summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-01-09loop: drop caches if offset or block_size are changedJaegeuk Kim
If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Reported-by: Martijn Coenen <maco@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09vmbus: fix subchannel removalDexuan Cui
The changes to split ring allocation from open/close, broke the cleanup of subchannels. This resulted in problems using uio on network devices because the subchannel was left behind when the network device was unbound. The cause was in the disconnect logic which used list splice to move the subchannel list into a local variable. This won't work because the subchannel list is needed later during the process of the rescind messages (relid2channel). The fix is to just leave the subchannel list in place which is what the original code did. The list is cleaned up later when the host rescind is processed. Without the fix, we have a lot of "hang" issues in netvsc when we try to change the NIC's MTU, set the number of channels, etc. Fixes: ae6935ed7d42 ("vmbus: split ring buffer allocation from open") Cc: stable@vger.kernel.org Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09tty/serial: Add RISC-V SBI earlycon supportAnup Patel
In RISC-V, the M-mode runtime firmware provide SBI calls for debug prints. This patch adds earlycon support using RISC-V SBI console calls. To enable it, just pass "earlycon=sbi" in kernel parameters. Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-09clk: clps711x: Remove board supportAlexander Shiyan
Since board support for the CLPS711X platform was removed, remove the board support from the clk-clps711x driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09drm/amdgpu: disable system memory page tables for nowChristian König
We hit a problem with IOMMU with that. Disable until we have time to debug further. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hangJim Qu
effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu <Jim.Qu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20Tao Zhou
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun.Li <yukun1.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09clk: qcom: smd: Add support for MSM8998 rpm clocksJeffrey Hugo
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998 for clients to vote on. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: Add Fixed MMIO clock driverJan Kotas
This patch adds a driver for Fixed MMIO clock. The driver reads a clock frequency value from a single 32-bit memory mapped register and registers it as a fixed rate clock. It can be enabled with COMMON_CLK_FIXED_MMIO Kconfig option. Signed-off-by: Jan Kotas <jank@cadence.com> [sboyd@kernel.org: Make of_fixed_mmio_clk_setup() static, use clk_hw based APIs] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09hv_balloon: avoid touching uninitialized struct page during tail onliningVitaly Kuznetsov
Hyper-V memory hotplug protocol has 2M granularity and in Linux x86 we use 128M. To deal with it we implement partial section onlining by registering custom page onlining callback (hv_online_page()). Later, when more memory arrives we try to online the 'tail' (see hv_bring_pgs_online()). It was found that in some cases this 'tail' onlining causes issues: BUG: Bad page state in process kworker/0:2 pfn:109e3a page:ffffe08344278e80 count:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0xfffff80000000() raw: 000fffff80000000 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount ... Workqueue: events hot_add_req [hv_balloon] Call Trace: dump_stack+0x5c/0x80 bad_page.cold.112+0x7f/0xb2 free_pcppages_bulk+0x4b8/0x690 free_unref_page+0x54/0x70 hv_page_online_one+0x5c/0x80 [hv_balloon] hot_add_req.cold.24+0x182/0x835 [hv_balloon] ... Turns out that we now have deferred struct page initialization for memory hotplug so e.g. memory_block_action() in drivers/base/memory.c does pages_correctly_probed() check and in that check it avoids inspecting struct pages and checks sections instead. But in Hyper-V balloon driver we do PageReserved(pfn_to_page()) check and this is now wrong. Switch to checking online_section_nr() instead. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09Drivers: hv: vmbus: Check for ring when getting debug infoDexuan Cui
fc96df16a1ce is good and can already fix the "return stack garbage" issue, but let's also improve hv_ringbuffer_get_debuginfo(), which would silently return stack garbage, if people forget to check channel->state or ring_info->ring_buffer, when using the function in the future. Having an error check in the function would eliminate the potential risk. Add a Fixes tag to indicate the patch depdendency. Fixes: fc96df16a1ce ("Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998Jeffrey Hugo
The gcc_usb3_phy_pipe_clk is generated by the phy, but is also used by the phy during init. The clock needs to be enabled during the init sequence, but may not be fully active until after the init sequence is complete. This causes a catch-22 if the clock status is checked during enable. As a result, skip the checks to avoid the troubling situation. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: qcom: Add missing freq for usb30_master_clk on 8998Jeffrey Hugo
The usb30_master_clk supports a 60Mhz frequency, but that is missing from the table of supported frequencies. Add it. Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocksJeffrey Hugo
A branch clock is basically a clock that can be gated for power savings, but is also what devices/drivers consume. Configuring a branch clock's rate needs to be done at the source, so for all branch clocks which have a defined parent, set CLK_SET_RATE_PARENT so that clk_set_rate() calls on branch clocks can do what is expected. This is important as most drivers do not check the resulting clock rate after a successful clk_set_rate() call, thus the driver may get out of sync with the actual hardware state and weird issues might crop up. This has been observed with issues getting SDHCI to reliably support "fast" cards such as SDR104. Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: vc5: Abort clock configuration without upstream clockMarek Vasut
In case the upstream clock are not set, which can happen in case the VC5 has no valid upstream clock, the $src variable is used uninited by regmap_update_bits(). Check for this condition and return -EINVAL in such case. Note that in case the VC5 has no valid upstream clock, the VC5 can not operate correctly. That is a hardware property of the VC5. The internal oscilator present in some VC5 models is also considered upstream clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-renesas-soc@vger.kernel.org [sboyd@kernel.org: Added comment about probe preventing this from happening in the first place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09nvme: don't initlialize ctrl->cntlid twiceAndrey Smirnov
ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQNJames Dingwall
If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: James Dingwall <james@dingwall.me.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: pad fake subsys NQN vid and ssvid with zerosKeith Busch
We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-multipath: zero out ANA log bufferHannes Reinecke
When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-fabrics: unset write/poll queues for discovery controllersSagi Grimberg
Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: don't ask if controller is fabricsSagi Grimberg
For sure we are a fabric driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: remove dead codeSagi Grimberg
We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix out of bounds access in nvme_cqe_pendingHongbo Yao
There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> [hch: slight coding style update] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: rerun irq setup on IO queue init errorsKeith Busch
If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: use the same attributes when freeing host_mem_desc_bufs.Liviu Dudau
When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix the wrong setting of nr_mapsJianchao Wang
We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09clk: sysfs: fix invalid JSON in clk_dumpLubomir Rintel
Add a missing comma so that the output is valid JSON format again. Fixes: 9fba738a53dd ("clk: add duty cycle support") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: imx: Remove Kconfig duplicate includeAbel Vesa
Commit d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant") introduced this duplicate and incorrectly ordered kconfig include. Fixes: d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: zynqmp: Fix memory allocation in zynqmp_clk_setupGustavo A. R. Silva
Fix memory allocation and use struct_size() in kzalloc(). This also fixes the allocation size to be correct, and smaller, because before we were allocating a bunch of sizeof(struct clk_hw_onecell_data) structures for each struct clk_hw we needed. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Expand commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: tegra: dfll: Fix a potential Oop in remove()Dan Carpenter
If tegra_dfll_unregister() fails then "soc" is an error pointer. We should just return instead of dereferencing it. Fixes: 1752c9ee23fb ("clk: tegra: dfll: Fix drvdata overwriting issue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: imx: fix potential NULL dereference in imx8qxp_lpcg_clk_probe()Wei Yongjun
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 1e3121bfe51a ("clk: imx: add imx8qxp lpcg driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09Merge tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky bug fixes from Guo Ren: "Here are some fixup patches for 5.0-rc1: - fix compile error with pte_alloc - fix handle_irq_perbit break irq flow - fix CACHEV1 store instruction fast retire - fix module relocation error with 807 & 860 - add csky kernel features to documentation" * tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux: irqchip/csky: fixup handle_irq_perbit break irq csky: fixup compile error with pte_alloc csky: fixup CACHEV1 store instruction fast retire csky: fixup relocation error with 807 & 860 Documentation/features: Add csky kernel features
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.17+ <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09drm/bridge: tc358767: use DP connector if no panel setTomi Valkeinen
tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix output H/V syncsTomi Valkeinen
The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: reject modes which require too much BWTomi Valkeinen
The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix initial DP0/1_SRCCTRL valueTomi Valkeinen
Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix single lane configurationTomi Valkeinen
PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANETomi Valkeinen
DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: add bus flagsTomi Valkeinen
tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com
2019-01-08nfit: Mark some functions as __maybe_unusedNathan Chancellor
On arm64 little endian allyesconfig: drivers/acpi/nfit/intel.c:149:12: warning: unused function 'intel_security_unlock' [-Wunused-function] static int intel_security_unlock(struct nvdimm *nvdimm, ^ drivers/acpi/nfit/intel.c:230:12: warning: unused function 'intel_security_erase' [-Wunused-function] static int intel_security_erase(struct nvdimm *nvdimm, ^ drivers/acpi/nfit/intel.c:279:12: warning: unused function 'intel_security_query_overwrite' [-Wunused-function] static int intel_security_query_overwrite(struct nvdimm *nvdimm) ^ drivers/acpi/nfit/intel.c:316:12: warning: unused function 'intel_security_overwrite' [-Wunused-function] static int intel_security_overwrite(struct nvdimm *nvdimm, ^ 4 warnings generated. Mark these functions as __maybe_unused because they are only used when CONFIG_X86 is set. Fixes: 4c6926a23b76 ("acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs") Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-09drm/i915/gvt: Fix workload request allocation before request addZhenyu Wang
In commit 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change"), forgot to handle workload scan path in ELSP handler case which was to optimize scanning earlier instead of in gvt submission thread, so request alloc and add was splitting then which is against right process. This trys to do a partial revert of that commit which still has workload request alloc helper and make sure shadow state population is handled after request alloc for target state buffer. v3: Fix missed workload status setting in request alloc error path v2: Fix dispatch workload err path that should add request after alloc anyway. Fixes: 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change") Cc: Bin Yang <bin.yang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Bin Yang <bin.yang@intel.com> Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-01-08scsi: isci: initialize shost fully before calling scsi_add_host()Logan Gunthorpe
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad707ed ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: lpfc: lpfc_sli: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, I replaced "Drop thru" and "Fall Thru" with "fall through" annotations, which is what GCC is expecting to find. Also, in some cases a dash is added as a token in order to separate the "fall through" annotation from the rest of the comment on the same line, which is what GCC is expecting to find. Addresses-Coverity-ID: 114979 ("Missing break in switch") Addresses-Coverity-ID: 114980 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: smartpqi_init: fix boolean expression in pqi_device_remove_startGustavo A. R. Silva
Fix boolean expression by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 1e46731efd9c ("scsi: smartpqi: check for null device pointers") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: core: Synchronize request queue PM status only on successful resumeStanley Chu
The commit 356fd2663cff ("scsi: Set request queue runtime PM status back to active on resume") fixed up the inconsistent RPM status between request queue and device. However changing request queue RPM status shall be done only on successful resume, otherwise status may be still inconsistent as below, Request queue: RPM_ACTIVE Device: RPM_SUSPENDED This ends up soft lockup because requests can be submitted to underlying devices but those devices and their required resource are not resumed. For example, After above inconsistent status happens, IO request can be submitted to UFS device driver but required resource (like clock) is not resumed yet thus lead to warning as below call stack, WARN_ON(hba->clk_gating.state != CLKS_ON); ufshcd_queuecommand scsi_dispatch_cmd scsi_request_fn __blk_run_queue cfq_insert_request __elv_add_request blk_flush_plug_list blk_finish_plug jbd2_journal_commit_transaction kjournald2 We may see all behind IO requests hang because of no response from storage host or device and then soft lockup happens in system. In the end, system may crash in many ways. Fixes: 356fd2663cff (scsi: Set request queue runtime PM status back to active on resume) Cc: stable@vger.kernel.org Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: pm80xx: reduce indentationJulia Lawall
Delete tab aligning a statement with the right hand side of a preceding assignment rather than the left hand side. Found with the help of Coccinelle. [mkp: added space] Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_paramYueHaibing
The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: megaraid_sas: correct an info messageTomas Henzl
This was apparently forgotten in 894169db1 ("scsi: megaraid_sas: Use 63-bit DMA addressing"). Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: target/iscsi: fix error msg typo when create lio_qr_cache failedLeo Zhang
Signed-off-by: Leo Zhang <nguzcf@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-14 00:49:09 +0000