summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-12-15drm/msm/dpu: add support for virtual planesDmitry Baryshkov
Only several SSPP blocks support such features as YUV output or scaling, thus different DRM planes have different features. Properly utilizing all planes requires the attention of the compositor, who should prefer simpler planes to YUV-supporting ones. Otherwise it is very easy to end up in a situation when all featureful planes are already allocated for simple windows, leaving no spare plane for YUV playback. To solve this problem make all planes virtual. Each plane is registered as if it supports all possible features, but then at the runtime during the atomic_check phase the driver selects backing SSPP block for each plane. As the planes are attached to the CRTC and not the encoder, the SSPP blocks are also allocated per CRTC ID (all other resources are currently allocated per encoder ID). This also matches the hardware requirement, where both rectangles of a single SSPP can only be used with the LM pair. Note, this does not provide support for using two different SSPP blocks for a single plane or using two rectangles of an SSPP to drive two planes. Each plane still gets its own SSPP and can utilize either a solo rectangle or both multirect rectangles depending on the resolution. Note #2: By default support for virtual planes is turned off and the driver still uses old code path with preallocated SSPP block for each plane. To enable virtual planes, pass 'msm.dpu_use_virtual_planes=1' kernel parameter. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629022/ Link: https://lore.kernel.org/r/20241215-dpu-virtual-wide-v8-1-65221f213ce1@linaro.org
2024-12-15drm/msm/dsi: Add support for SM6150Li Liu
Add support for DSI 2.3.1 (block used on SM6150). Signed-off-by: Li Liu <quic_lliu6@quicinc.com> Signed-off-by: Fange Zhang <quic_fangez@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/628011/ Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-7-2d875a67602d@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-15drm/msm/dsi: Add dsi phy support for SM6150Li Liu
Add phy configuration for SM6150 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Li Liu <quic_lliu6@quicinc.com> Signed-off-by: Fange Zhang <quic_fangez@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628009/ Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-6-2d875a67602d@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-15drm/msm/dpu: Add SM6150 supportLi Liu
Add definitions for the display hardware used on the Qualcomm SM6150 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Li Liu <quic_lliu6@quicinc.com> Signed-off-by: Fange Zhang <quic_fangez@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628007/ Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-5-2d875a67602d@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-15drm/msm: mdss: Add SM6150 supportLi Liu
Add support for MDSS on SM6150. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Li Liu <quic_lliu6@quicinc.com> Signed-off-by: Fange Zhang <quic_fangez@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628005/ Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-4-2d875a67602d@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-15drm/msm/dpu: filter out too wide modes if no 3dmux is presentAbhinav Kumar
On chipsets such as QCS615, there is no 3dmux present. In such a case, a layer exceeding the max_mixer_width cannot be split, hence cannot be supported. Filter out the modes which exceed the max_mixer_width when there is no 3dmux present. Also, add a check in the dpu_crtc_atomic_check() to return failure for such modes. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Xiangxu Yin <quic_xiangxuy@quicinc.com> # QCS615 Patchwork: https://patchwork.freedesktop.org/patch/627974/ Link: https://lore.kernel.org/r/20241209-no_3dmux-v3-1-48aaa555b0d3@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-15drm/msm/mdss: use boolean values for macrotile_modeDmitry Baryshkov
The macrotile_mode is a flag, not a bit value. Use true/false values to set it rather than 1/0. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/626374/ Link: https://lore.kernel.org/r/20241127-msm-mdss-ubwc-v3-3-9782a7c2b023@linaro.org
2024-12-15drm/msm/mdss: reuse defined bitfields for UBWC 2.0Dmitry Baryshkov
Follow other msm_mdss_setup_ubwc_dec_nn functions and use individual bits instead of just specifying the value to be programmed to the UBWC_STATIC register. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626373/ Link: https://lore.kernel.org/r/20241127-msm-mdss-ubwc-v3-2-9782a7c2b023@linaro.org
2024-12-15drm/msm/mdss: define bitfields for the UBWC_STATIC registerDmitry Baryshkov
Rather than hand-coding UBWC_STATIC value calculation, define corresponding bitfields and use them to setup the register value. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626372/ Link: https://lore.kernel.org/r/20241127-msm-mdss-ubwc-v3-1-9782a7c2b023@linaro.org
2024-12-15drm/msm/dpu: Add VBIF to DPU snapshotJessica Zhang
Add VBIF registers to the DPU snapshot to help with debugging. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/625946/ Link: https://lore.kernel.org/r/20241122-vbif-snapshot-v1-1-6e8fedd16fdf@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Single one-line fix in the ufs driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
2024-12-15drm/rockchip: vop2: Fix the windows switch between different layersAndy Yan
Every layer of vop2 should bind a window, and we also need to make sure that this window is not used by other layer. 0x5 is a reserved layer sel value on rk3568, but it will select Cluster3 on rk3588, configure unused layers to 0x5 will lead alpha blending error on rk3588. When we bind a window from layerM to layerN, we move the old window on layerN to layerM. Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver") Tested-by: Derek Foreman <derek.foreman@collabora.com> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-3-andyshrk@163.com
2024-12-15drm/rockchip: vop2: Add debugfs supportAndy Yan
/sys/kernel/debug/dri/vop2/summary: dump vop display state /sys/kernel/debug/dri/vop2/regs: dump whole vop registers /sys/kernel/debug/dri/vop2/active_regs: only dump the registers of activated modules Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568 Tested-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-2-andyshrk@163.com
2024-12-14drm/rockchip: Fix Copyright descriptionAndy Yan
The company name has update to Rockchip Electronics Co., Ltd. since 2021. And change Co.Ltd to Co., Ltd. to fix mail server warning: DBL_SPAM(6.50)[co.ltd:url]; Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241214071333.3325308-1-andyshrk@163.com
2024-12-14Merge tag 'usb-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes for some reported issues. Included in here are: - typec driver bugfixes - u_serial gadget driver bugfix for much reported and discussed issue - dwc2 bugfixes - midi gadget driver bugfix - ehci-hcd driver bugfix - other small bugfixes All of these have been in linux-next for over a week with no reported issues" * tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix connector status writing past buffer size usb: typec: ucsi: Fix completion notifications usb: dwc2: Fix HCD port connection race usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature usb: dwc2: Fix HCD resume usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode usb: core: hcd: only check primary hcd skip_phy_initialization usb: gadget: midi2: Fix interpretation of is_midi1 bits usb: dwc3: imx8mp: fix software node kernel dump usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe() usb: typec: anx7411: fix fwnode_handle reference leak usb: host: max3421-hcd: Correctly abort a USB request. dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml usb: ehci-hcd: fix call balance of clocks handling routines
2024-12-14Merge tag 'tty-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are two small serial driver fixes for 6.13-rc3. They are: - ioport build fallout fix for the 8250 port driver that should resolve Guenter's runtime problems - sh-sci driver bugfix for a reported problem Both of these have been in linux-next for a while with no reported issues" * tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: Work around warning backtrace in serial8250_set_defaults serial: sh-sci: Check if TX data was written to device in .tx_empty()
2024-12-14Merge tag 'staging-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging gpib driver build and bugfixes for issues that have been much-reported (should finally fix Guenter's build issues). There are more of these coming in later -rc releases, but for now this should fix the majority of the reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: gpib: Fix i386 build issue staging: gpib: Fix faulty workaround for assignment in if staging: gpib: Workaround for ppc build failure staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
2024-12-14Merge tag 'v6.13-p2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a regression in rsassa-pkcs1 as well as a buffer overrun in hisilicon/debugfs" * tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem crypto: rsassa-pkcs1 - Copy source data for SG list
2024-12-14Merge tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Set bindgen's Rust target version to prevent issues when pairing older rustc releases with newer bindgen releases, such as bindgen >= 0.71.0 and rustc < 1.82 due to unsafe_extern_blocks. drm/panic: - Remove spurious empty line detected by a new Clippy warning" * tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux: rust: kbuild: set `bindgen`'s Rust target version drm/panic: remove spurious empty line to clean warning
2024-12-14Merge tag 'iommu-fixes-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - Per-domain device-list locking fixes for the AMD IOMMU driver - Fix incorrect use of smp_processor_id() in the NVidia-specific part of the ARM-SMMU-v3 driver - Intel IOMMU driver fixes: - Remove cache tags before disabling ATS - Avoid draining PRQ in sva mm release path - Fix qi_batch NULL pointer with nested parent domain * tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/vt-d: Avoid draining PRQ in sva mm release path iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain iommu/vt-d: Remove cache tags before disabling ATS iommu/amd: Add lockdep asserts for domain->dev_list iommu/amd: Put list_add/del(dev_data) back under the domain->lock iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
2024-12-14Merge tag 'ata-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fix from Damien Le Moal: - Fix an OF node reference leak in the sata_highbank driver * tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
2024-12-13net: tun: fix tun_napi_alloc_frags()Eric Dumazet
syzbot reported the following crash [1] Issue came with the blamed commit. Instead of going through all the iov components, we keep using the first one and end up with a malformed skb. [1] kernel BUG at net/core/skbuff.c:2849 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848 Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293 RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00 RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000 RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50 R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80 FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284 tipc_aead_decrypt net/tipc/crypto.c:894 [inline] tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844 tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109 tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668 __netif_receive_skb_list_ptype net/core/dev.c:5720 [inline] __netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x2b5/0x870 net/core/dev.c:6256 napi_complete include/linux/netdevice.h:567 [inline] tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_writev+0x1b6/0x360 fs/read_write.c:1096 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: de4f5fed3f23 ("iov_iter: add iter_iovec() helper") Reported-by: syzbot+4f66250f6663c0c1d67e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/675b61aa.050a0220.599f4.00bb.GAE@google.com/T/#u Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20241212222247.724674-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-13Merge tag 'spi-fix-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few fairly small fixes for v6.13, the most substatial one being disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA platforms since it doesn't work" * tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA. spi: rockchip: Fix PM runtime count on no-op cs spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
2024-12-13Merge tag 'regulator-fix-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of additional changes, one ensuring we give AXP717 enough time to stabilise after changing voltages which fixes serious stability issues on some platforms and another documenting the DT support required for the Qualcomm WCN6750" * tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: axp20x: AXP717: set ramp_delay regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
2024-12-13Merge tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "This is the weekly fixes pull for drm. Just has i915, xe and amdgpu changes in it. Nothing too major in here: i915: - Don't use indexed register writes needlessly [dsb] - Stop using non-posted DSB writes for legacy LUT [color] - Fix NULL pointer dereference in capture_engine - Fix memory leak by correcting cache object name in error handler xe: - Fix a KUNIT test error message (Mirsad Todorovac) - Fix an invalidation fence PM ref leak (Daniele) - Fix a register pool UAF (Lucas) amdgpu: - ISP hw init fix - SR-IOV fixes - Fix contiguous VRAM mapping for UVD on older GPUs - Fix some regressions due to drm scheduler changes - Workload profile fixes - Cleaner shader fix amdkfd: - Fix DMA map direction for migration - Fix a potential null pointer dereference - Cacheline size fixes - Runtime PM fix" * tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernel: drm/xe/reg_sr: Remove register pool drm/xe: Call invalidation_fence_fini for PT inval fences in error state drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt drm/amdkfd: pause autosuspend when creating pdd drm/amdgpu: fix when the cleaner shader is emitted drm/amdgpu: Fix ISP HW init issue drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12 drm/amdkfd: hard-code cacheline size for gfx11 drm/amdkfd: Dereference null return value drm/i915: Fix memory leak by correcting cache object name in error handler drm/i915: Fix NULL pointer dereference in capture_engine drm/i915/color: Stop using non-posted DSB writes for legacy LUT drm/i915/dsb: Don't use indexed register writes needlessly drm/amdkfd: Correct the migration DMA map direction drm/amd/pm: Set SMU v13.0.7 default workload type drm/amd/pm: Initialize power profile mode amdgpu/uvd: get ring reference from rq scheduler drm/amdgpu: fix UVD contiguous CS mapping problem drm/amdgpu: use sjt mec fw on gfx943 for sriov Revert "drm/amdgpu: Fix ISP hw init issue"
2024-12-13Merge tag 'acpi-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two coding mistakes, one in the ACPI resources handling code and one in ACPICA: - Relocate the addr->info.mem.caching check in acpi_decode_space() to only execute it if the resource is of the correct type (Ilpo Järvinen) - Don't release a context_mutex that was never acquired in acpi_remove_address_space_handler() (Daniil Tatianin)" * tag 'acpi-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired ACPI: resource: Fix memory resource type union access
2024-12-13i915/guc: Accumulate active runtime on gt resetUmesh Nerlige Ramappa
On gt reset, if a context is running, then accumulate it's active time into the busyness counter since there will be no chance for the context to switch out and update it's run time. v2: Move comment right above the if (John) Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com
2024-12-13i915/guc: Ensure busyness counter increases motonicallyUmesh Nerlige Ramappa
Active busyness of an engine is calculated using gt timestamp and the context switch in time. While capturing the gt timestamp, it's possible that the context switches out. This race could result in an active busyness value that is greater than the actual context runtime value by a small amount. This leads to a negative delta and throws off busyness calculations for the user. If a subsequent count is smaller than the previous one, just return the previous one, since we expect the busyness to catch up. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com
2024-12-13i915/guc: Reset engine utilization buffer before registrationUmesh Nerlige Ramappa
On GT reset, we store total busyness counts for all engines and re-register the utilization buffer with GuC. At that time we should reset the buffer, so that we don't get spurious busyness counts on subsequent queries. To repro this issue, run igt@perf_pmu@busy-hang followed by igt@perf_pmu@most-busy-idle-check-all for a couple iterations. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com
2024-12-13Merge tag 'block-6.13-20241213' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Series from Damien fixing issues with the zoned write plugging - Fix for a potential UAF in block cgroups - Fix deadlock around queue freezing and the sysfs lock - Various little cleanups and fixes * tag 'block-6.13-20241213' of git://git.kernel.dk/linux: block: Fix potential deadlock while freezing queue and acquiring sysfs_lock block: Fix queue_iostats_passthrough_show() blk-mq: Clean up blk_mq_requeue_work() mq-deadline: Remove a local variable blk-iocost: Avoid using clamp() on inuse in __propagate_weights() block: Make bio_iov_bvec_set() accept pointer to const iov_iter block: get wp_offset by bdev_offset_from_zone_start blk-cgroup: Fix UAF in blkcg_unpin_online() MAINTAINERS: update Coly Li's email address block: Prevent potential deadlocks in zone write plug error recovery dm: Fix dm-zoned-reclaim zone write pointer alignment block: Ignore REQ_NOWAIT for zone reset and zone finish operations block: Use a zone write plug BIO work for REQ_NOWAIT BIOs
2024-12-13Merge tag 'libnvdimm-fixes-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Ira Weiny: - sysbot fix for out of bounds access * tag 'libnvdimm-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl
2024-12-14drm/modes: Fix drm_mode_vrefres() docsVille Syrjälä
We no longer store a cache vrefresh value in the mode. Remove the stale information from drm_vrefresh() docs. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129042629.18280-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-12-14drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()Ville Syrjälä
drm_mode_vrefresh() is trying to avoid divide by zero by checking whether htotal or vtotal are zero. But we may still end up with a div-by-zero of vtotal*htotal*... Cc: stable@vger.kernel.org Reported-by: syzbot+622bba18029bcde672e1@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=622bba18029bcde672e1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129042629.18280-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-12-13drm/xe: Revert some changes that break a mesa debug toolJohn Harrison
There is a mesa debug tool for decoding devcoredump files. Recent changes to improve the devcoredump output broke that tool. So revert the changes until the tool can be extended to support the new fields. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info") Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Julia Filipchuk <julia.filipchuk@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-xe@lists.freedesktop.org Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213172833.1733376-1-John.C.Harrison@Intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-13Merge branch 'acpica'Rafael J. Wysocki
Merge an ACPICA fix for 6.13-rc3: - Don't release a context_mutex that was never acquired in acpi_remove_address_space_handler() (Daniil Tatianin). * acpica: ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
2024-12-13drm/xe/irq: Manage MSI-X interrupts allocationIlia Levi
Expose functions to request and free MSI-X interrupts. The request has two flavors: - Static MSI-X allocation, for known MSI-X interrupts (e.g. GuC-to-host) - Dynamic MSI-X allocation, which uses the next available MSI-X interrupt Signed-off-by: Ilia Levi <ilia.levi@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-4-ilia.levi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-13drm/xe: Initial MSI-X support for HW enginesIlia Levi
- Configure the HW engines to work with MSI-X - Program the LRC to use memirq infra (similar to VF) - CS_INT_VEC field added to the LRC Bspec: 60342, 72547 Signed-off-by: Ilia Levi <ilia.levi@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-3-ilia.levi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-13drm/xe/irq: Separate MSI and MSI-X flowsIlia Levi
A new flow is added for devices that support MSI-X: - MSI-X vector 0 is used for GuC-to-host interrupt - MSI-X vector 1 (aka default MSI-X) is used for HW engines The default MSI-X will be passed to the HW engines in a subsequent patch. Signed-off-by: Ilia Levi <ilia.levi@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-2-ilia.levi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-13accel/amdxdna: use modern PM helpersArnd Bergmann
The old SET_SYSTEM_SLEEP_PM_OPS and SET_RUNTIME_PM_OPS macros cause a build warning when CONFIG_PM is disabled: drivers/accel/amdxdna/amdxdna_pci_drv.c:343:12: error: 'amdxdna_pmops_resume' defined but not used [-Werror=unused-function] 343 | static int amdxdna_pmops_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~ drivers/accel/amdxdna/amdxdna_pci_drv.c:328:12: error: 'amdxdna_pmops_suspend' defined but not used [-Werror=unused-function] 328 | static int amdxdna_pmops_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~ Change these to the modern replacements. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Tested-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213090259.68492-1-arnd@kernel.org
2024-12-13Merge tag 'gpio-fixes-for-v6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix several low-level issues in gpio-graniterapids - fix an initialization order issue that manifests itself with __counted_by() checks in gpio-ljca - don't default to y for CONFIG_GPIO_MVEBU with COMPILE_TEST enabled - move the DEFAULT_SYMBOL_NAMESPACE define before the export.h include in gpio-idio-16 * tag 'gpio-fixes-for-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace gpio: graniterapids: Fix GPIO Ack functionality gpio: graniterapids: Check if GPIO line can be used for IRQs gpio: graniterapids: Determine if GPIO pad can be used by driver gpio: graniterapids: Fix invalid RXEVCFG register bitmask gpio: graniterapids: Fix invalid GPI_IS register offset gpio: graniterapids: Fix incorrect BAR assignment gpio: graniterapids: Fix vGPIO driver crash gpio: ljca: Initialize num before accessing item in ljca_gpio_config gpio: GPIO_MVEBU should not default to y when compile-testing
2024-12-13drm: Drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Liu Ying <victor.liu@nxp.com> # ite-it6263.c Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241204105827.1682632-2-u.kleine-koenig@baylibre.com
2024-12-13irqchip/gic-v3: Work around insecure GIC integrationsMarc Zyngier
It appears that the relatively popular RK3399 SoC has been put together using a large amount of illicit substances, as experiments reveal that its integration of GIC500 exposes the *secure* programming interface to non-secure. This has some pretty bad effects on the way priorities are handled, and results in a dead machine if booting with pseudo-NMI enabled (irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time"), which relies on the priorities being programmed using the NS view. Let's restore some sanity by going one step further and disable security altogether in this case. This is not any worse, and puts us in a mode where priorities actually make some sense. Huge thanks to Mark Kettenis who initially identified this issue on OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux. Fixes: 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Reported-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chen-Yu Tsai <wens@csie.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org
2024-12-13irqchip/gic: Correct declaration of *percpu_base pointer in union gic_baseUros Bizjak
percpu_base is used in various percpu functions that expect variable in __percpu address space. Correct the declaration of percpu_base to void __iomem * __percpu *percpu_base; to declare the variable as __percpu pointer. The patch fixes several sparse warnings: irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces) irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu * ... irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces) irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base There were no changes in the resulting object files. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
2024-12-13accel/amdxdna: Add include interrupt.h to amdxdna_mailbox.cMike Lothian
For amdxdna_mailbox.c, linux/interrupt.h is indirectly included by trace/events/amdxdna.h. So if TRACING is disabled, driver compiling will fail. Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox") Reported-by: Mike Lothian <mike@fireburn.co.uk> Closes: https://lore.kernel.org/dri-devel/CAHbf0-E+Z2O7rW-x+-EKNQ-nLbf=_ohaNzXxE7WD2cj9kFJERQ@mail.gmail.com/ Signed-off-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213163856.1472207-1-lizhi.hou@amd.com
2024-12-13drm/display: use ERR_PTR on DP tunnel manager creation failKrzysztof Karas
Instead of returning a generic NULL on error from drm_dp_tunnel_mgr_create(), use error pointers with informative codes to align the function with stub that is executed when CONFIG_DRM_DISPLAY_DP_TUNNEL is unset. This will also trigger IS_ERR() in current caller (intel_dp_tunnerl_mgr_init()) instead of bypassing it via NULL pointer. v2: use error codes inside drm_dp_tunnel_mgr_create() instead of handling on caller's side (Michal, Imre) v3: fixup commit message and add "CC"/"Fixes" lines (Andi), mention aligning function code with stub Fixes: 91888b5b1ad2 ("drm/i915/dp: Add support for DP tunnel BW allocation") Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v6.9+ Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7q4fpnmmztmchczjewgm6igy55qt6jsm7tfd4fl4ucfq6yg2oy@q4lxtsu6445c
2024-12-13media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinlineArnd Bergmann
With KASAN enabled, clang fails to optimize the inline version of vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes of temporary values spilled to the stack: drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than] This seems to affect all versions of clang including the latest (clang-20), but the degree of stack overhead is different per release. Marking the function as noinline_for_stack is harmless here and avoids the problem completely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-13accel/amdxdna: Add query firmware versionLizhi Hou
Enhance GET_INFO ioctl to support retrieving firmware version. Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241206220001.164049-6-lizhi.hou@amd.com
2024-12-13accel/amdxdna: Replace mmput with mmput_async to avoid dead lockLizhi Hou
Hardware mailbox message receiving handler calls mmput to release the process mm. If the process has already exited, the mmput here may call mmu notifier handler, amdxdna_hmm_invalidate, which will cause a dead lock. Using mmput_async instead prevents this dead lock. Fixes: aac243092b70 ("accel/amdxdna: Add command execution") Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241206220001.164049-3-lizhi.hou@amd.com
2024-12-13accel/amdxdna: Add device status for aie2 devicesLizhi Hou
Add device status to track if aie2_hw_start() or aie2_hw_stop() is re-entered. In aie2_hw_stop(), call drmm_kfree to free mbox. Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241206220001.164049-2-lizhi.hou@amd.com
2024-12-13iommu/vt-d: Avoid draining PRQ in sva mm release pathLu Baolu
When a PASID is used for SVA by a device, it's possible that the PASID entry is cleared before the device flushes all ongoing DMA requests and removes the SVA domain. This can occur when an exception happens and the process terminates before the device driver stops DMA and calls the iommu driver to unbind the PASID. There's no need to drain the PRQ in the mm release path. Instead, the PRQ will be drained in the SVA unbind path. Unfortunately, commit c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID") changed this behavior by unconditionally draining the PRQ in intel_pasid_tear_down_entry(). This can lead to a potential sleeping-in-atomic-context issue. Smatch static checker warning: drivers/iommu/intel/prq.c:95 intel_iommu_drain_pasid_prq() warn: sleeping in atomic context To avoid this issue, prevent draining the PRQ in the SVA mm release path and restore the previous behavior. Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-iommu/c5187676-2fa2-4e29-94e0-4a279dc88b49@stanley.mountain/ Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20241212021529.1104745-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit (git 2.34.1) at 2025-09-16 09:13:18 +0000