summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-11-11Merge tag 'drm-fixes-20221109' of git://linuxtv.org/pinchartl/media into ↵Dave Airlie
drm-fixes R-Car DSI Kconfig dependency fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y2u8+uM4A006XRPh@pendragon.ideasonboard.com
2022-11-11Merge tag 'drm-misc-fixes-2022-11-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.1-rc5: - HDMI fixes to vc4. - Make panfrost's uapi header compile with C++. - Add rotation quirks for 2 panels. - Fix s/r in amdgpu_vram_mgr_new - Handle 1 gb boundary correctly in panfrost mmu code. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e02de501-4b85-28a0-3f6e-751ca13f5f9d@linux.intel.com
2022-11-10vfio/pci: Check the device set open count on resetAnthony DeRossi
vfio_pci_dev_set_needs_reset() inspects the open_count of every device in the set to determine whether a reset is allowed. The current device always has open_count == 1 within vfio_pci_core_disable(), effectively disabling the reset logic. This field is also documented as private in vfio_device, so it should not be used to determine whether other devices in the set are open. Checking for vfio_device_set_open_count() > 1 on the device set fixes both issues. After commit 2cd8b14aaa66 ("vfio/pci: Move to the device set infrastructure"), failure to create a new file for a device would cause the reset to be skipped due to open_count being decremented after calling close_device() in the error path. After commit eadd86f835c6 ("vfio: Remove calls to vfio_group_add_container_user()"), releasing a device would always skip the reset due to an ordering change in vfio_device_fops_release(). Failing to reset the device leaves it in an unknown state, potentially causing errors when it is accessed later or bound to a different driver. This issue was observed with a Radeon RX Vega 56 [1002:687f] (rev c3) assigned to a Windows guest. After shutting down the guest, unbinding the device from vfio-pci, and binding the device to amdgpu: [ 548.007102] [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed! [ 548.027174] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed [ 548.027242] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22 [ 548.027306] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_init failed [ 548.027308] amdgpu 0000:0a:00.0: amdgpu: Fatal error during GPU init Fixes: 2cd8b14aaa66 ("vfio/pci: Move to the device set infrastructure") Fixes: eadd86f835c6 ("vfio: Remove calls to vfio_group_add_container_user()") Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20221110014027.28780-4-ajderossi@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-11-10vfio: Export the device set open countAnthony DeRossi
The open count of a device set is the sum of the open counts of all devices in the set. Drivers can use this value to determine whether shared resources are in use without tracking them manually or accessing the private open_count in vfio_device. Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20221110014027.28780-3-ajderossi@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-11-10vfio: Fix container device registration life cycleAnthony DeRossi
In vfio_device_open(), vfio_device_container_register() is always called when open_count == 1. On error, vfio_device_container_unregister() is only called when open_count == 1 and close_device is set. This leaks a registration for devices without a close_device implementation. In vfio_device_fops_release(), vfio_device_container_unregister() is called unconditionally. This can cause a device to be unregistered multiple times. Treating container device registration/unregistration uniformly (always when open_count == 1) fixes both issues. Fixes: ce4b4657ff18 ("vfio: Replace the DMA unmapping notifier with a callback") Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20221110014027.28780-2-ajderossi@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-11-10greybus: svc: Use kstrtobool() instead of strtobool()Christophe JAILLET
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/ebf1e6988a53a455990230a37cf759ee542ea7ec.1667336095.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10misc: smpro-misc: Add Ampere's Altra SMpro misc driverQuan Nguyen
Add driver support for accessing various information reported by Ampere's SMpro co-processor such as Boot Progress and other miscellaneous data. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20221031024442.2490881-4-quan@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10misc: smpro-errmon: Add Ampere's SMpro error monitor driverQuan Nguyen
Add Ampere's SMpro error monitor driver for monitoring and reporting RAS-related errors as reported by SMpro co-processor found on Ampere's Altra processor family. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20221031024442.2490881-3-quan@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10drivers: bus: simple-pm-bus: Use clocksLiu Ying
Simple Power-Managed bus controller may need functional clock(s) to be enabled before child devices connected to the bus can be accessed. Get the clock(s) as a bulk and enable/disable the clock(s) when the bus is being power managed. One example is that Freescale i.MX8qxp pixel link MSI bus controller needs MSI clock and AHB clock to be enabled before accessing child devices. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20221017074039.4181843-2-victor.liu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10uio: uio_dmem_genirq: Use non-atomic bit operations in irq config and handlingRafael Mendonca
This finishes the port of the irq configuration and handling from "uio_pdrv_genirq" to "uio_dmem_genirq". It changes the atomic bit-manipulation routines to their non-atomic counterparts as we are already guarding the code by spinlock. Split out from commit 34cb27528398 ("UIO: Fix concurrency issue"). Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Link: https://lore.kernel.org/r/20220930224100.816175-4-rafaelmendsr@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10uio: uio_dmem_genirq: Fix deadlock between irq config and handlingRafael Mendonca
This fixes a concurrency issue addressed in commit 34cb27528398 ("UIO: Fix concurrency issue"): "In a SMP case there was a race condition issue between Uio_pdrv_genirq_irqcontrol() running on one CPU and irq handler on another CPU. Fix it by spin_locking shared resources access inside irq handler." The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and it is used in a similar manner to the "uio_pdrv_genirq" driver with respect to interrupt configuration and handling. At the time "uio_dmem_genirq" was merged, both had the same implementation of the 'uio_info' handlers irqcontrol() and handler(), thus, both had the same concurrency issue mentioned by the above commit. However, the above patch was only applied to the "uio_pdrv_genirq" driver. Split out from commit 34cb27528398 ("UIO: Fix concurrency issue"). Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Link: https://lore.kernel.org/r/20220930224100.816175-3-rafaelmendsr@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10uio: uio_dmem_genirq: Fix missing unlock in irq configurationRafael Mendonca
Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") started calling disable_irq() without holding the spinlock because it can sleep. However, that fix introduced another bug: if interrupt is already disabled and a new disable request comes in, then the spinlock is not unlocked: root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0 root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0 root@localhost:~# [ 14.851538] BUG: scheduling while atomic: bash/223/0x00000002 [ 14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc] [ 14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G OE 6.0.0-rc7 #21 [ 14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 14.855664] Call Trace: [ 14.855861] <TASK> [ 14.856025] dump_stack_lvl+0x4d/0x67 [ 14.856325] dump_stack+0x14/0x1a [ 14.856583] __schedule_bug.cold+0x4b/0x5c [ 14.856915] __schedule+0xe81/0x13d0 [ 14.857199] ? idr_find+0x13/0x20 [ 14.857456] ? get_work_pool+0x2d/0x50 [ 14.857756] ? __flush_work+0x233/0x280 [ 14.858068] ? __schedule+0xa95/0x13d0 [ 14.858307] ? idr_find+0x13/0x20 [ 14.858519] ? get_work_pool+0x2d/0x50 [ 14.858798] schedule+0x6c/0x100 [ 14.859009] schedule_hrtimeout_range_clock+0xff/0x110 [ 14.859335] ? tty_write_room+0x1f/0x30 [ 14.859598] ? n_tty_poll+0x1ec/0x220 [ 14.859830] ? tty_ldisc_deref+0x1a/0x20 [ 14.860090] schedule_hrtimeout_range+0x17/0x20 [ 14.860373] do_select+0x596/0x840 [ 14.860627] ? __kernel_text_address+0x16/0x50 [ 14.860954] ? poll_freewait+0xb0/0xb0 [ 14.861235] ? poll_freewait+0xb0/0xb0 [ 14.861517] ? rpm_resume+0x49d/0x780 [ 14.861798] ? common_interrupt+0x59/0xa0 [ 14.862127] ? asm_common_interrupt+0x2b/0x40 [ 14.862511] ? __uart_start.isra.0+0x61/0x70 [ 14.862902] ? __check_object_size+0x61/0x280 [ 14.863255] core_sys_select+0x1c6/0x400 [ 14.863575] ? vfs_write+0x1c9/0x3d0 [ 14.863853] ? vfs_write+0x1c9/0x3d0 [ 14.864121] ? _copy_from_user+0x45/0x70 [ 14.864526] do_pselect.constprop.0+0xb3/0xf0 [ 14.864893] ? do_syscall_64+0x6d/0x90 [ 14.865228] ? do_syscall_64+0x6d/0x90 [ 14.865556] __x64_sys_pselect6+0x76/0xa0 [ 14.865906] do_syscall_64+0x60/0x90 [ 14.866214] ? syscall_exit_to_user_mode+0x2a/0x50 [ 14.866640] ? do_syscall_64+0x6d/0x90 [ 14.866972] ? do_syscall_64+0x6d/0x90 [ 14.867286] ? do_syscall_64+0x6d/0x90 [ 14.867626] entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] stripped [ 14.872959] </TASK> ('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this) The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and it is used in a similar manner to the "uio_pdrv_genirq" driver with respect to interrupt configuration and handling. At the time "uio_dmem_genirq" was introduced, both had the same implementation of the 'uio_info' handlers irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency issue"), which was only applied to "uio_pdrv_genirq", ended up making them a little different. That commit, among other things, changed disable_irq() to disable_irq_nosync() in the implementation of irqcontrol(). The motivation there was to avoid a deadlock between irqcontrol() and handler(), since it added a spinlock in the irq handler, and disable_irq() waits for the completion of the irq handler. By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also avoid the sleeping-while-atomic bug that commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") was trying to fix. Thus, this fixes the missing unlock in irqcontrol() by importing the implementation of irqcontrol() handler from the "uio_pdrv_genirq" driver. In the end, it reverts commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") and change disable_irq() to disable_irq_nosync(). It is worth noting that this still does not address the concurrency issue fixed by commit 34cb27528398 ("UIO: Fix concurrency issue"). It will be addressed separately in the next commits. Split out from commit 34cb27528398 ("UIO: Fix concurrency issue"). Fixes: b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Link: https://lore.kernel.org/r/20220930224100.816175-2-rafaelmendsr@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10firmware: google: Implement cbmem in sysfs driverJack Rosenthal
The CBMEM area is a downward-growing memory region used by coreboot to dynamically allocate tagged data structures ("CBMEM entries") that remain resident during boot. This implements a driver which exports access to the CBMEM entries via sysfs under /sys/bus/coreboot/devices/cbmem-<id>. This implementation is quite versatile. Examples of how it could be used are given below: * Tools like util/cbmem from the coreboot tree could use this driver instead of finding CBMEM in /dev/mem directly. Alternatively, firmware developers debugging an issue may find the sysfs interface more ergonomic than the cbmem tool and choose to use it directly. * The crossystem tool, which exposes verified boot variables, can use this driver to read the vboot work buffer. * Tools which read the BIOS SPI flash (e.g., flashrom) can find the flash layout in CBMEM directly, which is significantly faster than searching the flash directly. Write access is provided to all CBMEM regions via /sys/bus/coreboot/devices/cbmem-<id>/mem, as the existing cbmem tooling updates this memory region, and envisioned use cases with crossystem can benefit from updating memory regions. Link: https://issuetracker.google.com/239604743 Cc: Stephen Boyd <swboyd@chromium.org> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: Jack Rosenthal <jrosenth@chromium.org> Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Link: https://lore.kernel.org/r/20221104161528.531248-1-jrosenth@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10firmware: coreboot: Register bus in module initBrian Norris
The coreboot_table driver registers a coreboot bus while probing a "coreboot_table" device representing the coreboot table memory region. Probing this device (i.e., registering the bus) is a dependency for the module_init() functions of any driver for this bus (e.g., memconsole-coreboot.c / memconsole_driver_init()). With synchronous probe, this dependency works OK, as the link order in the Makefile ensures coreboot_table_driver_init() (and thus, coreboot_table_probe()) completes before a coreboot device driver tries to add itself to the bus. With asynchronous probe, however, coreboot_table_probe() may race with memconsole_driver_init(), and so we're liable to hit one of these two: 1. coreboot_driver_register() eventually hits "[...] the bus was not initialized.", and the memconsole driver fails to register; or 2. coreboot_driver_register() gets past #1, but still races with bus_register() and hits some other undefined/crashing behavior (e.g., in driver_find() [1]) We can resolve this by registering the bus in our initcall, and only deferring "device" work (scanning the coreboot memory region and creating sub-devices) to probe(). [1] Example failure, using 'driver_async_probe=*' kernel command line: [ 0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63 [ 0.114316] Hardware name: Google Scarlet (DT) ... [ 0.114488] Call trace: [ 0.114494] _raw_spin_lock+0x34/0x60 [ 0.114502] kset_find_obj+0x28/0x84 [ 0.114511] driver_find+0x30/0x50 [ 0.114520] driver_register+0x64/0x10c [ 0.114528] coreboot_driver_register+0x30/0x3c [ 0.114540] memconsole_driver_init+0x24/0x30 [ 0.114550] do_one_initcall+0x154/0x2e0 [ 0.114560] do_initcall_level+0x134/0x160 [ 0.114571] do_initcalls+0x60/0xa0 [ 0.114579] do_basic_setup+0x28/0x34 [ 0.114588] kernel_init_freeable+0xf8/0x150 [ 0.114596] kernel_init+0x2c/0x12c [ 0.114607] ret_from_fork+0x10/0x20 [ 0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01) [ 0.114631] ---[ end trace 0000000000000000 ]--- Fixes: b81e3140e412 ("firmware: coreboot: Make bus registration symmetric") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-envChristian Lamparter
The Western Digital MyBook Live (PowerPC 464/APM82181) has a set of redundant u-boot-env. Loading up the driver the following error: | u_boot_env: Invalid calculated CRC32: 0x4f8f2c86 (expected: 0x98b14514) | u_boot_env: probe of partition@1e000 failed with error -22 Looking up the userspace libubootenv utilities source [0], it looks like the "mark" or "flag" is not part of the crc32 sum... which is unfortunate :( |static int libuboot_load(struct uboot_ctx *ctx) |{ |[...] | if (ctx->redundant) { | [...] | offsetdata = offsetof(struct uboot_env_redund, data); | [...] //-----^^ | } | usable_envsize = ctx->size - offsetdata; | buf[0] = malloc(bufsize); |[...] | for (i = 0; i < copies; i++) { | data = (uint8_t *)(buf[i] + offsetdata); | uint32_t crc; | | ret = devread(ctx, i, buf[i]); | [...] | crc = *(uint32_t *)(buf[i] + offsetcrc); | dev->crc = crc32(0, (uint8_t *)data, usable_envsize); | [0] https://github.com/sbabic/libubootenv/blob/master/src/uboot_env.c#L951 Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/70a16eae113e08db2390b76e174f4837caa135c3.1667580636.git.chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && ↵Zheng Bin
CONFIG_QCOM_RPROC_COMMON=m If CONFIG_SLIM_QCOM_NGD_CTRL=y, CONFIG_QCOM_RPROC_COMMON=m, COMPILE_TEST=y, bulding fails: drivers/slimbus/qcom-ngd-ctrl.o: In function `qcom_slim_ngd_ctrl_probe': qcom-ngd-ctrl.c:(.text+0x330): undefined reference to `qcom_register_ssr_notifier' qcom-ngd-ctrl.c:(.text+0x5fc): undefined reference to `qcom_unregister_ssr_notifier' drivers/slimbus/qcom-ngd-ctrl.o: In function `qcom_slim_ngd_remove': qcom-ngd-ctrl.c:(.text+0x90c): undefined reference to `qcom_unregister_ssr_notifier' Make SLIM_QCOM_NGD_CTRL depends on QCOM_RPROC_COMMON || (COMPILE_TEST && !QCOM_RPROC_COMMON) to fix this. Fixes: e291691c6977 ("slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMON") Cc: stable <stable@kernel.org> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221027095904.3388959-1-zhengbin13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10slimbus: stream: correct presence rate frequenciesKrzysztof Kozlowski
Correct few frequencies in presence rate table - multiplied by 10 (110250 instead of 11025 Hz). Fixes: abb9c9b8b51b ("slimbus: stream: add stream support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220929165202.410937-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10nvmem: lan9662-otp: Fix compatible stringHoratiu Vultur
The device tree bindings for lan9662-otp expects the compatible string to be one of following compatible strings: microchip,lan9662-otpc microchip,lan9668-otpc The problem is that the lan9662-otp driver contains the microchip,lan9662-otp compatible string instead of microchip,lan9662-otpc. Fix this by updating the compatible string in the driver. Fixes: 9e8f208ad5229d ("nvmem: lan9662-otp: add support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220928195112.630351-1-horatiu.vultur@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10uio: uio_fsl_elbc_gpcm: Replace NO_IRQ by 0Christophe Leroy
NO_IRQ is used to check the return of irq_of_parse_and_map(). On some architecture NO_IRQ is 0, on other architectures it is -1. irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ. So use 0 instead of using NO_IRQ. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/68ccdf51811ab26bdb452babf17ae860fa4900c2.1665034535.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10misc: genwqe: card_base: Fix some kernel-doc warningsBo Liu
Fixes the following W=1 kernel build warning(s): drivers/misc/genwqe/card_base.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Signed-off-by: Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20221031063557.2710-1-liubo03@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10spmi: pmic-arb: Add support for PMIC v7David Collins
PMIC v7 has different offset values and seqeunces, so add support for this new version of PMIC Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8450 HDK Acked-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221110100755.4032505-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10virt: fsl_hypervisor: Replace NO_IRQ by 0Christophe Leroy
NO_IRQ is used to check the return of irq_of_parse_and_map(). On some architecture NO_IRQ is 0, on other architectures it is -1. irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ. So use 0 instead of using NO_IRQ. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20dd37b96bac0a72caef28e7462b32c93487a516.1665033909.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10Merge tag 'soundwire-6.1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fixes from Vinod Koul: "Two qcom driver fixes for broadcast completion reinit and check for outanding writes. And a lone Intel driver fix for clock stop timeout" * tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: qcom: check for outanding writes before doing a read soundwire: qcom: reinit broadcast completion soundwire: intel: Initialize clock stop timeout
2022-11-10Merge tag 'phy-fixes-6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: "A bunch of odd driver fixes and a MAINTAINER email update: - Update Kishon's email - stms32 error code fix in driver probe - tegra: fix for checking valid pointer - qcom_qmp: null deref fix - sunplus: error check fix - ralink: add missing sentinel to table" * tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ralink: mt7621-pci: add sentinel to quirks table phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe phy: qcom-qmp-combo: fix NULL-deref on runtime resume phy: tegra: xusb: Fix crash during pad power on/down phy: stm32: fix an error code in probe MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK
2022-11-10Merge tag 'hwlock-v6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock updates from Bjorn Andersson: "I apparently had missed tagging and sending this set of changes out during the 6.1 merge window. But did get the associated dts changes depending on this merged. The result is a regression in 6.1-rc on the affected, older, Qualcomm platforms - in for form of them not booting. So while these weren't regression fixes originally, they are now. It's not introducing new beahavior, but simply extending the existing new Devicetree model, to cover remaining platforms: - extend the DeviceTree binding and implementation for the Qualcomm hardware spinlock on some older platforms to follow the style of the newer ones where the DeviceTree representation does not rely on an intermediate syscon node" * tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974 hwspinlock: qcom: add support for MMIO on older SoCs hwspinlock: qcom: correct MMIO max register for newer SoCs dt-bindings: hwlock: qcom-hwspinlock: correct example indentation dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs
2022-11-10drm/panel: simple: set bpc field for logic technologies displaysAishwarya Kothari
In case bpc is not set for a panel it then throws a WARN(). Add bpc to the panels logictechno_lt170410_2whc and logictechno_lt161010_2nh. Fixes: 5728fe7fa539 ("drm/panel: simple: add display timings for logic technologies displays") Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831141622.39605-1-francesco.dolcini@toradex.com
2022-11-10net: macvlan: fix memory leaks of macvlan_common_newlinkChuang Wang
kmemleak reports memory leaks in macvlan_common_newlink, as follows: ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR> kmemleak reports: unreferenced object 0xffff8880109bb140 (size 64): comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z..... 80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk backtrace: [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300 [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0 [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170 [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0 [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20 [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50 [<ffffffff81d98278>] rtnl_newlink+0x48/0x70 ... In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up. Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up. Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.") Signed-off-by: Chuang Wang <nashuiliang@gmail.com> Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10ethernet: tundra: free irq when alloc ring failed in tsi108_open()Zhengchao Shao
When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix it. Fixes: 5e123b844a1c ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()Zhengchao Shao
When failed to init rxq or txq in mv643xx_eth_open() for opening device, napi isn't disabled. When open mv643xx_eth device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 2257e05c1705 ("mv643xx_eth: get rid of receive-side locking") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10ethernet: s2io: disable napi when start nic failed in s2io_card_up()Zhengchao Shao
When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only. Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10drm/vc4: kms: Fix IS_ERR() vs NULL check for vc4_kmsGaosheng Cui
The drm_atomic_get_new_private_obj_state() function returns NULL on error path, drm_atomic_get_old_private_obj_state() function returns NULL on error path, too, they does not return error pointers. By the way, vc4_hvs_get_new/old_global_state() should return ERR_PTR(-EINVAL), otherwise there will be null-ptr-defer issue, such as follows: In function vc4_atomic_commit_tail(): |-- old_hvs_state = vc4_hvs_get_old_global_state(state); <-- return NULL |-- if (WARN_ON(IS_ERR(old_hvs_state))) <-- no return |-- unsigned long state_rate = max(old_hvs_state->core_clock_rate, new_hvs_state->core_clock_rate); <-- null-ptr-defer Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221110094445.2930509-6-cuigaosheng1@huawei.com
2022-11-10pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_mapZeng Heng
Here is the BUG report by KASAN about null pointer dereference: BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer. Fixes: 57291ce295c0 ("pinctrl: core device tree mapping table parsing support") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20221110082056.2014898-1-zengheng4@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-10net: atlantic: macsec: clear encryption keys from the stackAntoine Tenart
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the atlantic driver made a copy and did not clear it. Fix this. [4 Fixes tags below, all part of the same series, no need to split this] Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation") Fixes: b8f8a0b7b5cb ("net: atlantic: MACSec ingress offload HW bindings") Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation") Fixes: 9d106c6dd81b ("net: atlantic: MACSec egress offload HW bindings") Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10net: phy: mscc: macsec: clear encryption keys when freeing a flowAntoine Tenart
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the MSCC PHY driver made a copy, kept it in the flow data and did not clear it when freeing a flow. Fix this. Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10stmmac: dwmac-loongson: fix missing of_node_put() while module exitingYang Yingliang
The node returned by of_get_child_by_name() with refcount decremented, of_node_put() needs be called when finish using it. So add it in the error path in loongson_dwmac_probe() and in loongson_dwmac_remove(). Fixes: 2ae34111fe4e ("stmmac: dwmac-loongson: fix invalid mdio_node") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10stmmac: dwmac-loongson: fix missing pci_disable_device() in ↵Yang Yingliang
loongson_dwmac_probe() Add missing pci_disable_device() in the error path in loongson_dwmac_probe(). Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exitingYang Yingliang
pci_enable_msi() has been called in loongson_dwmac_probe(), so pci_disable_msi() needs be called in remove path and error path of probe(). Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10Merge tag 'amd-drm-fixes-6.1-2022-11-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-11-09: amdgpu: - SMU 13.0.4 update - GPUVM TLB race fix - DCN 3.1.4 fixes - DCN 3.2.x fixes - Vega10 fan fix - BACO fix for Beige Goby board - PSR fix - GPU VM PT locking fixes amdkfd: - CRIU fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109234554.6028-1-alexander.deucher@amd.com
2022-11-09cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in ↵Zhengchao Shao
cxgb4vf_open() When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied during adapter goes up are not cleared. Fix it. Only be compiled, not be tested. Fixes: 18d79f721e0a ("cxgb4vf: Update port information in cxgb4vf_open()") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109012100.99132-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHzTan, Tee Min
Current Intel platform has an output of ~976ms interval when probed on 1 Pulse-per-Second(PPS) hardware pin. The correct PTP clock frequency for PCH GbE should be 204.8MHz instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz. Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform") Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com> Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com> Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()Zhengchao Shao
When failed to bind qsets in cxgb_up() for opening device, napi isn't disabled. When open cxgb3 device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09net: cpsw: disable napi in cpsw_ndo_open()Zhengchao Shao
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for opening device, napi isn't disabled. When open cpsw device next time, it will report a invalid opcode issue. Compiled tested only. Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09drm/amd/display: only fill dirty rectangles when PSR is enabledHamza Mahfooz
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't supported by the relevant link in amdgpu_dm_commit_planes(), this is undesirable especially because when drm.debug is enabled we are printing messages in fill_dc_dirty_rects() that are only useful for debugging PSR (and confusing otherwise). So, we can instead limit the filling of dirty rectangles to only when PSR is enabled. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amdgpu: disable BACO on special BEIGE_GOBY cardGuchun Chen
Still avoid intermittent failure. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-09drm/amdgpu: Drop eviction lock when allocating PT BOPhilip Yang
Re-take the eviction lock immediately again after the allocation is completed, to fix circular locking warning with drm_buddy allocator. Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are called from multiple files. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amdgpu: Unlock bo_list_mutex after error handlingPhilip Yang
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest application. If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the kernel WARNING. Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to cleanup bo_list userptr bo. WARNING: kfdtest/2930 still has locks held! 1 lock held by kfdtest/2930: (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu] stack backtrace: dump_stack_lvl+0x44/0x57 get_signal+0x79f/0xd00 arch_do_signal_or_restart+0x36/0x7b0 exit_to_user_mode_prepare+0xfd/0x1b0 syscall_exit_to_user_mode+0x19/0x40 do_syscall_64+0x40/0x80 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 ↵Asher Song
properly"" This reverts commit 4545ae2ed3f2f7c3f615a53399c9c8460ee5bca7. The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine. Test failure is caused by test case self. Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32Dillon Varone
[WHY?] Data return times when using lowest memclk can be <= 60us, which can cause underflow on high bandwidth displays with a workload. [HOW?] Enforce a minimum prefetch time during validation for low memclk modes. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Fix gpio port mapping issueSteve Su
[Why] 1. Port of gpio has different mapping. [How] 1. Add a dummy entry in mapping table. 2. Fix incorrect mask bit field access. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Steve Su <steve.su@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Fix reg timeout in enc314_enable_fifoNicholas Kazlauskas
[Why] The link enablement sequence can end up resetting the encoder while the PHY symclk isn't yet on. This means that waiting for symclk on will timeout, along with the reset bit never asserting high. This causes unnecessary delay when enabling the link and produces a warning affecting multiple IGT tests. [How] Don't wait for the symclk to be on here because firmware already does. Don't wait for reset if we know the symclk isn't on. Split the reset into a helper function that checks the bit and decides whether or not a delay is sufficient. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
generated by cgit (git 2.34.1) at 2025-09-14 16:51:26 +0000