| Age | Commit message (Collapse) | Author |
|---|
|
Motivated by the W=1 warning about export.h that was introduced this cycle
this is an attempt to apply an approximation of the principles of including
whatever is used in the file directly.
Helped by the include-what-you-use tool.
Reasoning:
- Drop linux/moduleparam.h as completely unused.
- linux/array_size.h for ARRAY_SIZE()
- linux/bitmap.h for for_each_set_bit
- linux/errno.h for error codes.
- linux/export.h for EXPORT_SYMBOL*()
- linux/math64.h for do_div - alternative would be asm/div64.h
- linux/minmax.h for min()
- linux/sysfs.h for sysfs_emit()
- linux/time64.h for USEC_PER_MSEC
- linux/iio/buffer.h for iio_push_to_buffers_with_timestamp()
- asm/byteorder.h for le16_to_cpu()
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250629183649.184479-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD4170-4 design provides features to aid interfacing with weigh scales,
thermocouples, and RTD sensors, which are set up with additional circuitry
for proper sensor operation. A key characteristic of those sensors is that
the circuit they are in must be excited with a single, a pair, or two pairs
of signals. The external circuit can be excited either by a voltage supply
or by AD4170-4 excitation signals. The sensor can then be read through a
different pair of lines that are connected to the AD4170-4 ADC.
Extend the ad4170-4 driver to handle external circuit sensors.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/52686943040ecad34cc89833d4d5d37f1a51f412.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD4170-4 has an internal temperature sensor that can be read using the
ADC. Whenever possible, configure an IIO channel to provide the chip's
temperature.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/71ac994060cf79a6c49f39b0c7d04c6c9cbbab00.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD4170-4 has four multifunctional pins that can be used as GPIOs. The
GPIO functionality can be accessed when the AD4170-4 chip is not busy
performing continuous data capture or handling any other register
read/write request. Also, the AD4170-4 does not provide any interrupt based
on GPIO pin states so AD4170-4 GPIOs can't be used as interrupt sources.
Implement gpio_chip callbacks to make AD4170-4 GPIO pins controllable
through the gpiochip interface.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/e031189d4b7e20cf02dd13220ab1ddf4798760c2.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD4170-4 chip can use an externally supplied clock at the XTAL2 pin, or
an external crystal connected to the XTAL1 and XTAL2 pins. Alternatively,
the AD4170-4 can provide its 16 MHz internal clock at the XTAL2 pin. In
addition, the chip has a programmable clock divider that allows dividing
the external or internal clock frequency, however, control for that is not
provided in this patch. Extend the AD4170-4 driver so it effectively uses
the provided external clock, if any, or supplies its own clock as a clock
provider.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/68697c7613b1a69d752e541caef28d08b3e59bc1.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add timestamp channel allowing to record the moment at which ADC samples
are captured in buffered read mode.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/e0af7e5424898bee0f3edfbb017133624efc169d.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Extend the AD4170-4 driver to allow buffered data capture in continuous
read mode. In continuous read mode, the chip skips the instruction phase
and outputs just ADC sample data, enabling faster sample rates to be
reached. The internal channel sequencer always starts sampling from channel
0 and channel 0 must be enabled if more than one channel is selected for
data capture. The scan mask validation callback checks if the
aforementioned condition is met.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/10ed544d31aa86eb40f93ea947f151d3d9827952.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for sinc3, sinc5, and averaged sinc5 digital filters along with
sample frequency configuration.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/31f4226b4172b0bbb26daa054b74b25b1966c7b2.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for ADC calibration bias/offset configuration.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/f240fce693d62ec8d587885074bf540e01919b31.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for ADC calibration gain configuration.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/ea8d07cad9b7b6106f0b5664c403ed080b362a6b.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD4170-4 is a multichannel, low noise, 24-bit precision sigma-delta
analog to digital converter. The AD4170-4 design offers a flexible data
acquisition solution with crosspoint multiplexed analog inputs,
configurable ADC voltage reference inputs, ultra-low noise integrated PGA,
digital filtering, wide range of configurable output data rates, internal
oscillator and temperature sensor, four GPIOs, and integrated features for
interfacing with load cell weigh scales, RTD, and thermocouple sensors.
Add basic support for the AD4170-4 ADC with the following features:
- Single-shot read.
- Analog front end PGA configuration.
- Differential and pseudo-differential input configuration.
Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Co-developed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/ce3fd150bd63a2aed6eb6fe59aad6d60c0f9fb67.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When Wake-on-Motion is on, enable system wakeup and keep the chip on
for waking up the system with an interrupt.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-3-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add WoM as accel roc rising x|y|z event.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-2-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move all DMA aligned buffers together at the end of the structure.
1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Bulk FIFO reading can be streamlined by eliminating redundant variables and
simplifying the process of reading x-, y-, and z-axis measurement sets.
This is a refactoring change with no expected impact on functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250702230315.19297-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Refactor the sensor interrupt mapping by utilizing regmap_assign_bits(),
which accepts a boolean value directly. Introduce a helper function to
streamline the identification of the configured interrupt line pin. Also,
use identifiers from units.h to represent the full 8-bit register when
setting bits.
This is a purely refactoring change and does not affect functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230315.19297-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The RDMA driver needs to map its own MMIO regions for the sake of
performance, meaning the IDPF needs to avoid mapping portions of the BAR
space. However, to be HW agnostic, the IDPF cannot assume where
these are and must avoid mapping hard coded regions as much as possible.
The IDPF maps the bare minimum to load and communicate with the
control plane, i.e., the mailbox registers and the reset state
registers. Because of how and when mailbox register offsets are
initialized, it is easier to adjust the existing defines to be relative
to the mailbox region starting address. Use a specific mailbox register
write function that uses these relative offsets. The reset state
register addresses are calculated the same way as for other registers,
described below.
The IDPF then calls a new virtchnl op to fetch a list of MMIO regions
that it should map. The addresses for the registers in these regions are
calculated by determining what region the register resides in, adjusting
the offset to be relative to that region, and then adding the
register's offset to that region's mapped address.
If the new virtchnl op is not supported, the IDPF will fallback to
mapping the whole bar. However, it will still map them as separate
regions outside the mailbox and reset state registers. This way we can
use the same logic in both cases to access the MMIO space.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The only event an RDMA vport aux driver cares about right now is an MTU
change on its underlying vport. Implement and plumb the handler to
signal the pre MTU change event and post MTU change events to the RDMA
vport aux driver.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement the idpf_idc_request_reset and idpf_idc_rdma_vc_send_sync
callbacks for the rdma core auxiliary driver to issue reset events to
the idpf and send (synchronous) virtchnl messages to the control plane
respectively.
Implement and plumb the reset handler for the opposite flow as well,
i.e. when the idpf is resetiing and needs to notify the rdma core
auxiliary driver.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement the functions to create, initialize, and destroy an RDMA vport
auxiliary device. The vport aux dev creation is dependent on the
core aux device to call idpf_idc_vport_dev_ctrl to signal that it is
ready for vport aux devices. Implement that core callback to either
create and initialize the vport aux dev or deinitialize.
RDMA vport aux dev creation is also dependent on the control plane to
tell us the vport is RDMA enabled. Add a flag in the create vport
message to signal individual vport RDMA capabilities.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add the initial idpf_idc.c file with the functions to kick off the IDC
initialization, create and initialize a core RDMA auxiliary device, and
destroy said device.
The RDMA core has a dependency on the vports being created by the
control plane before it can be initialized. Therefore, once all the
vports are up after a hard reset (either during driver load a function
level reset), the core RDMA device info will be created. It is populated
with the function type (as distinguished by the IDC initialization
function pointer), the core idc_ops function points (just stubs for
now), the reserved RDMA MSIX table, and various other info the core RDMA
auxiliary driver will need. It is then plugged on to the bus.
During a function level reset or driver unload, the device will be
unplugged from the bus and destroyed.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fetch the number of reserved RDMA vectors from the control plane.
Adjust the number of reserved LAN vectors if necessary. Adjust the
minimum number of vectors the OS should reserve to include RDMA; and
fail if the OS cannot reserve enough vectors for the minimum number of
LAN and RDMA vectors required. Create a separate msix table for the
reserved RDMA vectors, which will just get handed off to the RDMA core
device to do with what it will.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cannot confirm which variant exactly it is, as the EDID alphanumeric data
contains '0RGNR' <0x80> 'NE14QDM' and ends there; but it's 60 Hz and with
touch.
I do not have access to datasheets for these panels, so the timing is
a guess that was tested to work fine on this laptop.
Raw EDID dump:
00 ff ff ff ff ff ff 00 09 e5 1e 0b 00 00 00 00
10 20 01 04 a5 1e 13 78 07 fd 85 a7 53 4c 9b 25
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 a7 6d 00 a0 a0 40 78 60 30 20
36 00 2e bc 10 00 00 1a b9 57 00 a0 a0 40 78 60
30 20 36 00 2e bc 10 00 00 1a 00 00 00 fe 00 30
52 47 4e 52 80 4e 45 31 34 51 44 4d 00 00 00 00
00 02 41 31 a8 00 01 00 00 1a 41 0a 20 20 00 8f
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250706205723.9790-7-val@packett.cool
|
|
Detect the result of starting old governor in cpufreq_set_policy(). If it
fails, exit the governor and clear policy->governor.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-5-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cpufreq_verify_current_freq()
Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() in
case of calling it without check.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-4-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f63531064 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The has_target() checks in __cpufreq_offline() are duplicate.
Remove one of them and put the operations of exiting governor together
with storing last governor's name.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250623133402.3120230-5-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit c034b02e213d ("cpufreq: expose scaling_cur_freq sysfs file
for set_policy() drivers"), the file scaling_cur_freq is exposed to all
drivers.
No need to create this file separately. It's better to be contained in
cpufreq_attrs.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250623133402.3120230-4-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Users may disable HWP in firmware, in which case intel_pstate
wouldn't load unless the CPU model is explicitly supported.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20250623105601.3924-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the passive mode, intel_cpufreq_update_pstate() sets HWP_MIN_PERF in
accordance with the target frequency to ensure delivering adequate
performance, but it sets HWP_DESIRED_PERF to 0, so the processor has no
indication that the desired performance level is actually equal to the
floor one. This may cause it to choose a performance point way above
the desired level.
Moreover, this is inconsistent with intel_cpufreq_adjust_perf() which
actually sets HWP_DESIRED_PERF in accordance with the target performance
value.
Address this by adjusting intel_cpufreq_update_pstate() to pass
target_pstate as both the minimum and the desired performance levels
to intel_cpufreq_hwp_update().
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/6173276.lOV4Wx5bFT@rjwysocki.net
|
|
An abort op was introduced to allow its caller to invoke it within a lock
in the caller's function. On the other hand, _iommufd_object_alloc_ucmd()
would invoke the abort op in iommufd_object_abort_and_destroy() that must
be outside the caller's lock. So, these two cannot work together.
Add a validation in the _iommufd_object_alloc_ucmd(). Pick -EOPNOTSUPP to
reject the function call, indicating that the object allocator is buggy.
Link: https://patch.msgid.link/r/20250710202354.1658511-1-nicolinc@nvidia.com
Suggested-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
We only need to support version 1, 5 and 7.
Remove versions 2, 3, 4 and 6.
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.10d91f675505.Idd3a6da568261ee738918f290168a2ddaa87196b@changeid
|
|
This are not used in any of our devices. Remove it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.89156be9bc7f.I5ff5c1055eaf4fef9bd73233ea4d95504634ceed@changeid
|
|
These are not used in any of our devices. Remove them.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.dd784443be53.I4ff3b2392294f5df2625a71e2deee3364e9708f6@changeid
|
|
iwlmld was planned to be used for HR/GF, which has versions 5/6,
but it was decided at the end to use iwlmvm for HR/GF, so iwlmld only
needs to support version 8.
Remove versions 5 and 6 support.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.9c64bfbb16cb.I109bee4d4bf455cbffbb8d2340023338bcab886d@changeid
|
|
when BT is ON"
Due to a hw bug, this feature won't be enabled. Revert its
implementation.
This reverts commit 37808a3788fd ("wifi: iwlwifi: mld: allow EMLSR with
2.4 GHz when BT is ON")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.57755ac3f39d.I63ae0ee3e6cdc9b11175ad15927aaad3b8f8f47a@changeid
|
|
with bt on"
Due to a hw bug, this feature won't be enabled. Revert its tests.
This reverts commit f7cc80b871ee ("wifi: iwlwifi: mld: add kunit test
for emlsr with bt on")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.5fdf77497ad2.I1160f1dcff734cb42baa8fbf8aac121a1a24a4c5@changeid
|
|
The firmware provides the station id, use it since it makes our lives
easier. No need to assume we have a single BSS vif, and look up the
station id to whom the OMI was sent.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.7d2cd878855f.I8625ebb2c4e1fb484aafd16a07549f2eeb506e08@changeid
|
|
iwlmld was planned to be used for HR/GF, which has version 4,
but it was decided at the end to use iwlmvm for HR/GF, so iwlmld only
needs to support version 5.
Remove version 4 support.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.faeb1e6bac2a.I1a29b16f59b67c103d1f91dedee27e04cd7fdfdd@changeid
|
|
iwl_reduce_tx_power_cmd is not used anywhere, remove it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.313285673570.I87c646f8b9b83d63c7c6c293cc5d454c32d852c2@changeid
|
|
iwlmld was planned to be used for HR, which has version 9,
but it was decided at the end to use iwlmvm for HR, so iwlmld only
needs to support version 10.
Remove version 9 support.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.aeeb617abfae.I05101972506180644c42be5096c1b2afa36c625a@changeid
|
|
These versions are no longer used in any of our devices. Remove them.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.05fabbda0a2f.Id55eeb4f337eb52163621ca202d97a3539bf3f53@changeid
|
|
Implement a dump handler in the iwl_mvm operation mode to
collect firmware dump upon trigger from trans layer.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.366fc31fd551.I976cb17edd85a461043c7a4c7f4895bfaec9174a@changeid
|
|
When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only transmitted on 20 MHz. This can mean
that another STA is simultaneously transmitting on another
channel of the higher bandwidth, and apparently this energy
may be taken into account by the PHY, resulting in elevated
energy readings.
To work around this, track the firmware's corrected beacon
energy data and replace the RSSI in beacons by that. The
replacement happens for all beacons received in the context
of the current MAC or link (depending on FW version), in
which case the filters will drop all else. For a scan, which
is only tuning to 20 MHz channels, the MAC/link ID will be
one that isn't found (the AUX ID 4), and no correction will
be done (nor is it needed.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid
|
|
Since the iwlmvm driver now only supports pre-MLO devices,
we no longer need to maintain an extra explicit link ID;
valid MAC IDs and link IDs are both in the range 0-3 and
the driver always has a 1:1 MAC/link correspondence. Thus,
simply use the MAC ID as the link ID as well.
This simplifies some further work because on RX the ID is
given but there is some confusion about which versions of
the firmware report MAC and which report link ID.
While at it, clarify iwl_mvm_handle_missed_beacons_notif()
code a bit so it doesn't look like an invalid vif pointer
is being used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.005aa5fe34fe.Ib0c1187453f46ce49dc0f9f58907ee21f5b52634@changeid
|
|
EHT capable devices will only use iwlmld. So we can remove EMLSR code
from iwlmvm.
As part of removal, remove IWL_MVM_ESR_EXIT_FAIL_ENTRY EMLSR state.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.a69dc9c6ba49.I7f9fbc1f954b4c118625a4b8d51c72f3c84936da@changeid
|
|
There is no need to maintain PF ABI version on per-GT level.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-8-michal.wajdeczko@intel.com
|
|
While some VF/PF relay actions must be handled on the GT level,
like query for runtime registers, it was clarified by the arch
team that initial version negotiation can be done by the VF just
once, by using any available GuC/GT.
Move handling of the VF/PF ABI version negotiation on the PF side
from the GT level functions to the device level functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-7-michal.wajdeczko@intel.com
|
|
We already have function to print summary about VFs, but we missed
to add debugfs attribute to make it visible. Do it now.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-6-michal.wajdeczko@intel.com
|
