| Age | Commit message (Collapse) | Author |
|---|
|
When the chip increments the YEAR register and it already holds
bin2bcd(99) it reads as 0 afterwards. With this behaviour the last valid
day (without trickery) that has a representation is 2099-12-31 23:59:59.
So refuse to write later dates.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Immutable branch between MFD, Regulator and RTC for the v4.5 merge window
|
|
Select CLKSRC_MMIO when FSL_FTM_TIMER is enabled. Otherwise it fails to
compile on i386 with COMPILE_TEST=y.
"
on i386:
when CLKSRC_MMIO is not enabled:
drivers/built-in.o: In function `ftm_timer_init':
fsl_ftm_timer.c:(.init.text+0x6842): undefined reference to `clocksource_mmio_readl_up'
fsl_ftm_timer.c:(.init.text+0x6855): undefined reference to `clocksource_mmio_init'
"
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
and 'spi/topic/zynq' into spi-next
|
|
'spi/topic/s3c64xx', 'spi/topic/sh-msiof' and 'spi/topic/spidev' into spi-next
|
|
'spi/topic/mtk' and 'spi/topic/omap2-mcspi' into spi-next
|
|
'spi/topic/fsl-espi' and 'spi/topic/imx' into spi-next
|
|
'spi/topic/cadence' and 'spi/topic/davinci' into spi-next
|
|
|
|
|
|
|
|
The transport right now does not handle the case where we run out of DMA
descriptors. We just fail when we do not succeed. Adding code to retry for
a bit attempting to use the DMA engine instead of instantly fail to CPU
copy.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Document what I've learned so far about the gmux so that we can
collaboratively reverse-engineer its remaining unknown bits
without everyone having to start from scratch.
The DOC sections are bound together in the gpu.tmpl DocBook
under a new vga_switcheroo "Handlers" chapter. Eventually
this should be amended with documentation about the four other
handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM,
radeon ATPX, amdgpu ATPX).
Requires kernel-doc with asciidoc support.
The EFI variable was reverse-engineered by Bruno Bierbaumer
<bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>.
Some of the remaining open questions:
* How are vblank intervals synchronized on retinas to achieve seamless
switching? Is the DP mux capable of this? It's not mentioned in the
data sheets. Or is it done at the OS level, i.e. do we have to
synchronize vblank intervals between DRM drivers? There's a signal
coming from the panel connector and going into gmux, could this be
the vblank signal as received by the panel to properly time the
switch?
* On retinas there's an I2C bus between gmux and the connector of the
right I/O board, apparently leading to the Parade PS8401A HDMI
repeater. What is this for, is it controlled via gmux registers?
Data sheet:
http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/
* On retinas there's an I2C bus between gmux and the LED driver.
Pre-retinas connected the LED driver to SMBUS. Are there additional
gmux registers on retinas to control it?
* The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the
retina MacBook Pro. The Mac Pro doesn't have a built-in display,
so what is its purpose? Power control of the dual FirePro GPUs?
Switching of the external DP/Thunderbolt ports? The iFixit teardown
clearly shows one TI HD3SS212 DisplayPort mux on the logic board next
to one of the three Thunderbolt controllers. However six muxes would
be necessary to switch all six ports between GPUs. The mux is probably
necessary for one of the display configurations allowed by Apple,
but which one?
https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778
https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge
https://support.apple.com/en-us/HT202801
* Registers we haven't decoded yet:
0x700 32 Bit configmap?
0x708 32 Bit power sequence?
0x712 8 Bit status of clock from panel on retinas?
0x713 8 Bit dito?
0x724 16 Bit backlight, raw value?
0x760 32 Bit backlight
0x764 32 Bit backlight
0x768 8 Bit backlight
0x76a 16 Bit backlight
0x76c 16 Bit backlight
0x76e 16 Bit backlight
0x77f edp/dp/hdmi probe? retina only.
* Addition by Bruno Prémont <bonbons@linux-vserver.org>:
"Missing is also precise knowledge as to what the gmux depends on.
From behavioral reports, it is somehow sensitive to VGA IO/MEM
routing (it apparently needs the routing to go to integrated GPU,
not discrete GPU).
When the routing is inappropriate backlight control IO just reads back
as 0xFF (and eventually gmux IO in general does so)."
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Hardware blocks on the GPU like ACP generate interrupts in
the GPU interrupt controller, but are driven by a separate
driver. Add an irq domain to the GPU driver so that
blocks like ACP can register a Linux interrupt.
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This provides an interface to get access to the base address
of PCI resources (MMIO, DOORBELL, etc.). Only MMIO and
DOORBELL are implemented right now. This is necessary to
properly utilize shared drivers on platform devices. IP
modules can use this interface to get the base address
of the resource and add any additional offset and set the
size when setting up the platform driver(s).
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The lower bits read from a BAR register will contain property bits
that we do not care about. Clear those so that we can use the BAR
values for limit and xlat registers.
Reported-by: Conrad Meyer <cem@freebsd.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The transmit overrun avoidance error path in ntb_process_tx accidentally
swapped the first two values being passed to the tx_handler client.
This could result in crashes in the ntb_netdev (or other out-of-tree NTB
clients).
Reported-by: Alex Depoutovitch <alex@pernixdata.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
For PCIe compliance, the PHY registers need setting as per the manual.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
If runtime PM is enabled in the kernel config, simply enable the clocks
once during probe.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Drivers based on the DesignWare core can override the config read accessors
by supplying rd_own_conf() and rd_other_conf() function pointers.
dw_pcie_rd_conf() calls dw_pcie_rd_own_conf() (for accesses to the root
bus) or dw_pcie_rd_other_conf():
dw_pcie_rd_conf
dw_pcie_rd_own_conf # if on root bus
dw_pcie_rd_other_conf # if not on root bus
Previously we checked for rd_other_conf() directly in dw_pcie_rd_conf(),
but we checked for rd_own_conf() in dw_pcie_rd_own_conf().
Check for rd_other_conf() in dw_pcie_rd_other_conf() to make this symmetric
with the rd_own_conf() checking, and similarly for the write path.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
|
|
There are a few discussions left with regards to this ioctl:
1) the name of the new structs will contain _v2_ on it?
2) what's the best alternative to avoid compat32 issues?
Due to that, let's postpone the addition of this new ioctl to
the next Kernel version, to give people more time to discuss it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Remove unneeded NULL test. The index variable of list_for_each_entry is
never NULL, as it is the structure that contains the list pointer.
Generated by: scripts/coccinelle/iterators/itnull.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Geliang Tang <geliangtang@163.com>
|
|
While mxl111sf may have multiple frontends, it has just one
tuner. Reflect that on the media graph.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Devices like mxl111sf-based WinTV Aero-m have multiple
frontends, all linked on the same demod. Currently, the
dvb_create_graph() function is not smart enough to create
multiple links. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Sometimes, it is desired to create 1:n and n:1 or even
n:n links between different entities with the same
function.
This is actually needed to support DVB devices that
have multiple frontends. While we could do a function
like that internally at the DVB core, such function is
generic enough to be at media-entity, and it could be
useful on some other places.
So, add such function.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We should not remove the media_device until its last usage,
or we may have use after free troubles.
So, move the per-adapter media_device removal to happen at
the end of the adapter removal code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Several pure digital TV devices have a frontend with the tuner
integrated on it. Add the RF connector when dvb_create_media_graph()
is called on such devices.
Tested with siano and dvb_usb_mxl111sf drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Those functions are used only if CONFIG_MEDIA_CONTROLLER_DVB.
Without that, if !CONFIG_MEDIA_CONTROLLER_DVB, it would produce
two warnings:
drivers/media/dvb-core/dvbdev.c:219:12: warning: 'dvb_create_tsout_entity' defined but not used [-Wunused-function]
static int dvb_create_tsout_entity(struct dvb_device *dvbdev,
^
drivers/media/dvb-core/dvbdev.c:264:12: warning: 'dvb_create_media_entity' defined but not used [-Wunused-function]
static int dvb_create_media_entity(struct dvb_device *dvbdev,
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Currently, v4l2_device_register() doesn't use the media_device
struct. So, calling media_device_init() could be called either
before or after v4l2_device_register().
Yet, it is a good practice to initialize everything before calling
the register functions. Also, the other drivers call
media_device_init() before registering the V4L2 device.
So, move the call for media_device_init() to happen earlier on
exynos4-is and s3c-camif.
This is just a cleanup patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
media_device_register_entity() is protected by a spin_lock.
Calling ida_pre_get() with GFP_KERNEL may put it to sleep,
with is a bad idea and causes this warning:
[ 8812.397195] BUG: sleeping function called from invalid context at mm/slub.c:1287
[ 8812.397203] in_atomic(): 1, irqs_disabled(): 0, pid: 15179, name: modprobe
[ 8812.397207] INFO: lockdep is turned off.
[ 8812.397213] CPU: 2 PID: 15179 Comm: modprobe Tainted: G B 4.4.0-rc2+ #41
[ 8812.397218] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[ 8812.397222] 0000000000000000 ffff880314c77268 ffffffff818f8ba7 ffff8803b17dde00
[ 8812.397232] ffff880314c77290 ffffffff811c2ee5 ffff8803b17dde00 ffffffff8284dbc9
[ 8812.397241] 0000000000000507 ffff880314c772d0 ffffffff811c30d5 0000000041b58ab3
[ 8812.397250] Call Trace:
[ 8812.397258] [<ffffffff818f8ba7>] dump_stack+0x4b/0x64
[ 8812.397265] [<ffffffff811c2ee5>] ___might_sleep+0x245/0x3a0
[ 8812.397270] [<ffffffff811c30d5>] __might_sleep+0x95/0x1a0
[ 8812.397276] [<ffffffff818fd083>] ? ida_pre_get+0x113/0x250
[ 8812.397282] [<ffffffff8153bb77>] kmem_cache_alloc+0x197/0x250
[ 8812.397288] [<ffffffff818fd083>] ida_pre_get+0x113/0x250
[ 8812.397293] [<ffffffff818fd265>] ida_simple_get+0xa5/0x170
[ 8812.397298] [<ffffffff818fd1c0>] ? ida_pre_get+0x250/0x250
[ 8812.397306] [<ffffffffa07382d1>] media_device_register_entity+0x171/0x420 [media]
[ 8812.397318] [<ffffffffa129e76f>] v4l2_device_register_subdev+0x34f/0x640 [videodev]
[ 8812.397324] [<ffffffffa0768dea>] v4l2_i2c_new_subdev_board+0x12a/0x250 [v4l2_common]
[ 8812.397330] [<ffffffffa0768fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common]
[ 8812.397337] [<ffffffffa0768f10>] ? v4l2_i2c_new_subdev_board+0x250/0x250 [v4l2_common]
[ 8812.397347] [<ffffffffa13d2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828]
[ 8812.397352] [<ffffffff814450cc>] ? power_down+0xc4/0xc4
[ 8812.397361] [<ffffffffa13d2c90>] ? au0828_tuner_callback+0x160/0x160 [au0828]
[ 8812.397370] [<ffffffffa13d319f>] au0828_card_setup+0x11f/0x340 [au0828]
[ 8812.397378] [<ffffffffa13d3080>] ? au0828_card_analog_fe_setup+0x3f0/0x3f0 [au0828]
[ 8812.397384] [<ffffffff812a575b>] ? msleep+0x7b/0xc0
[ 8812.397393] [<ffffffffa13d0d79>] au0828_usb_probe+0x679/0xcf0 [au0828]
[ 8812.397399] [<ffffffff81d7619d>] usb_probe_interface+0x45d/0x940
[ 8812.397406] [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90
[ 8812.397411] [<ffffffff81ca7940>] ? driver_probe_device+0xd90/0xd90
[ 8812.397417] [<ffffffff81ca7940>] ? driver_probe_device+0xd90/0xd90
[ 8812.397422] [<ffffffff81ca7a61>] __driver_attach+0x121/0x160
[ 8812.397427] [<ffffffff81ca141f>] bus_for_each_dev+0x11f/0x1a0
[ 8812.397433] [<ffffffff81ca1300>] ? subsys_dev_iter_exit+0x10/0x10
[ 8812.397439] [<ffffffff822917d7>] ? _raw_spin_unlock+0x27/0x40
[ 8812.397445] [<ffffffff81ca5d4d>] driver_attach+0x3d/0x50
[ 8812.397450] [<ffffffff81ca5039>] bus_add_driver+0x4c9/0x770
[ 8812.397456] [<ffffffff81ca944c>] driver_register+0x18c/0x3b0
[ 8812.397462] [<ffffffff8124c952>] ? __raw_spin_lock_init+0x32/0x100
[ 8812.397468] [<ffffffff81d71e58>] usb_register_driver+0x1f8/0x440
[ 8812.397473] [<ffffffffa0208000>] ? 0xffffffffa0208000
[ 8812.397481] [<ffffffffa02080b7>] au0828_init+0xb7/0x1000 [au0828]
[ 8812.397486] [<ffffffff810021b1>] do_one_initcall+0x141/0x300
[ 8812.397492] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[ 8812.397497] [<ffffffff8123bbf6>] ? trace_hardirqs_on_caller+0x16/0x590
[ 8812.397502] [<ffffffff815406e6>] ? kasan_unpoison_shadow+0x36/0x50
[ 8812.397507] [<ffffffff815406e6>] ? kasan_unpoison_shadow+0x36/0x50
[ 8812.397512] [<ffffffff815406e6>] ? kasan_unpoison_shadow+0x36/0x50
[ 8812.397517] [<ffffffff815407f7>] ? __asan_register_globals+0x87/0xa0
[ 8812.397524] [<ffffffff814454e5>] do_init_module+0x1d0/0x5a4
[ 8812.397530] [<ffffffff812ed7e8>] load_module+0x6648/0x9d70
[ 8812.397535] [<ffffffff812e4b70>] ? symbol_put_addr+0x50/0x50
[ 8812.397546] [<ffffffff812e71a0>] ? module_frob_arch_sections+0x20/0x20
[ 8812.397552] [<ffffffff8158e950>] ? open_exec+0x50/0x50
[ 8812.397559] [<ffffffff811648db>] ? ns_capable+0x5b/0xd0
[ 8812.397565] [<ffffffff812f1208>] SyS_finit_module+0x108/0x130
[ 8812.397571] [<ffffffff812f1100>] ? SyS_init_module+0x1f0/0x1f0
[ 8812.397576] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14
[ 8812.397582] [<ffffffff82292236>] entry_SYSCALL_64_fastpath+0x16/0x7a
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The DVB drivers may have 257 PADs. Get the next power of two
that would accomodate that amount.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of using one u32 counter per type for object IDs, use
just one counter. With such change, it makes sense to simplify
the debug logs too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Some exported functions were still documented at the .c file,
instead of documenting at the .h one.
Move the documentation to the right place, as we only use headers
at media device-drivers.xml DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This isn't really a part of any interface drivers are expected to use. In
order to keep drivers from using it, hide it in media-entity.c. This was
always an arbitrary number and should be removed in the long run.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The bitmaps for entity enumerations used to be statically allocated. Now
that the drivers have been converted to use the new interface which
explicitly initialises the enum objects, drop the pre-allocated bitmaps.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of using a bitmap directly in a driver, use the new media
entity enumeration interface to perform the same.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The same bug was present in the omap4iss driver as was in the omap3isp
driver. The code got copied to the omap4iss driver while broken. Fix the
omap4iss driver as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of using a bitmap directly in a driver, use the new media entity
enumeration interface to perform the same.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of using a bitmap directly in a driver, use the new media entity
enumeration interface to perform the same.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Initialise a given graph walk object once, and then keep using it whilst
the same pipeline is running. Once the pipeline is stopped, release the
graph walk object.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This will also mean that the necessary graph related data structures will
be allocated dynamically, removing the need for maximum ID checks.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Kamil Debski <k.debski@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The media graph walk requires initialisation and cleanup soon. Update the
users to perform the soon necessary API calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add media_entity_graph_walk_init() and media_entity_graph_walk_cleanup()
functions in order to dynamically allocate memory for the graph. This is
not done in media_entity_graph_walk_start() as there are situations where
e.g. correct error handling, that itself may not fail, requires successful
graph walk.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
