| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some pin control fixes for v6.6 which have been stacking up in my
tree.
Dmitry's fix to some locking in the core is the most substantial, that
was a really neat fix.
The rest is the usual assorted spray of minor driver fixes.
- Drop some minor code causing warnings in the Lantiq driver
- Fix out of bounds write in the Nuvoton driver
- Fix lost IRQs with CONFIG_PM in the Starfive driver
- Fix a locking issue in find_pinctrl()
- Revert a regressive Tegra debug patch
- Fix the Renesas RZN1 pin muxing"
* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzn1: Enable missing PINMUX
Revert "pinctrl: tegra: Add support to display pin function"
pinctrl: avoid unsafe code pattern in find_pinctrl()
pinctrl: starfive: jh7110: Add system pm ops to save and restore context
pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
pinctrl: nuvoton: wpcm450: fix out of bounds write
pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()
|
|
Add the configuration of CHACHA20-POLY1305 to the driver and send the
message to hardware so that the NIC supports the algorithm.
Signed-off-by: Shihong Wang <shihong.wang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231009080946.7655-2-louis.peens@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rtw89_btc_btf_set_mon_reg
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Use struct_size() and flex_array_size() helpers to calculate proper sizes
for allocation and memcpy().
Don't change logic at all, and result is identical as before.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011063725.25276-2-pkshih@realtek.com
|
|
rtw89_btc_btf_set_slot_table
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Use struct_size() and flex_array_size() helpers to calculate proper sizes
for allocation and memcpy().
Don't change logic at all, and result is identical as before.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011063725.25276-1-pkshih@realtek.com
|
|
Add IEEE80211_RADIOTAP_EHT and IEEE80211_RADIOTAP_EHT_USIG radiotap to
fill basic EHT NSS, MCS, GI and bandwidth.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011115256.6121-7-pkshih@realtek.com
|
|
Since we have TX rate from RA report of C2H event and RX rate from RX
descriptor, show them in debugfs like
TX rate [1]: EHT 2SS MCS-7 GI:3.2 BW:80 (hw_rate=0x427)
RX rate [1]: EHT 2SS MCS-7 GI:3.2 BW:80 (hw_rate=0x427)
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011115256.6121-6-pkshih@realtek.com
|
|
RA (rate adaptive) C2H report is to reflect current TX rate firmware is
using. Parse C2H event encoded in EHT mode, and then user space and debugfs
can use the information to know TX rate.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011115256.6121-5-pkshih@realtek.com
|
|
Set EHT rate mask to RA (rate adaptive) H2C command according to handshake
result. The EHT rate mask format looks like
44 28 12 4 0
+----------------+----------------+--------+----+
| EHT 2SS rate | EHT 1SS rate | OFDM | CCK|
+----------------+----------------+--------+----+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011115256.6121-4-pkshih@realtek.com
|
|
There are two kinds of RX packets -- normal and its PPDU status packet.
Both have RX descriptor containing some information such as rate, GI and
bandwidth, and we use these information to find the relationship between
two kinds of packets. Then, we can get more information like RSSI and EVM
from PPDU status packet.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011115256.6121-3-pkshih@realtek.com
|
|
Simplify 'rtl92ee_dm_common_info_self_update()',
'rtl8723be_dm_common_info_self_update()', and
'rtl8821ae_dm_common_info_self_update()' by using
'list_count_nodes()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011045227.7989-1-dmantipov@yandex.ru
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Add __counted_by for struct p54_cal_database.
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Suggested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231009161028.it.544-kees@kernel.org
|
|
The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().
Fixes: 5cb630925b49 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.
Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
value 8196 cmode runtime
2. ifconfig eth0 up
[ 19.901356] ------------[ cut here ]------------
[ 19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[ 19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[ 19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[ 19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[ 19.901460] sp : ffff80000f66b970
[ 19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[ 19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[ 19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[ 19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[ 19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[ 19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[ 19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[ 19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[ 19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[ 19.901487] Call trace:
[ 19.901488] page_pool_alloc_frag+0x3c/0x230
[ 19.901490] __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[ 19.901494] otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[ 19.901498] otx2_open+0x228/0xa70 [rvu_nicpf]
[ 19.901501] otx2vf_open+0x20/0xd0 [rvu_nicvf]
[ 19.901504] __dev_open+0x114/0x1d0
[ 19.901507] __dev_change_flags+0x194/0x210
[ 19.901510] dev_change_flags+0x2c/0x70
[ 19.901512] devinet_ioctl+0x3a4/0x6c4
[ 19.901515] inet_ioctl+0x228/0x240
[ 19.901518] sock_ioctl+0x2ac/0x480
[ 19.901522] __arm64_sys_ioctl+0x564/0xe50
[ 19.901525] invoke_syscall.constprop.0+0x58/0xf0
[ 19.901529] do_el0_svc+0x58/0x150
[ 19.901531] el0_svc+0x30/0x140
[ 19.901533] el0t_64_sync_handler+0xe8/0x114
[ 19.901535] el0t_64_sync+0x1a0/0x1a4
[ 19.901537] ---[ end trace 678c0bf660ad8116 ]---
Fixes: b2e3406a38f0 ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.
This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.
Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Replace if condition of napi_schedule_prep/__napi_schedule and use bool
from napi_schedule directly where possible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231009133754.9834-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rework network interface logic. Before this change, the code flow was:
1. Disable interrupt
2. Try to schedule a NAPI
3. Check if it was possible (NAPI is not already scheduled)
4. emit BUG() if we receive interrupt while a NAPI is scheduled
If some application busy poll or set gro_flush_timeout low enough, it's
possible to reach the BUG() condition. Given that the condition may
happen and it wouldn't be a bug, rework the logic to permit such case
and prevent stall with interrupt never enabled again.
Disable the interrupt only if the NAPI can be scheduled (aka it's not
already scheduled) and drop the printk and BUG() call. With these
change, in the event of a NAPI already scheduled, the interrupt is
simply ignored with nothing done.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231009133754.9834-4-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.
Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace drivers that still use napi_schedule_prep/__napi_schedule
with napi_schedule helper as it does the same exact check and call.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231009133754.9834-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
bfa_ioc_get_adapter_manufacturer() simply copies a string literal into
`manufacturer`.
Another implementation of bfa_ioc_get_adapter_manufacturer() from
drivers/scsi/bfa/bfa_ioc.c uses memset + strscpy:
| void
| bfa_ioc_get_adapter_manufacturer(struct bfa_ioc_s *ioc, char *manufacturer)
| {
| memset((void *)manufacturer, 0, BFA_ADAPTER_MFG_NAME_LEN);
| strscpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
| }
Let's use `strscpy_pad` to eliminate some redundant work while still
NUL-terminating and NUL-padding the destination buffer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-ethernet-brocade-bna-bfa_ioc-c-v2-1-78e0f47985d3@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-lantiq_gswip-c-v1-1-d55a986a14cc@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-mt7530-c-v1-1-ec6677a6436a@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect `irqname` to be NUL-terminated based on its use with
of_irq_get_byname() -> of_property_match_string() wherein it is used
with a format string and a `strcmp`:
| pr_debug("comparing %s with %s\n", string, p);
| if (strcmp(string, p) == 0)
| return i; /* Found it; return index */
NUL-padding is not required as is evident by other assignments to
`irqname` which do not NUL-pad:
| if (port->flags & MVPP2_F_DT_COMPAT)
| snprintf(irqname, sizeof(irqname), "tx-cpu%d", i);
| else
| snprintf(irqname, sizeof(irqname), "hif%d", i);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231010-strncpy-drivers-net-ethernet-marvell-mvpp2-mvpp2_main-c-v1-1-51be96ad0324@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We can see that linfo->lmac_type is expected to be NUL-terminated based
on the `... - 1`'s present in the current code. Presumably making room
for a NUL-byte at the end of the buffer.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also prefer the more idiomatic strscpy usage of (dest, src,
sizeof(dest)) rather than (dest, src, SOME_LEN).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231010-strncpy-drivers-net-ethernet-marvell-octeontx2-af-cgx-c-v1-1-a443e18f9de8@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2023-10-10
Just one small fix this time around.
Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe
function.
* tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
====================
Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Three fixes for the pata_parport driver to address a typo in the
code, a missing operation implementation and port reset handling in
the presence of slave devices (Ondrej)
- Fix handling of ATAPI devices reset with the fit3 protocol driver of
the pata_parport driver (Ondrej)
- A follow up fix for the recent suspend/resume corrections to avoid
attempting rescanning on resume the scsi device associated with an
ata disk when the request queue of the scsi device is still suspended
(in addition to not doing the rescan if the scsi device itself is
still suspended) (me)
* tag 'ata-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: Do not rescan devices with a suspended queue
ata: pata_parport: fit3: implement IDE command set registers
ata: pata_parport: add custom version of wait_after_reset
ata: pata_parport: implement set_devctl
ata: pata_parport: fix pata_parport_devchk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix for i2c-hid when used on DT platforms (Johan Hovold)
- kernel crash fix on removal of the Logitech USB receiver (Hans de
Goede)
* tag 'for-linus-2023101101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
HID: i2c-hid: fix handling of unpopulated devices
|
|
Currently hns3 driver supports vf fault detect feature. Several ras caused
by VF resources don't need to do PF function reset for recovery. The driver
only needs to reset the specified VF.
So this patch adds process in ras module. New process will get detailed
information about ras and do the most correct measures based on these
accurate information.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20231007031215.1067758-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently hns3 driver is designed to support VF fault detect feature in
new hardwares. For code compatibility, vf fault detect cap bit is added to
the driver.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20231007031215.1067758-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When there are CT table entries, and you rmmod nfp, the following
events can happen:
task1：
nfp_net_pci_remove
↓
nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3)
↓
nfp_zone_table_entry_destroy(1)
task2：
nfp_fl_ct_handle_nft_flow(2)
When the execution order is (1)->(2)->(3), it will crash. Therefore, in
the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to
be executed synchronously.
At the same time, in order to solve the deadlock problem and the problem
of rtnl_lock sometimes failing, replace rtnl_lock with the private
nfp_fl_lock.
Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
use struct_size()
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Also, relocate `event->datalen = datalen;` to before calling
`memcpy(event->data, data, datalen);`, so that the __counted_by
annotation has effect, and flex-array member `data` can be properly
bounds-checked at run-time.
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ZSRzrIe0345eymk2@work
|
|
struct_size()
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ZSRXXvWMMkm7qqRW@work
|
|
Both usb_kill_urb() and usb_free_urb() do the NULL check itself, so there
is no need to duplicate it prior to calling.
Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231008025852.1239450-1-ruanjinjie@huawei.com
|
|
Add phylink capabilities for dsa_loop, which I believe being a software
construct means that it supports essentially all interface types and
all speeds.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add phylink capabilities for vsc73xx. Although this switch driver does
populates the .adjust_link method, dsa_slave_phy_setup() will still be
used to create phylink instances for the LAN ports, although phylink
won't be used for shared links.
There are two different classes of switch - 5+1 and 8 port. The 5+1
port switches uses port indicies 0-4 for the user interfaces and 6 for
the CPU port. The 8 port is confusing - some comments in the driver
imply that port index 7 is used, but the driver actually still uses 6,
so that is what we go with. Also, there appear to be no DTs in the
kernel tree that are using the 8 port variety.
It also looks like port 5 is always skipped.
The switch supports 10M, 100M and 1G speeds. It is not clear whether
all these speeds are supported on the CPU interface. It also looks like
symmetric pause is supported, whether asymmetric pause is as well is
unclear. However, it looks like the pause configuration is entirely
static, and doesn't depend on negotiation results.
So, let's do the best effort we can based on the information found in
the driver when creating vsc73xx_phylink_get_caps().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The switch statement in netvsc_send_completion() is incorrectly validating
the length of incoming network packets by falling through to the next case.
Avoid the fallthrough. Instead break after a case match and then process
the complete() call.
The current code has not caused any known failures. But nonetheless, the
code should be corrected as a different ordering of the switch cases might
cause a length check to fail when it should not.
Signed-off-by: Sonia Sharma <sonia.sharma@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update a comment because virtio-net now supports both
VIRTIO_NET_F_NOTF_COAL and VIRTIO_NET_F_VQ_NOTF_COAL.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the definition of virtqueue coalescing spec[1]:
Upon disabling and re-enabling a transmit virtqueue, the device MUST set
the coalescing parameters of the virtqueue to those configured through the
VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver did not set
any TX coalescing parameters, to 0.
Upon disabling and re-enabling a receive virtqueue, the device MUST set
the coalescing parameters of the virtqueue to those configured through the
VIRTIO_NET_CTRL_NOTF_COAL_RX_SET command, or, if the driver did not set
any RX coalescing parameters, to 0.
We need to add this setting for vq resize (ethtool -G) where vq_reset happens.
[1] https://lists.oasis-open.org/archives/virtio-dev/202303/msg00415.html
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the user sets a non-zero coalescing parameter to 0 for a specific
virtqueue, it does not work as expected, so let's fix this.
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using .set_coalesce interface to set all queue coalescing
parameters, we need to update both per-queue and global save values.
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since virtio-net allows switching napi_tx for per txq, we have to
get the specific txq's result now.
Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command")
Cc: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Background:
1. Commit 0c465be183c7 ("virtio_net: ethtool tx napi configuration") uses
tx-frames to toggle napi_tx (0 off and 1 on) if notification coalescing
is not supported.
2. Commit 31c03aef9bc2 ("virtio_net: enable napi_tx by default") enables
napi_tx for all txqs by default.
Status:
When virtio-net supports notification coalescing, after initialization,
tx-frames is 0 and napi_tx is true.
Problem:
When the user only wants to set rx coalescing params using
ethtool -C eth0 rx-usecs 10, or
ethtool -Q eth0 queue_mask 0x1 -C rx-usecs 10,
these cmds will carry tx-frames as 0, causing the napi_tx switching condition
is satisfied. Then the user gets:
netlink error: Device or resource busy.
The same happens when trying to set rx-frames, adaptive_rx, adaptive_tx...
How to fix:
When notification coalescing feature is negotiated, initially make the
value of tx-frames to be consistent with napi_tx.
For compatibility with the past, it is still supported to use tx-frames
to toggle napi_tx.
Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot has found an uninit-value bug triggered by the dm9601 driver [1].
This error happens because the variable res is not updated if the call
to dm_read_shared_word returns an error. In this particular case -EPROTO
was returned and res stayed uninitialized.
This can be avoided by checking the return value of dm_read_shared_word
and propagating the error if the read operation failed.
[1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955
Cc: stable@vger.kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver")
Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8365mb-c-v1-1-0537fe9fb08c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8366-core-c-v1-1-74e1b5190778@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-qca-qca8k-common-c-v1-1-34c8040e0f32@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-10-09
Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state
detection and wait behavior.
John Watts contributes a patch to only show the sun4i_can Kconfig
option on ARCH_SUNXI.
A patch by Miquel Raynal fixes the soft-reset workaround for Renesas
SoCs in the sja1000 driver.
Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver
fixes the id2 register for the tcan4553.
2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC.
* tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: Fix id2_register for tcan4553
can: flexcan: remove the auto stop mode for IMX93
can: sja1000: Always restart the Tx queue after an overrun
arm64: dts: imx93: add the Flex-CAN stop mode by GPR
can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
====================
Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the cops driver is removed, ipddp is now the only
CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users
and can be removed, making appletalk support purely based on ethertalk,
using ethernet hardware.
Link: https://lore.kernel.org/netdev/e490dd0c-a65d-4acf-89c6-c06cb48ec880@app.fastmail.com/
Link: https://lore.kernel.org/netdev/9cac4fbd-9557-b0b8-54fa-93f0290a6fb8@schmorgal.com/
Cc: Doug Brown <doug@schmorgal.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231009141139.1766345-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for the xen events driver:
Closing of an event channel in the Linux kernel can result in a
deadlock. This happens when the close is being performed in parallel
to an unrelated Xen console action and the handling of a Xen console
interrupt in an unprivileged guest.
The closing of an event channel is e.g. triggered by removal of a
paravirtual device on the other side. As this action will cause
console messages to be issued on the other side quite often, the
chance of triggering the deadlock is not negligible"
* tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: replace evtchn_rwlock with RCU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
