| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"omap:
- add missing error check
- fix PM disable in probe error path
stm32:
- unmap DMA buffer on transfer failure
- use correct device when mapping and unmapping during transfers"
* tag 'i2c-for-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: unmap DMA mapped buffer
i2c: stm32: fix the device used for the DMA map
i2c: omap: Fix an error handling path in omap_i2c_probe()
i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for reported problems
for 6.16-rc6. Included in here are:
- Thunderbolt fixes for some much-reported issues
- dwc2 driver fixes
- dwc3 driver fixes
- new usb-serial driver device ids
- gadgetfs configfs fix
- musb driver fix
- USB hub driver fix
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hub: Don't try to recover devices lost during warm reset.
usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY
usb: dwc3: qcom: Don't leave BCR asserted
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI
usb: gadget: configfs: Fix OOB read on empty string write
usb: musb: fix gadget state on disconnect
USB: serial: option: add Foxconn T99W640
thunderbolt: Fix bit masking in tb_dp_port_set_hops()
thunderbolt: Fix wake on connect at runtime
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for 6.16-rc6 that do:
- fix for the serial core OF resource leak
- pch_uart driver fix for a "incorrect variable" issue
Both of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Fix dma_sync_sg_for_device() nents value
serial: core: fix OF node leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small driver fixes for the vchiq_arm staging driver:
- reverts of previous changes that turned out to caused problems.
- change to prevent a resource leak
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: Make vchiq_shutdown never fail
Revert "staging: vchiq_arm: Create keep-alive thread during probe"
Revert "staging: vchiq_arm: Improve initial VCHIQ connect"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO fixes from Greg KH:
"Here are some char/misc/iio and other driver fixes for 6.16-rc7.
Included in here are:
- IIO driver fixes for reported problems
- Interconnect driver fixes for reported problems
- nvmem driver fixes
- bunch of comedi driver fixes for long-term bugs
- Kconfig dependancy fixes for mux drivers
- other small driver fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (35 commits)
nvmem: layouts: u-boot-env: remove crc32 endianness conversion
misc: amd-sbi: Explicitly clear in/out arg "mb_in_out"
misc: amd-sbi: Address copy_to/from_user() warning reported in smatch
misc: amd-sbi: Address potential integer overflow issue reported in smatch
comedi: comedi_test: Fix possible deletion of uninitialized timers
comedi: Fix initialization of data for instructions that write to subdevice
comedi: Fix use of uninitialized data in insn_rw_emulate_bits()
comedi: das6402: Fix bit shift out of bounds
comedi: aio_iiro_16: Fix bit shift out of bounds
comedi: pcl812: Fix bit shift out of bounds
comedi: das16m1: Fix bit shift out of bounds
comedi: Fix some signed shift left operations
comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large
nvmem: imx-ocotp: fix MAC address byte length
MAINTAINERS: add miscdevice Rust abstractions
mux: mmio: Fix missing CONFIG_REGMAP_MMIO
iio: dac: ad3530r: Fix incorrect masking for channels 4-7 in powerdown mode
iio: adc: ad7380: fix adi,gain-milli property parsing
iio: adc: ad7949: use spi_is_bpw_supported()
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix adding missing validation that 8 bit I/O mode is actually
supported for the specific device when attempting to use it.
Anything that runs into this should already have been having problems,
enforcing this should just make things safer and more obvious"
* tag 'spi-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add check for 8-bit transfer with 8 IO mode support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for a memory leak when we get an error during regmap init for a
bus that uses free_on_exit to clean up device specific data"
* tag 'regmap-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix potential memory leak of regmap_bus
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- just a small fixup to the xpad driver correcting the recent addition
of the Acer NGR200 controller
* tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - set correct controller type for Acer NGR200
|
|
This adds the capabilities, ipsec_next_header and inner/outer
l4_type_ext fields to support RSS for the decrypted packets.
These fields are specifically for firmware steering. HWS validation
logic is updated to correctly handle the changes, ensuring the
unsupported fields are not set.
Besides, reserved_at_c4 is fixed to reserved_at_d4 to reflect the
accurate offset within the structure.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752734895-257735-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786ef8 ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This adds support for allowing proactive reclaim in general on a NUMA
system. A per-node interface extends support for beyond a memcg-specific
interface, respecting the current semantics of memory.reclaim: respecting
aging LRU and not supporting artificially triggering eviction on nodes
belonging to non-bottom tiers.
This patch allows userspace to do:
echo "512M swappiness=10" > /sys/devices/system/node/nodeX/reclaim
One of the premises for this is to semantically align as best as possible
with memory.reclaim. During a brief time memcg did support nodemask until
55ab834a86a9 (Revert "mm: add nodes= arg to memory.reclaim"), for which
semantics around reclaim (eviction) vs demotion were not clear, rendering
charging expectations to be broken.
With this approach:
1. Users who do not use memcg can benefit from proactive reclaim. The
memcg interface is not NUMA aware and there are usecases that are
focusing on NUMA balancing rather than workload memory footprint.
2. Proactive reclaim on top tiers will trigger demotion, for which
memory is still byte-addressable. Reclaiming on the bottom nodes will
trigger evicting to swap (the traditional sense of reclaim). This
follows the semantics of what is today part of the aging process on
tiered memory, mirroring what every other form of reclaim does
(reactive and memcg proactive reclaim). Furthermore per-node proactive
reclaim is not as susceptible to the memcg charging problem mentioned
above.
3. Unlike the nodes= arg, this interface avoids confusing semantics,
such as what exactly the user wants when mixing top-tier and low-tier
nodes in the nodemask. Further per-node interface is less exposed to
"free up memory in my container" usecases, where eviction is intended.
4. Users that *really* want to free up memory can use proactive
reclaim on nodes knowingly to be on the bottom tiers to force eviction
in a natural way - higher access latencies are still better than swap.
If compelled, while no guarantees and perhaps not worth the effort,
users could also also potentially follow a ladder-like approach to
eventually free up the memory. Alternatively, perhaps an 'evict'
option could be added to the parameters for both memory.reclaim and
per-node interfaces to force this action unconditionally.
[akpm@linux-foundation.org: user_proactive_reclaim(): return -EBUSY on PGDAT_RECLAIM_LOCKED contention, per Roman]
[dave@stgolabs.net: memcg && node is also a bogus case, per Shakeel]
Link: https://lkml.kernel.org/r/20250717235604.2atyx2aobwowpge3@offworld
Link: https://lkml.kernel.org/r/20250623185851.830632-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only user of the counter (FUSE) was removed in commit 0c58a97f919c
("fuse: remove tmp folio for writebacks and internal rb tree") so follow
the established pattern of removing the counter and hardcoding 0 in
meminfo output, as done recently with NR_BOUNCE. Update documentation for
procfs, including for the value for Bounce that was missed when removing
its counter.
Also remove the mention of NR_WRITEBACK_TEMP implications from a comment
in wb_position_ratio(). The rest of the comment there about fuse setting
bdi->max_ratio to 1% is still correct.
[vbabka@suse.cz: v2]
Link: https://lkml.kernel.org/r/5a848e15-6a57-4ecb-a015-d4f358b8a5d3@suse.cz
Link: https://lkml.kernel.org/r/20250625-nr_writeback_removal-v1-1-7f2a0df70faa@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-cpro: Validate the size of the received input buffer
- ina238: Report energy in microjoules as expected by the ABI
- pmbus/ucd9000: Fixed GPIO functionality
* tag 'hwmon-for-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ucd9000) Fix error in ucd9000_gpio_set
hwmon: (ina238) Report energy in microjoules
hwmon: (corsair-cpro) Validate the size of the received input buffer
|
|
Currently, the mac80211 layer handles construction and parsing
of 802.11 headers during packet transmission and reception.
Offloading encapsulation and decapsulation to hardware can
significantly enhance performance. Check the service bit to determine
if the firmware supports Ethernet offload. If supported, advertise the
capability to mac80211 to bypass software-based 802.11 header
processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-4-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the ath12k driver supports only the native Wi-Fi
frame format. In this mode, the ieee80211_tx_status() function
works correctly to report transmission status to mac80211, as
it retrieves station information using sta_info_get_by_addrs().
However, this method is not applicable for Ethernet-converted
packets, since sta_info_get_by_addrs() cannot extract station
information from such formats.
Retrieve station information using ath12k_peer_find_by_id() to
support all frame formats, including native Wi-Fi, raw, and Ethernet.
Report transmission status using ieee80211_tx_status_ext(), and
include rate information as part of the datapath TX status report.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-3-nithyanantham.paramasivam@oss.qualcomm.com
[changed instances of { 0 } to {}]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in the transmit (TX) direction, EAPOL, QoS NULL,
and multicast frames are sent in native Wi-Fi (802.11) format.
However, when the virtual interface is configured in Ethernet
mode, transmission fails for packets enqueued in native Wi-fi format.
To address this issue, the firmware should be instructed to
treat these packets as RAW type packets, ensuring proper
handling even when the interface operates in Ethernet mode.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718025513.32982-2-nithyanantham.paramasivam@oss.qualcomm.com
[fix indentation]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The test for "if (!desc_data)" does not work correctly because the list
iterator in a list_for_each_entry() loop is always non-NULL. If we don't
exit via a break, then it points to invalid memory. Instead, use a tmp
variable for the list iterator and only set the "desc_data" when we have
found a match.
Fixes: 1cd53df733c2 ("gpio: sysfs: don't look up exported lines as class devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/747545bf-05f0-4f89-ba77-cb96bf9041f1@sabinyo.mountain
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-7-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-6-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-5-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-4-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-3-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Several drivers call pinmux_generic_add_function() passing it the
contents of struct pinfunction as first three arguments. We can make
this shorter by simply providing an interface allowing to pass the
address of struct pinfunction directly when adding a new function.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-2-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This macro is only used in one place and pin function descriptors should
only be created by pinmux core so there's no point in exposing it to
other pinctrl users. Remove the macro and hand-code its functionality.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-1-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250717125758.53141-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use client-aware print macro instead of usual device print in more
places to expand debug-ability.
The client-aware print macro prefixes the usual device print with
current connection endpoints.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250717141112.1696482-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For unifomity, print using client device on bus where possible.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250717141112.1696482-2-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features, late breaking fixes and cleanup for 6.17
The normal mixed bag. A few more fixes than usual as I failed to send
them out earlier.
New device support
==================
adi,ad4080
- New driver for this high speed ADC. Includes extensions to iio-backends
necessary to support filter config, variable data lands and data
alignment control.
adi,ad4170-4
- New driver for this 24-bit very feature rich ADC suited for weigh scale
and thermocouple applications.
adi,ad7405
- New driver for this single channel isolated ADC with backend support
(adi-axi-adc)
google,cros_ec_activity
- Add activity detection to the existing set of cros_ec drivers covering
both human body and significant motion detection.
mediatek,mt6359
- Add support for MT6363 and MT6373 PMIC Auxiliary ADCs.
nicera,d3-323-aa
- New driver for this configurable Passive InfraRed sensor.
Device ID only
==============
mediatek,mt7981-auxadc
- Add ID to mt2701 driver as fully compatible with mt7986-auxadc.
rohm,bu79100g
- Add ID to ad7476 driver as fully compatible with TI ADS7866.
Features
========
Core
- New in_voltageY_convdelay to allow for devices to control timing
offsets between sampling different channels.
adi,ad-sigma-delta-library
- Support SPI offload (later fix for missing Kconfig dependency)
adi,ad4851
- SPI 3-wire support.
adi,ad7606
- Power supply control.
- convdelay and calibbias support for calibration purposes.
- gain calibration support based on external filter resistance provided
from device tree.
adi,ad7768-1
- Add output regulator for VCM output, typically used for preconditioning
circuits.
- Add gpio controller for the 4 GPIOs.
- Multiple scan type support to enable 16-bit modes.
- Support synchronization over SPI.
- Filter type and oversampling ratio control.
- Low pass filter cut off read only attribute.
adi,adxl313
- FIFO support
- DC activity, inactivity detection with power-save on inactivity
- AC coupled activity detection
- Documentation for this complex driver.
- debugfs register access.
adi,adxl345
- Sampling frequency and sensor range controls.
bosch,bmi270
- Add step counter support.
invensense,icm42600
- Wake on motion support.
Cleanup and fixes
=================
backend
- Drop unused parameter from iio_backend_ovesampling_ratio_set()
docs
- Fix ABI docs around I and Q modifiers.
treewide
- Switch remaining drives to use maple tree regcache.
- Drop use of DRIVER_NAME style definitions when only used in one
place.
- Drop unused export.h includes.
- Use = { } in place of memset in various drivers.
- Constify various info structures and related.
- Switch some drivers from array of chip_info structures to individual
named structures.
adi,ad-sigma_delta library
- Fix over allocation of scan buffer. (bits/bytes confusion)
- Sort includes and apply iwyu principles to ensure sensible set.
- Use u8 instead of uint8_t
- Replace hard coded type sizes with sizeof() and BITS_TO_BYTES() as
appropriate.
- Factor out setting of read address to reduce duplication.
- Switch to buffer predisable so error handling on buffer enable
functions correctly (balanced against postenable).
adi,ad4000
- Don't use sift_right() on an unsigned value.
adi,ad7173
- Add missing check on spi_setup() succeeding.
- Simplify clock enable disable code using devm_clk_get_enabled()
- Fix channel index for syscalib_mode
- Fix number of configuration slots for some devics.
- Fix the channel used for calibration.
- Fix setting ODR up in probe.
adi,ad7380
- Drop unused oversampling_ratio getter function call as value never
used.
adi,ad7606
- Exit if invalid dt_schema encountered rather than carrying on with
unknown config.
adi,ad7768-1
- Ensure SYNC_IN pulse is long enough.
- Switch sampling_frequency_available to read_avail() callback.
adi,ada4250
- Ensuring a dma-safe buffer for regmap_bulk_read()
- Use a local dev variable to simplify code
- Relax chip ID matching to allow for fallback dt compatibles.
- Make use of devm_regulator_get_enabled_read_voltage() to replace
equivalent code.
- Shuffle elements around in struct to improve logical groupings and
reduce holes.
- Use dev_err_probe()
adi,adxl313
- Use regcache to reduce traffic.
- Factor out enabling of measurement.
adi,adxl345
- Drop irq from struct as only used locally in code
- Simplify measure enable function using regmap_update_bits()
- Replace some magic numbers by units.h defines
- Simplify interrupt mapping code
- Simplify FIFO read out.
adi,axi-dac
- Factor out code to check for bus free to reduce duplication.
avago,apds9306
- Use a helper to get register address in both get and set functions.
bosch,bmi160+bmi270
- Ensure triggers suspended and resumed correctly.
bosch,bmo055
- Fix theoretical OOB acces to hw_xlate array.
freescale,vf610
- Drop -ENOMEM error message as plenty of existing prints if memory
allocation fails.
- Use dev_err_probe() and devm_clk_geT_enabled() to simplify probe().
kionix,kx022a
- Apply include what you use principles to includes.
invensense,itg3200
- Add missing dt-binding for this gyroscope.
invensense,icm42600
- Switch from int64_t and similar to s64 and other kernel types.
- Simplify arrangement of DMA safe buffers and potentially reduce
structure size a little.
invensense,mpu6050
- Reduce duplication in aux read/write code.
- Use sysfs_emit() to replace scnprintf()
murata,irsd200
- Drop duplicate printing of ret in dev_err_probe()
nxp,lpc3220-adc
- Add missing clocks property to dt-binding.
st,spear600
- Convert dt-binding that got left behind in staging to yaml in the main
tree.
st,stm32-adc
- Use dev_fwnode() rather than directly accessing the of_node.
vti,sca3000
- Use direct returns instead of gotos where simple.
Various other minor typo and white space fixes.
* tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: adc: ad_sigma_delta: Select IIO_BUFFER_DMAENGINE and SPI_OFFLOAD
iio: adc: ad7173: fix setting ODR in probe
iio: adc: ad7173: fix calibration channel
iio: adc: ad7173: fix num_slots
iio: adc: ad7173: fix channels index for syscalib_mode
iio: adc: ad_sigma_delta: change to buffer predisable
iio: ABI: fix correctness of I and Q modifiers
iio: Add driver for Nicera D3-323-AA PIR sensor
dt-bindings: iio: proximity: Add Nicera D3-323-AA PIR sensor
dt-bindings: vendor-prefixes: Add Nicera
iio: dac: vf610: Simplify with devm_clk_get_enabled()
iio: adc: vf610: Simplify with dev_err_probe
iio: adc: vf610: Drop -ENOMEM error message
iio: imu: bno055: make bno055_sysfs_attr const
iio: imu: bno055: fix OOB access of hw_xlate array
dt-bindings: iio: adc: Add support for MT7981
iio: accel: kionix-kx022a: Apply approximate iwyu principles to includes
iio: adc: ad4170-4: Add support for weigh scale, thermocouple, and RTD sens
iio: adc: ad4170-4: Add support for internal temperature sensor
iio: adc: ad4170-4: Add GPIO controller support
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.17-rc1
- Marek's change fixes the incorrect use of sgtable calls.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
zynq_fpga: use sgtable-based scatterlist wrappers
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Make local functions static (as they should be).
- Fix the modem name for Foxconn T99W640 modem.
- Disable runtime PM for Qcom QDU100 modem as it doesn't support M3 state.
- Fix endianness of BHI vector table to allow MHI to work correctly on big
endian platforms like PowerPC.
- Add modem support for Semtech EM929x, Foxconn T99W696 and Telit FN990B40
modems.
- Fix the OOB access to Transfer Ring Element (TRE) by hardening the checks in
parse_xfer_event().
* tag 'mhi-for-v6.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
bus: mhi: host: Make local functions static
|
|
Add SDX72 based modem Telit FN990B40, reusing FN920C04 configuration.
01:00.0 Unassigned class [ff00]: Qualcomm Device 0309
Subsystem: Device 1c5d:201a
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
[mani: added sdx72 in the comment to identify the chipset]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250716091836.999364-1-dnlplm@gmail.com
|
|
When a remote device sends a completion event to the host, it contains a
pointer to the consumed TRE. The host uses this pointer to process all of
the TREs between it and the host's local copy of the ring's read pointer.
This works when processing completion for chained transactions, but can
lead to nasty results if the device sends an event for a single-element
transaction with a read pointer that is multiple elements ahead of the
host's read pointer.
For instance, if the host accesses an event ring while the device is
updating it, the pointer inside of the event might still point to an old
TRE. If the host uses the channel's xfer_cb() to directly free the buffer
pointed to by the TRE, the buffer will be double-freed.
This behavior was observed on an ep that used upstream EP stack without
'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer
is written")'. Where the device updated the events ring pointer before
updating the event contents, so it left a window where the host was able to
access the stale data the event pointed to, before the device had the
chance to update them. The usual pattern was that the host received an
event pointing to a TRE that is not immediately after the last processed
one, so it got treated as if it was a chained transaction, processing all
of the TREs in between the two read pointers.
This commit aims to harden the host by ensuring transactions where the
event points to a TRE that isn't local_rp + 1 are chained.
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
[mani: added stable tag and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250714163039.3438985-1-quic_yabdulra@quicinc.com
|
|
T99W696 modem is based on Qualcomm SDX61 chipset, which is an economic
version compared to the baseline SDX62/SDX65 chipsets. Add support for it
by introducing a new 'mhi_channel_config'. Since this modem supports the
NMEA channel, a new config is needed.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250528092232.16111-1-slark_xiao@163.com
|
|
Remove hard-coded strings by using the str_true_false() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250623202814633ukJqUDLU7BRlLLhvWkbD7@zte.com.cn
|
|
better performance.
Add MHI controller config for EM929x. It uses the same configuration
as EM919x. Also set the MRU to 32768 to improve downlink throughput.
02:00.0 Unassigned class [ff00]: Qualcomm Technologies, Inc Device 0308
Subsystem: Device 18d7:0301
Signed-off-by: Adam Xue <zxue@semtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250528175943.12739-1-zxue@semtech.com
|
|
On big endian platform like PowerPC, the MHI bus (which is little endian)
does not start properly. The following example shows the error messages by
using QCN9274 WLAN device with ath12k driver:
ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
ath12k_pci 0001:01:00.0: MSI vectors: 1
ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
ath12k_pci 0001:01:00.0: failed to start mhi: -110
ath12k_pci 0001:01:00.0: failed to power up :-110
ath12k_pci 0001:01:00.0: failed to create soc core: -110
ath12k_pci 0001:01:00.0: failed to init core: -110
ath12k_pci: probe of 0001:01:00.0 failed with error -110
The issue seems to be with the incorrect DMA address/size used for
transferring the firmware image over BHI. So fix it by converting the DMA
address and size of the BHI vector table to little endian format before
sending them to the device.
Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
[mani: added stable tag and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250519145837.958153-1-alexander.wilhelm@westermo.com
|
|
The QDU100 device does not support the MHI M3 state, necessitating the
disabling of runtime PM for this device. It is essential to disable
runtime PM if the device does not support M3 state.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: Fixed the kdoc comment for no_m3]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20250425-vdev_next-20250411_pm_disable-v4-1-d4870a73ebf9@quicinc.com
|
|
T99W640 was mistakenly mentioned as T99W515. T99W515 is a LGA device, not
a M.2 modem device. So correct it's name to avoid name mismatch issue.
Fixes: bf30a75e6e00 ("bus: mhi: host: Add support for Foxconn SDX72 modems")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: commit message fixup]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250606095019.383992-1-slark_xiao@163.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes buffer overflows in qat and chelsio"
* tag 'v6.16-p7' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - Use crypto_shash_export_core
crypto: chelsio - Use crypto_shash_export_core
|
|
In the original design, it is assumed local and peer eswitches have the
same number of vfs. However, in new firmware, local and peer eswitches
can have different number of vfs configured by mlxconfig. In such
configuration, it is incorrect to derive the number of vfs from the
local device's eswitch.
Fix this by updating the peer miss rules add and delete functions to use
the peer device's eswitch and vf count instead of the local device's
information, ensuring correct behavior regardless of vf configuration
differences.
Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1752753970-261832-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If cmd_exec() is called with callback and mlx5_cmd_invoke() returns an
error, resources allocated in cmd_exec() will not be freed.
Fix the code to release the resources if mlx5_cmd_invoke() returns an
error.
Fixes: f086470122d5 ("net/mlx5: cmdif, Return value improvements")
Reported-by: Alex Tereshkin <atereshkin@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1752753970-261832-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wire-up ethtool_ops::nway_reset to phy_ethtool_nway_reset in order to
support re-starting auto-negotiation.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250717180915.2611890-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_close_many is used only by vlan/dsa and one mtk driver, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Note that one dev_set_threaded call still remains in mt76 for debugfs file.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
__netif_set_mtu is used only by bond, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_pre_changeaddr_notify is used only by ipvlan/bond, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc34acd577f1 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_get_mac_address is used only by tun/tap, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
