summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-03-31i2c: stm32f4: Mundane typo fixBhaskar Chowdhury
s/postion/position/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-03-31I2C: JZ4780: Fix bug for Ingenic X1000.周琰杰 (Zhou Yanjie)
Only send "X1000_I2C_DC_STOP" when last byte, or it will cause error when I2C write operation which should look like this: device_addr + w, reg_addr, data; But without this patch, it looks like this: device_addr + w, reg_addr, device_addr + w, data; Fixes: 21575a7a8d4c ("I2C: JZ4780: Add support for the X1000.") Reported-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn> Tested-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-03-30net: phy: broadcom: Only advertise EEE for supported modesFlorian Fainelli
We should not be advertising EEE for modes that we do not support, correct that oversight by looking at the PHY device supported linkmodes. Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30nfp: flower: ignore duplicate merge hints from FWYinjun Zhang
A merge hint message needs some time to process before the merged flow actually reaches the firmware, during which we may get duplicate merge hints if there're more than one packet that hit the pre-merged flow. And processing duplicate merge hints will cost extra host_ctx's which are a limited resource. Avoid the duplicate merge by using hash table to store the sub_flows to be merged. Fixes: 8af56f40e53b ("nfp: flower: offload merge flows") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30ACPI: scan: Fix _STA getting called on devices with unmet dependenciesHans de Goede
Commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") dropped the following 2 lines from acpi_init_device_object(): /* Assume there are unmet deps until acpi_device_dep_initialize() runs */ device->dep_unmet = 1; Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This causes the acpi_bus_get_status() call in acpi_add_single_object() to actually call _STA, even though there maybe unmet deps, leading to errors like these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) Fix this by re-adding the dep_unmet = 1 initialization to acpi_init_device_object() and modifying acpi_bus_check_add() to make sure that dep_unmet always gets setup there, overriding the initial 1 value. This re-fixes the issue initially fixed by commit 63347db0affa ("ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs"), which introduced the removed "device->dep_unmet = 1;" statement. This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055. Fixes: 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: 5.11+ <stable@vger.kernel.org> # 5.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-30drm/tegra: sor: Grab runtime PM reference across resetThierry Reding
The SOR resets are exclusively shared with the SOR power domain. This means that exclusive access can only be granted temporarily and in order for that to work, a rigorous sequence must be observed. To ensure that a single consumer gets exclusive access to a reset, each consumer must implement a rigorous protocol using the reset_control_acquire() and reset_control_release() functions. However, these functions alone don't provide any guarantees at the system level. Drivers need to ensure that the only a single consumer has access to the reset at the same time. In order for the SOR to be able to exclusively access its reset, it must therefore ensure that the SOR power domain is not powered off by holding on to a runtime PM reference to that power domain across the reset assert/deassert operation. This used to work fine by accident, but was revealed when recently more devices started to rely on the SOR power domain. Fixes: 11c632e1cfd3 ("drm/tegra: sor: Implement acquire/release for reset") Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30drm/tegra: dc: Restore coupling of display controllersThierry Reding
Coupling of display controllers used to rely on runtime PM to take the companion controller out of reset. Commit fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") accidentally broke this when runtime PM was removed. Restore this functionality by reusing the hierarchical host1x client suspend/resume infrastructure that's similar to runtime PM and which perfectly fits this use-case. Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30gpu: host1x: Use different lock classes for each clientMikko Perttunen
To avoid false lockdep warnings, give each client lock a different lock class, passed from the initialization site by macro. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30drm/tegra: dc: Don't set PLL clock to 0HzDmitry Osipenko
RGB output doesn't allow to change parent clock rate of the display and PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall not set the display clock to 0Hz since this change propagates to the parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag. This bug stayed unnoticed because by default PLLP is used as the parent clock for the display controller and PLLP silently skips the erroneous 0Hz rate changes because it always has active child clocks that don't permit rate changes. The PLLP isn't acceptable for some devices that we want to upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel clock rate requirements that can't be fulfilled by using PLLP and then the bug pops up in this case since parent clock is set to 0Hz, killing the display output. Don't touch DC clock if pclk=0 in order to fix the problem. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-30Merge tag 'vfio-v5.12-rc6' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fix pfnmap batch carryover (Daniel Jordan) - Fix nvlink Kconfig dependency (Jason Gunthorpe) * tag 'vfio-v5.12-rc6' of git://github.com/awilliam/linux-vfio: vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends vfio/type1: Empty batch for pfnmap pages
2021-03-30Merge tag 'for-linus-5.12b-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "One Xen related security fix (XSA-371)" * tag 'for-linus-5.12b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: don't leak persistent grants from xen_blkbk_map()
2021-03-30thunderbolt: Fix off by one in tb_port_find_retimer()Dan Carpenter
This array uses 1-based indexing so it corrupts memory one element beyond of the array. Fix it by making the array one element larger. Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-30thunderbolt: Fix a leak in tb_retimer_add()Dan Carpenter
After the device_register() succeeds, then the correct way to clean up is to call device_unregister(). The unregister calls both device_del() and device_put(). Since this code was only device_del() it results in a memory leak. Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-29scsi: iscsi: Fix race condition between login and sync threadGulam Mohamed
A kernel panic was observed due to a timing issue between the sync thread and the initiator processing a login response from the target. The session reopen can be invoked both from the session sync thread when iscsid restarts and from iscsid through the error handler. Before the initiator receives the response to a login, another reopen request can be sent from the error handler/sync session. When the initial login response is subsequently processed, the connection has been closed and the socket has been released. To fix this a new connection state, ISCSI_CONN_BOUND, is added: - Set the connection state value to ISCSI_CONN_DOWN upon iscsi_if_ep_disconnect() and iscsi_if_stop_conn() - Set the connection state to the newly created value ISCSI_CONN_BOUND after bind connection (transport->bind_conn()) - In iscsi_set_param(), return -ENOTCONN if the connection state is not either ISCSI_CONN_BOUND or ISCSI_CONN_UP Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> index 91074fd97f64..f4bf62b007a0 100644
2021-03-29ethernet/netronome/nfp: Fix a use after free in nfp_bpf_ctrl_msg_rxLv Yunlong
In nfp_bpf_ctrl_msg_rx, if nfp_ccm_get_type(skb) == NFP_CCM_TYPE_BPF_BPF_EVENT is true, the skb will be freed. But the skb is still used by nfp_ccm_rx(&bpf->ccm, skb). My patch adds a return when the skb was freed. Fixes: bcf0cafab44fd ("nfp: split out common control message handling code") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-29 This series contains updates to ice driver only. Ani does not fail on link/PHY errors during probe as this is not a fatal error to prevent the user from remedying the problem. He also corrects checking Wake on LAN support to be port number, not PF ID. Fabio increases the AdminQ timeout as some commands can take longer than the current value. Chinh fixes iSCSI to use be able to use port 860 by using information from DCBx and other QoS configuration info. Krzysztof fixes a possible race between ice_open() and ice_stop(). Bruce corrects the ordering of arguments in a memory allocation call. Dave removes DCBNL device reset bit which is blocking changes coming from DCBNL interface. Jacek adds error handling for filter allocation failure. Robert ensures memory is freed if VSI filter list issues are encountered. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29cxgb4: avoid collecting SGE_QBASE regs during trafficRahul Lakkireddy
Accessing SGE_QBASE_MAP[0-3] and SGE_QBASE_INDEX registers can lead to SGE missing doorbells under heavy traffic. So, only collect them when adapter is idle. Also update the regdump range to skip collecting these registers. Fixes: 80a95a80d358 ("cxgb4: collect SGE PF/VF queue map") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30Merge tag 'intel-pinctrl-v5.12-3' of ↵Linus Walleij
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.12-3 * Check if device is present, which is not the case in Xen The following is an automated git shortlog grouped by driver: intel: - check REVID register value for device presence
2021-03-29clk: qcom: camcc: Update the clock ops for the SC7180Taniya Das
Some of the RCGs could be always ON from the XO source and could be used as the clock on signal for the GDSC to be operational. In the cases where the GDSCs are parked at different source with the source clock disabled, it could lead to the GDSC to be stuck at ON/OFF during gdsc disable/enable. Thus park the RCGs at XO during clock disable and update the rcg_ops to use the shared_ops. Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1616809265-11912-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-29vfio/nvlink: Add missing SPAPR_TCE_IOMMU dependsJason Gunthorpe
Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there are compile errors: drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration] ret = mm_iommu_put(data->mm, data->mem); As PPC only defines these functions when the config is set. Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only IOMMU that could have satisfied IOMMU_API on POWERNV. Fixes: 179209fa1270 ("vfio: IOMMU_API should be selected") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-29gianfar: Handle error code at MAC address changeClaudiu Manoil
Handle return error code of eth_mac_addr(); Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29ethernet: myri10ge: Fix a use after free in myri10ge_sw_tsoLv Yunlong
In myri10ge_sw_tso, the skb_list_walk_safe macro will set (curr) = (segs) and (next) = (curr)->next. If status!=0 is true, the memory pointed by curr and segs will be free by dev_kfree_skb_any(curr). But later, the segs is used by segs = segs->next and causes a uaf. As (next) = (curr)->next, my patch replaces seg->next to next. Fixes: 536577f36ff7a ("net: myri10ge: use skb_list_walk_safe helper for gso segments") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29mlxsw: spectrum: Fix ECN marking in tunnel decapsulationIdo Schimmel
Cited commit changed the behavior of the software data path with regards to the ECN marking of decapsulated packets. However, the commit did not change other callers of __INET_ECN_decapsulate(), namely mlxsw. The driver is using the function in order to ensure that the hardware and software data paths act the same with regards to the ECN marking of decapsulated packets. The discrepancy was uncovered by commit 5aa3c334a449 ("selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value") that aligned the selftest to the new behavior. Without this patch the selftest passes when used with veth pairs, but fails when used with mlxsw netdevs. Fix this by instructing the device to propagate the ECT(1) mark from the outer header to the inner header when the inner header is ECT(0), for both NVE and IP-in-IP tunnels. A helper is added in order not to duplicate the code between both tunnel types. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29clk: socfpga: fix iomem pointer cast on 64-bitKrzysztof Kozlowski
Pointers should be cast with uintptr_t instead of integer. This fixes warning when compile testing on ARM64: drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’: drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixes: b7cec13f082f ("clk: socfpga: Look for the GPIO_DB_CLK by its offset") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-29drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()Nirmoy Das
Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-29drm/amd/pm: no need to force MCLK to highest when no display connectedEvan Quan
Correct the check for vblank short. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-29ice: Cleanup fltr list in case of allocation issuesRobert Malz
When ice_remove_vsi_lkup_fltr is called, by calling ice_add_to_vsi_fltr_list local copy of vsi filter list is created. If any issues during creation of vsi filter list occurs it up for the caller to free already allocated memory. This patch ensures proper memory deallocation in these cases. Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions") Signed-off-by: Robert Malz <robertx.malz@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Use port number instead of PF ID for WoLAnirudh Venkataramanan
As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Fix for dereference of NULL pointerJacek Bułatek
Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com> Co-developed-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: remove DCBNL_DEVRESET bit from PF stateDave Ertman
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29PM: runtime: Fix race getting/putting suppliers at probeAdrian Hunter
pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das <asutoshd@codeaurora.org> Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-29PM: runtime: Fix ordering in pm_runtime_get_suppliers()Adrian Hunter
rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-29ACPI: tables: x86: Reserve memory occupied by ACPI tablesRafael J. Wysocki
The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
2021-03-29ice: fix memory allocation callBruce Allan
Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: prevent ice_open and ice_stop during resetKrzysztof Goreczny
There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Recognize 860 as iSCSI port in CEE modeChinh T Cao
iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Increase control queue timeoutFabio Pricoco
250 msec timeout is insufficient for some AQ commands. Advice from FW team was to increase the timeout. Increase to 1 second. Fixes: 7ec59eeac804 ("ice: Add support for control queues") Signed-off-by: Fabio Pricoco <fabio.pricoco@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Continue probe on link/PHY errorsAnirudh Venkataramanan
An incorrect NVM update procedure can result in the driver failing probe. In this case, the recommended resolution method is to update the NVM using the right procedure. However, if the driver fails probe, the user will not be able to update the NVM. So do not fail probe on link/PHY errors. Fixes: 1a3571b5938c ("ice: restore PHY settings on media insertion") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29drm/exynos/decon5433: Remove the unused include statementsTian Tao
This driver doesn't reference of_gpio.h, so drop it. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-03-28Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolutionDmitry Osipenko
Drop unnecessary zero-checking of ABS_MT_TOUCH_MAJOR resolution since there is no difference between setting resolution to 0 vs not setting it at all. This change makes code cleaner a tad. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210328235507.19240-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-28drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmitLv Yunlong
In pvc_xmit, if __skb_pad(skb, pad, false) failed, it will free the skb in the first time and goto drop. But the same skb is freed by kfree_skb(skb) in the second time in drop. Maintaining the original function unchanged, my patch adds a new label out to avoid the double free if __skb_pad() failed. Fixes: f5083d0cee08a ("drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28Merge tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay fix from Miguel Ojeda: "Remove in_interrupt() usage (Sebastian Andrzej Siewior)" * tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux: auxdisplay: Remove in_interrupt() usage.
2021-03-28Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target, ibmvscsi). The most serious are the target pscsi oom and the qla2xxx revert which can otherwise cause a use after free" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Clean up after failure in pscsi_map_sg() scsi: target: pscsi: Avoid OOM in pscsi_map_sg() scsi: mpt3sas: Fix error return code of mpt3sas_base_attach() scsi: qedi: Fix error return code of qedi_alloc_global_queues() scsi: Revert "qla2xxx: Make sure that aborted commands are freed" scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()
2021-03-27Input: elants_i2c - fix division by zero if firmware reports zero phys sizeDmitry Osipenko
Touchscreen firmware of ASUS Transformer TF700T reports zeros for the phys size. Hence check whether the size is zero and don't set the resolution in this case. Reported-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210302100824.3423-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-27Merge tag 'icc-5.12-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.12 This contains a few tiny drivers and core fixes that have been reported during this cycle. - msm8939: Remove rpm-ids from non-RPM nodes - core: Fix error return code of icc_link_destroy() - core: Fix kerneldoc warning Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Fix kerneldoc warning interconnect: core: fix error return code of icc_link_destroy() interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
2021-03-27usb: cdnsp: Fixes issue with dequeuing requests after disabling endpointPawel Laszczak
Patch fixes the bug: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 4137 Comm: uvc-gadget Tainted: G OE 5.10.0-next-20201214+ #3 Hardware name: ASUS All Series/Q87T, BIOS 0908 07/22/2014 RIP: 0010:cdnsp_remove_request+0xe9/0x530 [cdnsp_udc_pci] Code: 01 00 00 31 f6 48 89 df e8 64 d4 ff ff 48 8b 43 08 48 8b 13 45 31 f6 48 89 42 08 48 89 10 b8 98 ff ff ff 48 89 1b 48 89 5b 08 <41> 83 6d 50 01 41 83 af d0 00 00 00 01 41 f6 84 24 78 20 00 00 08 RSP: 0018:ffffb68d00d07b60 EFLAGS: 00010046 RAX: 00000000ffffff98 RBX: ffff9d29c57fbf00 RCX: 0000000000001400 RDX: ffff9d29c57fbf00 RSI: 0000000000000000 RDI: ffff9d29c57fbf00 RBP: ffffb68d00d07bb0 R08: ffff9d2ad9510a00 R09: ffff9d2ac011c000 R10: ffff9d2a12b6e760 R11: 0000000000000000 R12: ffff9d29d3fb8000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d29d3fb88c0 FS: 0000000000000000(0000) GS:ffff9d2adba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000102164005 CR4: 00000000001706f0 Call Trace: cdnsp_ep_dequeue+0x3c/0x90 [cdnsp_udc_pci] cdnsp_gadget_ep_dequeue+0x3f/0x80 [cdnsp_udc_pci] usb_ep_dequeue+0x21/0x70 [udc_core] uvcg_video_enable+0x19d/0x220 [usb_f_uvc] uvc_v4l2_release+0x49/0x90 [usb_f_uvc] v4l2_release+0xa5/0x100 [videodev] __fput+0x99/0x250 ____fput+0xe/0x10 task_work_run+0x75/0xb0 do_exit+0x370/0xb80 do_group_exit+0x43/0xa0 get_signal+0x12d/0x820 arch_do_signal_or_restart+0xb2/0x870 ? __switch_to_asm+0x36/0x70 ? kern_select+0xc6/0x100 exit_to_user_mode_prepare+0xfc/0x170 syscall_exit_to_user_mode+0x2a/0x40 do_syscall_64+0x43/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe969cf5dd7 Code: Unable to access opcode bytes at RIP 0x7fe969cf5dad. Problem occurs for UVC class. During disconnecting the UVC class disable endpoints and then start dequeuing all requests. This leads to situation where requests are removed twice. The first one in cdnsp_gadget_ep_disable and the second in cdnsp_gadget_ep_dequeue function. Patch adds condition in cdnsp_gadget_ep_dequeue function which allows dequeue requests only from enabled endpoint. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-03-26Merge tag 'for-5.12/dm-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target's optional argument processing. - Fix DM core's zoned model and zone sectors checks. - Fix spurious "detected capacity change" pr_info() when creating new DM device. - Fix DM ioctl out of bounds array access in handling of DM_LIST_DEVICES_CMD when no devices exist. * tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm ioctl: fix out of bounds array access when no devices dm: don't report "detected capacity change" on device creation dm table: Fix zoned model check and zone sectors check dm verity: fix DM_VERITY_OPTS_MAX value
2021-03-26dm ioctl: fix out of bounds array access when no devicesMikulas Patocka
If there are not any dm devices, we need to zero the "dev" argument in the first structure dm_name_list. However, this can cause out of bounds write, because the "needed" variable is zero and len may be less than eight. Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is too small to hold the "nl->dev" value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-03-26Merge tag 'acpi-5.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a memory management regression in ACPICA, repair an ACPI blacklist entry damaged inadvertently during the 5.11 cycle and fix the bookkeeping of devices with the same primary device ID in the ACPI core. Specifics: - Make ACPICA use the same object cache consistently when allocating and freeing objects (Vegard Nossum) - Add a callback pointer removed inadvertently during the 5.11 cycle to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris Chiu) - Make the ACPI device enumeration core use IDA for creating names of ACPI device objects with the same primary device ID to avoid using duplicate device object names in some cases (Andy Shevchenko)" * tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Always create namespace nodes using acpi_ns_create_node() ACPI: scan: Use unique number for instance_no ACPI: video: Add missing callback back for Sony VPCEH3U1E
2021-03-26Merge tag 'pm-5.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix an issue related to device links in the runtime PM framework and debugfs usage in the Energy Model code. Specifics: - Modify the runtime PM device suspend to avoid suspending supplier devices before the consumer device's status changes to RPM_SUSPENDED (Rafael Wysocki) - Change the Energy Model code to prevent it from attempting to create its main debugfs directory too early (Lukasz Luba)" * tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: EM: postpone creating the debugfs dir till fs_initcall PM: runtime: Defer suspending suppliers
generated by cgit (git 2.34.1) at 2025-09-14 07:07:41 +0000