summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-13mt76: dma: add wrapper macro for accessing queue registersFelix Fietkau
Preparation for adding indirection used for Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: move MT_INT_MASK_CSR to init.cRyder Lee
To avoid redundant MT_INT_MASK_CSR settings. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: introduce mt7915_mac_severe_check()Ryder Lee
In rare cases, TRB pointers might be out of sync leads to RMAC stopping Rx that requires minimal recovery, so add this helper to periodically check TRB status. Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: rework SER debugfs knobRyder Lee
1. get status of system recovery from firmware. 2. add more recovery points. 3. make knob per phy. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: limit minimum twt durationPeter Chiu
The minimum twt duration supported by mt7915 is 64 according to hardware design. Reply station with TWT_SETUP_CMD_DICTATE if min_twt_dur smaller than 64. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: reject duplicated twt flowsPeter Chiu
Reject twt flows with the same parameters to prevent some potential issues causing by duplicated establishment. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix twt table_mask to u16 in mt7915_devPeter Chiu
mt7915 can support 16 twt stations so modify table_mask to u16. Fixes: 3782b69d03e7 ("mt76: mt7915: introduce mt7915_mac_add_twt_setup routine") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: update mt7986 patch in mt7986_wmac_adie_patch_7976()Peter Chiu
Update mt7976 adie patch for different adie version. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: connac: use skb_put_data instead of open codingSean Wang
use skb_put_data instead of open coding in mt76_connac_mcu_update_arp_filter. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: configure soc clocks in mt7986_wmac_initLorenzo Bianconi
Configure mt7986 wmac soc clocks in mt7986_wmac_init routine. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix tx status related use-after-free race on station removalFelix Fietkau
There is a small race window where ongoing tx activity can lead to a skb getting added to the status tracking idr after that idr has already been cleaned up, which will keep the wcid linked in the status poll list. Fix this by only adding status skbs if the wcid pointer is still assigned in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove Fixes: bd1e3e7b693c ("mt76: introduce packet_id idr") Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix encap offload ethernet type checkFelix Fietkau
The driver needs to check if the format is 802.2 vs 802.3 in order to set a tx descriptor flag. skb->protocol can't be used, since it may not be properly initialized for packets coming in from a packet socket. Fix misdetection by checking the ethertype from the skb data instead Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: do not attempt to reorder received 802.3 packets without agg sessionFelix Fietkau
Fixes potential latency / packet drop issues in cases where a BA session has not (yet) been established. Fixes: e195dad14115 ("mt76: add support for 802.3 rx frames") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: disable RX_HDR_TRANS_SHORTBo Jiao
This patch disables RX_TRANS_SHORT to make MDP to do header translation when payload less than 8 bytes, hence the (QoS) null data can be encapsulated to 802.3 format. However, WDS requires (QoS) null data in 802.11 format to created vlan AP interfaces. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: lian.chen <lian.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7603: move spin_lock_bh() to spin_lock()Yunbo Yu
It is unnecessary to call spin_lock_bh() within a tasklet. Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add debugfs knob for RF registers read/writeShayne Chen
Add RF registers read/write support for debugging RF issues, which should be processed by mcu commands. The index of rf registers use the generic regidx, and are combined with two parts: WF selection [31:28] and offset [27:0]. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: fix kernel crash at mt7921_pci_removeSean Wang
The crash log shown it is possible that mt7921_irq_handler is called while devm_free_irq is being handled so mt76_free_device need to be postponed until devm_free_irq is completed to solve the crash we free the mt76 device too early. [ 9299.339655] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9299.339705] #PF: supervisor read access in kernel mode [ 9299.339735] #PF: error_code(0x0000) - not-present page [ 9299.339768] PGD 0 P4D 0 [ 9299.339786] Oops: 0000 [#1] SMP PTI [ 9299.339812] CPU: 1 PID: 1624 Comm: prepare-suspend Not tainted 5.15.14-1.fc32.qubes.x86_64 #1 [ 9299.339863] Hardware name: Xen HVM domU, BIOS 4.14.3 01/20/2022 [ 9299.339901] RIP: 0010:mt7921_irq_handler+0x1e/0x70 [mt7921e] [ 9299.340048] RSP: 0018:ffffa81b80c27cb0 EFLAGS: 00010082 [ 9299.340081] RAX: 0000000000000000 RBX: ffff98a4cb752020 RCX: ffffffffa96211c5 [ 9299.340123] RDX: 0000000000000000 RSI: 00000000000d4204 RDI: ffff98a4cb752020 [ 9299.340165] RBP: ffff98a4c28a62a4 R08: ffff98a4c37a96c0 R09: 0000000080150011 [ 9299.340207] R10: 0000000040000000 R11: 0000000000000000 R12: ffff98a4c4eaa080 [ 9299.340249] R13: ffff98a4c28a6360 R14: ffff98a4cb752020 R15: ffff98a4c28a6228 [ 9299.340297] FS: 00007260840d3740(0000) GS:ffff98a4ef700000(0000) knlGS:0000000000000000 [ 9299.340345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9299.340383] CR2: 0000000000000008 CR3: 0000000004c56001 CR4: 0000000000770ee0 [ 9299.340432] PKRU: 55555554 [ 9299.340449] Call Trace: [ 9299.340467] <TASK> [ 9299.340485] __free_irq+0x221/0x350 [ 9299.340527] free_irq+0x30/0x70 [ 9299.340553] devm_free_irq+0x55/0x80 [ 9299.340579] mt7921_pci_remove+0x2f/0x40 [mt7921e] [ 9299.340616] pci_device_remove+0x3b/0xa0 [ 9299.340651] __device_release_driver+0x17a/0x240 [ 9299.340686] device_driver_detach+0x3c/0xa0 [ 9299.340714] unbind_store+0x113/0x130 [ 9299.340740] kernfs_fop_write_iter+0x124/0x1b0 [ 9299.340775] new_sync_write+0x15c/0x1f0 [ 9299.340806] vfs_write+0x1d2/0x270 [ 9299.340831] ksys_write+0x67/0xe0 [ 9299.340857] do_syscall_64+0x3b/0x90 [ 9299.340887] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Reported-by: ThinerLogoer <logoerthiner1@163.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: make read-only array ppet16_ppet8_ru3_ru0 static constColin Ian King
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but instead make it static const. Also makes the object code a little smaller. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: make read-only array ppet16_ppet8_ru3_ru0 static constColin Ian King
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but instead make it static const. Also makes the object code a little smaller. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: remove SCS featureRyder Lee
SCS is obsoleted and no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix antenna config missing in 6G capDeren Wu
To make sure we have the proper antenna config in 6g cap, move IEEE80211_VHT_CAP_[T/R]X_ANTENNA_PATTERN to stream init. Fixes: edf9dab8ba27 ("mt76: add 6GHz support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix rx reordering with non explicit / psmp ack policyFelix Fietkau
When the QoS ack policy was set to non explicit / psmp ack, frames are treated as not being part of a BA session, which causes extra latency on reordering. Fix this by only bypassing reordering for packets with no-ack policy Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: Add AP mode supportSean Wang
add AP mode support to mt7921 that can work for mt7921[e,s,u] with the common code. Tested-by: Deren Wu <deren.wu@mediatek.com> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_maskLorenzo Bianconi
Use 0xff (GENMASK(7,0)) in mt7915_init_bitrate_mask routine in order to initialize bitrate_mask structure in order to avoid truncating value in memset(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: report rx mode value in mt7915_mac_fill_rx_rateLorenzo Bianconi
Report rx mode in mt7915_mac_fill_rx_rate routine in order to properly add he radiotap if mode is at least HE_SU. Fixes: 1c9db0aa23fd1 ("mt76: mt7915: update rx rate reporting for mt7916") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: do not pass data pointer to mt7915_mcu_muru_debug_setLorenzo Bianconi
Fix typo in mt7915_muru_debug_set routine and pass muru_debug value to mt7915_mcu_muru_debug_set() instead of data pointer. Fixes: 1966a5078f2d ("mt76: mt7915: add mu-mimo and ofdma debugfs knobs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vectorLorenzo Bianconi
Fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector routine if the chip does not support dbdc and the hw reports band_idx set to 1. Fixes: 78fc30a21cf11 ("mt76: mt7915: move testmode data from dev to phy") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix possible uninitialized pointer dereference in ↵Lorenzo Bianconi
mt7986_wmac_gpio_setup Add default case for type switch in mt7986_wmac_gpio_setup routine in order to avoid a possible uninitialized pointer dereference. Fixes: 99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: Fix the error handling path of mt7921_pci_probe()Christophe JAILLET
In case of error, some resources must be freed, as already done above and below the devm_kmemdup() and __mt7921e_mcu_drv_pmctrl() calls added in the commit in Fixes:. Fixes: 602cc0c9618a ("mt76: mt7921e: fix possible probe failure after reboot") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix unbounded shift in mt7915_mcu_beacon_mbssLorenzo Bianconi
Fix the following smatch static checker warning: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1872 mt7915_mcu_beacon_mbss() error: undefined (user controlled) shift '(((1))) << (data[2])' Rely on mac80211 definitions for ieee80211_bssid_index subelement. Fixes: 6b7f9aff7c67 ("mt76: mt7915: introduce 802.11ax multi-bss support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: always call mt7915_wfsys_reset() during initRyder Lee
Soft reboot might not clear certain condition, so always call mt7915_wfsys_reset() during init. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: honor pm user configuration in mt7921_sniffer_interface_iterLorenzo Bianconi
Honor runtime-pm user configuration in mt7921_sniffer_interface_iter routine if we do not have a monitor interface. Fixes: 1f12fa34e5dc5 ("mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR is set") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: rely on mt76_dev rxfilter in mt7921_configure_filterLorenzo Bianconi
mt7921 is currently using rxfilter defined in mt76_dev for rx filter configuration. Fix mt7921_configure_filter implementation. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921u: add suspend/resume supportLorenzo Bianconi
Introduce suspend/resume callbacks for mt7921u driver. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix MBSS index condition in DBDC modeEvelyn Tsai
MT7915_MAX_INTERFACES is per-band declaration in MT7915/MT7986/MT7916. Enlarge vif_mask to 64 bits wide, including the bit operation. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix use-after-free by removing a non-RCU wcid pointerFelix Fietkau
Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18853.879673] async_run_entry_fn+0xe0/0x37c [18853.879689] process_one_work+0x508/0xb98 [18853.879702] worker_thread+0x7f4/0xcd4 [18853.879717] kthread+0x2f8/0x3b8 [18853.879731] ret_from_fork+0x10/0x30 [18853.879741] [18853.879757] The buggy address belongs to the object at ffffffaf989a2000 [18853.879757] which belongs to the cache kmalloc-8k of size 8192 [18853.879774] The buggy address is located 312 bytes inside of [18853.879774] 8192-byte region [ffffffaf989a2000, ffffffaf989a4000) [18853.879787] The buggy address belongs to the page: [18853.879807] page:000000004bda2a59 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d89a0 [18853.879823] head:000000004bda2a59 order:3 compound_mapcount:0 compound_pincount:0 [18853.879839] flags: 0x8000000000010200(slab|head) [18853.879857] raw: 8000000000010200 ffffffffbc89e208 ffffffffb7fb5208 ffffffaec000cc80 [18853.879873] raw: 0000000000000000 0000000000010001 00000001ffffffff 0000000000000000 [18853.879885] page dumped because: kasan: bad access detected [18853.879896] [18853.879907] Memory state around the buggy address: [18853.879922] ffffffaf989a2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879935] ffffffaf989a2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879948] >ffffffaf989a2100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879961] ^ [18853.879973] ffffffaf989a2180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879986] ffffffaf989a2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879998] ================================================================== Cc: stable@vger.kernel.org Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: accept rx frames with non-standard VHT MCS10-11Felix Fietkau
The hardware receives them properly, they should not be dropped Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: accept rx frames with non-standard VHT MCS10-11Felix Fietkau
The hardware receives them properly, they should not be dropped Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: dma: use kzalloc instead of devm_kzalloc for txwiFelix Fietkau
dma unmap is already needed for cleanup anyway, so we don't need the extra tracking and can save a bit of memory here Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: reduce tx queue lock hold timeFelix Fietkau
- call txq dequeue without holding txq lock (locking handled by mac80211) - disable bh around tx queue schedule Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: rework hardware/phy initializationFelix Fietkau
Clean up and fix error paths in mt7915_register_device Initialize second DBDC tx queue in mt7915_dma_init Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix DBDC default band selection on MT7915DFelix Fietkau
This code was accidentally dropped while adding 6 GHz support Fixes: b4d093e321bd ("mt76: mt7915: add 6 GHz support") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13media: exynos4-is: Fix PM disable depth imbalance in fimc_is_probeMiaoqian Lin
If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Fixes: 9a761e436843 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: aspeed: Fix an error handling path in aspeed_video_probe()Christophe JAILLET
A dma_free_coherent() call is missing in the error handling path of the probe, as already done in the remove function. In fact, this call is included in aspeed_video_free_buf(). So use the latter both in the error handling path of the probe and in the remove function. It is easier to see the relation with aspeed_video_alloc_buf() this way. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13Merge tag 'usb-serial-5.18-rc7' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial Johan writes: USB-serial fixes for 5.18-rc7 Here are some new device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
2022-05-13rtlwifi: Use pr_warn instead of WARN_ONCEDongliang Mu
This memory allocation failure can be triggered by fault injection or high pressure testing, resulting a WARN. Fix this by replacing WARN with pr_warn. Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
2022-05-12tty: fix deadlock caused by calling printk() under tty_port->lockQi Zheng
pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner); vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023 vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 fail_dump lib/fault-inject.c:45 [inline] should_fail+0x67b/0x7c0 lib/fault-inject.c:144 __should_failslab+0x152/0x1c0 mm/failslab.c:33 should_failslab+0x5/0x10 mm/slab_common.c:1224 slab_pre_alloc_hook mm/slab.h:468 [inline] slab_alloc_node mm/slub.c:2723 [inline] slab_alloc mm/slub.c:2807 [inline] __kmalloc+0x72/0x300 mm/slub.c:3871 kmalloc include/linux/slab.h:582 [inline] tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175 __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273 tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318 tty_insert_flip_string include/linux/tty_flip.h:37 [inline] pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock); n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356 do_tty_write drivers/tty/tty_io.c:961 [inline] tty_write+0x512/0x930 drivers/tty/tty_io.c:1045 __vfs_write+0x76/0x100 fs/read_write.c:494 [...] other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &port->lock Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com Fixes: b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13Merge tag 'drm/tegra/for-5.19-rc1' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/tegra into drm-next drm/tegra: Changes for v5.19-rc1 Only a few fixes this time, and some debuggability improvements. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220506164004.3922226-1-thierry.reding@gmail.com
2022-05-13Merge tag 'amd-drm-fixes-5.18-2022-05-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-05-11: amdgpu: - Disable ASPM for VI boards on ADL platforms - S0ix DCN3.1 display fix - Resume regression fix - Stable pstate fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511174422.5769-1-alexander.deucher@amd.com
2022-05-12sfc/siena: Reinstate SRIOV init/fini function callsMartin Habets
They were removed in the first series since they were not used for EF10. Put that code back for Siena, with the prototypes in siena_sriov.h since that file is a more applicable place for it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-21 16:55:51 +0000