| Age | Commit message (Collapse) | Author |
|---|
|
The MAX15303 is a full-featured, flexible, efficient, 6A digital
point-of-load (PoL) controller with integrated switching MOSFETs. It
contains advanced power management and telemetry features.
Tested-by: Robin Getz <rgetz503@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250108-dev-max15303-v1-1-9154eb2c9d9e@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for adm1273 which is similar to adm1275 and other chips
of the series.
Signed-off-by: John Erasmus Mari Geronimo <johnerasmusmari.geronimo@analog.com>
Link: https://lore.kernel.org/r/20250106131740.305988-3-johnerasmusmari.geronimo@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The new customer ID was found on a MPG X870E CARBON WIFI (MS-7E49) with
a NCT6687D chip.
Signed-off-by: John Audia <therealgraysky@proton.me>
[groeck: Resolved conflicts in Documentation/hwmon/nct6683.rst]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit 255ab27a0743 ("hwmon: (pwm-fan) Introduce start from stopped state
handling") added two of_property_read_u32() calls after the driver was
reworked to use device_property_* in commit dfd977d85b15 ("hwmon: (pwm-fan)
Make use of device properties"), so convert those as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250102170429.791912-1-peter@korsgaard.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Introduce I3C support by defining I3C accessors for regmap and
implementing an I3C driver. Enable I3C for the NXP P3T1755.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241220093635.11218-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Put generic probe functionality into a separate function and let the I2C
driver call it. This is a preparation for adding I3C support which will
also use the generic probe function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241219225522.3490-11-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The regmap-only conversion allows us to store the client-pointer as the
'context' parameter for regmap. This not only makes the private struct
smaller, but also allows proper separation of I2C and I3C in the future.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241219225522.3490-10-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_regulator_get_enable() was introduced exactly to avoid open coding
regulator handling like in this driver. Make use of this helper.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219225522.3490-9-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
After previous refactoring, it is now possible to make
lm75_write_config() a simple inline function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219225522.3490-8-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Hide register size differences in regmap access functions to simplify
runtime code and to simplify adding support for I3C devices. Also
use regmap API functions for bit operations where possible.
For this to work, the 16-bit and 8-bit configuration register has to be
mapped to a 16-bit value. Unlike other registers, this register is a
low-byte-first register, presumably for compatibility with chips with
8-bit wide configuration registers. Hide the differences in the regmap
access code.
While at it, enable alarm attribute support for TMP112.
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the driver to monitor Intel common redundant power supply (crps185)
with hwmon over pmbus.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20241217173537.192331-3-ninad@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add this LM75 compatible sensor which needs a separate entry because of
its default sampling time and SMBusAlert handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241218074131.4351-7-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add debugfs file for the PMBUS_REVISION command. This command provides
information about PMBus protocol revision number.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216175044.4144442-2-ninad@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-hwmon-v1-1-ea72a6a46c36@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This value was found on an ASRock B650 Steel Legend WiFi with an
NCT6686D chip.
Signed-off-by: Max Ammann <max@maxammann.org>
Link: https://lore.kernel.org/r/20241214102201.122851-1-max@maxammann.org
[groeck: htmldocs fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
i2c_device_id::driver_data to 0
This driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize it.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241204140857.1691402-2-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Limiting the scope of devicetree support to CONFIG_OF prevents use of this
driver with ACPI via PRP0001. Drop the dependency.
While at it,
- Switch of.h for mod_devicetable.h include given the use of struct
of_device_id which is defined in that header
- Add I2C device ID for p3t1085
- Drop the unnecessary include of hwmon-sysfs.h.
Cc: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241204141754.4051186-1-linux@roeck-us.net
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
TMP108/P3T1085 are powered by the V+/VCC regulator, add support for it.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for TUF GAMING X670E PLUS.
Signed-off-by: Li XingYang <yanhuoguifan@gmail.com>
[groeck: Massaged description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to the LibreHardwareMonitor project, LibreHardwareMonitorLib/
Hardware/Motherboard/Lpc/EC/EmbeddedController.cs file, fan cpu opt
is supported by the AMD600 EC. Registers are described as follows.
BoardFamily.Amd600, new Dictionary<ECSensor, EmbeddedControllerSource>
{
{ ECSensor.FanCPUOpt, new EmbeddedControllerSource
("CPU Optional Fan", SensorType.Fan, 0x00b0, 2) },
}
Add FanCPUOpt support for AMD600.
Signed-off-by: Li XingYang <yanhuoguifan@gmail.com>
[groeck: Massaged subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
DEFAULT_SYMBOL_NAMESPACE must already be defined when <linux/export.h>
is included. So move the define above the include block.
Fixes: c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add initial support for the Texas Instruments TPS25990 eFuse.
This adds the basic PMBUS telemetry support for the device.
From Karol Przybylski:
The tps25990_read_word_data function contains a block of unreachable code
caused by the syntactic structure in the PMBUS_VIRT_READ_IIN_MAX case.
Specifically, the return TPS25990_READ_IIN_PEAK; statement immediately
exits the function, making the next lines unreachable.
This patch removes the return statement, leaving the expected handling.
Discovered in coverity: CID 1602227
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to MODULE_IMPORT_NS API change]
[karprzy7@gmail.com: Fix unreachable code in tps25990_read_word_data]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a module parameter to force the write protection mode of pmbus chips.
4 protections modes are provided to start with:
* 0: Remove the write protection
* 1: Disable all writes except to the WRITE_PROTECT, OPERATION,
PAGE, ON_OFF_CONFIG and VOUT_COMMAND commands
* 2: Disable all writes except to the WRITE_PROTECT, OPERATION and
PAGE commands
* 3: Disable all writes except to the WRITE_PROTECT command
Of course, if the parameter is not provided, the default write protection
status of the pmbus chips is left untouched.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Writing PMBus protected registers does succeed from the smbus perspective,
even if the write is ignored by the device and a communication fault is
raised. This fault will silently be caught and cleared by pmbus irq if one
has been registered.
This means that the regulator call may return succeed although the
operation was ignored.
With this change, the operation which are not supported will be properly
flagged as such and the regulator framework won't even try to execute them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to EXPORT_SYMBOL_NS_GPL API change]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add suspend/resume handler in order to stop firmware polling
during s2idle. This was just waking-up the system without a real
benefit.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Using an #ifdef in a C source files to have different definitions
of the same symbol makes the code harder to read and understand.
Furthermore it makes it harder to test compilation of the different
branches.
Replace the ifdeffery with IS_ENABLED() which is just a normal
conditional.
The resulting binary is still the same as before as the compiler
optimizes away all the unused code and definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Switch to guard() for mutex handling to simplify the code, getting rid
of the 'ret = x, break; return ret;' construct and return the result
of the operation instead.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Function declarations can be in one line. module_init|exit macros should
be tied to the function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a /proc/interrupts formatting regression
- Have the BCM2836 interrupt controller enter power management states
properly
- Other fixlets
* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
genirq/proc: Add missing space separator back
irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v3: Fix irq_complete_ack() comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Have the Automatic IBRS setting check on AMD does not falsely fire in
the guest when it has been set already on the host
- Make sure cacheinfo structures memory is allocated to address a boot
NULL ptr dereference on Intel Meteor Lake which has different numbers
of subleafs in its CPUID(4) leaf
- Take care of the GDT restoring on the kexec path too, as expected by
the kernel
- Make sure SMP is not disabled when IO-APIC is disabled on the kernel
cmdline
- Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to
propagate changes to the kernelmode page tables, to the user portion,
in PTI
- Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups
can get lost and thus user-visible delays happen
- Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU
write of 0 (WRPKRU) which will mark PKRU in its init state and thus
lose the actual buffer
* tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails
x86/cacheinfo: Delete global num_cache_leaves
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
x86/kexec: Restore GDT on return from ::preserve_context kexec
x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC
x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables
x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation
x86/pkeys: Ensure updated PKRU value is XRSTOR'd
x86/pkeys: Change caller of update_pkru_in_sigframe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
- CPU hotplug ordering fixes
- Add missing MODULE_DESCRIPTION for rnull
- bcache error value fix
- virtio-blk queue freeze fix
* tag 'block-6.13-20241207' of git://git.kernel.dk/linux:
blk-mq: move cpuhp callback registering out of q->sysfs_lock
blk-mq: register cpuhp callback after hctx is added to xarray table
virtio-blk: don't keep queue frozen during system suspend
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
nvme-pci: remove two deallocate zeroes quirks
block: rnull: add missing MODULE_DESCRIPTION
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
|
|
Pull more drm fixes from Simona Vetter:
"Due to mailing list unreliability we missed the amdgpu pull, hence
part two with that now included:
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
fixes
- amdkfd fixes"
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-04:
amdgpu:
- Jpeg work handler fix for VCN 1.0
- HDP flush fixes
- ACPI EDID sanity check
- OLED panel backlight fix
- DC YCbCr fix
- DC Detile buffer size debugging
- DC prefetch calculation fix
- DC VTotal handling fix
- DC HBlank fix
- ISP fix
- SR-IOV fix
- Workload profile fixes
- DCN 4.0.1 resume fix
amdkfd:
- GC 12.x fix
- GC 9.4.x fix
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206190452.2571042-1-alexander.deucher@amd.com
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered"
* tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: detach regmap from dev on regmap_exit
regmap: Use correct format specifier for logging range errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes and device ID updates for SPI.
The Apple change flags the driver as being compatible with the core's
GPIO chip select support, fixing support for some systems"
* tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Fix the IS_ERR() bug for devm_clk_get_optional_enabled()
spi: intel: Add Panther Lake SPI controller support
spi: apple: Set use_gpio_descriptors to true
spi: mpc52xx: Add cancel_work_sync before module remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Core:
- Further prevent card detect during shutdown
Host drivers:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10
tablet"
* tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Further prevent card detect during shutdown
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
|
|
Commit
5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEPMT SMP NOPTI
CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1
RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
Fixes: 6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 6.3+
Link: https://lore.kernel.org/r/20241128002247.26726-2-ricardo.neri-calderon@linux.intel.com
|
|
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
Reviewed-by: David Laight <david.laight@aculab.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"One bug fix and some documentation updates:
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth
iommufd: Fix out_fput in iommufd_fault_alloc()
iommufd: Fix typos in kernel-doc comments
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes v6.13-rc2:
- v3d performance counter fix.
- A lot of DP-MST related fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2ce1650d-801f-4265-a876-5a8743f1c82b@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Missing init value and 64-bit write-order check (Zhanjung)
- Fix a memory allocation issue causing lockdep violation (John)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z1BidZBFQOLjz__J@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
