Age | Commit message (Collapse) | Author |
|
[Why] some test apps report dp link training waring even dp
training pass. there are 4 tries of lt within
perform_link_training_with_retries. if lt pass within 4 tries,
it will NOT be reated as lt failure. for each try of lt, if lt
fails, current driver implementation prints message at warning
level. this let people think dp lt does not work properly.
[How] for 1st, 2nd and 3rd try of lt, print message at debug
level. for the 4th try of lt, print message at warning level.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.
[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Update parameters for SR watermarks for DCN314
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The rough calculation does not account for scaling. Also, make 2
segments the minimum allowed per surface to avoid potential 0 detile
with mpc/odm combine on such outputs.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The DMUB diagnostic data was not printed out correctly.
[How]
Print the DMUB diagnostic data line by line.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu does not need swiotlb.h, so stop including it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Put back the radeon_dp_work_func logic. It seems that
handling DP RX interrupts is necessary to make some
panels work. This was removed with the MST support,
but it regresses some systems so add it back. While
we are here, add the proper mutex locking.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
|
|
The fmt / size passed to atomisp_set_crop() includes padding,
so the binning check should be against 1/2 of the native rect.
of the sensor, rather then 1/2 of the active rect.
This fixes binning not being used when using e.g. 800x600 on
a 1600x1200 sensor leading to a very small field of view.
Link: https://lore.kernel.org/r/20230601145858.59652-4-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:613:4: error: variable 'num_xcd' is uninitialized when used here [-Werror,-Wuninitialized]
num_xcd, kfd->adev->gfx.num_xcc_per_xcp);
^~~~~~~
include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
^~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:597:13: note: initialize the variable 'num_xcd' to silence this warning
int num_xcd, partition_mode;
^
= 0
1 error generated.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
jpeg_v4_0_3_wait_for_idle
drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_3.c:752:4: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
ret &= ((RREG32_SOC15_OFFSET(
^~~
drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_3.c:745:10: note: initialize the variable 'ret' to silence this warning
bool ret;
^
= 0
drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_3.c:774:4: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
ret &= SOC15_WAIT_ON_RREG_OFFSET(
^~~
drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_3.c:767:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
2 errors generated.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: James Zhu <James.Zhu@amd.com>
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix below errors & warnings reported by checkpatch:
ERROR: code indent should use tabs where possible
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
ERROR: space prohibited before that '++' (ctx:WxB)
WARNING: Block comments use a trailing */ on a separate line
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
set_vga_state operation only allowed on SI generation
ASIC, retire the realted function on those ASIC which
did not do anything.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Change how DC version and hardware version is printed when driver is
loaded.
- Remove exclamation
- Add DC version and hardware version to both success and failure cases
- Add version in between appropriate filler words to make a complete
statement.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix NULL pointer issue for vga_set_state function
as not all the ASIC need this operation.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:1925:6: error: variable 'r' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (amdgpu_xcp_query_partition_mode(adev->xcp_mgr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:1931:6: note: uninitialized use occurs here
if (r)
^
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:1925:2: note: remove the 'if' if its condition is always true
if (amdgpu_xcp_query_partition_mode(adev->xcp_mgr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:1923:7: note: initialize the variable 'r' to silence this warning
int r, i, num_xcc;
^
= 0
1 error generated.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ras_poison_irq and functions. And fix the amdgpu_irq_put
call trace in jpeg_v4_0_hw_fini.
[ 50.497562] RIP: 0010:amdgpu_irq_put+0xa4/0xc0 [amdgpu]
[ 50.497619] RSP: 0018:ffffaa2400fcfcb0 EFLAGS: 00010246
[ 50.497620] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 50.497621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 50.497621] RBP: ffffaa2400fcfcd0 R08: 0000000000000000 R09: 0000000000000000
[ 50.497622] R10: 0000000000000000 R11: 0000000000000000 R12: ffff99b2105242d8
[ 50.497622] R13: 0000000000000000 R14: ffff99b210500000 R15: ffff99b210500000
[ 50.497623] FS: 0000000000000000(0000) GS:ffff99b518480000(0000) knlGS:0000000000000000
[ 50.497623] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 50.497624] CR2: 00007f9d32aa91e8 CR3: 00000001ba210000 CR4: 0000000000750ee0
[ 50.497624] PKRU: 55555554
[ 50.497625] Call Trace:
[ 50.497625] <TASK>
[ 50.497627] jpeg_v4_0_hw_fini+0x43/0xc0 [amdgpu]
[ 50.497693] jpeg_v4_0_suspend+0x13/0x30 [amdgpu]
[ 50.497751] amdgpu_device_ip_suspend_phase2+0x240/0x470 [amdgpu]
[ 50.497802] amdgpu_device_ip_suspend+0x41/0x80 [amdgpu]
[ 50.497854] amdgpu_device_pre_asic_reset+0xd9/0x4a0 [amdgpu]
[ 50.497905] amdgpu_device_gpu_recover.cold+0x548/0xcf1 [amdgpu]
[ 50.498005] amdgpu_debugfs_reset_work+0x4c/0x80 [amdgpu]
[ 50.498060] process_one_work+0x21f/0x400
[ 50.498063] worker_thread+0x200/0x3f0
[ 50.498064] ? process_one_work+0x400/0x400
[ 50.498065] kthread+0xee/0x120
[ 50.498067] ? kthread_complete_and_exit+0x20/0x20
[ 50.498068] ret_from_fork+0x22/0x30
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ras_poison_irq and functions.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Separate jpegbRAS poison consumption handling from the instance irq, and
register dedicated ras_poison_irq src and funcs for UVD_POISON.
v2:
- Separate ras irq from jpeg instance irq
- Improve the subject and code comments
v3:
- Split the patch into three parts
- Improve the code comments
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ras_poison_irq and functions. And fix the amdgpu_irq_put
call trace in vcn_v4_0_hw_fini.
[ 44.563572] RIP: 0010:amdgpu_irq_put+0xa4/0xc0 [amdgpu]
[ 44.563629] RSP: 0018:ffffb36740edfc90 EFLAGS: 00010246
[ 44.563630] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 44.563630] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 44.563631] RBP: ffffb36740edfcb0 R08: 0000000000000000 R09: 0000000000000000
[ 44.563631] R10: 0000000000000000 R11: 0000000000000000 R12: ffff954c568e2ea8
[ 44.563631] R13: 0000000000000000 R14: ffff954c568c0000 R15: ffff954c568e2ea8
[ 44.563632] FS: 0000000000000000(0000) GS:ffff954f584c0000(0000) knlGS:0000000000000000
[ 44.563632] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 44.563633] CR2: 00007f028741ba70 CR3: 000000026ca10000 CR4: 0000000000750ee0
[ 44.563633] PKRU: 55555554
[ 44.563633] Call Trace:
[ 44.563634] <TASK>
[ 44.563634] vcn_v4_0_hw_fini+0x62/0x160 [amdgpu]
[ 44.563700] vcn_v4_0_suspend+0x13/0x30 [amdgpu]
[ 44.563755] amdgpu_device_ip_suspend_phase2+0x240/0x470 [amdgpu]
[ 44.563806] amdgpu_device_ip_suspend+0x41/0x80 [amdgpu]
[ 44.563858] amdgpu_device_pre_asic_reset+0xd9/0x4a0 [amdgpu]
[ 44.563909] amdgpu_device_gpu_recover.cold+0x548/0xcf1 [amdgpu]
[ 44.564006] amdgpu_debugfs_reset_work+0x4c/0x80 [amdgpu]
[ 44.564061] process_one_work+0x21f/0x400
[ 44.564062] worker_thread+0x200/0x3f0
[ 44.564063] ? process_one_work+0x400/0x400
[ 44.564064] kthread+0xee/0x120
[ 44.564065] ? kthread_complete_and_exit+0x20/0x20
[ 44.564066] ret_from_fork+0x22/0x30
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ras_poison_irq and functions.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
with padding
Now that atomisp_get_padding() takes minimum padding requirements
on BYT/ISP2400 into account, it is possible for a resolution which
fits in the active area of the sensor to not fit in the native area
once padding is added.
For example on the ov2680 which has a native resolution of 1616x1216
the max active resolution of 1600x1200 leaves 16x16 for padding which
meets the worst-case minimum padding requirement of 14x14 on BYT.
But after binning we are left with an native area of 808x608 and
an active area of 800x600. This leaves 8x8 for padding which is not
enough. So on BYT 800x600 is not a valid resolution (it could be
made by lots of cropping without binning but then the remaining
field of view is no good).
Modify atomisp_enum_framesizes_crop() to check the resolution +
padding fits in the native rectangle, removing 800x600 from
the list of valid modes on BYT.
Link: https://lore.kernel.org/r/20230601145858.59652-3-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Separate vcn RAS poison consumption handling from the instance irq, and
register dedicated ras_poison_irq src and funcs for UVD_POISON.
v2:
- Separate ras irq from vcn instance irq
- Improve the subject and code comments
v3:
- Split the patch into three parts
- Improve the code comments
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The IMU firmware is loaded on the host side, not the guest.
Remove IMU in vf2pf ucode id enum.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-By: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is introduced by the code merge and will let the
adev->gfx.kiq[0].ring struct being overrided
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
[drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7)
[drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
amdgpu 0000:04:00.0: amdgpu: Secure display: Generic Failure.
[how]
don't enable secure display on incompatible platforms
Suggested-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Jesse zhang <jesse.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need cast (void*) to (struct radeon_device *)
or (struct radeon_ring *).
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smatch warning -
1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When freesync video mode is enabled, switching resolution from native
mode to one of the freesync video compatible modes can trigger continous
artifacts on some eDP panels when running under KDE. The articating can be seen in the
attached bug report.
[How]
Fix this by restricting updates that require full commit by using the same checks
for stream and scaling changes in the the enable pass of dm_update_crtc_state()
along with the check for compatible timings for freesync vide mode.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Fixes: da5e14909776 ("drm/amd/display: Fix hang when skipping modeset")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
None have been defined yet, so reject anybody setting any. Mesa sets
it to 0 anyway.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The main binary for the pipeline on BYT/ISP2400 has its
ia_css_binary_info.pipeline.left_cropping and .top_cropping fields
set to 12. So a minimum padding of 12 is required.
And for certain bayer-orders additional width / height padding is
necessary so that the ISP crop rectangle for the raw sensor data
can be used to change the bayer-order to the fixed bayer-order
supported by the debayer block.
Without the minmum required padding ia_css_ifmtr_configure() will fail
inside ifmtr_input_start_line() and/or ifmtr_start_column() because
it cannot set the ISP crop rectangle for the raw sensor data.
Fix this by making atomisp_get_padding() take the minimum padding
requirements into account on BYT/ISP2400 (CHT/ISP2401 does not seem to
need this).
Link: https://lore.kernel.org/r/20230601145858.59652-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
No need cast (void*) to (struct amdgpu_device *).
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Passthrough case is treated as root bus and pcie_gen_mask is set as
default value that does not support GEN 3 and GEN 4 for PCIe link
speed. So PCIe link speed will be downgraded at smu hw init in
passthrough condition
[how]
Move get pci info after detect virtualization and check if it is
passthrough case when set pcie_gen_mask
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ACPI code takes care of enabling/disabling the PMC clk(s) for
the sensors as necessary based on the runtime-pm state of the sensor.
But the GMIN code this replaces also set the clk-rate of the PMC clk
to 19.2 MHz. At least on BYT devices the PMC clks may come up running
at 25 MHz instead of the expected 19.2 MHz.
Ensure the sensor clk also runs at the expected 19.2 MHz for sensors
using v4l2-async probing by explicitly setting it to 19.2 MHz when
enumerating sensors in atomisp_csi2_bridge.c.
Link: https://lore.kernel.org/r/20230529103741.11904-22-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
crop support
Some sensor drivers with crop support (e.g. the ov5693 driver) only
return the current crop rectangle + 1/2 (binning) of the current crop
rectangle when calling their enum_frame_sizes op.
This causes 2 issues:
1. Atomisp sets to the crop area to include the padding, where as
the enum_framesizes ioctl should return values without padding.
2. With cropping a lot more standard resolutions are possible then
just these 2 and many apps limit the list given to the end user
to the list returned by enum_framesizes.
Add an alternative enum_framesizes function for sensors which support
cropping to fix both issues.
Link: https://lore.kernel.org/r/20230529103741.11904-21-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Since, we are only interested in having
drm_edid_override_connector_update(), update the value of
connector->edid_blob_ptr. We don't care about the return value of
drm_edid_override_connector_update() here. So, drop count.
Fixes: 550e5d23f147 ("drm/amd/display: assign edid_blob_ptr with edid from debugfs")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
set_abm_event() is never actually used. So, drop it.
Fixes: b8fe56375f78 ("drm/amd/display: Refactor ABM feature")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Tom Rix <trix@redhat.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get_available_dsc_slices() returns the number of indices set, and all of
the users of get_available_dsc_slices() don't cross the returned bound
when iterating over available_slices[]. So, the memset() in
get_available_dsc_slices() is redundant and can be dropped.
Fixes: 97bda0322b8a ("drm/amd/display: Add DSC support for Navi (v2)")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Need flush HDP for MQD putting in vram
2. Zero out mes MQD
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix below checkpatch warnings:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Comparisons should place the constant on the right side of the test
WARNING: Missing a blank line after declarations
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix below checkpatch errors & warnings:
In amdgpu_uvd.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Prefer 'unsigned int *' to bare use of 'unsigned *'
WARNING: Missing a blank line after declarations
WARNING: %Lx is non-standard C, use %llx
ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
WARNING: %LX is non-standard C, use %llX
WARNING: Block comments use * on subsequent lines
+/* multiple fence commands without any stream commands in between can
+ crash the vcpu so just try to emmit a dummy create/destroy msg to
WARNING: Block comments use a trailing */ on a separate line
+ avoid this */
WARNING: braces {} are not necessary for single statement blocks
+ for (j = 0; j < adev->uvd.num_enc_rings; ++j) {
+ fences += amdgpu_fence_count_emitted(&adev->uvd.inst[i].ring_enc[j]);
+ }
In amdgpu_vce.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
WARNING: %Lx is non-standard C, use %llx
WARNING: Possible repeated word: 'we'
ERROR: space required before the open parenthesis '('
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
perform mode2 reset for sdma fed error on gfx v11_0_3.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix below checkpatch insisted error & warnings:
ERROR: space required before the open brace '{'
WARNING: braces {} are not necessary for any arm of this statement
+ if ((type == VCN_ENCODE_RING) && (vcn_config & VCN_BLOCK_ENCODE_DISABLE_MASK)) {
[...]
+ } else if ((type == VCN_DECODE_RING) && (vcn_config & VCN_BLOCK_DECODE_DISABLE_MASK)) {
[...]
+ } else if ((type == VCN_UNIFIED_RING) && (vcn_config & VCN_BLOCK_QUEUE_DISABLE_MASK)) {
[...]
ERROR: code indent should use tabs where possible
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < adev->vcn.num_enc_rings; ++i) {
+ fence[j] += amdgpu_fence_count_emitted(&adev->vcn.inst[j].ring_enc[i]);
+
ERROR: space required before the open parenthesis '('
WARNING: Missing a blank line after declarations
WARNING: please, no spaces at the start of a line
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some drivers which implement selections/crop only allow setting the format
with and height to either the crop rectangle width and height or to half
the crop rectangle width and height (binning). An example of such
a driver is the standard v4l2 ov5693 driver.
First set the crop rectangle to match the requested format
when trying or setting the sensor format, to match these drivers
expectations.
Link: https://lore.kernel.org/r/20230529103741.11904-20-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix below checkpatch warnings:
WARNING: Missing a blank line after declarations
+ struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector);
+ amdgpu_encoder->active_device = amdgpu_encoder->devices & amdgpu_connector->devices;
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allocate large local variable on heap to avoid exceeding the
stack size:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function ‘svm_range_validate_and_map’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:1690:1: warning: the frame size of 2360 bytes is larger than 2048 bytes [-Wframe-larger-than=]
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix below checkpatch insisted error & warnings:
ERROR: Macros with complex values should be enclosed in parentheses
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
WARNING: Block comments use a trailing */ on a separate line
WARNING: Missing a blank line after declarations
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sq.is_enabled is a byte so there is no need to endian swap it.
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rework logic or use do_div() to avoid problems on 32 bit.
v2: add a missing case for XCP macro
v3: fix out of bounds array access
v4: fix xcp handling harder
Acked-by: Guchun Chen <guchun.chen@amd.com> (v1)
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> (v3)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Register GFX RAS functions and initialize GFX RAS.
v2: remove xcp operations.
v3: reuse the return value of gfx_ras_sw_init.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|