summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-03-02dwc_eth_qos: release descriptors outside netif_tx_lockLars Persson
To prepare for using the CMA, we can not be in atomic context when de-allocating DMA buffers. The tx lock was needed only to protect the hw reset against the xmit handler. Now we briefly grab the tx lock while stopping the queue to make sure no thread is inside or will enter the xmit handler. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02dwc_eth_qos: fix race condition in dwceqos_start_xmitRabin Vincent
The xmit handler and the tx_reclaim tasklet had a race on the tx_free variable which could lead to a tx timeout if tx_free was updated after the tx complete interrupt. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx4_core: Allow resetting VF admin mac to zeroJack Morgenstein
The VF administrative mac addresses (stored in the PF driver) are initialized to zero when the PF driver starts up. These addresses may be modified in the PF driver through ndo calls initiated by iproute2 or libvirt. While we allow the PF/host to change the VF admin mac address from zero to a valid unicast mac, we do not allow restoring the VF admin mac to zero. We currently only allow changing this mac to a different unicast mac. This leads to problems when libvirt scripts are used to deal with VF mac addresses, and libvirt attempts to revoke the mac so this host will not use it anymore. Fix this by allowing resetting a VF administrative MAC back to zero. Fixes: 8f7ba3ca12f6 ('net/mlx4: Add set VF mac address support') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by: Moshe Levi <moshele@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx4_core: Check the correct limitation on VFs for HA modeMoni Shoua
The limit of 63 is only for virtual functions while the actual enforcement was for VFs plus physical functions, fix that. Fixes: e57968a10bc1 ('net/mlx4_core: Support the HA mode for SRIOV VFs too') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx4_core: Fix lockdep warning in handling of mac/vlan tablesJack Morgenstein
In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. We move to use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2+ #49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation Fixes: 5f61385d2ebc ('net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Provide correct packet/bytes statisticsGal Pressman
Using the HW VPort counters for traffic (rx/tx packets/bytes) statistics is wrong. This is because frames dropped due to steering or out of buffer will be counted as received. To fix that, we move to use the packet/bytes accounting done by the driver for what the netdev reports out. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support [...]') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Add rx/tx bytes software countersGal Pressman
Sum up rx/tx bytes in software as we do for rx/tx packets, to be reported in upcoming statistics fix. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Correctly handle RSS indirection table when changing number of ↵Tariq Toukan
channels Upon changing num_channels, reset the RSS indirection table to match the new value. Fixes: 2d75b2bc8a8c ('net/mlx5e: Add ethtool RSS configuration options') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Fix ethtool RX hash func configuration changeTariq Toukan
We should modify TIRs explicitly to apply the new RSS configuration. The light ndo close/open calls do not "refresh" them. Fixes: 2d75b2bc8a8c ('net/mlx5e: Add ethtool RSS configuration options') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Fix soft lockup when HW Timestamping is enabledEran Ben Elisha
Readers/Writers lock for SW timecounter was acquired without disabling interrupts on local CPU. The problematic scenario: * HW timestamping is enabled * Timestamp overflow periodic service task is running on local CPU and holding write_lock for SW timecounter * Completion arrives, triggers interrupt for local CPU. Interrupt routine calls napi_schedule(), which triggers rx/tx skb process. An attempt to read SW timecounter using read_lock is done, which is already locked by a writer on the same CPU and cause soft lockup. Add irqsave/irqrestore for when using the readers/writers lock for writing. Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Fix LRO modifyTariq Toukan
Ethtool LRO enable/disable is broken, as of today we only modify TCP TIRs in order to apply the requested configuration. Hardware requires that all TIRs pointing to the same RQ should share the same LRO configuration. For that all other TIRs' LRO fields must be modified as well. Fixes: 5c50368f3831 ('net/mlx5e: Light-weight netdev open/stop') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02net/mlx5e: Remove wrong poll CQ optimizationTariq Toukan
With the MLX5E_CQ_HAS_CQES optimization flag, the following buggy flow might occur: - Suppose RX is always busy, TX has a single packet every second. - We poll a single TX cqe and clear its flag. - We never arm it again as RX is always busy. - TX CQ flag is never changed, and new TX cqes are not polled. We revert this optimization. Fixes: e586b3b0baee ('net/mlx5: Ethernet Datapath files') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_41~48Chunhao Lin
For RTL8168G/RTL8168H/RTL8411B/RTL8107E, enable this flag to eliminate message "AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x0002 address=0x0000000000003000 flags=0x0050] in dmesg. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix indentation in bnx2x_sp_task()Michal Schmidt
Fix a case of misleading code indentation. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: define event data reserved fields as little-endianMichal Schmidt
For consistency with other event data structs and to lessen the chance of a mistake should one of the reserved fields become used in the future, define the reserved fields as little-endian. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: define fields of struct cfc_del_event_data as little-endianMichal Schmidt
There were no missing endianness conversions in this case, but the fields of struct cfc_del_event_data should be defined as little-endian to get rid of the ugly (__force __le32) casts. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: access cfc_del_event only if the opcode is CFC_DELMichal Schmidt
It's not really a bug, but it was odd that bnx2x_eq_int() read the message data as if it were a cfc_del_event regardless of the event type. It's cleaner to access only the appropriate member of union event_data after checking the event opcode. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix receive of VF->PF mailbox messages by the PF on big-endianMichal Schmidt
On ppc64 the PF did not receive messages from VFs correctly. Fields of struct vf_pf_event_data are little-endian. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix sending VF->PF messages on big-endianMichal Schmidt
When a VF is sending a message to the PF, it needs to trigger the PF to tell it the message is ready. The trigger did not work on ppc64. No interrupt appeared in the PF. The bug is due to confusion about the layout of struct trigger_vf_zone. In bnx2x_send_msg2pf() the trigger is written using writeb(), not writel(), so the attempt to define the struct with a reversed layout on big-endian is counter-productive. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02bnx2x: fix crash on big-endian when adding VLANMichal Schmidt
bnx2x crashes during the initialization of the 8021q module on ppc64. The bug is a missing conversion from le32 in bnx2x_handle_classification_eqe() when obtaining the cid value from struct eth_event_data. The fields in struct eth_event_data should all be declared as little-endian and conversions added where missing. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02Input: stmpe-ts - restore kerneldocLinus Walleij
commit e4b88e19897f1039fd83f1630517becafc0dd163 "Input: stmpe-ts - enforce device tree only mode" removed platform data but accidentally stripped away useful kerneldoc, so reintroduce it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: snvs_pwrkey - use __maybe_unused to hide pm functionsArnd Bergmann
The SNVS power key driver has suspend/resume functions that are accessed using SIMPLE_DEV_PM_OPS, which hide the reference when CONFIG_PM_SLEEP is not set, resulting in a warning about unused functions: drivers/input/keyboard/snvs_pwrkey.c:183:12: error: 'imx_snvs_pwrkey_suspend' defined but not used [-Werror=unused-function] drivers/input/keyboard/snvs_pwrkey.c:194:12: error: 'imx_snvs_pwrkey_resume' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: spear-keyboard - use __maybe_unused to hide pm functionsArnd Bergmann
The spear keyboard driver uses #ifdef CONFIG_PM to hide its power management functions, but then uses references from SIMPLE_DEV_PM_OPS that are only present if both CONFIG_PM and CONFIG_PM_SLEEP are set, resulting in a warning about unused functions: drivers/input/keyboard/spear-keyboard.c:292:12: error: 'spear_kbd_suspend' defined but not used [-Werror=unused-function] drivers/input/keyboard/spear-keyboard.c:345:12: error: 'spear_kbd_resume' defined but not used [-Werror=unused-function] This removes the #ifdef and instead uses a __maybe_unused annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: goldfish_events - enable ACPI-based enumeration for goldfish eventsJason Hu
Add ACPI binding to the goldfish events driver. Signed-off-by: Jason Hu <jia-cheng.hu@intel.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Alan <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: goldfish_events - add devicetree bindingsGreg Hackmann
Add device tree bindings to the Goldfish virtual platform event driver. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Alan <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - use input_set_capability()Dmitry Torokhov
Instead of manipulating capability bits directly let's use appropriate helpers. Also there is no need to explicitly set EV_ABS when calling input_set_abs_params(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - convert to use gpiod APIDmitry Torokhov
Instead of using old GPIO API, let's switch to GPIOD API, which automatically handles polarity. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - mark PM methods as __maybe_unusedDmitry Torokhov
Instead of guarding PM methods with #ifdef let's mark them as __maybe_unused as it allows for better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - use threaded irqsTimo Teräs
Convert to use threaded IRQs to support GPIOs that can sleep. Protect the irq handler with mutex as it can be triggered from two different irq lines accessing the same state. This allows using GPIO expanders behind I2C or SPI bus. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02drm/amdgpu: return from atombios_dp_get_dpcd only when errorArindam Nath
In amdgpu_connector_hotplug(), we need to start DP link training only after we have received DPCD. The function amdgpu_atombios_dp_get_dpcd() returns non-zero value only when an error condition is met, otherwise returns zero. So in case the function encounters an error, we need to skip rest of the code and return from amdgpu_connector_hotplug() immediately. Only when we are successfull in reading DPCD pin, we should carry on with turning-on the monitor. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-03-02drm/amdgpu/cz: remove commented out call to enable vce pgAlex Deucher
This code path is not currently enabled now that we properly respect the vce pg flags, so uncomment the actual pg calls so the code is as it should be we are eventually able to enable vce pg. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-02drm/amdgpu/powerplay/cz: enable/disable vce dpm independent of vce pgAlex Deucher
If we don't disable it when vce is not in use, we use extra power if vce pg is disabled. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-02drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabledAlex Deucher
I missed this when cleaning up the vce pg handling. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-02drm/amdgpu/gfx8: specify which engine to wait before vm flushChunming Zhou
Select between me and pfp properly. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-02drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as wellChristian König
We never ported that back to CIK, so we could run into VM faults here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-03-02drm/amd/powerplay: send event to notify powerplay all modules are initialized.Rex Zhu
with this event, powerplay can adjust current power state if needed. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-02drm/amd/powerplay: export AMD_PP_EVENT_COMPLETE_INIT task to amdgpu.Rex Zhu
This is needed to init the dynamic states without a display. To be used in the next commit. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-02drm/radeon/pm: update current crtc info after setting the powerstateAlex Deucher
On CI, we need to see if the number of crtcs changes to determine whether or not we need to upload the mclk table again. In practice we don't currently upload the mclk table again after the initial load. The only reason you would would be to add new states, e.g., for arbitrary mclk setting which is not currently supported. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-03-02drm/amdgpu/pm: update current crtc info after setting the powerstateAlex Deucher
On CI, we need to see if the number of crtcs changes to determine whether or not we need to upload the mclk table again. In practice we don't currently upload the mclk table again after the initial load. The only reason you would would be to add new states, e.g., for arbitrary mclk setting which is not currently supported. Acked-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-03-02vhost: fix error path in vhost_init_used()Greg Kurz
We don't want side effects. If something fails, we rollback vq->is_le to its previous value. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-02virtio-pci: read the right virtio_pci_notify_cap fieldLadi Prosek
Looks like a copy-paste bug. The value is used as an optimization and a wrong value probably isn't causing any serious damage. Found when porting this code to Windows. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-02s390/dasd: fix diag 0x250 inline assemblyHeiko Carstens
git commit 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") added function calls to gather diagnose statistics. In case of the dasd diag driver the function call was added between a register asm statement which initialized register r2 and the inline assembly itself. The function call clobbers the contents of register r2 and therefore the diag 0x250 call behaves in a more or less random way. Fix this by extracting the function call into a separate function like we do everywhere else. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Cc: <stable@vger.kernel.org> # 4.4+ Reported-and-tested-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-02drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)Chris Wilson
commit 09731280028ce03e6a27e1998137f1775a2839f3 Author: Imre Deak <imre.deak@intel.com> Date: Wed Feb 17 14:17:42 2016 +0200 drm/i915: Add helper to get a display power ref if it was already enabled left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as intel_runtime_pm_get_if_in_use() would return true without incrementing the local bookkeeping required for the assertions. Fixes: 09731280028c ("drm/i915: Add helper to get a display power ref if it was already enabled") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> CC: Mika Kuoppala <mika.kuoppala@intel.com> CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456434628-22574-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 135dc79efbc119ea5fb34475996983159e6ca31c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-02drm/i915/skl: Fix power domain suspend sequenceImre Deak
During system suspend we need to first disable power wells then unitialize the display core. In case power well support is disabled we did this in the wrong order, so fix this up. Fixes: d314cd43 ("drm/i915: fix handling of the disable_power_well module option") CC: stable@vger.kernel.org CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-1-git-send-email-imre.deak@intel.com (cherry picked from commit 2622d79bd9d18fd04b650234e6a218c5f95cf308) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-02USB: qcserial: add Sierra Wireless EM74xx device IDBjørn Mork
The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-03-02drm/ast: Fix incorrect register check for DRAM widthTimothy Pearson
During DRAM initialization on certain ASpeed devices, an incorrect bit (bit 10) was checked in the "SDRAM Bus Width Status" register to determine DRAM width. Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05. Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-03-01Merge tag 'usb-ci-v4.5-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: One bug-fix using ID wakeup, this bug is existed once this driver has written.
2016-03-01of_mdio: fix kernel-doc for of_phy_connect()Sergei Shtylyov
The 'flags' parameter of the of_phy_connect() function wasn't described in the kernel-doc comment... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01phy: micrel: Disable auto negotiation on startupAlexandre Belloni
Disable auto negotiation on init to properly detect an already plugged cable at boot. At boot, when the phy is started, it is in the PHY_UP state. However, if a cable is plugged at boot, because auto negociation is already enabled at the time we get the first interrupt, the phy is already running. But the state machine then switches from PHY_UP to PHY_AN and calls phy_start_aneg(). phy_start_aneg() will not do anything because aneg is already enabled on the phy. It will then wait for a interrupt before going further. This interrupt will never happen unless the cable is unplugged and then replugged. It was working properly before 321beec5047a (net: phy: Use interrupts when available in NOLINK state) because switching to NOLINK meant starting polling the phy, even if IRQ were enabled. Fixes: 321beec5047a (net: phy: Use interrupts when available in NOLINK state) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01phy: micrel: Ensure interrupts are reenabled on resumeAlexandre Belloni
At least on ksz8081, when getting back from power down, interrupts are disabled. ensure they are reenabled if they were previously enabled. This fixes resuming which is failing on the xplained boards from atmel since 321beec5047a (net: phy: Use interrupts when available in NOLINK state) Fixes: 321beec5047a (net: phy: Use interrupts when available in NOLINK state) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-29 22:30:32 +0000