summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-20mac80211_hwsim: add frame transmission support over virtioErel Geron
This allows communication with external entities. It also required fixing up the netlink policy, since NLA_UNSPEC attributes are no longer accepted. Signed-off-by: Erel Geron <erelx.geron@intel.com> [port to backports, inline the ID, use 29 as the ID as requested, drop != NULL checks, reduce ifdefs] Link: https://lore.kernel.org/r/20200305143212.c6e4c87d225b.I7ce60bf143e863dcdf0fb8040aab7168ba549b99@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-19net: dsa: sja1105: Avoid error message for unknown PHY mode on disabled portsVladimir Oltean
When sja1105_init_mii_settings iterates over the port list, it prints this message for disabled ports, because they don't have a valid phy-mode: [ 4.778702] sja1105 spi2.0: Unsupported PHY mode unknown! Suggested-by: Andrew Lunn <andrew@lunn.ch> Suggested-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-03-19 Here's the main bluetooth-next pull request for the 5.7 kernel. - Added wideband speech support to mgmt and the ability for HCI drivers to declare support for it. - Added initial support for L2CAP Enhanced Credit Based Mode - Fixed suspend handling for several use cases - Fixed Extended Advertising related issues - Added support for Realtek 8822CE device - Added DT bindings for QTI chip WCN3991 - Cleanups to replace zero-length arrays with flexible-array members - Several other smaller cleanups & fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix Txq restart check during backpressureRahul Lakkireddy
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix throughput drop during Tx backpressureRahul Lakkireddy
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: remove atomic64_add from veth_xdp_xmit hotpathLorenzo Bianconi
Remove atomic64_add from veth_xdp_xmit hotpath and rely on xdp_xmit_err/xdp_tx_err counters Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: introduce more xdp countersLorenzo Bianconi
Introduce xdp_xmit counter in order to distinguish between XDP_TX and ndo_xdp_xmit stats. Introduce the following ethtool counters: - rx_xdp_tx - rx_xdp_tx_errors - tx_xdp_xmit - tx_xdp_xmit_errors - rx_xdp_redirect Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: distinguish between rx_drops and xdp_dropsLorenzo Bianconi
Distinguish between rx_drops and xdp_drops since the latter is already reported in rx_packets. Report xdp_drops in ethtool statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: introduce more specialized counters in veth_statsLorenzo Bianconi
Introduce xdp_tx, xdp_redirect and rx_drops counters in veth_stats data structure. Move stats accounting in veth_poll. Remove xdp_xmit variable in veth_xdp_rcv_one/veth_xdp_rcv_skb and rely on veth_stats counters. This is a preliminary patch to align veth xdp statistics to mlx, intel and marvell xdp implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: move xdp stats in a dedicated structureLorenzo Bianconi
Move xdp stats in veth_stats data structure. This is a preliminary patch to align xdp statistics to mlx5, ixgbe and mvneta drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: RGMII skew delay configurationAntoine Tenart
This patch adds support for configuring the RGMII skew delays in Rx and Tx. The Rx and Tx skews are set based on the interface mode. By default their configuration is set to the default value in hardware (0.2ns); this means the driver do not rely anymore on the bootloader configuration. Then based on the interface mode being used, a 2ns delay is added: - RGMII_ID adds it for both Rx and Tx. - RGMII_RXID adds it for Rx. - RGMII_TXID adds it for Tx. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add support for RGMII MAC modeAntoine Tenart
This patch adds support for connecting VSC8584 PHYs to the MAC using RGMII. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: dsa: mt7530: Change the LINK bit to reflect the link statusRené van Dorst
Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by: Andrew Smith <andrew.smith@digi.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITYPetr Machata
Offload action skbedit priority when keyed to a flower classifier. The skb->priority field in Linux is very generic, so only allow setting the bottom 8 priorities and bounce anything else. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: core: Add QOS_ACTIONPetr Machata
The QOS_ACTION is used for manipulating the QoS attributes of a packet. Add the corresponding defines and helpers, in particular for the switch_priority override. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: stmmac: dwmac_lib: remove unnecessary checks in dwmac_dma_reset()Dejin Zheng
it will check the return value of dwmac_dma_reset() in the stmmac_init_dma_engine() function and report an error if the return value is not zero. so don't need check here. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add missing check on a phy_write return valueAntoine Tenart
Commit a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") introduced a call to 'phy_write' storing its return value to a variable called 'ret'. But 'ret' never was checked for a possible error being returned, and hence was not used at all. Fix this by checking the return value and exiting the function if an error was returned. As this does not fix a known bug, this commit is mostly cosmetic and not sent as a fix. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19liquidio: remove set but not used variable 's'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_chip_specific_setup': drivers/net/ethernet/cavium/liquidio/lio_main.c:1378:8: warning: variable 's' set but not used [-Wunused-but-set-variable] It's not used since commit b6334be64d6f ("net/liquidio: Delete driver version assignment") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: pci: Only issue reset when system is readyIdo Schimmel
During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state. However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load: [ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110 Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20Merge tag 'drm-intel-fixes-2020-03-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc7: - Track active elements during dequeue - Fix failure to handle all MCR ranges - Revert unnecessary workaround Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com
2020-03-20Merge tag 'amd-drm-fixes-5.6-2020-03-19' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-19: amdgpu: - Pageflip fix - VCN clockgating fixes - GPR debugfs fix for umr - GPU reset fix - eDP fix for MBP - DCN2.x fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319204054.1036478-1-alexander.deucher@amd.com
2020-03-19drm/amd/display: Fix pageflip event race condition for DCN.Mario Kleiner
Commit '16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN")' introduces a new way of pageflip completion handling for DCN, and some trouble. The current implementation introduces a race condition, which can cause pageflip completion events to be sent out one vblank too early, thereby confusing userspace and causing flicker: prepare_flip_isr(): 1. Pageflip programming takes the ddev->event_lock. 2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED 3. Releases ddev->event_lock. --> Deadline for surface address regs double-buffering passes on target pipe. 4. dc_commit_updates_for_stream() MMIO programs the new pageflip into hw, but too late for current vblank. => pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete in current vblank due to missing the double-buffering deadline by a tiny bit. 5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires, dm_dcn_crtc_high_irq() gets called. 6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the pageflip has been completed/will complete in this vblank and sends out pageflip completion event to userspace and resets pflip_status = AMDGPU_FLIP_NONE. => Flip completion event sent out one vblank too early. This behaviour has been observed during my testing with measurement hardware a couple of time. The commit message says that the extra flip event code was added to dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events in case the pflip irq doesn't fire, because the "DCH HUBP" component is clock gated and doesn't fire pflip irqs in that state. Also that this clock gating may happen if no planes are active. This suggests that the problem addressed by that commit can't happen if planes are active. The proposed solution is therefore to only execute the extra pflip completion code iff the count of active planes is zero and otherwise leave pflip completion handling to the pflip irq handler, for a more race-free experience. Note that i don't know if this fixes the problem the original commit tried to address, as i don't know what the test scenario was. It does fix the observed too early pageflip events though and points out the problem introduced. Fixes: 16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-19Merge tag 'mmc-v5.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - rtsx_pci: Fix support for some various speed modes - sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2 - sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier - sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10 - sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320 * tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: rtsx_pci: Fix support for speed-modes that relies on tuning mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2 mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012) mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320
2020-03-19rtc: max8907: add missing select REGMAP_IRQCorentin Labbe
I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-18Merge tag 'mlx5-updates-2020-03-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-03-17 1) Compiler warnings and cleanup for the connection tracking series 2) Bug fixes for the connection tracking series 3) Fix devlink port register sequence 4) Last five patches in the series, By Eli cohen Add the support for forwarding traffic between two eswitch uplink representors (Hairpin for eswitch), using mlx5 termination tables to change the direction of a packet in hw from RX to TX pipeline. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: noise: error out precomputed DH during handshake rather than configJason A. Donenfeld
We precompute the static-static ECDH during configuration time, in order to save an expensive computation later when receiving network packets. However, not all ECDH computations yield a contributory result. Prior, we were just not letting those peers be added to the interface. However, this creates a strange inconsistency, since it was still possible to add other weird points, like a valid public key plus a low-order point, and, like points that result in zeros, a handshake would not complete. In order to make the behavior more uniform and less surprising, simply allow all peers to be added. Then, we'll error out later when doing the crypto if there's an issue. This also adds more separation between the crypto layer and the configuration layer. Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: receive: remove dead code from default packet type caseJason A. Donenfeld
The situation in which we wind up hitting the default case here indicates a major bug in earlier parsing code. It is not a usual thing that should ever happen, which means a "friendly" message for it doesn't make sense. Rather, replace this with a WARN_ON, just like we do earlier in the file for a similar situation, so that somebody sends us a bug report and we can fix it. Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: queueing: account for skb->protocol==0Jason A. Donenfeld
We carry out checks to the effect of: if (skb->protocol != wg_examine_packet_protocol(skb)) goto err; By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this means that the check above still passes in the case where skb->protocol is zero, which is possible to hit with AF_PACKET: struct sockaddr_pkt saddr = { .spkt_device = "wg0" }; unsigned char buffer[5] = { 0 }; sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0), buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr)); Additional checks mean that this isn't actually a problem in the code base, but I could imagine it becoming a problem later if the function is used more liberally. I would prefer to fix this by having wg_examine_packet_protocol return a 32-bit ~0 value on failure, which will never match any value of skb->protocol, which would simply change the generated code from a mov to a movzx. However, sparse complains, and adding __force casts doesn't seem like a good idea, so instead we just add a simple helper function to check for the zero return value. Since wg_examine_packet_protocol itself gets inlined, this winds up not adding an additional branch to the generated code, since the 0 return value already happens in a mergable branch. Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge tag 'drm-misc-fixes-2020-03-18-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - drm/lease: fix WARNING in idr_destroy - Fix AVI frame colorimetry in the dw-hdmi bridge. - Fix compiler warning in komeda by annotating functions as __maybe_unused. - Downgrade bochs pci_request_region failure from error to warning to workaround firmware fb. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7654ac39-deb8-c9ca-9fd5-ef77b2636380@linux.intel.com
2020-03-18net: phy: realtek: read actual speed to detect downshiftHeiner Kallweit
At least some integrated PHY's in RTL8168/RTL8125 chip versions support downshift, and the actual link speed can be read from a vendor-specific register. Info about this register was provided by Realtek. More details about downshift configuration (e.g. number of attempts) aren't available, therefore the downshift tunable is not implemented. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Expose devlink resource occupancy for countersJiri Pirko
Implement occupancy counting for counters and expose over devlink resource API. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Consolidate subpools initializationJiri Pirko
Put all init operations related to subpools into mlxsw_sp_counter_sub_pools_init(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Move config validation along with resource registerJiri Pirko
Move the validation of subpools configuration, to avoid possible over commitment to resource registration. Add WARN_ON to indicate bug in the code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Expose subpool sizes over devlink resourcesJiri Pirko
Implement devlink resources support for counter pools. Move the subpool sizes calculations into the new resources register function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Add entry_size_res_id for each subpool and use it to ↵Jiri Pirko
query entry size Add new field to subpool struct that would indicate which resource id should be used to query the entry size for the subpool from the device. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Move sub_pools under per-instance pool structJiri Pirko
Currently, the global static array of subpools is used. Make it per-instance as multiple instances of the mlxsw driver can have different values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Query bank size from FW resourcesJiri Pirko
The bank size is different between Spectrum versions. Also it is a resource that can be queried. So instead of hard coding the value in code, query it from the firmware. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18vxlan: check return value of gro_cells_init()Taehee Yoo
gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init(). Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")` Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18cxgb4: rework TC filter rule insertion across regionsRahul Lakkireddy
Chelsio NICs have 3 filter regions, in following order of priority: 1. High Priority (HPFILTER) region (Highest Priority). 2. HASH region. 3. Normal FILTER region (Lowest Priority). Currently, there's a 1-to-1 mapping between the prio value passed by TC and the filter region index. However, it's possible to have multiple TC rules with the same prio value. In this case, if a region is exhausted, no attempt is made to try inserting the rule in the next available region. So, rework and remove the 1-to-1 mapping. Instead, dynamically select the region to insert the filter rule, as long as the new rule's prio value doesn't conflict with existing rules across all the 3 regions. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: use dev->reg_stateJulian Wiedmann
To check whether a netdevice has already been registered, look at NETREG_REGISTERED to replace some hacks I added a while ago. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: remove gratuitous NULL checksJulian Wiedmann
qeth_do_ioctl() is only reached through our own net_device_ops, so we can trust that dev->ml_priv still contains what we put there earlier. qeth_bridgeport_an_set() is an internal function that doesn't require such sanity checks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: add phys_to_virt() translation for AOBJulian Wiedmann
Data addresses in the AOB are absolute, and need to be translated before being fed into kmem_cache_free(). Currently this phys_to_virt() is a no-op. Also see commit 2db01da8d25f ("s390/qdio: fill SBALEs with absolute addresses"). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: don't report hard-coded driver versionJulian Wiedmann
Versions are meaningless for an in-kernel driver. Instead use the UTS_RELEASE that is set by ethtool_get_drvinfo(). Cc: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: add SW timestamping support for IQD devicesJulian Wiedmann
This adds support for SOF_TIMESTAMPING_TX_SOFTWARE. No support for non-IQD devices, since they orphan the skb in their xmit path. To play nice with TX bulking, set the timestamp when the buffer that contains the skb(s) is actually flushed out to HW. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: balance the TX queue selection for IQD devicesJulian Wiedmann
For ucast traffic, qeth_iqd_select_queue() falls back to netdev_pick_tx(). This will potentially use skb_tx_hash() to distribute the flow over all active TX queues - so txq 0 is a valid selection, and qeth_iqd_select_queue() needs to check for this and put it on some other queue. As a result, the distribution for ucast flows is unbalanced and hits QETH_IQD_MIN_UCAST_TXQ heavier than the other queues. Open-coding a custom variant of skb_tx_hash() isn't an option, since netdev_pick_tx() also gives us eg. access to XPS. But we can pull a little trick: add a single TC class that excludes the mcast txq, and thus encourage skb_tx_hash() to not pick the mcast txq. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: allow configuration of TX queues for IQD devicesJulian Wiedmann
Similar to the support for z/VM NICs, but we need to take extra care about the dedicated mcast queue: 1. netdev_pick_tx() is unaware of this limitation and might select the mcast txq. Catch this. 2. require at least _two_ TX queues - one for ucast, one for mcast. 3. when reducing the number of TX queues, there's a potential race where netdev_cap_txqueue() over-rules the selected txq index and falls back to index 0. This would place ucast traffic on the mcast queue, and result in TX errors. So for IQD, reject a reduction while the interface is running. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: allow configuration of TX queues for z/VM NICsJulian Wiedmann
Add support for ETHTOOL_SCHANNELS to change the count of active TX queues. Since all TX queue structs are pre-allocated and -registered, we just need to trivially adjust dev->real_num_tx_queues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: remove prio-queueing support for z/VM NICsJulian Wiedmann
z/VM NICs don't offer HW QoS for TX rings. So just use netdev_pick_tx() to distribute the connections equally over all enabled TX queues. We start with just 1 enabled TX queue (this matches the typical configuration without prio-queueing). A follow-on patch will allow users to enable additional TX queues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 06:43:02 +0000