("ata: Use of_property_read_reg() to parse "reg"") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306141702.ZaO9V2lk-lkp@intel.com/ Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-14clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()Dan Carpenter
Smatch detected this potential error pointer dereference clk_wzrd_register_divider(). If devm_clk_hw_register() fails then it sets "hw" to an error pointer and then dereferences it on the next line. Return the error directly instead. Fixes: 5a853722eb32 ("staging: clocking-wizard: Add support for dynamic reconfiguration") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/f0e39b5c-4554-41e0-80d9-54ca3fabd060@kili.mountain Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-26 10:55:01 +0000