| Age | Commit message (Collapse) | Author |
|---|
|
del_mtd_device() will call of_node_put() to mtd_get_of_node(mtd), which
is mtd->dev.of_node. However, memset(&mtd->dev, 0) is called before
of_node_put(). As the result, of_node_put() won't do anything in
del_mtd_device(), and causes the refcount leak.
del_mtd_device()
memset(&mtd->dev, 0, sizeof(mtd->dev) # clear mtd->dev
of_node_put()
mtd_get_of_node(mtd) # mtd->dev is cleared, can't locate of_node
# of_node_put(NULL) won't do anything
Fix the error by caching the pointer of the device_node.
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /spi/spi-sram@0
CPU: 3 PID: 275 Comm: python3 Tainted: G N 6.1.0-rc3+ #54
0d8a1edddf51f172ff5226989a7565c6313b08e2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x67/0x83
kobject_get+0x155/0x160
of_node_get+0x1f/0x30
of_fwnode_get+0x43/0x70
fwnode_handle_get+0x54/0x80
fwnode_get_nth_parent+0xc9/0xe0
fwnode_full_name_string+0x3f/0xa0
device_node_string+0x30f/0x750
pointer+0x598/0x7a0
vsnprintf+0x62d/0x9b0
...
cfs_overlay_release+0x30/0x90
config_item_release+0xbe/0x1a0
config_item_put+0x5e/0x80
configfs_rmdir+0x3bd/0x540
vfs_rmdir+0x18c/0x320
do_rmdir+0x198/0x330
__x64_sys_rmdir+0x2c/0x40
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 00596576a051 ("mtd: core: clear out unregistered devices a bit more")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
[<miquel.raynal@bootlin.com>: Light reword of the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119063915.11108-1-shangxiaojing@huawei.com
|
|
Introduce Socionext F_OSPI controller driver. This controller is used to
communicate with slave devices such as SPI Flash memories. It supports
4 slave devices and up to 8-bit wide bus, but supports master mode only.
This driver uses spi-mem framework for SPI flash memory access, and
can only operate indirect access mode and single data rate mode.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221124003351.7792-3-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because of the possible failure of devm_kzalloc(), name might be NULL and
will cause null pointer dereference later.
Therefore, it might be better to check it and directly return -ENOMEM.
Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
[claudiu.beznea: s/refrence/reference/, s/possilble/possible]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221119054858.178629-1-tanghui20@huawei.com
|
|
The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.
Fixes: 46b903a01c05 ("net, thunder, bgx: Add support to get MAC address from ACPI.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_get_device() will decrease the reference count for the *from*
parameter. So we don't need to call put_device() to decrease the
reference. Let's remove the put_device() in the loop and only decrease
the reference count of the returned 'pdev' for the last loop because it
will not be passed to pci_get_device() as input parameter. We don't need
to check if 'pdev' is NULL because it is already checked inside
pci_dev_put(). Also add pci_dev_put() for the error path.
Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/20221123065919.31499-1-wangxiongfeng2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Call phylink_disconnect_phy() in tse_shutdown() to release the
resources occupied by phylink_of_phy_connect() in the tse_open().
Fixes: fef2998203e1 ("net: altera: tse: convert to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221123011617.332302-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When doing the following test steps, an error was found:
step 1: modprobe virtio_net succeeded
# modprobe virtio_net <-- OK
step 2: fault injection in register_netdevice()
# modprobe -r virtio_net <-- OK
# ...
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 3521 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
...
should_failslab+0xa/0x20
...
dev_set_name+0xc0/0x100
netdev_register_kobject+0xc2/0x340
register_netdevice+0xbb9/0x1320
virtnet_probe+0x1d72/0x2658 [virtio_net]
...
</TASK>
virtio_net: probe of virtio0 failed with error -22
step 3: modprobe virtio_net failed
# modprobe virtio_net <-- failed
virtio_net: probe of virtio0 failed with error -2
The root cause of the problem is that the queues are not
disable on the error handling path when register_netdevice()
fails in virtnet_probe(), resulting in an error "-ENOENT"
returned in the next modprobe call in setup_vq().
virtio_pci_modern_device uses virtqueues to send or
receive message, and "queue_enable" records whether the
queues are available. In vp_modern_find_vqs(), all queues
will be selected and activated, but once queues are enabled
there is no way to go back except reset.
Fix it by reset virtio device on error handling path. This
makes error handling follow the same order as normal device
cleanup in virtnet_remove() which does: unregister, destroy
failover, then reset. And that flow is better tested than
error handling so we can be reasonably sure it works well.
Fixes: 024655555021 ("virtio_net: fix use after free on allocation failure")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20221122150046.3910638-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently offloading MACsec with authentication only (encrypt
property set to off) is not supported, block such requests
when adding/updating a macsec device.
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently during update Tx security association (SA) flow, the Tx SA
active state is updated only if the Tx SA in question is the same SA
that the MACsec interface is using for Tx,in consequence when the
MACsec interface chose to work with this Tx SA later, where this SA
for example should have been updated to active state and it was not,
the relevant Tx SA HW context won't be installed, hence the MACSec
flow won't be offloaded.
Fix by update Tx SA active state as part of update flow regardless
whether the SA in question is the same Tx SA used by the MACsec
interface.
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently offload path limits replay window size to 32/64/128/256 bits,
such a limitation should not exist since software allows it.
Remove such limitation.
Fixes: eb43846b43c3 ("net/mlx5e: Support MACsec offload replay window")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently MACsec's add Rx SA flow steering (fs) rule routine
uses a spec object which is dynamically allocated and do
not free it upon leaving. The above led to a memory leak.
Fix by freeing dynamically allocated objects.
Fixes: 3b20949cb21b ("net/mlx5e: Add MACsec RX steering rules")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix update Rx SA wrong bail condition, naturally update functionality
needs to check that something changed otherwise bailout currently the
active state check does just the opposite, furthermore unlike deactivate
path which remove the macsec rules to deactivate the offload, the
activation path does not include the counter part installation of the
macsec rules.
Fix by using correct bailout condition and when Rx SA changes state to
active then add the relevant macsec rules.
While at it, refine function name to reflect more precisely its role.
Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The main functionality for this operation is to update the
active state of the Rx security channel (SC) if the new
active setting is different from the current active state
of this Rx SC, however the relevant active state check is
done post updating the current active state to match the
new active state, effectively blocks any offload state
update for the Rx SC in question.
Fix by delay the assignment to be post the relevant check.
Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When the MACsec netdevice is deleted, all related Rx/Tx HW/SW
states should be released/deallocated, however currently part
of the Rx security channel association data is not cleaned
properly, hence the memory leaks.
Fix by make sure all related Rx Sc resources are cleaned/freed,
while at it improve code by grouping release SC context in a
function so it can be used in both delete MACsec device and
delete Rx SC operations.
Fixes: 5a39816a75e5 ("net/mlx5e: Add MACsec offload SecY support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently the data path metadata flow id mask wrongly limits the
number of different RX security channels (SC) to 16, whereas in
adding RX SC the limit is "2^16 - 1" this cause an overlap in
metadata flow id once more than 16 RX SCs is added, this corrupts
MACsec RX offloaded flow handling.
Fix by using the correct mask, while at it improve code to use this
mask when adding the Rx rule and improve visibility of such errors
by adding debug massage.
Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
'accel_tcp' is allocated by kvzalloc(), which should freed by kvfree().
Fixes: f52f2faee581 ("net/mlx5e: Introduce flow steering API")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If kvzalloc() fails then return -ENOMEM. Don't return success.
Fixes: 3b20949cb21b ("net/mlx5e: Add MACsec RX steering rules")
Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When having multiple dests with termination tables and second one
or afterwards fails the driver reverts usage of term tables but
doesn't reset the assignment in attr->dests[num_vport_dests].termtbl
which case a use-after-free when releasing the rule.
Fix by resetting the assignment of termtbl to null.
Fixes: 10caabdaad5a ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If sscanf() return 0, outlen is uninitialized and used in kzalloc(),
this is unexpected. We should return -EINVAL if the string is invalid.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If creating bond first and then enabling sriov in switchdev mode,
will hit the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:778:(pid 25543): CREATE_LAG(0x840) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x7d49cb), err(-22)
The reason is because the offending patch removes eswitch mode
none. In vf lag, the checking of eswitch mode none is replaced
by checking if sriov is enabled. But when driver enables sriov,
it triggers the bond workqueue task first and then setting sriov
number in pci_enable_sriov(). So the check fails.
Fix it by checking if sriov is enabled using eswitch internal
counter that is set before triggering the bond workqueue task.
Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit removes eswitch mode none. But when disabling
sriov in legacy mode or changing from switchdev to legacy mode
without sriov enabled, the legacy fdb table is not destroyed.
It is not the right behavior. Destroy legacy fdb table in above
two caes.
Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Smatch warns this:
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_table.c:81
mlx5dr_table_set_miss_action() error: uninitialized symbol 'ret'.
Initializing ret with -EOPNOTSUPP and fix missing action case.
Fixes: 7838e1725394 ("net/mlx5: DR, Expose steering table functionality")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There is no need for head_32.S and head_64.S both declaring a copy of
the global 'image_offset' variable, so drop those and make the extern C
declaration the definition.
When image_offset is moved to the .c file, it needs to be placed
particularly in the .data section because it lands by default in the
.bss section which is cleared too late, in .Lrelocated, before the first
access to it and thus garbage gets read, leading to SEV guests exploding
in early boot.
This happens only when the SEV guest kernel is loaded through grub. If
supplied with qemu's -kernel command line option, that memory is always
cleared upfront by qemu and all is fine there.
[ bp: Expand commit message with SEV aspect. ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-8-ardb@kernel.org
|
|
The ACPI buffer memory (buffer.pointer) should be freed as the
buffer is not used after acpi_evaluate_object(), free it to
prevent memory leak.
Fixes: 13e920d93e37 ("net: wwan: t7xx: Add core components")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669119580-28977-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20221122055449.31247-1-jiasheng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Qcom CPUFreq hardware (EPSS/OSM) controls clock and voltage to the CPU
cores. But this relationship is not represented with the clk framework
so far.
So, let's make the qcom-cpufreq-hw driver a clock provider. This makes the
clock producer/consumer relationship cleaner and is also useful for CPU
related frameworks like OPP to know the frequency at which the CPUs are
running.
The clock frequency provided by the driver is for each frequency domain.
We cannot get the frequency of each CPU core because, not all platforms
support per-core DCVS feature.
Also the frequency supplied by the driver is the actual frequency that
comes out of the EPSS/OSM block after the DCVS operation. This frequency is
not same as what the CPUFreq framework has set but it is the one that gets
supplied to the CPUs after throttling by LMh.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Xiu: Fixed memleak. ]
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In the blamed commit, a rudimentary reallocation procedure for RX buffer
descriptors was implemented, for the situation when their format changes
between normal (no PTP) and extended (PTP).
enetc_hwtstamp_set() calls enetc_close() and enetc_open() in a sequence,
and this sequence loses information which was previously configured in
the TX BDR Mode Register, specifically via the enetc_set_bdr_prio() call.
The TX ring priority is configured by tc-mqprio and tc-taprio, and
affects important things for TSN such as the TX time of packets. The
issue manifests itself most visibly by the fact that isochron --txtime
reports premature packet transmissions when PTP is first enabled on an
enetc interface.
Save the TX ring priority in a new field in struct enetc_bdr (occupies a
2 byte hole on arm64) in order to make this survive a ring reconfiguration.
Fixes: 434cebabd3a2 ("enetc: Add dynamic allocation of extended Rx BD rings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221122130936.1704151-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.
Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
prestera_port_create()
If prestera_port_sfp_bind() fails, unregister_netdev() should be called
in error handling path.
Compile tested only.
Fixes: 52323ef75414 ("net: marvell: prestera: add phylink support")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/1669115432-36841-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seems intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.
To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as validation checks are
moved ahead of memory allocation.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Error path does not free previously allocated memory. Add devm_kfree() to
the failure path.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Either ublk_can_use_task_work() is true or not, io commands are
forwarded to ublk server in reverse order, since llist_add() is
always to add one element to the head of the list.
Even though block layer doesn't guarantee request dispatch order,
requests should be sent to hardware in the sequence order generated
from io scheduler, which usually considers the request's LBA, and
order is often important for HDD.
So forward io commands in the sequence made from io scheduler by
aligning task work with current io_uring command's batch handling,
and it has been observed that both can get similar performance data
if IORING_SETUP_COOP_TASKRUN is set from ublk server.
Reported-by: Andreas Hindborg <andreas.hindborg@wdc.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221121155645.396272-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.2
1. Fixup of dpi and hdmi
2. Move panel connector to head
3. Add MT8188 dpi support
4. Add MT8195 AFBC support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123234855.2485-1-chunkuang.hu@kernel.org
|
|
Kconfig fix for RZ/G2L DSI
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3wYk/Bn/qVa9ha0@pendragon.ideasonboard.com
|
|
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20221113202428.889624434@linutronix.de
|
|
Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20221113202428.826924043@linutronix.de
|
|
Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221113202428.760225831@linutronix.de
|
|
Neither dprc-driver.c nor fsl-mc-bus.c need anything from linux/msi.h.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221113202428.511591041@linutronix.de
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
