summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-03drm/bridge: it6505: fix HDCP encryption when R0 readyHermes Wu
When starting HDCP authentication, HDCP encryption should be enabled when R0'is checked. Change encryption enables time at R0' ready. The hardware HDCP engine trigger is changed and the repeater KSV fails will restart HDCP. Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com
2025-01-03drm/bridge: it6505: fix HDCP Bstatus checkHermes Wu
When HDCP is activated, a DisplayPort source receiving CP_IRQ from the sink shall check Bstatus from DPCD and process the corresponding value Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com
2025-01-03drm/bridge: it6505: Change definition MAX_HDCP_DOWN_STREAM_COUNTHermes Wu
A HDCP source device shall support max downstream to 127 devices. Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127 KSVs shall save for DRM blocked devices check. This results in struct it6505 growth by ~0.5 KiB. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com
2025-01-03drm/bridge: it6505: add AUX operation for HDCP KSV list readHermes Wu
HDCP KSV list readback can choose to use AUX FIFO or general data register. For some DisplayPort devices, the KSV list must be read in 5 byte boundaries. The original AUX read command does not support these devices. The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0] as AUX operacion control, and b[7:4] are status bits and read only. To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using the data registers to using AUX FIFO. The extended command "CMD_AUX_GET_KSV_LIST" is added as "CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-3-e0fdd4844703@ite.corp-partner.google.com
2025-01-03drm/bridge: it6505: improve AUX operation for edid readHermes Wu
The original AUX operation using data registers is limited to 4 bytes. The AUX operation command CMD_AUX_I2C_EDID_READ uses AUX FIFO and is capable of reading 16 bytes. This improves the speed of EDID read. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-2-e0fdd4844703@ite.corp-partner.google.com
2025-01-03drm/bridge: it6505: Change definition of AUX_FIFO_MAX_SIZEHermes Wu
The hardware AUX FIFO is 16 bytes Change definition of AUX_FIFO_MAX_SIZE to 16 Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-1-e0fdd4844703@ite.corp-partner.google.com
2025-01-03Merge tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Happy New Year. It was fairly quiet for holidays period, certainly nothing that worth getting off the couch before I needed to, this is for the past two weeks, i915, xe and some adv7511, I expect we will see some amdgpu etc happening next week, but otherwise all quiet. i915: - Fix C10 pll programming sequence [cx0_phy] - Fix power gate sequence. [dg1] xe: - uapi: Revert some devcoredump file format changes breaking a mesa debug tool - Fixes around waits when moving to system - Fix a typo when checking for LMEM provisioning - Fix a fault on fd close after unbind - A couple of OA fixes squashed for stable backporting adv7511: - fix UAF - drop single lane support - audio infoframe fix" * tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel: xe/oa: Fix query mode of operation for OAR/OAC drm/i915/dg1: Fix power gate sequence. drm/i915/cx0_phy: Fix C10 pll programming sequence drm/xe: Fix fault on fd close after unbind drm/xe/pf: Use correct function to check LMEM provisioning drm/xe: Wait for migration job before unmapping pages drm/xe: Use non-interruptible wait when moving BO to system drm/xe: Revert some changes that break a mesa debug tool drm: adv7511: Drop dsi single lane support dt-bindings: display: adi,adv7533: Drop single lane support drm: adv7511: Fix use-after-free in adv7533_attach_dsi() drm/bridge: adv7511_audio: Update Audio InfoFrame properly
2025-01-03drm: Use of_property_present() for non-boolean propertiesRob Herring (Arm)
The use of of_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2025-01-03gpio: sim: lock up configfs that an instantiated device depends onKoichiro Den
Once a sim device is instantiated and actively used, allowing rmdir for its configfs serves no purpose and can be confusing. Effectively, arbitrary users start depending on its existence. Make the subsystem itself depend on the configfs entry for a sim device while it is in active use. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250103141829.430662-5-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-03gpio: virtuser: lock up configfs that an instantiated device depends onKoichiro Den
Once a virtuser device is instantiated and actively used, allowing rmdir for its configfs serves no purpose and can be confusing. Userspace interacts with the virtual consumer at arbitrary times, meaning it depends on its existence. Make the subsystem itself depend on the configfs entry for a virtuser device while it is in active use. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250103141829.430662-4-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-03gpio: virtuser: fix handling of multiple conn_ids in lookup tableKoichiro Den
Creating a virtuser device via configfs with multiple conn_ids fails due to incorrect indexing of lookup entries. Correct the indexing logic to ensure proper functionality when multiple gpio_virtuser_lookup are created. Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250103141829.430662-3-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-03gpio: virtuser: fix missing lookup table cleanupsKoichiro Den
When a virtuser device is created via configfs and the probe fails due to an incorrect lookup table, the table is not removed. This prevents subsequent probe attempts from succeeding, even if the issue is corrected, unless the device is released. Additionally, cleanup is also needed in the less likely case of platform_device_register_full() failure. Besides, a consistent memory leak in lookup_table->dev_id was spotted using kmemleak by toggling the live state between 0 and 1 with a correct lookup table. Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the existing gpio_virtuser_make_lookup_table() and call it from all necessary points to ensure proper cleanup. Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250103141829.430662-2-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-03dm-verity FEC: Avoid copying RS parity bytes twice.Milan Broz
Caching RS parity bytes is already done in fec_decode_bufs() now, no need to use yet another buffer for conversion to uint16_t. This patch removes that double copy of RS parity bytes. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-03dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)Milan Broz
This patch fixes an issue that was fixed in the commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") but later broken again in the commit 8ca7cab82bda ("dm verity fec: fix misaligned RS roots IO") If the Reed-Solomon roots setting spans multiple blocks, the code does not use proper parity bytes and randomly fails to repair even trivial errors. This bug cannot happen if the sector size is multiple of RS roots setting (Android case with roots 2). The previous solution was to find a dm-bufio block size that is multiple of the device sector size and roots size. Unfortunately, the optimization in commit 8ca7cab82bda ("dm verity fec: fix misaligned RS roots IO") is incorrect and uses data block size for some roots (for example, it uses 4096 block size for roots = 20). This patch uses a different approach: - It always uses a configured data block size for dm-bufio to avoid possible misaligned IOs. - and it caches the processed parity bytes, so it can join it if it spans two blocks. As the RS calculation is called only if an error is detected and the process is computationally intensive, copying a few more bytes should not introduce performance issues. The issue was reported to cryptsetup with trivial reproducer https://gitlab.com/cryptsetup/cryptsetup/-/issues/923 Reproducer (with roots=20): # create verity device with RS FEC dd if=/dev/urandom of=data.img bs=4096 count=8 status=none veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=20 | \ awk '/^Root hash/{ print $3 }' >roothash # create an erasure that should always be repairable with this roots setting dd if=/dev/zero of=data.img conv=notrunc bs=1 count=4 seek=4 status=none # try to read it through dm-verity veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=20 $(cat roothash) dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer Even now the log says it cannot repair it: : verity-fec: 7:1: FEC 0: failed to correct: -74 : device-mapper: verity: 7:1: data block 0 is corrupted ... With this fix, errors are properly repaired. : verity-fec: 7:1: FEC 0: corrected 4 errors Signed-off-by: Milan Broz <gmazyland@gmail.com> Fixes: 8ca7cab82bda ("dm verity fec: fix misaligned RS roots IO") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-03vfio/pci: Fallback huge faults for unaligned pfnAlex Williamson
The PFN must also be aligned to the fault order to insert a huge pfnmap. Test the alignment and fallback when unaligned. Fixes: f9e54c3a2f5b ("vfio/pci: implement huge_fault support") Link: https://bugzilla.kernel.org/show_bug.cgi?id=219619 Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com> Reported-by: Precific <precification@posteo.de> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Precific <precification@posteo.de> Link: https://lore.kernel.org/r/20250102183416.1841878-1-alex.williamson@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2025-01-03drm/msm: UAPI error reportingRob Clark
Debugging incorrect UAPI usage tends to be a bit painful, so add a helper macro to make it easier to add debug logging which can be enabled at runtime via drm.debug. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/630578/
2025-01-03drm/msm/a5xx: remove null pointer check on pdevColin Ian King
The call chain on a5xx_gpu_init is such that pdev is not going to be null, so the null check on pdev can be removed. This also cleans up a static analysis warning where pdev is dereferenced before the null check which cannot actually occur. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/624180/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()Dan Carpenter
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32 values that come from the user via the submit_lookup_cmds() function. This addition could lead to an integer wrapping bug so use size_add() to prevent that. Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/624696/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: Expose uche trap base via uapiDanylo Piliaiev
This adds MSM_PARAM_UCHE_TRAP_BASE that will be used by Mesa implementation for VK_KHR_shader_clock and GL_ARB_shader_clock. Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com> Patchwork: https://patchwork.freedesktop.org/patch/627036/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: adreno: enable GMU bandwidth for A740 and A750Neil Armstrong
Now all the DDR bandwidth voting via the GPU Management Unit (GMU) is in place, declare the Bus Control Modules (BCMs) and the corresponding parameters in the GPU info struct. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629401/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: adreno: find bandwidth index of OPP and set it along freq indexNeil Armstrong
The Adreno GPU Management Unit (GMU) can also scale the DDR Bandwidth along the Frequency and Power Domain level, until now we left the OPP core scale the OPP bandwidth via the interconnect path. In order to enable bandwidth voting via the GPU Management Unit (GMU), when an opp is set by devfreq we also look for the corresponding bandwidth index in the previously generated bw_table and pass this value along the frequency index to the GMU. The GMU also takes another vote called AB which is a 16bit quantized value of the floor bandwidth against the maximum supported bandwidth. The AB is calculated with a default 25% of the bandwidth like the downstream implementation too inform the GMU firmware the minimal quantity of bandwidth we require for this OPP. Only pass the AB vote starting from A750 GPUs. Since we now vote for all resources via the GMU, setting the OPP is no more needed, so we can completely skip calling dev_pm_opp_set_opp() in this situation. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/629397/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: adreno: dynamically generate GMU bw tableNeil Armstrong
The Adreno GPU Management Unit (GMU) can also scale the ddr bandwidth along the frequency and power domain level, but for now we statically fill the bw_table with values from the downstream driver. Only the first entry is used, which is a disable vote, so we currently rely on scaling via the linux interconnect paths. Let's dynamically generate the bw_table with the vote values previously calculated from the OPPs. Those entries will then be used by the GMU when passing the appropriate bandwidth level while voting for a gpu frequency. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/629396/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: adreno: add plumbing to generate bandwidth vote table for GMUNeil Armstrong
The Adreno GPU Management Unit (GMU) can also scale DDR Bandwidth along the Frequency and Power Domain level, but by default we leave the OPP core scale the interconnect ddr path. While scaling via the interconnect path was sufficient, newer GPUs like the A750 requires specific vote paremeters and bandwidth to achieve full functionality. In order to calculate vote values used by the GPU Management Unit (GMU), we need to parse all the possible OPP Bandwidths and create a vote value to be sent to the appropriate Bus Control Modules (BCMs) declared in the GPU info struct. This vote value is called IB, while on the other side the GMU also takes another vote called AB which is a 16bit quantized value of the floor bandwidth against the maximum supported bandwidth. The AB vote will be calculated later when setting the frequency. The vote array will then be used to dynamically generate the GMU bw_table sent during the GMU power-up. Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/629395/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: adreno: add defines for gpu & gmu frequency table sizesNeil Armstrong
Even if the code uses ARRAY_SIZE() to fill those tables, it's still a best practice to not use magic values for tables in structs. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629393/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm/a6xx: Print GMU core firmware version at bootKonrad Dybcio
Log the version for informational purposes, such as for keeping track of possible GMU fw-related failures in crash / CI logs. Intentionally not implemented on the if (gmu->legacy) codepath, as these registers seem not to be used on there. Downstream additionally warns if the firmware version is too old for a given GPU, but we already pair the binary to a given GPU, so let's not go there at the moment. Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629934/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03drm/msm: registers: Add GMU FW version registerKonrad Dybcio
Add a register that contains the GMU core firmware version on non- legacy (non-sdm845-family) SoCs. The name is guesstimated based on what it does downstream, but it'll do. Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629932/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03Merge remote-tracking branch 'pm/opp/linux-next' into HEADRob Clark
Merge pm/opp tree to get dev_pm_opp_get_bw() Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-01-03RDMA/mlx5: Enable multiplane mode only when it is supportedMark Zhang
Driver queries vport_cxt.num_plane and enables multiplane when it is greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000), report vport_cxt.num_plane = 1 unexpectedly. Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set. Fixes: 2a5db20fa532 ("RDMA/mlx5: Add support to multi-plane device and port") Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org Cc: stable@vger.kernel.org Reported-by: Francesco Poli <invernomuto@paranoici.org> Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/ Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-01-03net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_initMeghana Malladi
When ICSSG interfaces are brought down and brought up again, the pru cores are shut down and booted again, flushing out all the memories and start again in a clean state. Hence it is expected that the IEP_CMP_CFG register needs to be flushed during iep_init() to ensure that the existing residual configuration doesn't cause any unusual behavior. If the register is not cleared, existing IEP_CMP_CFG set for CMP1 will result in SYNC0_OUT signal based on the SYNC_OUT register values. After bringing the interface up, calling PPS enable doesn't work as the driver believes PPS is already enabled, (iep->pps_enabled is not cleared during interface bring down) and driver will just return true even though there is no signal. Fix this by disabling pps and perout. Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-03net: ti: icssg-prueth: Fix firmware load sequence.MD Danish Anwar
Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0 and SLICE1. Currently whenever any ICSSG interface comes up we load the respective firmwares to PRU cores and whenever interface goes down, we stop the resective cores. Due to this, when SLICE0 goes down while SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is stopped. This results in clock jump for SLICE1 interface as the timesync related operations are no longer running. As there are interdependencies between SLICE0 and SLICE1 firmwares, fix this by running both PRU0 and PRU1 firmwares as long as at least 1 ICSSG interface is up. Add new flag in prueth struct to check if all firmwares are running and remove the old flag (fw_running). Use emacs_initialized as reference count to load the firmwares for the first and last interface up/down. Moving init_emac_mode and fw_offload_mode API outside of icssg_config to icssg_common_start API as they need to be called only once per firmware boot. Change prueth_emac_restart() to return error code and add error prints inside the caller of this functions in case of any failures. Move prueth_emac_stop() from common to sr1 driver. sr1 and sr2 drivers have different logic handling for stopping the firmwares. While sr1 driver is dependent on emac structure to stop the corresponding pru cores for that slice, for sr2 all the pru cores of both the slices are stopped and is not dependent on emac. So the prueth_emac_stop() function is no longer common and can be moved to sr1 driver. Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-03drm/hisilicon/hibmc: add dp module in hibmcBaihan Li
To support DP interface displaying in hibmc driver. Add a encoder and connector for DP modual. The HPD function and get_edid function will be add in next series, so temporarily using 1024x768 as default in hibmc_dp_connector_get_modes() Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-6-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: refactored struct hibmc_drm_privateBaihan Li
Refactored struct hibmc_drm_private to separate VGA module from generic struct. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-5-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp hw moduel in hibmc driverBaihan Li
Build a dp level that hibmc driver can enable dp by calling their functions. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-4-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp link moduel in hibmc driversBaihan Li
Add link training process functions in this moduel. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-3-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/hisilicon/hibmc: add dp aux in hibmc driversBaihan Li
Add dp aux read/write functions. They are basic functions and will be used later. Signed-off-by: Baihan Li <libaihan@huawei.com> Signed-off-by: Yongbang Shi <shiyongbang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tian Tao <tiantao6@hisilicon.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103093824.1963816-2-shiyongbang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03drm/i915/ddi: only call shutdown hooks for valid encodersJani Nikula
DDI might be HDMI or DP only, leaving the other encoder uninitialized. Calling the shutdown hook on an uninitialized encoder may lead to a NULL pointer dereference. Check the encoder types (and thus validity via the DP output_reg or HDMI hdmi_reg checks) before calling the hooks. Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Closes: https://lore.kernel.org/r/20241031105145.2140590-1-senozhatsky@chromium.org Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8b197c50e7f3be2bbc07e3935b21e919815015d5.1735568047.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-03drm/i915/display: add intel_encoder_is_hdmi()Jani Nikula
Similar to intel_encoder_is_dp() and friends. Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/e6bf9e01deb5d0d8b566af128a762d1313638847.1735568047.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-03drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()Jani Nikula
Errors from intel_ddi_init_hdmi_connector() can just mean "there's no HDMI" while we'll still want to continue with DP only. Handle the errors gracefully, but don't propagate. Clear the hdmi_reg which is used as a proxy to indicate the HDMI is initialized. v2: Gracefully handle but do not propagate Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Closes: https://lore.kernel.org/r/20241031105145.2140590-1-senozhatsky@chromium.org Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> # v1 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d72cb54ac7cc5ca29b3b9d70e4d368ea41643b08.1735568047.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-03drm/i915/hdmi: add error handling in g4x_hdmi_init()Jani Nikula
Handle encoder and connector init failures in g4x_hdmi_init(). This is similar to g4x_dp_init(). Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Closes: https://lore.kernel.org/r/20241031105145.2140590-1-senozhatsky@chromium.org Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/cafae7bf1f9ffb8f6a1d7a508cd2ce7dcf06fef7.1735568047.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-03drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()Jani Nikula
Propagate errors from intel_hdmi_init_connector() to be able to handle them at callers. This is similar to intel_dp_init_connector(). Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Closes: https://lore.kernel.org/r/20241031105145.2140590-1-senozhatsky@chromium.org Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/cdaf9e32cc4880c46e120933438c37b4d87be12e.1735568047.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-03drm/i915/ddi: change intel_ddi_init_{dp, hdmi}_connector() return typeJani Nikula
The caller doesn't actually need the returned struct intel_connector; it's stored in the ->attached_connector of intel_dp and intel_hdmi. Switch to returning an int with 0 for success and negative errors codes to be able to indicate success even when we don't have a connector. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/8ef7fe838231919e85eaead640c51ad3e4550d27.1735568047.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-02net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()Maciej S. Szmigiero
ipc_mmio_init() used the post-decrement operator in its loop continuing condition of "retries" counter being "> 0", which meant that when this condition caused loop exit "retries" counter reached -1. But the later valid exec stage failure check only tests for "retries" counter being exactly zero, so it didn't trigger in this case (but would wrongly trigger if the code reaches a valid exec stage in the very last loop iteration). Fix this by using the pre-decrement operator instead, so the loop counter is exactly zero on valid exec stage failure. Fixes: dc0514f5d828 ("net: iosm: mmio scratchpad") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://patch.msgid.link/8b19125a825f9dcdd81c667c1e5c48ba28d505a6.1735490770.git.mail@maciej.szmigiero.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-02net: sfc: Correct key_len for efx_tc_ct_zone_ht_paramsLiang Jie
In efx_tc_ct_zone_ht_params, the key_len was previously set to offsetof(struct efx_tc_ct_zone, linkage). This calculation is incorrect because it includes any padding between the zone field and the linkage field due to structure alignment, which can vary between systems. This patch updates key_len to use sizeof_field(struct efx_tc_ct_zone, zone) , ensuring that the hash table correctly uses the zone as the key. This fix prevents potential hash lookup errors and improves connection tracking reliability. Fixes: c3bb5c6acd4e ("sfc: functions to register for conntrack zone offload") Signed-off-by: Liang Jie <liangjie@lixiang.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241230093709.3226854-1-buaajxlj@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-03Merge tag 'drm-xe-fixes-2025-01-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - A couple of OA fixes squashed for stable backporting (Umesh) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z3bur0RmH6-70YSh@fedora
2025-01-03Merge tag 'drm-misc-fixes-2025-01-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.13-rc6: - Only fixes for adv7511 driver, including a use-after-free. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f58429b7-5f11-4b78-b577-de32b41299ea@linux.intel.com
2025-01-03Merge tag 'drm-intel-fixes-2024-12-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Fix C10 pll programming sequence [cx0_phy] (Suraj Kandpal) - Fix power gate sequence. [dg1] (Rodrigo Vivi) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z2wKf7tmElKFdnoP@linux
2025-01-03Merge tag 'drm-xe-fixes-2024-12-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes UAPI Changes: - Revert some devcoredump file format changes breaking a mesa debug tool (John) Driver Changes: - Fixes around waits when moving to system (Nirmoy) - Fix a typo when checking for LMEM provisioning (Michal) - Fix a fault on fd close after unbind (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z2mjt7OTfH76cgua@fedora
2025-01-02Merge tag 'pmdomain-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fixes from Ulf Hansson: - Silence warning by adding a dummy release function - imx: Fix an OF node reference leak in imx_gpcv2_probe() * tag 'pmdomain-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: core: add dummy release function to genpd device pmdomain: imx: gpcv2: fix an OF node reference leak in imx_gpcv2_probe()
2025-01-02Merge tag 'mmc-v6.13-rc2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: - sdhci-msm: Fix crypto key eviction * tag 'mmc-v6.13-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-msm: fix crypto key eviction
2025-01-02xe/oa: Fix query mode of operation for OAR/OACUmesh Nerlige Ramappa
This is a set of squashed commits to facilitate smooth applying to stable. Each commit message is retained for reference. 1) Allow a GGTT mapped batch to be submitted to user exec queue For a OA use case, one of the HW registers needs to be modified by submitting an MI_LOAD_REGISTER_IMM command to the users exec queue, so that the register is modified in the user's hardware context. In order to do this a batch that is mapped in GGTT, needs to be submitted to the user exec queue. Since all user submissions use q->vm and hence PPGTT, add some plumbing to enable submission of batches mapped in GGTT. v2: ggtt is zero-initialized, so no need to set it false (Matt Brost) 2) xe/oa: Use MI_LOAD_REGISTER_IMMEDIATE to enable OAR/OAC To enable OAR/OAC, a bit in RING_CONTEXT_CONTROL needs to be set. Setting this bit cause the context image size to change and if not done correct, can cause undesired hangs. Current code uses a separate exec_queue to modify this bit and is error-prone. As per HW recommendation, submit MI_LOAD_REGISTER_IMM to the target hardware context to modify the relevant bit. In v2 version, an attempt to submit everything to the user-queue was made, but it failed the unprivileged-single-ctx-counters test. It appears that the OACTXCONTROL must be modified from a remote context. In v3 version, all context specific register configurations were moved to use LOAD_REGISTER_IMMEDIATE and that seems to work well. This is a cleaner way, since we can now submit all configuration to user exec_queue and the fence handling is simplified. v2: (Matt) - set job->ggtt to true if create job is successful - unlock vm on job error (Ashutosh) - don't wait on job submission - use kernel exec queue where possible v3: (Ashutosh) - Fix checkpatch issues - Remove extra spaces/new-lines - Add Fixes: and Cc: tags - Reset context control bit when OA stream is closed - Submit all config via MI_LOAD_REGISTER_IMMEDIATE (Umesh) - Update commit message for v3 experiment - Squash patches for easier port to stable v4: (Ashutosh) - No need to pass q to xe_oa_submit_bb - Do not support exec queues with width > 1 - Fix disabling of CTX_CTRL_OAC_CONTEXT_ENABLE v5: (Ashutosh) - Drop reg_lri related comments - Use XE_OA_SUBMIT_NO_DEPS in xe_oa_load_with_lri Fixes: 8135f1c09dd2 ("drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> # commit 1 Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220171919.571528-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit 55039832f98c7e05f1cf9e0d8c12b2490abd0f16) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 20:10:36 +0000