| Age | Commit message (Collapse) | Author |
|---|
|
Yet another i2c controller from Renesas that is found on the RZ/V2M
(r9a09g011) SoC. It can support only 100kHz and 400KHz operation.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
[wsa: removed superfluous class type and renamed a function]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Userspace may support more features or new added flags, but the driver
side can be old, so make sure correct flags(features) returned to
userpsace, then userspace can work as expected.
Also mark the 2nd flags as reversed, just use the 1st one. When we run
out of flags, the reserved one can be handled at that time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_destroy_dev() is called for handling error in ublk_add_dev(),
but either tagset isn't allocated or mutex isn't initialized.
So fix the issue by letting replacing ublk_add_dev with a
ublk_add_tag_set function that is much more limited in scope and
instead unwind every single step directly in ublk_ctrl_add_dev.
To allow for this refactor the device freeing so that there is
a helper for freeing the device number instead of coupling that
with freeing the mutex and the memory.
Note that this now copies the dev_info to userspace before adding
the character device. This not only simplifies the erro handling
in ublk_ctrl_add_dev, but also means that the character device
can only be seen by userspace if the device addition succeeded.
Based on a patch from Ming Lei.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a comment about limiting the default the SCSI disk request_queue
max_sectors initial value to that of the SCSI host optimal sectors limit.
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Replace 'the the' with 'the' in the comments.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When building with Clang we encounter the following warning:
| drivers/iommu/msm_iommu.c:603:6: error: format specifies type 'unsigned
| short' but the argument has type 'int' [-Werror,-Wformat] sid);
`sid` is an int, use the proper format specifier `%x`.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220721210331.4012015-1-justinstitt@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.20
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync timeout
- Fix reference count leak on device tree node in Qualcomm driver
|
|
While using the name "SONiX USB DEVICE" for wired mode, my GANSS keyboard
uses "GANSS" for bluetooth mode as well, so adding this to the list.
Signed-off-by: Hilton Chain <hako@ultrarare.space>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
U1_UNICORN_LEGACY id was added to the driver, but was not declared
in the device id table, making it impossible to use.
Fixes: 640e403 ("HID: alps: Add AUI1657 device ID")
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add helpers that can be layered on top of a buffer read from or to be
written to the DSP to faciliate accessing datastructures within the DSP
memory. These functions handle adding the padding bytes for the DSP,
converting to big endian, and packing arbitrary length data.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220722094851.92521-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The code already has a post_stop callback, add a matching pre_stop
callback to the client_ops that is called before execution is stopped.
This callback provides a convenient place for the client code to
communicate with the DSP before it is stopped.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220722094851.92521-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after
an interrupt for a {un-,}correctable error is raised, which disables
the error interrupts. Then the interrupt handler will be called only
once. Therefore, re-enable the error interrupt line at the end of
intr_handler() for v3.x Synopsys EDAC DDR.
Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com
|
|
v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the
ECC Clear Register to disable the error interrupts instead.
Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com
|
|
For wmediumd/virtio, handle both the RX channel for links,
as well as the link addresses when links are added/removed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are two issues here: we need to do the translation
even in case mac80211 selected a link, and we should only
translate the A3 if it's the BSSID. Fix both.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since representors piggy-back on the PF's queues for TX, they can
only accept new TXes while the PF is up. Thus, any operation which
detaches the PF must first detach all its VFreps.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement .ndo_start_xmit() by calling into the parent PF's TX path.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A non-null efv in __ef100_enqueue_skb() indicates that the packet is
from that representor, should be transmitted with a suitable option
descriptor (to instruct the switch to deliver it to the representee),
and should not be accounted to the parent PF's stats or BQL.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An MAE port, or m-port, is a port (source/destination for traffic) on
the Match-Action Engine (the internal switch on EF100).
Representors will use their representee's m-port for two purposes: as
a destination override on TX from the representor, and as a source
match in 'default rules' to steer representee traffic (when not
matched by e.g. a TC flower rule) to representor RX via the parent
PF's receive queue.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Requires storing VF index in struct efx_rep.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No net_device_ops yet, just a placeholder netdev created per VF.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One PCIe function per network port (more precisely, per m-port group) is
responsible for configuring the Match-Action Engine which performs
switching and packet modification in the slice to support flower/OVS
offload. The GRP_MAE bit in the privilege mask indicates whether a
given function has this capability.
At probe time, call MCDIs to read the calling function's privilege mask,
and store the GRP_MAE bit in a new ef100_nic_data member.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The double `close' is duplicated in line 148, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so ecc_dev is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
init_cpu_topology() is called only once at the boot and all the cache
attributes are detected early for all the possible CPUs. However when
the CPUs are hotplugged out, the cacheinfo gets removed. While the
attributes are added back when the CPUs are hotplugged back in as part
of CPU hotplug state machine, it ends up called quite late after the
update_siblings_masks() are called in the secondary_start_kernel()
resulting in wrong llc_sibling_masks.
Move the call to detect_cache_attributes() inside update_siblings_masks()
to ensure the cacheinfo is updated before the LLC sibling masks are
updated. This will fix the incorrect LLC sibling masks generated when
the CPUs are hotplugged out and hotplugged back in again.
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-3-43d696288e84@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, everytime an information needs to be fetched from the PPTT,
the table is mapped via acpi_get_table() and unmapped after the use via
acpi_put_table() which is fine. However we do this at runtime especially
when the CPU is hotplugged out and plugged in back since we re-populate
the cache topology and other information.
However, with the support to fetch LLC information from the PPTT in the
cpuhotplug path which is executed in the atomic context, it is preferred
to avoid mapping and unmapping of the PPTT for every single use as the
acpi_get_table() might sleep waiting for a mutex.
In order to avoid the same, the table is needs to just mapped once on
the boot CPU and is never unmapped allowing it to be used at runtime
with out the hassle of mapping and unmapping the table.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
--
Hi Rafael,
Sorry to bother you again on this PPTT changes. Guenter reported an issue
with lockdep enabled in -next that include my cacheinfo/arch_topology changes
to utilise LLC from PPTT in the CPU hotplug path.
Please ack the change once you are happy so that I can get it merged with
other fixes via Greg's tree.
Regards,
Sudeep
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-2-43d696288e84@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On couple of architectures like RISC-V and ARM64, we need to detect
cache attribues quite early during the boot when the secondary CPUs
start. So we will call detect_cache_attributes in the atomic context
and since use of normal allocation can sleep, we will end up getting
"sleeping in the atomic context" bug splat.
In order avoid that, move the allocation to use atomic version in
preparation to move the actual detection of cache attributes in the
CPU hotplug path which is atomic.
Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-1-43d696288e84@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new device support, cleanup etc for 5.20
Given the slight delay in the likely start of the merge cycle lets get
a few more things in for IIO. A few late breaking fixes also included.
Bulk in number of patches is mechanical conversion to new PM macros.
New device support
* npcm
- Add support for NPCM8XX with different resolution and voltage references
from previously supported parts.
Tree wide
* pm_ptr()/pm_sleep_ptr()/DEFINE_[SIMPLE/RUNTIME]_DEV_PM_OPS() conversions
- Convert all the low hanging fruit to the new macros. The remaining
cases will need more careful consideration.
Tidy-up, fixes and minor features.
* Documentation
- Fix duplicate ABI definitions and a missing blank line to squash all
remaining docs build issues in IIO.
* core
- Make iio_format_avail_range() handle non IIO_VAL_INT cases.
* core/trigger
- Move the setup of trigger->owner to allocation rather than registration.
There doesn't seem to be any advantage in doing this late and a few bugs
have occurred because of mis-balanced module reference counting.
- coding style fix-ups.
* tests
- Allow kunit tests to be built as a module.
* ad7949
- Fix a reversed error message.
* cio-dac
- Use structures for register map to improve readability.
* cros_ec
- Register fifo callback only after the sensor is registered. Closes
a theoretical race.
* hmc5843
- Duplicate word fix.
* isl29028
- Fix mixed devm_ and non devm_ for iio_device_register().
* max1027
- Fix missing unlocks in error paths.
* rm3100
- Let core code handle setting INDIO_BUFFER_TRIGGERED.
* sca3000
- Fix ordering and buffer size issue.
* sx_common
- Don't use the IIO device to get device properties when the parent struct
device is readily available.
- Allow the IIO core to connect up the firmware node.
* stx104
- Use structures for register map to improve readability.
* vf610-adc
- Add compatible entries for imx6ul and imx6sx with fallback to
fsl,vf610-adc.
* tag 'iio-for-5.20b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (65 commits)
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: us5182: Switch from CONFIG_PM guards to pm_ptr() etc
iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
|
Current implementation is not able to configure more than 32 pins
due to incorrect data type. So type casting with unsigned long
to avoid it.
Fixes: 02b3f84d9080 ("xilinx: Switch to use bitmap APIs")
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver uAPI changes:
- All related to the Small BAR support: (and all by Matt Auld)
* add probed_cpu_visible_size
* expose the avail memory region tracking
* apply ALLOC_GPU only by default
* add NEEDS_CPU_ACCESS hint
* tweak error capture on recoverable contexts
Driver highlights:
- Add Small BAR support (Matt)
- Add MeteorLake support (RK)
- Add support for LMEM PCIe resizable BAR (Akeem)
Driver important fixes:
- ttm related fixes (Matt Auld)
- Fix a performance regression related to waitboost (Chris)
- Fix GT resets (Chris)
Driver others:
- Adding GuC SLPC selftest (Vinay)
- Fix ADL-N GuC load (Daniele)
- Add platform workaround (Gustavo, Matt Roper)
- DG2 and ATS-M device ID updates (Matt Roper)
- Add VM_BIND doc rfc with uAPI documentation (Niranjana)
- Fix user-after-free in vma destruction (Thomas)
- Async flush of GuC log regions (Alan)
- Fixes in selftests (Chris, Dan, Andrzej)
- Convert to drm_dbg (Umesh)
- Disable OA sseu config param for newer hardware (Umesh)
- Multi-cast register steering changes (Matt Roper)
- Add lmem_bar_size modparam (Priyanka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ys85pcMYLkqF/HtB@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* amdgpu: Fix for drm buddy memory corruption
* nouveau: PM fixes; DP fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Ytj65+PdAJs4jIEO@linux-uq9g
|
|
Miscellaneous R-Car DU fixes and enhancements
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YtIEWkE0nk/8nhUc@pendragon.ideasonboard.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A scheduling-while-atomic fix for drm/scheduler, a locking fix for TTM,
a typo fix for panel-edp and a resource removal fix for imx/dcss
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721085550.hrwbukj34y56rzva@houat
|
|
In bcm5421_init(), we should call of_node_put() for the reference
returned by of_get_parent() which has increased the refcount.
Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state()
does check for a non-zero return code from xpcs_get_state_c37_sgmii()
and prints that as a message to the kernel log.
However, a non-zero return code from xpcs_read() is translated into
"return false" (i.e. zero as int) and the I/O error is therefore not
printed. Fix that.
Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
can-next 2022-07-21
The patch is by Vincent Mailhol and fixes a use on an uninitialized
variable in the pch_can driver (introduced in last pull request to
net-next).
* tag 'linux-can-next-for-5.20-20220721' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: pch_can: pch_can_error(): initialize errc before using it
====================
Link: https://lore.kernel.org/r/20220721163042.3448384-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The port scanning algorithm in devm_cxl_enumerate_ports() walks up the
topology and adds cxl_port objects starting from the root down to the
endpoint. When those ports are initially created they know all their
dports, but they do not know the downstream cxl_port instance that
represents the next descendant in the topology. Rework create_endpoint()
into devm_cxl_add_endpoint() that enumerates the downstream cxl_port
topology into each port's 'struct cxl_ep' record for each endpoint it
that the port is an ancestor.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-7-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The region provisioning flow involves selecting interleave ways +
granularity settings for a region, and then programming the decoder
topology to meet those constraints, if possible. For example, root
decoders set the minimum interleave ways + granularity for any hosted
regions.
Given decoder programming is not atomic and collisions can occur between
multiple requesting regions userspace will be responsible for conflict
resolution and it needs these attributes to make those decisions.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784332235.1758207.7185062713652694607.stgit@dwillia2-xfh.jf.intel.com
[djbw: reword changelog, make read-only, add sysfs ABI documentaion]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Reduce the complexity and the overhead of walking the topology to
determine endpoint connectivity to root decoder interleave
configurations.
Note that cxl_detach_ep(), after it determines that the last @ep has
departed and decides to delete the port, now needs to walk the dport
array with the device_lock() held to remove entries. Previously
list_splice_init() could be used atomically delete all dport entries at
once and then perform entry tear down outside the lock. There is no
list_splice_init() equivalent for the xarray.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784331647.1758207.6345820282285119339.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for region provisioning that needs to walk the topology
by endpoints, use an xarray to record endpoint interest in a given port.
In addition to being more space and time efficient it also reduces the
complexity of the implementation by moving locking internal to the
xarray implementation. It also allows for a single cxl_ep reference to
be recorded in multiple xarrays.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-2-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
At the time that cxl_port instances are being created, cache the dport
from the parent port that points to this new child port. This will be
useful for region provisioning when walking the tree to calculate
decoder targets, and saves rewalking the dport list after the fact to
build this information.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Recall that the primary role of the cxl_mem driver is to probe if the
given endpoint is connected to a CXL port topology. In that process it
walks its device ancestry to its PCI root port. If that root port is
also a CXL root port then the probe process adds cxl_port object
instances at switch in the path between to the root and the endpoint. As
those cxl_port instances are added, or if a previous enumeration
attempt already created the port, a 'struct cxl_ep' instance is
registered with that port to track the endpoints interested in that
port.
At the time the cxl_ep is registered the downstream egress path from the
port to the endpoint is known. Take the opportunity to record that
information as it will be needed for dynamic programming of decoder
targets during region provisioning.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784329944.1758207.15203961796832072116.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The region provisioning flow will roughly follow a sequence of:
1/ Allocate DPA to a set of decoders
2/ Allocate HPA to a region
3/ Associate decoders with a region and validate that the DPA allocations
and topologies match the parameters of the region.
For now, this change (step 1) arranges for DPA capacity to be allocated
and deleted from non-committed decoders based on the decoder's mode /
partition selection. Capacity is allocated from the lowest DPA in the
partition and any 'pmem' allocation blocks out all remaining ram
capacity in its 'skip' setting. DPA allocations are enforced in decoder
instance order. I.e. decoder N + 1 always starts at a higher DPA than
instance N, and deleting allocations must proceed from the
highest-instance allocated decoder to the lowest.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784329399.1758207.16732038126938632700.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL specification enforces that endpoint decoders are committed in
hw instance id order. In preparation for adding dynamic DPA allocation,
record the hw instance id in endpoint decoders, and enforce allocations
to occur in hw instance id order.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784328827.1758207.9627538529944559954.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Recall that the Device Physical Address (DPA) space of a CXL Memory
Expander is potentially partitioned into a volatile and persistent
portion. A decoder maps a Host Physical Address (HPA) range to a DPA
range and that translation depends on the value of all previous (lower
instance number) decoders before the current one.
In preparation for allowing dynamic provisioning of regions, decoders
need an ABI to indicate which DPA partition a decoder targets. This ABI
needs to be prepared for the possibility that some other agent committed
and locked a decoder that spans the partition boundary.
Add 'decoderX.Y/mode' to endpoint decoders that indicates which
partition 'ram' / 'pmem' the decoder targets, or 'mixed' if the decoder
currently spans the partition boundary.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603881967.551046.6007594190951596439.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
