summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-07-28net: hns3: fix a TX timeout issueYonglong Liu
When the queue depth and queue parameters are modified, there is a low probability that TX timeout occurs. The two operations cause the link to be down or up when the watchdog is still working. All queues are stopped when the link is down. After the carrier is on, all queues are woken up. If the watchdog detects the link between the carrier on and wakeup queues, a false TX timeout occurs. So fix this issue by modifying the sequence of carrier on and queue wakeup, which is symmetrical to the link down action. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix desc filling bug when skb is expanded or linearedYunsheng Lin
The linear and frag data part may be changed when the skb is expanded or lineared in skb_cow_head() or skb_checksum_help(), which is called by hns3_fill_skb_desc(), so the linear len return by skb_headlen() before the calling of hns3_fill_skb_desc() is unreliable. Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix this bug. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28i2c: slave: add sanity check when unregisteringWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-28i2c: slave: improve sanity check when registeringWolfram Sang
Add check for ERR_PTR and simplify code while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-28spi: rockchip: Fix error in SPI slave pio readJon Lin
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it. Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling") Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Support 64-location deep FIFOsJon Lin
The FIFO depth of SPI V2 is 64 instead of 32, add support for it. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Config spi rx dma burst size depend on xfer lengthJon Lin
The burst length can be adjusted according to the transmission length to improve the transmission rate Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: spi-topcliff-pch: drop call to wakeup-disableVaibhav Gupta
Before generic upgrade, both .suspend() and .resume() were invoking pci_enable_wake(pci_dev, PCI_D3hot, 0). Hence, disabling wakeup in both states. (Normal trend is .suspend() enables and .resume() disables the wakeup.) This was ambiguous and may be buggy. Instead of replicating the legacy behavior, drop the wakeup-disable call. Fixes: f185bcc77980 ("spi: spi-topcliff-pch: use generic power management") Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200727172936.661567-1-vaibhavgupta40@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: spidev: Align buffers for DMAChristian Eggers
Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28regulator: cros-ec-regulator: Fix double free of desc->name.Pi-Hsun Shih
The desc->name field is allocated with devm_kstrdup, but is also kfreed on the error path, causing it to be double freed. Remove the kfree on the error path. Fixes: 8d9f8d57e023 ("regulator: Add driver for cros-ec-regulator") Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200728091909.2009771-1-pihsun@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28memory: jz4780_nemc: Only request IO memory the driver will usePaul Cercueil
The driver only uses the registers up to offset 0x54. Since the EFUSE registers are in the middle of the NEMC registers, we only request the registers we will use for now - that way the EFUSE driver can probe too. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/20200728152629.28878-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-28bus: fsl-mc: Add ACPI support for fsl-mcMakarand Pawagi
Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table to extract memory and other resources. Interrupt (GIC ITS) information is extracted from the MADT table by drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c. IORT table is parsed to configure DMA. Signed-off-by: Makarand Pawagi <makarand.pawagi@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-13-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28bus/fsl-mc: Refactor the MSI domain creation in the DPRC driverDiana Craciun
The DPRC driver is not taking into account the msi-map property and assumes that the icid is the same as the stream ID. Although this assumption is correct, generalize the code to include a translation between icid and streamID. Furthermore do not just copy the MSI domain from parent (for child containers), but use the information provided by the msi-map property. If the msi-map property is missing from the device tree retain the old behaviour for backward compatibility ie the child DPRC objects inherit the MSI domain from the parent. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-12-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/irq: Make of_msi_map_rid() PCI bus agnosticLorenzo Pieralisi
There is nothing PCI bus specific in the of_msi_map_rid() implementation other than the requester ID tag for the input ID space. Rename requester ID to a more generic ID so that the translation code can be used by all busses that require input/output ID translations. No functional change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-11-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/irq: make of_msi_map_get_device_domain() bus agnosticDiana Craciun
of_msi_map_get_device_domain() is PCI specific but it need not be and can be easily changed to be bus agnostic in order to be used by other busses by adding an IRQ domain bus token as an input parameter. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-10-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/device: Add input id to of_dma_configure()Lorenzo Pieralisi
Devices sitting on proprietary busses have a device ID space that is owned by the respective bus and related firmware bindings. In order to let the generic OF layer handle the input translations to an IOMMU id, for such busses the current of_dma_configure() interface should be extended in order to allow the bus layer to provide the device input id parameter - that is retrieved/assigned in bus specific code and firmware. Augment of_dma_configure() to add an optional input_id parameter, leaving current functionality unchanged. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/iommu: Make of_map_rid() PCI agnosticLorenzo Pieralisi
There is nothing PCI specific (other than the RID - requester ID) in the of_map_rid() implementation, so the same function can be reused for input/output IDs mapping for other busses just as well. Rename the RID instances/names to a generic "id" tag. No functionality change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-7-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Add an input ID to acpi_dma_configure()Lorenzo Pieralisi
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Remove useless PCI bus walkLorenzo Pieralisi
The PCI bus domain number (used in the iort_match_node_callback() - pci_domain_nr() call) is cascaded through the PCI bus hierarchy at PCI bus enumeration time, therefore there is no need in iort_find_dev_node() to walk the PCI bus upwards to grab the root bus to be passed to iort_scan_node(), the device->bus PCI bus pointer will do. Remove this useless code. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-5-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_msi_map_rid() PCI agnosticLorenzo Pieralisi
There is nothing PCI specific in iort_msi_map_rid(). Rename the function using a bus protocol agnostic name, iort_msi_map_id(), and convert current callers to it. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_get_device_domain IRQ domain agnosticLorenzo Pieralisi
iort_get_device_domain() is PCI specific but it need not be, since it can be used to retrieve IRQ domain nexus of any kind by adding an irq_domain_bus_token input to it. Make it PCI agnostic by also renaming the requestor ID input to a more generic ID name. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-3-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NCLorenzo Pieralisi
When the iort_match_node_callback is invoked for a named component the match should be executed upon a device with an ACPI companion. For devices with no ACPI companion set-up the ACPI device tree must be walked in order to find the first parent node with a companion set and check the parent node against the named component entry to check whether there is a match and therefore an IORT node describing the in/out ID translation for the device has been found. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-2-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-27soc: qcom: pdr: Reorder the PD state indication ackSibi Sankar
The Protection Domains (PD) have a mechanism to keep its resources enabled until the PD down indication is acked. Reorder the PD state indication ack so that clients get to release the relevant resources before the PD goes down. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200701195954.9007-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27drm: hold gem reference until object is no longer accessedSteve Cohen
A use-after-free in drm_gem_open_ioctl can happen if the GEM object handle is closed between the idr lookup and retrieving the size from said object since a local reference is not being held at that point. Hold the local reference while the object can still be accessed to fix this and plug the potential security hole. Signed-off-by: Steve Cohen <cohens@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1595284250-31580-1-git-send-email-cohens@codeaurora.org
2020-07-27net: mscc: ocelot: fix hardware timestamp dequeue logiclaurent brando
The next hw timestamp should be snapshoot to the read registers only once the current timestamp has been read. If none of the pending skbs matches the current HW timestamp just gracefully flush the available timestamp by reading it. Signed-off-by: laurent brando <laurent.brando@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27drm/dbi: Fix SPI Type 1 (9-bit) transferPaul Cercueil
The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit data, the 9th (MSB) bit being the data/command bit. In order to do that, it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if the byte corresponds to data, clears it otherwise. The 7 MSB are padding. The array of now 16-bit values is then passed to the SPI core for transfer. This function was broken since its introduction, as the length of the SPI transfer was set to the payload size before its conversion, but the payload doubled in size due to the 8-bit -> 16-bit conversion. Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support") Cc: <stable@vger.kernel.org> # 5.4+ Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200703141341.1266263-1-paul@crapouillou.net
2020-07-27RDMA/mlx5: Fix prefetch memory leak if get_prefetchable_mr failsJason Gunthorpe
destroy_prefetch_work() must always be called if the work is not going to be queued. The num_sge also should have been set to i, not i-1 which avoids the condition where it shouldn't have been called in the first place. Cc: stable@vger.kernel.org Fixes: fb985e278a30 ("RDMA/mlx5: Use SRCU properly in ODP prefetch") Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-27RDMA/cm: Add min length checks to user structure copiesJason Gunthorpe
These are missing throughout ucma, it harmlessly copies garbage from userspace, but in this new code which uses min to compute the copy length it can result in uninitialized stack memory. Check for minimum length at the very start. BUG: KMSAN: uninit-value in ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091 CPU: 0 PID: 8457 Comm: syz-executor069 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1df/0x240 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091 ucma_write+0x5c5/0x630 drivers/infiniband/core/ucma.c:1764 do_loop_readv_writev fs/read_write.c:737 [inline] do_iter_write+0x710/0xdc0 fs/read_write.c:1020 vfs_writev fs/read_write.c:1091 [inline] do_writev+0x42d/0x8f0 fs/read_write.c:1134 __do_sys_writev fs/read_write.c:1207 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1204 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1204 do_syscall_64+0xb0/0x150 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 34e2ab57a911 ("RDMA/ucma: Extend ucma_connect to receive ECE parameters") Fixes: 0cb15372a615 ("RDMA/cma: Connect ECE to rdma_accept") Link: https://lore.kernel.org/r/0-v1-d5b86dab17dc+28c25-ucma_syz_min_jgg@nvidia.com Reported-by: syzbot+086ab5ca9eafd2379aa6@syzkaller.appspotmail.com Reported-by: syzbot+7446526858b83c8828b2@syzkaller.appspotmail.com Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-27drm/drm_fb_helper: fix fbdev with sparc64Sam Ravnborg
Recent kernels have been reported to panic using the bochs_drm framebuffer under qemu-system-sparc64 which was bisected to commit 7a0483ac4ffc ("drm/bochs: switch to generic drm fbdev emulation"). The backtrace indicates that the shadow framebuffer copy in drm_fb_helper_dirty_blit_real() is trying to access the real framebuffer using a virtual address rather than use an IO access typically implemented using a physical (ASI_PHYS) access on SPARC. The fix is to replace the memcpy with memcpy_toio() from io.h. memcpy_toio() uses writeb() where the original fbdev code used sbus_memcpy_toio(). The latter uses sbus_writeb(). The difference between writeb() and sbus_memcpy_toio() is that writeb() writes bytes in little-endian, where sbus_writeb() writes bytes in big-endian. As endian does not matter for byte writes they are the same. So we can safely use memcpy_toio() here. Note that this only fixes bochs, in general fbdev helpers still have issues with mixing up system memory and __iomem space. Fixing that will require a lot more work. v3: - Improved changelog (Daniel) - Added FIXME to fbdev_use_iomem (Daniel) v2: - Added missing __iomem cast (kernel test robot) - Made changelog readable and fix typos (Mark) - Add flag to select iomem - and set it in the bochs driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
2020-07-27genirq/affinity: Make affinity setting if activated opt-inThomas Gleixner
John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping <john@metanate.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
2020-07-27spi: sun4i: update max transfer size reportedJonathan Liu
The spi-sun4i driver already has the ability to do large transfers. However, the max transfer size reported is still fifo depth - 1. Update the max transfer size reported to the max value possible. Fixes: 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO size") Signed-off-by: Jonathan Liu <net147@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200727072328.510798-1-net147@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-27spi: imx: enable runtime pm supportClark Wang
Enable runtime pm support for spi-imx driver. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727063354.17031-1-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-27platform/x86: thinkpad_acpi: use standard charge control attribute namesThomas Weißschuh
The standard attributes were only introduced after the ones from thinkpad_acpi in commit 813cab8f3994 ("power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties"). The new standard attributes are aliased to their previous names, preserving backwards compatibility. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-07-27platform/x86: thinkpad_acpi: remove unused definesThomas Weißschuh
They were never used. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-07-27regulator: pca9450: Convert to use module_i2c_driverAxel Lin
Use module_i2c_driver to simplify driver init boilerplate. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200725014414.1825183-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-27ACPI: APEI: remove redundant assignment to variable rcColin Ian King
The variable rc is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' checkHanjun Guo
acpi_map_pxm_to_node() will never return a NUMA node greater than MAX_NUMNODES, so the 'node >= MAX_NUMNODES' check is not needed. Remove it. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: NUMA: Remove the useless sub table pointer checkHanjun Guo
In acpi_parse_entries_array(), the subtable entries (entry.hdr) will never be NULL, so for ACPI subtable handler in struct acpi_subtable_proc, will never handle NULL subtable entries. Remove those useless subtable pointer checks in the callback handlers. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()Hanjun Guo
acpi_disabled, pointer id and table_header are checked in acpi_table_parse_entries_array(), and acpi_parse_entries_array() is only called by acpi_table_parse_entries_array(), so those checks in acpi_parse_entries_array() are duplicate. Remove those duplicated checks and move the table_size check to acpi_table_parse_entries_array() as well. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Do not increment operation_region reference counts for field unitsErik Kaneda
ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70 Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects. Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region. This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object. Link: https://github.com/acpica/acpica/commit/e17b28cf Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Replace one-element array with flexible-arrayGustavo A. R. Silva
ACPICA commit 7ba2f3d91a32f104765961fda0ed78b884ae193d The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the linux codebase from now on. This issue was found with the help of Coccinelle and audited _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://github.com/acpica/acpica/commit/7ba2f3d9 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27Merge tag 'drivers_soc_for_5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers SOC: TI Keystone driver update for v5.9 - TI K3 Ring Accelerator updates - Few non critical warining fixes * tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify soc: ti: k3: fix semicolon.cocci warnings soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring' dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair soc: ti: k3-ringacc: separate soc specific initialization soc: ti: k3-ringacc: add request pair of rings api. soc: ti: k3-ringacc: add ring's flags to dump soc: ti: k3-ringacc: Move state tracking variables under a struct dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-27powercap: Add Power Limit4 supportSumeet Pawnikar
Modern Intel Mobile platforms support power limit4 (PL4), which is the SoC package level maximum power limit (in Watts). It can be used to preemptively limits potential SoC power to prevent power spikes from tripping the power adapter and battery over-current protection. This patch enables this feature by exposing package level peak power capping control to userspace via RAPL sysfs interface. With this, application like DTPF can modify PL4 power limit, the similar way of other package power limit (PL1). As this feature is not tested on previous generations, here it is enabled only for the platform that has been verified to work, for safety concerns. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: Use valid link to the ACPI specificationTiezhu Yang
Currently, acpi.info is an invalid link to access ACPI specification, the new valid link is https://uefi.org/specifications. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27mmc: jz4740: Use pm_ptr() macroPaul Cercueil
Use the newly introduced pm_ptr() macro to simplify the code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27x86/cpu: Relocate sync_core() to sync_core.hRicardo Neri
Having sync_core() in processor.h is problematic since it is not possible to check for hardware capabilities via the *cpu_has() family of macros. The latter needs the definitions in processor.h. It also looks more intuitive to relocate the function to sync_core.h. This changeset does not make changes in functionality. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20200727043132.15082-3-ricardo.neri-calderon@linux.intel.com
2020-07-27Merge back cpufreq material for v5.9.Rafael J. Wysocki
2020-07-27ACPI: OSL: Clean up the removal of unused memory mappingsRafael J. Wysocki
Fold acpi_os_map_cleanup_deferred() into acpi_os_map_remove() and pass the latter to INIT_RCU_WORK() in acpi_os_drop_map_ref() to make the code more straightforward. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()Rafael J. Wysocki
There is no reason (knwon to me) why any of the existing users of acpi_os_unmap_iomem() would need to wait for the unused memory mappings left by it to actually go away, so use the deferred unmapping of ACPI memory introduced previously in that function. While at it, fold __acpi_os_unmap_iomem() back into acpi_os_unmap_iomem(), which has become a simple wrapper around it, and make acpi_os_unmap_memory() call the latter. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-29 15:34:50 +0000