summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-15igc: allow BaseTime 0 enrollment for QbvTan Tee Min
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off. So this allow the BaseTime to enroll with zero value. Fixes: 61572d5f8f91 ("igc: Simplify TSN flags handling") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Add checking for basetime less than zeroMuhammad Husaini Zulkifli
Using the tc qdisc command, the user can set basetime to any value. Checking should be done on the driver's side to prevent registering basetime values that are less than zero. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Use strict cycles for Qbv schedulingVinicius Costa Gomes
Configuring strict cycle mode in the controller forces more well behaved transmissions when taprio is offloaded. When set this strict_cycle and strict_end, transmission is not enabled if the whole packet cannot be completed before end of the Qbv cycle. Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Enhance Qbv scheduling by using first flag bitVinicius Costa Gomes
The I225 hardware has a limitation that packets can only be scheduled in the [0, cycle-time] interval. So, scheduling a packet to the start of the next cycle doesn't usually work. To overcome this, we use the Transmit Descriptor first flag to indicates that a packet should be the first packet (from a queue) in a cycle according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle in Intel Discrete I225/6 User Manual. But this only works if there was any packet from that queue during the current cycle, to avoid this issue, we issue an empty packet if that's not the case. Also require one more descriptor to be available, to take into account the empty packet that might be issued. Test Setup: Talker: Use l2_tai to generate the launchtime into packet load. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Test Result: Before: 1666000610127300000,1666000610127300096,96,621273 1666000610127400000,1666000610127400192,192,621274 1666000610127500000,1666000610127500032,32,621275 1666000610127600000,1666000610127600128,128,621276 1666000610127700000,1666000610127700224,224,621277 1666000610127800000,1666000610127800064,64,621278 1666000610127900000,1666000610127900160,160,621279 1666000610128000000,1666000610128000000,0,621280 1666000610128100000,1666000610128100096,96,621281 1666000610128200000,1666000610128200192,192,621282 1666000610128300000,1666000610128300032,32,621283 1666000610128400000,1666000610128301056,-98944,621284 1666000610128500000,1666000610128302080,-197920,621285 1666000610128600000,1666000610128302848,-297152,621286 1666000610128700000,1666000610128303872,-396128,621287 1666000610128800000,1666000610128304896,-495104,621288 1666000610128900000,1666000610128305664,-594336,621289 1666000610129000000,1666000610128306688,-693312,621290 1666000610129100000,1666000610128307712,-792288,621291 1666000610129200000,1666000610128308480,-891520,621292 1666000610129300000,1666000610128309504,-990496,621293 1666000610129400000,1666000610128310528,-1089472,621294 1666000610129500000,1666000610128311296,-1188704,621295 1666000610129600000,1666000610128312320,-1287680,621296 1666000610129700000,1666000610128313344,-1386656,621297 1666000610129800000,1666000610128314112,-1485888,621298 1666000610129900000,1666000610128315136,-1584864,621299 1666000610130000000,1666000610128316160,-1683840,621300 1666000610130100000,1666000610128316928,-1783072,621301 1666000610130200000,1666000610128317952,-1882048,621302 1666000610130300000,1666000610128318976,-1981024,621303 1666000610130400000,1666000610128319744,-2080256,621304 1666000610130500000,1666000610128320768,-2179232,621305 1666000610130600000,1666000610128321792,-2278208,621306 1666000610130700000,1666000610128322816,-2377184,621307 1666000610130800000,1666000610128323584,-2476416,621308 1666000610130900000,1666000610128324608,-2575392,621309 1666000610131000000,1666000610128325632,-2674368,621310 1666000610131100000,1666000610128326400,-2773600,621311 1666000610131200000,1666000610128327424,-2872576,621312 1666000610131300000,1666000610128328448,-2971552,621313 1666000610131400000,1666000610128329216,-3070784,621314 1666000610131500000,1666000610131500032,32,621315 1666000610131600000,1666000610131600128,128,621316 1666000610131700000,1666000610131700224,224,621317 After: 1666073510646200000,1666073510646200064,64,2676462 1666073510646300000,1666073510646300160,160,2676463 1666073510646400000,1666073510646400256,256,2676464 1666073510646500000,1666073510646500096,96,2676465 1666073510646600000,1666073510646600192,192,2676466 1666073510646700000,1666073510646700032,32,2676467 1666073510646800000,1666073510646800128,128,2676468 1666073510646900000,1666073510646900224,224,2676469 1666073510647000000,1666073510647000064,64,2676470 1666073510647100000,1666073510647100160,160,2676471 1666073510647200000,1666073510647200256,256,2676472 1666073510647300000,1666073510647300096,96,2676473 1666073510647400000,1666073510647400192,192,2676474 1666073510647500000,1666073510647500032,32,2676475 1666073510647600000,1666073510647600128,128,2676476 1666073510647700000,1666073510647700224,224,2676477 1666073510647800000,1666073510647800064,64,2676478 1666073510647900000,1666073510647900160,160,2676479 1666073510648000000,1666073510648000000,0,2676480 1666073510648100000,1666073510648100096,96,2676481 1666073510648200000,1666073510648200192,192,2676482 1666073510648300000,1666073510648300032,32,2676483 1666073510648400000,1666073510648400128,128,2676484 1666073510648500000,1666073510648500224,224,2676485 1666073510648600000,1666073510648600064,64,2676486 1666073510648700000,1666073510648700160,160,2676487 1666073510648800000,1666073510648800000,0,2676488 1666073510648900000,1666073510648900096,96,2676489 1666073510649000000,1666073510649000192,192,2676490 1666073510649100000,1666073510649100032,32,2676491 1666073510649200000,1666073510649200128,128,2676492 1666073510649300000,1666073510649300224,224,2676493 1666073510649400000,1666073510649400064,64,2676494 1666073510649500000,1666073510649500160,160,2676495 1666073510649600000,1666073510649600000,0,2676496 1666073510649700000,1666073510649700096,96,2676497 1666073510649800000,1666073510649800192,192,2676498 1666073510649900000,1666073510649900032,32,2676499 1666073510650000000,1666073510650000128,128,2676500 Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Replace deprecated git://github.com link in MAINTAINERS (Palmer Dabbelt) - Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing) - Drop unnecessary buffer from ACPI call (Rafael Mendonca) - Correct latent missing include issue in iova-bitmap and fix support for unaligned bitmaps. Follow-up with better fix through refactor (Joao Martins) - Rework ccw mdev driver to split private data from parent structure, better aligning with the mdev lifecycle and allowing us to remove a temporary workaround (Eric Farman) - Add an interface to get an estimated migration data size for a device, allowing userspace to make informed decisions, ex. more accurately predicting VM downtime (Yishai Hadas) - Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas) - Simplify module and Kconfig through consolidating SPAPR/EEH code and config options and folding virqfd module into main vfio module (Jason Gunthorpe) - Fix error path from device_register() across all vfio mdev and sample drivers (Alex Williamson) - Define migration pre-copy interface and implement for vfio/mlx5 devices, allowing portions of the device state to be saved while the device continues operation, towards reducing the stop-copy state size (Jason Gunthorpe, Yishai Hadas, Shay Drory) - Implement pre-copy for hisi_acc devices (Shameer Kolothum) - Fixes to mdpy mdev driver remove path and error path on probe (Shang XiaoJing) - vfio/mlx5 fixes for incorrect return after copy_to_user() fault and incorrect buffer freeing (Dan Carpenter) * tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits) vfio/mlx5: error pointer dereference in error handling vfio/mlx5: fix error code in mlx5vf_precopy_ioctl() samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe() hisi_acc_vfio_pci: Enable PRE_COPY flag hisi_acc_vfio_pci: Move the dev compatibility tests for early check hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions hisi_acc_vfio_pci: Add support for precopy IOCTL vfio/mlx5: Enable MIGRATION_PRE_COPY flag vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error vfio/mlx5: Introduce multiple loads vfio/mlx5: Consider temporary end of stream as part of PRE_COPY vfio/mlx5: Introduce vfio precopy ioctl implementation vfio/mlx5: Introduce SW headers for migration states vfio/mlx5: Introduce device transitions of PRE_COPY vfio/mlx5: Refactor to use queue based data chunks vfio/mlx5: Refactor migration file state vfio/mlx5: Refactor MKEY usage vfio/mlx5: Refactor PD usage vfio/mlx5: Enforce a single SAVE command at a time vfio: Extend the device migration protocol with PRE_COPY ...
2022-12-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "ARM64: - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a97d: "Fix a number of issues with MTE, such as races on the tags being initialised vs the PG_mte_tagged flag as well as the lack of support for VM_SHARED when KVM is involved. Patches from Catalin Marinas and Peter Collingbourne"). - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. s390: - Second batch of the lazy destroy patches - First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function x86: - Allow compiling out SMM support - Cleanup and documentation of SMM state save area format - Preserve interrupt shadow in SMM state save area - Respond to generic signals during slow page faults - Fixes and optimizations for the non-executable huge page errata fix. - Reprogram all performance counters on PMU filter change - Cleanups to Hyper-V emulation and tests - Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest running on top of a L1 Hyper-V hypervisor) - Advertise several new Intel features - x86 Xen-for-KVM: - Allow the Xen runstate information to cross a page boundary - Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured - Add support for 32-bit guests in SCHEDOP_poll - Notable x86 fixes and cleanups: - One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). - Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. - Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. - Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. - Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. - Advertise (on AMD) that the SMM_CTL MSR is not supported - Remove unnecessary exports Generic: - Support for responding to signals during page faults; introduces new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks Selftests: - Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. - Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. - Introduce actual atomics for clear/set_bit() in selftests - Add support for pinning vCPUs in dirty_log_perf_test. - Rename the so called "perf_util" framework to "memstress". - Add a lightweight psuedo RNG for guest use, and use it to randomize the access pattern and write vs. read percentage in the memstress tests. - Add a common ucall implementation; code dedup and pre-work for running SEV (and beyond) guests in selftests. - Provide a common constructor and arch hook, which will eventually be used by x86 to automatically select the right hypercall (AMD vs. Intel). - A bunch of added/enabled/fixed selftests for ARM64, covering memslots, breakpoints, stage-2 faults and access tracking. - x86-specific selftest changes: - Clean up x86's page table management. - Clean up and enhance the "smaller maxphyaddr" test, and add a related test to cover generic emulation failure. - Clean up the nEPT support checks. - Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values. - Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). Documentation: - Remove deleted ioctls from documentation - Clean up the docs for the x86 MSR filter. - Various fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits) KVM: x86: Add proper ReST tables for userspace MSR exits/flags KVM: selftests: Allocate ucall pool from MEM_REGION_DATA KVM: arm64: selftests: Align VA space allocator with TTBR0 KVM: arm64: Fix benign bug with incorrect use of VA_BITS KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow KVM: x86: Advertise that the SMM_CTL MSR is not supported KVM: x86: remove unnecessary exports KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic" tools: KVM: selftests: Convert clear/set_bit() to actual atomics tools: Drop "atomic_" prefix from atomic test_and_set_bit() tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests perf tools: Use dedicated non-atomic clear/set bit helpers tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers KVM: arm64: selftests: Enable single-step without a "full" ucall() KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself KVM: Remove stale comment about KVM_REQ_UNHALT KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR KVM: Reference to kvm_userspace_memory_region in doc and comments KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl ...
2022-12-15x86_64: Remove pointless set_64bit() usagePeter Zijlstra
The use of set_64bit() in X86_64 only code is pretty pointless, seeing how it's a direct assignment. Remove all this nonsense. [nathanchance: unbreak irte] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221022114425.168036718%40infradead.org
2022-12-15mm: Introduce set_memory_rox()Peter Zijlstra
Because endlessly repeating: set_memory_ro() set_memory_x() is getting tedious. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Y1jek64pXOsougmz@hirez.programming.kicks-ass.net
2022-12-15Merge tag 'acpi-6.2-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix an AML byte code execution issue in ACPICA and two issues in the ACPI EC driver which requires rearranging ACPICA code. Specifics: - Avoid trying to resolve operands in AML when there are none (Amadeusz Sławiński) - Fix indentation in include/acpi/acpixf.h to help applying patches from the upstream ACPICA git (Hans de Goede) - Make it possible to install an address space handler without evaluating _REG for Operation Regions in the given address space (Hans de Goede) - Defer the evaluation of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() gets called for it (Hans de Goede) - Fix EC address space handler unregistration (Hans de Goede)" * tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: Fix ECDT probe ordering issues ACPI: EC: Fix EC address space handler unregistration ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps ACPICA: include/acpi/acpixf.h: Fix indentation ACPICA: Fix operand resolution
2022-12-15Merge tag 'thermal-6.2-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "These are updates of assorted thermal drivers, mostly for ARM platforms, generally isolated and fairly straightforward, and the recent Intel HFI driver fix for systems without HFI support. Specifics: - Avoid clearing the HFI status bit on systems without HFI support which triggers unchecked MSR access errors (Srinivas Pandruvada) - Add sm8450 and sm8550 QCom compatible string to DT bindings (Luca Weiss, Neil Armstrong) - Use devm_platform_get_and_ioremap_resource on the ST platform to group two calls into a single one (Minghao Chi) - Use GENMASK instead of bitmaps and validate the temperature after reading it in the imx8mm_thermal driver (Marcus Folkesson) - Convert generic-adc-thermal to DT schema (Rob Herring) - Fix debug print message with inverted logic in the k3_j72xx_bandgap driver (Keerthy) - Fix memory leak on thermal_of_zone_register() failure (Ido Schimmel) - Add support for IPQ8074 in the tsens thermal driver along with the DT bindings (Robert Marko) - Fix and rework the debugfs code in the tsens driver (Christian Marangi) - Add calibration and DT documentation for the imx8mm driver (Marek Vasut) - Add DT bindings and compatible for the Mediatek SoCs mt7981 and mt7983 (Daniel Golle) - Don't show an error message if it happens at probe time while it will be deferred on the QCom SPMI ADC driver (Johan Hovold) - Add HWMon support for the imx8mm board (Alexander Stein) - Remove pointless include from the power allocator governor (Christophe JAILLET) - Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450 (Krzysztof Kozlowski) - Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss) - Demote error log of thermal zone register to debug in the tsens QCom driver (Manivannan Sadhasivam) - Consolidate the the efuse values and the errata handling in the TI Bandgap driver (Bryan Brattlof) - Document Renesas RZ/Five as compatible with RZ/G2UL in the DT bindings (Lad Prabhakar) - Fix the irq handler return value in the LMh driver (Bjorn Andersson) - Delete empty platform remove callback from imx_sc_thermal (Uwe Kleine-König)" * tag 'thermal-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) thermal/drivers/imx_sc_thermal: Drop empty platform remove function thermal/drivers/qcom/lmh: Fix irq handler return value dt-bindings: thermal: qcom-tsens: Add compatible for sm8550 thermal/drivers/st: Use devm_platform_get_and_ioremap_resource() dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range dt-bindings: thermal: k3-j72xx: elaborate on binding description thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp() function thermal/drivers/qcom: Demote error log of thermal zone register to debug thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2 dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP, SM6350 and SM8450 thermal/core/power allocator: Remove a useless include thermal/drivers/imx8mm: Add hwmon support thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message dt-bindings: thermal: mediatek: add compatible string for MT7986 and MT7981 SoC thermal: ti-soc-thermal: Drop comma after SoC match table sentinel thermal/drivers/imx: Add support for loading calibration data from OCOTP ...
2022-12-15drm/i915/dg2: Return Wa_22012654132 to just specific steppingsMatt Roper
Programming of the ENABLE_PREFETCH_INTO_IC bit originally showed up in both the general DG2 tuning guide (applicable to all DG2 variants/steppings) and under Wa_22012654132 (applicable only to specific steppings). It has now been removed from the tuning guide, and the guidance is to only program it in the specific steppings associated with the workaround. Bspec: 68331 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221213234119.2963317-1-matthew.d.roper@intel.com
2022-12-15Merge tag 'gpio-updates-for-v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have a new GPIO multiplexer driver, bunch of driver updates and refactoring in the core GPIO library. GPIO core: - teach gpiolib to work with software nodes for HW description - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on the number of GPIOS since the allocation became entirely dynamic - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC controller, Freescale PCIe and Ethernet controller, Himax LCDs and Mediatek mt2701 - refactor OF quirk code - some general refactoring of the OF and ACPI code, adding new helpers, minor tweaks and fixes, making fwnode usage consistent etc. GPIO uAPI: - fix an issue where the user-space can trigger a NULL-pointer dereference in the kernel by opening a device file, forcing a driver unbind and then calling one of the syscalls on the associated file descriptor New drivers: - add gpio-latch: a new GPIO multiplexer based on latches connected to other GPIOs Driver updates: - convert i2c GPIO expanders to using .probe_new() - drop the gpio-sta2x11 driver - factor out common code for the ACCES IDIO-16 family of controllers and use this new library wherever applicable in drivers - add DT support to gpio-hisi - allow building gpio-davinci as a module and increase its maxItems property - add support for a new model to gpio-pca9570 - other minor changes to various drivers" * tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits) gpio: sim: set a limit on the number of GPIOs gpiolib: protect the GPIO device against being dropped while in use by user-space gpiolib: cdev: fix NULL-pointer dereferences gpiolib: Provide to_gpio_device() helper gpiolib: Unify access to the device properties gpio: Do not include <linux/kernel.h> when not really needed. gpio: pcf857x: Convert to i2c's .probe_new() gpio: pca953x: Convert to i2c's .probe_new() gpio: max732x: Convert to i2c's .probe_new() dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names gpiolib: ensure that fwnode is properly set gpio: sl28cpld: Replace irqchip mask_invert with unmask_base gpiolib: of: Use correct fwnode for DT-probed chips gpiolib: of: Drop redundant check in of_mm_gpiochip_remove() gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode gpiolib: add support for software nodes gpiolib: consolidate GPIO lookups gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes gpiolib: acpi: change acpi_find_gpio() to accept firmware node ...
2022-12-15Merge branch 'acpi-ec'Rafael J. Wysocki
Merge additional ACPI EC driver fixes for 6.2-rc1: - Fix EC address space handler unregistration (Hans de Goede). - Defer the evaluation of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() gets called for it (Hans de Goede). * acpi-ec: ACPI: EC: Fix ECDT probe ordering issues ACPI: EC: Fix EC address space handler unregistration
2022-12-15Merge tag 'fbdev-for-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "The most relevant change are the patches from Dmitry Torokhov to switch omapfb to the gpiod API. The other patches are small and fix e.g. UML build issues, improve the error paths and cleanup code" * tag 'fbdev-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits) fbdev: fbcon: release buffer when fbcon_do_set_font() failed fbdev: sh_mobile_lcdcfb: use sysfs_emit() to instead of scnprintf() fbdev: uvesafb: use sysfs_emit() to instead of scnprintf() fbdev: uvesafb: Simplify uvesafb_remove() fbdev: uvesafb: Fixes an error handling path in uvesafb_probe() fbdev: uvesafb: don't build on UML fbdev: geode: don't build on UML fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe() fbdev: matroxfb: Convert to i2c's .probe_new() fbdev: da8xx-fb: add missing regulator_disable() in fb_probe fbdev: controlfb: fix spelling mistake "paramaters"->"parameters" fbdev: vermilion: decrease reference count in error path fbdev: smscufx: fix error handling code in ufx_usb_probe fbdev: via: Fix error in via_core_init() fbdev: pm2fb: fix missing pci_disable_device() fbdev: pxafb: Remove unnecessary print function dev_err() fbdev: omapfb: panel-sharp-ls037v7dw01: fix included headers fbdev: omapfb: panel-tpo-td028ttec1: stop including gpio.h fbdev: omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling fbdev: omapfb: encoder-opa362: fix included headers ...
2022-12-15Merge branch 'acpica'Rafael J. Wysocki
Merge additional ACPICA changes for 6.2-rc1: - Avoid trying to resolve operands in AML when there are none (Amadeusz Sławiński). - Fix indentation in include/acpi/acpixf.h to help applying patches from the upstream ACPICA git (Hans de Goede). - Make it possible to install an address space handler without evaluating _REG for Operation Regions in the given address space (Hans de Goede). * acpica: ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps ACPICA: include/acpi/acpixf.h: Fix indentation ACPICA: Fix operand resolution
2022-12-15drm/amdgpu: Add poison mode query for df v4_3Candice Li
Add poison mode query support on df v4_3. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: Add df v4_3 headersCandice Li
Add df v4_3 header files. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: bump minor version number for DEV_INFO and SENSOR IOCTLs updateEvan Quan
Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock. And update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock. User applications can better utilize these IOCTLs to get needed informations. Increase the minor version number to indicate that the new flags are available. Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: expose the minimum shader/memory clock frequencyEvan Quan
Otherwise, some UMD tools will treate them as 0 at default while actually they are not. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: expose peak profiling mode shader/memory clocksEvan Quan
Expose those informations to UMD who need them as for standard profiling mode. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/pm: fulfill powerplay peak profiling mode shader/memory clock settingsEvan Quan
Enable peak profiling mode shader/memory clock reporting for powerplay framework. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/pm: fulfill swsmu peak profiling mode shader/memory clock settingsEvan Quan
Enable peak profiling mode shader/memory clocks reporting for swsmu framework. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/pm: drop unused SMU v13 APIEvan Quan
The API is not in use. And it's unlikely to be used in the future either. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/radeon: Replace 1-element arrays with flexible-array membersPaulo Miguel Almeida
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_DISPLAY_OBJECT_PATH, _ATOM_DISPLAY_OBJECT_PATH_TABLE, _ATOM_OBJECT_TABLE, GOP_VBIOS_CONTENT _ATOM_GPIO_VOLTAGE_OBJECT_V3 and refactor the rest of the code accordingly. It's worth mentioning that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/239 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: define RAS query poison mode functionTao Zhou
1. no need to query poison mode on SRIOV guest side, host can handle it. 2. define the function to simplify code. v2: rename amdgpu_ras_poison_mode_query to amdgpu_ras_query_poison_mode. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: update VCN/JPEG RAS settingTao Zhou
Support VCN/JPEG RAS in both bare metal and SRIOV environment. v2: update commit description. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: skip RAS error injection in SRIOVTao Zhou
Injection on guest is not allowed. v2: return directly in SRIOV environment. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: add VCN poison consumption handler for SRIOVTao Zhou
Inform host and let host handle consumption interrupt. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: add RAS poison consumption handler for SRIOVTao Zhou
Send message to PF if VF receives RAS poison consumption interrupt. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: add RAS poison consumption handler for NV SRIOVTao Zhou
Send handling request to host. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amdgpu: add RAS poison consumption handler for AI SRIOVTao Zhou
Send message to host and host will handle it. v2: split the patch into two parts, one is for mxgpu ai and another one is for common poison consumption handler. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Block FPO / SubVP (DRR) on HDMI VRR configsAlvin Lee
[Description] - Current policy does not support HDMI VRR by default, so we cannot enable FPO / SubVP (DRR) cases Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: 3.2.216Aric Cyr
This version brings along following fixes: -Fix array index out of bound error -Speed up DML fast vadlaite -Implement multiple secure display -MST HDCP for multiple display -Add DPIA notification -Add support for three new square pattern variant Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Demote Error Level When ODM Transition SupportedFangzhi Zuo
[Why && How] On dcn32, HW supports odm transition in fast update. Hence this error message is considered false positive. Downgrade the error level to avoid catching unnecessary attention. Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: add support for three new square pattern variants from ↵Wenjing Liu
DP2.1 specs [why] DP2.1 specs has brought 3 new variants of sqaure patterns with different pre-shoot and de-emphasis equalization requirements. The commit adds logic to identify these variants and apply corresponding eqaulization requirements into hardware lane settings. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: run subvp validation with supported vlevelDillon Varone
[WHY] Subvp portion validation currently assumes that if vlevel provided does not support pstate, then none will, and so subvp is not used. [HOW] After get vlevel, use lowest vlevel that supports pstate if it exists, and use that for subvp validation. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Check for PSR in no memory request caseSamson Tam
[Why] When we have a PSR display, we will not be requesting data from memory anymore. So we report back true for no memory request case. [How] Check for PSR by checking PSR version in link settings Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Clear link res when merging a pipe splitAlvin Lee
[Description] - When merging a pipe that was previously pipe split, we need to also clear the link resources or the next stream/plane that uses the pipe may have an incorrect link resource state Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Add DPIA NOTIFICATION logicMustapha Ghaddar
[WHY] Adding the new DPIA NOTIFY packets from DMUB As per the design with Cruise to account for 250ms response delay otherwise [HOW] Added th DPIA NOTIFY logic as per DMUB logic Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Clear MST topology if it fails to resumeRoman Li
[Why] In case of failure to resume MST topology after suspend, an emtpty mst tree prevents further mst hub detection on the same connector. That causes the issue with MST hub hotplug after it's been unplug in suspend. [How] Stop topology manager on the connector after detecting DM_MST failure. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: use encoder type independent hwss instead of accessing enc ↵Wenjing Liu
directly [why] in dc_link_dp there still exist a few places where we call dio encoders without checking current enabled encoder type. The change is to make these places to call hwss equivalent functions so it won't mistakenly program a wrong type encoder. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Revert Scaler HCBlank issue workaroundLeo (Hanghong) Ma
Workaround no longer needed. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Fix potential null-deref in dm_resumeRoman Li
[Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h ↵Ian Chen
write [WHY] It causes regression AMD source will not write DPCD 340. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Block subvp if center timing is in useAlvin Lee
[Description] - FW scheduling algorithm doesn't take into account of it's a center timing - This affects where the subvp mclk switch can be scheduled (prevents HUBP vline interrupt from coming in if scheduled incorrectly) - Block subvp center timing cases for now Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Reduce expected sdp bandwidth for dcn321Dillon Varone
[Description] Modify soc BB to reduce expected sdp bandwidth and align with measurements to fix underflow issues. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Add debug bit to disable unbounded requestingDillon Varone
[Description] Add debug bit to disable unbounded requesting. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Speed up DML fast_validate pathIlya Bakoulin
[Why] Iterating over every voltage state when we need to validate thousands of configurations all at once (i.e. display hotplug) can take a significant amount of time. [How] Check just the highest voltage state when fast_validate is true to verify whether the configuration can work at all, then do a proper validation including all voltage states later when fast_validate is false. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Fix when disabling secure_displayAlan Liu
[Why] Fix problems when we disable secure_display. [How] - Reset secure display context after disabled - A secure_display_context is dedicate to a crtc, so we set the crtc for it when we create the context. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15Revert "drm/amd/display: correct static_screen_event_mask"Charlene Liu
This reverts commit c800d9ff8cdec57778ab21f4d933a25f41f44738. [why] revert for now because this change exposed other issue. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-22 06:19:44 +0000