summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-03-10rtw89: 8852c: add chip::dle_memPing-Ke Shih
These tables are used to configure hardware buffer size according to operating mode. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-11-pkshih@realtek.com
2022-03-10rtw89: add page_regs to handle v1 chipsPing-Ke Shih
These registers are used to configure and access page size of HCI. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-10-pkshih@realtek.com
2022-03-10rtw89: add chip_info::{h2c,c2h}_reg to support more chipsPing-Ke Shih
This is a register-based H2C/C2H interface to exchange data with firmware. Since the register addresses of 8852A and 8852C are different, add fields to chip_info to support this. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-9-pkshih@realtek.com
2022-03-10rtw89: add hci_func_en_addr to support variant generationPing-Ke Shih
The HCI_FUNC_EN address of 8852C is different from existing chipset, so add a chip_info::hci_func_en_addr to fill the address individually. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-8-pkshih@realtek.com
2022-03-10rtw89: add power_{on/off}_funcPing-Ke Shih
New chipset uses individual power_{on/off} functions to replace old power sequences, because it is hard to represent new complicated flow in a sequence table. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-7-pkshih@realtek.com
2022-03-10rtw89: read chip version depends on chip IDPing-Ke Shih
Only 8852A may get wrong chip version if power isn't on, so it needs additional actions to correct the version. Later chips don't need those. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-6-pkshih@realtek.com
2022-03-10rtw89: pci: use a struct to describe all registers address related to DMA ↵Ping-Ke Shih
channel We have had a struct rtw89_pci_ch_dma_addr to describe register address, so use it as regular. Since the addresses should be changed dynamically according to operating mode, I don't change it to be constant. These changes don't affect the logic, so I put them in this separated patch. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-5-pkshih@realtek.com
2022-03-10rtw89: pci: add V1 of PCI channel addressPing-Ke Shih
8852CE use V1 address, and flow is totally shared with 8852AE. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-4-pkshih@realtek.com
2022-03-10rtw89: pci: add struct rtw89_pci_infoPing-Ke Shih
Use this struct to implement chip::ops related to PCI interface. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-3-pkshih@realtek.com
2022-03-10rtw89: 8852c: add 8852c empty filesPing-Ke Shih
Add these files, and then I can add specific chip::ops or chip::info along with the existing chip. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-2-pkshih@realtek.com
2022-03-10brcmfmac: make the read-only array pktflags static constColin Ian King
Don't populate the read-only array pktflags on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307223227.165963-1-colin.i.king@gmail.com
2022-03-10rtlwifi: rtl8192ce: remove duplicated function '_rtl92ce_phy_set_rf_sleep'Lu Jicong
This function exists in phy_common.c as '_rtl92c_phy_set_rf_sleep'. Switch to the one in common file. Signed-off-by: Lu Jicong <jiconglu58@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220306090846.28523-1-jiconglu58@gmail.com
2022-03-10bcma: gpio: remove redundant re-assignment of chip->ownerColin Ian King
There are two identical assignments of chip->owner to the same value, the second assignment is redundant and can be removed. Cleans up cppcheck warning: drivers/bcma/driver_gpio.c:184:15: style: Variable 'chip->owner' is reassigned a value before the old one has been used. [redundantAssignment] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220303085841.1124766-1-colin.i.king@gmail.com
2022-03-10cw1200: use time_is_after_jiffies() instead of open coding itWang Qing
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1646018060-61275-1-git-send-email-wangqing@vivo.com
2022-03-10carl9170: devres ar->survey_infoChristian Lamparter
driver keeps the same survey_info struct for its lifetime around. This is used because while firmware does help by providing accounting information of the current channel, it doesn't keep track on the remaining channels. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/9b9a059b384f49587f4384ba47f01d3fb2115b22.1646250537.git.chunkeey@gmail.com
2022-03-10carl9170: replace bitmap_zalloc with devm_bitmap_zallocChristian Lamparter
the mem_bitmap is kept around for the lifetime of the driver device. This is a perfect candidate for devm. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/0a79221aa5477501c3def032e95ef8018973a514.1646250537.git.chunkeey@gmail.com
2022-03-10carl9170: devres-ing input_allocate_deviceChristian Lamparter
devres will take care of freeing the input_device once it is no longer needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/f81a6ff3b02116c6a448c42eecb546ea5d46c108.1646250537.git.chunkeey@gmail.com
2022-03-10carl9170: devres-ing hwrng_register usageChristian Lamparter
devres will take care of freeing the hwrng once it is no longer needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/d1c16490462a9371ab3cc16a018ef5e08382a35e.1646250537.git.chunkeey@gmail.com
2022-03-10carl9170: replace GFP_ATOMIC in ampdu_action, it can sleepChristian Lamparter
Since ~2010, the driver is allowed to sleep in the ampdu_action callback thanks to: commit 85ad181ea788 ("mac80211: allow drivers to sleep in ampdu_action") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/0036538d0933626a1a5eb2c2c3935cf173028926.1646250537.git.chunkeey@gmail.com
2022-03-10ath10k: Fix error handling in ath10k_setup_msa_resourcesMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path. Fixes: 727fec790ead ("ath10k: Setup the msa resources before qmi init") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220308070238.19295-1-linmq006@gmail.com
2022-03-10ath11k: remove unneeded flush_workqueueLv Ruyi (CGEL ZTE)
All work currently pending will be done first by calling destroy_workqueue, so there is no need to flush it explicitly. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220301013246.2052570-1-lv.ruyi@zte.com.cn
2022-03-10ath6kl: add device ID for WLU5150-D81André Apitzsch
This device with a male Mini-B USB connector is part of Panasonic TVs. Signed-off-by: André Apitzsch <git@apitzsch.eu> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220302211436.8746-1-git@apitzsch.eu
2022-03-10PCI: fu740: Drop redundant '-gpios' from DT GPIO lookupBen Dooks
The calls to devm_gpiod_get_optional() have the -gpios at the end of the name but the GPIO core code is already adding the suffix during the lookup. This means the PCIe driver is not finding the necessary reset or power lines to allow initialisation of the PCIe. Drop the redundant '-gpios' when we look up GPIOs from the DT. This bug has not been noticed because if U-Boot has setup the GPIO lines for the hardware when it does the PCIe initialisation (either by booting from PCIe or user command to access PCIe) then the PCIe will work in Linux. The U-Boot as supplied by SiFive does not by default initialise any PCIe component. Link: https://lore.kernel.org/r/20220221210347.1335004-1-ben.dooks@codethink.co.uk Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-03-10vhost: allow batching hint without sizeJason Wang
Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") tries to reject the IOTLB message whose size is zero. But the size is not necessarily meaningful, one example is the batching hint, so the commit breaks that. Fixing this be reject zero size message only if the message is used to update/invalidate the IOTLB. Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reported-by: Eli Cohen <elic@nvidia.com> Cc: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220310075211.4801-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eli Cohen <elic@nvidia.com>
2022-03-10spi: rockchip-sfc: fix platform_get_irq.cocci warningYihao Han
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220310094806.13734-1-hanyihao@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-10Merge tag 'spi-fix-v5.17-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One fix for type conversion issues when working out maximum scatter/gather segment sizes. It caused problems for some systems where the limits overflow due to the type conversion" * tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix invalid sgs value
2022-03-10Merge tag 'gpio-fixes-for-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a probe failure for Tegra241 GPIO controller in gpio-tegra186 - revert changes that caused a regression in the sysfs user-space interface - correct the debounce time conversion in GPIO ACPI - statify a struct in gpio-sim and fix a typo - update registers in correct order (hardware quirk) in gpio-ts4900 * tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: fix a typo gpio: ts4900: Do not set DAT and OE together gpio: sim: Declare gpio_sim_hog_config_item_ops static gpiolib: acpi: Convert ACPI value of debounce to microseconds gpio: Revert regression in sysfs-gpio (gpiolib.c) gpio: tegra186: Add IRQ per bank for Tegra241
2022-03-10PCI: apple: Change MSI handling to handle 4-cell AIC fwspec formHector Martin
AIC2 changes the IRQ fwspec to add a cell. Always use the second-to-last cell for the MSI handling, so it will work for both AIC1 and AIC2 devices. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220309192123.152028-2-marcan@marcan.st
2022-03-10gpio: ts4900: Use SPDX headerKris Bahnsen
Remove boilerplate, use the SPDX license identifier. Signed-off-by: Kris Bahnsen <kris@embeddedTS.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-03-10gpio: sim: fix a typoBartosz Golaszewski
Just noticed this when applying Andy's patch. s/childred/children/ Fixes: cb8c474e79be ("gpio: sim: new testing module") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-03-10gpio: ts4900: Do not set DAT and OE togetherMark Featherston
This works around an issue with the hardware where both OE and DAT are exposed in the same register. If both are updated simultaneously, the harware makes no guarantees that OE or DAT will actually change in any given order and may result in a glitch of a few ns on a GPIO pin when changing direction and value in a single write. Setting direction to input now only affects OE bit. Setting direction to output updates DAT first, then OE. Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support") Signed-off-by: Mark Featherston <mark@embeddedTS.com> Signed-off-by: Kris Bahnsen <kris@embeddedTS.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-03-10Merge branch irq/aic-pmu into irq/irqchip-nextMarc Zyngier
* irq/aic-pmu: : . : Prefix branch for the M1 PMU support, adding the required : irqchip changes. Shared with the arm64 tree. : . irqchip/apple-aic: Fix cpumask allocation for FIQs irqchip/apple-aic: Move PMU-specific registers to their own include file arm64: dts: apple: Add t8303 PMU nodes arm64: dts: apple: Add t8103 PMU interrupt affinities irqchip/apple-aic: Wire PMU interrupts irqchip/apple-aic: Parse FIQ affinities from device-tree dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts dt-bindings: apple,aic: Add CPU PMU per-cpu pseudo-interrupts dt-bindings: arm-pmu: Document Apple PMU compatible strings Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-03-10irqchip/apple-aic: Fix cpumask allocation for FIQsMarc Zyngier
An emparassing typo: allocating a pointer instead of the object pointed to. No harm done, as the pointer is large enough for what we are using the object for, but still... Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220310050238.4478-1-guozhengkui@vivo.com
2022-03-10can: gs_usb: add VID/PID for ABE CAN Debugger devicesBen Evans
Add support for ABE CAN Debugger devices using the gs_usb driver. Link: https://lore.kernel.org/all/20220309124132.291861-22-mkl@pengutronix.de Signed-off-by: Ben Evans <benny.j.evans92@gmail.com> Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add VID/PID for CES CANext FD devicesPeter Fink
Add support for Christ Electronic Systems GmbH CANext FD devices using the gs_usb driver. Link: https://lore.kernel.org/all/20220309124132.291861-21-mkl@pengutronix.de Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add extended bt_const featurePeter Fink
For example CANext FD needs to distinguish between bittiming constants valid for arbitration phase and data phase to reach maximum performance at higher speeds. Link: https://lore.kernel.org/all/20220309124132.291861-20-mkl@pengutronix.de Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Christoph Möhring <cmoehring@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: activate quirks for CANtact Pro unconditionallyPeter Fink
The CANtact Pro from LinkLayer Labs is based on the LPC54616 µC, which is affected by the NXP LPC USB transfer erratum. However, the current firmware (version 2) doesn't set the GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX bit. This patch sets the feature GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX to workaround this issue. For the GS_USB_BREQ_DATA_BITTIMING USB control message the CANtact Pro firmware uses a request value, which is already used by the candleLight firmware for a different purpose (GS_USB_BREQ_GET_USER_ID). This patch set the feature GS_CAN_FEATURE_QUIRK_BREQ_CANTACT_PRO to workaround this issue. Link: https://lore.kernel.org/all/20220309124132.291861-19-mkl@pengutronix.de Cc: Ryan Edwards <ryan.edwards@gmail.com> Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Christoph Möhring <cmoehring@christ-es.de> [mkl: improve check for CANtact Pro and add GS_CAN_FEATURE_QUIRK_BREQ_CANTACT_PRO quirk] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ valueMarc Kleine-Budde
For the GS_USB_BREQ_DATA_BITTIMING USB control message the CANtact Pro firmware uses a request value, which is already used by the candleLight firmware for a different purpose (GS_USB_BREQ_GET_USER_ID). This patch adds a quirk to use the CANtact Pro's value for the GS_USB_BREQ_DATA_BITTIMING USB control message instead of the official one. Link: https://lore.kernel.org/all/20220309124132.291861-18-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add usb quirk for NXP LPC546xx controllersPeter Fink
Introduce a workaround for a NXP chip errata on LPC546xx controllers (Errata sheet LPC546xx / USB.15). According to the document corruption can occur when the following conditions are met: * A TX (IN) transfer happens after a RX (OUT) transfer. * The RX (OUT) transfer length is 4 + N * 16 (N >= 0) bytes. Even though the struct gs_host_frame has a size of 76 bytes for a FD frame, which does not apply to the above rule, corruption could be seen. Adding a dummy byte to break the second condition also on transfer lengths with 4 + N * 8 bytes reliably circumvents USB transfer data corruption. The firmware can now request this quirk by setting GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX. Link: https://lore.kernel.org/all/20220309124132.291861-17-mkl@pengutronix.de Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Christoph Möhring <cmoehring@christ-es.de> Signed-off-by: Alexander Schartner <aschartner@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add CAN-FD supportPeter Fink
CANtact Pro from Linklayer is the first gs_usb compatible device supporting CAN-FD with a different HW and re-written candlelight FW. Support for CAN-FD is indicated by the device setting the GS_CAN_FEATURE_FD flag. CAN-FD support is requested by the driver with the GS_CAN_MODE_FD flag. The CAN-FD specific data bit timing parameters are set with the GS_USB_BREQ_DATA_BITTIMING control message. This patch is based on the Eric Evenchick's gs_usb_fd driver (which itself is a fork of gs_usb). The gs_usb_fd code base was reintegrated into the gs_usb driver, and reworked to not break the existing classical-CAN only hardware. Link: https://lore.kernel.org/all/20220309124132.291861-16-mkl@pengutronix.de Link: https://github.com/linklayer/gs_usb_fd/issues/2 Co-developed-by: Eric Evenchick <eric@evenchick.com> Signed-off-by: Eric Evenchick <eric@evenchick.com> Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_framePeter Fink
Modify struct gs_host_frame to make use of a union and DECLARE_FLEX_ARRAY to be able to store different data (lengths), which will be added in later commits. Store the gs_host_frame length in TX direction (host -> device) in struct gs_can::hf_size_tx and RX direction (device -> host) in struct gs_usb::hf_size_rx so it must be calculated only once. Link: https://lore.kernel.org/all/20220309124132.291861-15-mkl@pengutronix.de Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: support up to 3 channels per deviceMarc Kleine-Budde
Some STM32G3 chips support up to 3 CAN-FD channels, increase number of supported channels in this driver to 3 accordingly. Link: https://lore.kernel.org/all/20220309124132.291861-14-mkl@pengutronix.de Suggested-by: Ryan Edwards <ryan.edwards@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: gs_usb_probe(): introduce udev and make use of itMarc Kleine-Budde
Introduce the variable udev in the gs_usb_probe() function to hold a pointer to the struct usb_device. This avoids recalculating the value several times in this function. Link: https://lore.kernel.org/all/20220309124132.291861-13-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE featureMarc Kleine-Budde
The widely used open source firmware candleLight supports padding the USB packets to max packet size to improve performance on Windows systems. This patch documents the bit. Link: https://lore.kernel.org/all/20220309124132.291861-12-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/pull/7 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: document the USER_ID featureMarc Kleine-Budde
The widely used open source firmware candleLight has optional support for reading/writing of an user defined value into the device's flash. This is indicated by the GS_CAN_FEATURE_USER_ID feature. The corresponding request are GS_USB_BREQ_GET_USER_ID and GS_USB_BREQ_SET_USER_ID. This patch documents these values. Link: https://lore.kernel.org/all/20220309124132.291861-11-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/commit/1453d70dc9a9d98ac254893ba5114b8e826e0e39 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentationMarc Kleine-Budde
In the binary interface a feature bit might have a corresponding mode bit (of the same value). The GS_CAN_FEATURE_IDENTIFY feature doesn't come with a mode. Document this, to avoid gaps when adding more features/modes later. Link: https://lore.kernel.org/all/20220309124132.291861-10-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add HW timestamp mode bitMarc Kleine-Budde
Newer versions of the widely used open source firmware candleLight support hardware timestamps. The support is activated by setting the GS_CAN_MODE_HW_TIMESTAMP in the GS_USB_BREQ_MODE request. Although timestamp support is not yet supported by this driver, add the missing bit for documentation purpose. Link: https://lore.kernel.org/all/20220309124132.291861-9-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/commit/44431f4a4354a878fbd15b273bf04fce1dcdff7e Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all ↵Marc Kleine-Budde
bt_const->feature This patch moves the call to SET_NETDEV_DEV() after all handling (including cleanup) of the bt_const->feature is done. This looks more consistent. Link: https://lore.kernel.org/all/20220309124132.291861-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()Marc Kleine-Budde
This patch rewraps the arguments of usb_control_msg() and usb_fill_bulk_urb() to make full use of the standard line length of 80 characters. Link: https://lore.kernel.org/all/20220309124132.291861-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: rewrap error messagesMarc Kleine-Budde
This patch rewraps the arguments of netdev_err() to make full use of the standard line length of 80 characters. Link: https://lore.kernel.org/all/20220309124132.291861-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-10-01 04:22:46 +0000