| Age | Commit message (Collapse) | Author |
|---|
|
A system crashes when continuously removing/re-adding the storage
controller.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When aacraid init fails with "AAC0: adapter self-test failed.", shutdown
leads to UBSAN warning and then oops:
[154316.118423] ================================================================================
[154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27
[154316.118566] member access within null pointer of type 'struct Scsi_Host'
[154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G W 4.15.0-dirty #89
[154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003
[154316.118774] Call Trace:
[154316.118848] dump_stack+0x48/0x65
[154316.118916] ubsan_epilogue+0xe/0x40
[154316.118976] __ubsan_handle_type_mismatch+0xfb/0x180
[154316.119043] scsi_block_requests+0x20/0x30
[154316.119135] aac_shutdown+0x18/0x40 [aacraid]
[154316.119196] pci_device_shutdown+0x33/0x50
[154316.119269] device_shutdown+0x18a/0x390
[...]
[154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4
[154316.123515] IP: scsi_block_requests+0xa/0x30
This is because aac_shutdown() does
struct Scsi_Host *shost = pci_get_drvdata(dev);
scsi_block_requests(shost);
and that assumes shost has been assigned with pci_set_drvdata().
However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far
after bailing out with error from calling the init function
((*aac_drivers[index].init)(aac)), and when the init function fails, no
error is returned from aac_probe_one() so PCI layer assumes there is
driver attached, and tries to shut it down later.
Fix it by returning error from aac_probe_one() when card-specific init
function fails.
This fixes reboot on my HP NetRAID-4M with dead battery.
Signed-off-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The data in NVRAM is not guaranteed to be NUL terminated. Since
snprintf expects byte-stream to accommodate null byte, the CHAP secret
is truncated. Use sprintf instead of snprintf to fix the truncation of
CHAP name and secret.
Signed-off-by: Andrew Vasquez <andrew.vasquez@cavium.com>
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch fixes incorrect handle used for abort IOCB.
Fixes: b027a5ace443 ("scsi: qla2xxx: Fix queue ID for async abort with Multiqueue")
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch is based on Max's original patch.
When the qla2xxx firmware is unavailable, eventually
qla2x00_sp_timeout() is reached, which calls the timeout function and
frees the srb_t instance.
The timeout function always resolves to qla2x00_async_iocb_timeout(),
which invokes another callback function called "done". All of these
qla2x00_*_sp_done() callbacks also free the srb_t instance; after
returning to qla2x00_sp_timeout(), it is freed again.
The fix is to remove the "sp->free(sp)" call from qla2x00_sp_timeout()
and add it to those code paths in qla2x00_async_iocb_timeout() which
do not already free the object.
This is how it looks like with KASAN:
BUG: KASAN: use-after-free in qla2x00_sp_timeout+0x228/0x250
Read of size 8 at addr ffff88278147a590 by task swapper/2/0
Allocated by task 1502:
save_stack+0x33/0xa0
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc+0xb8/0x1c0
mempool_alloc+0xd6/0x260
qla24xx_async_gnl+0x3c5/0x1100
Freed by task 0:
save_stack+0x33/0xa0
kasan_slab_free+0x72/0xc0
kmem_cache_free+0x75/0x200
qla24xx_async_gnl_sp_done+0x556/0x9e0
qla2x00_async_iocb_timeout+0x1c7/0x420
qla2x00_sp_timeout+0x16d/0x250
call_timer_fn+0x36/0x200
The buggy address belongs to the object at ffff88278147a440
which belongs to the cache qla2xxx_srbs of size 344
The buggy address is located 336 bytes inside of
344-byte region [ffff88278147a440, ffff88278147a598)
Reported-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: Max Kellermann <mk@cm4all.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Increase cmd_per_lun to allow more I/Os in progress per device,
particularly for NVMe's. The Hyper-V host side can handle the higher
count with no issues.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix one typo of render_mmio trace, exchange the mmio value of old and new.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
GGTT is in BAR0 with 8 bytes aligned. With a qemu patch (commit:
38d49e8c1523d97d2191190d3f7b4ce7a0ab5aa3), VFIO can use 8-byte reads/
writes to access it.
This patch is to support the 8-byte GGTT reads/writes.
Ideally, we would like to support 8-byte reads/writes for the total BAR0.
But it needs more work for handling 8-byte MMIO reads/writes.
This patch can fix the issue caused by partial updating GGTT entry, during
guest booting up.
v3:
- Use intel_vgpu_get_bar_gpa() stead. (Zhenyu)
- Include all the GGTT checking logic in gtt_entry(). (Zhenyu)
v2:
- Limit to GGTT entry. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Guest may set this register on KBL platform, it can impact hardware
behavior, so add it into the gen9 render list. Otherwise gpu hang issue may
happen during different vgpu switch.
v2: separate it from patch set.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
As we peek inside struct device to query members guarded by CONFIG_PM,
so must be the code.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207160428.17015-1-chris@chris-wilson.co.uk
(cherry picked from commit 05273c950a3c93c5f96be8807eaf24f2cc9f1c1e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-4-tvrtko.ursulin@linux.intel.com
|
|
We are not allowed to call intel_runtime_pm_get from the PMU counter read
callback since the former can sleep, and the latter is running under IRQ
context.
To workaround this, we record the last known RC6 and while runtime
suspended estimate its increase by querying the runtime PM core
timestamps.
Downside of this approach is that we can temporarily lose a chunk of RC6
time, from the last PMU read-out to runtime suspend entry, but that will
eventually catch up, once device comes back online and in the presence of
PMU queries.
Also, we have to be careful not to overshoot the RC6 estimate, so once
resumed after a period of approximation, we only update the counter once
it catches up. With the observation that RC6 is increasing while the
device is suspended, this should not pose a problem and can only cause
slight inaccuracies due clock base differences.
v2: Simplify by estimating on top of PM core counters. (Imre)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104943
Fixes: 6060b6aec03c ("drm/i915/pmu: Add RC6 residency metrics")
Testcase: igt/perf_pmu/rc6-runtime-pm
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206183311.17924-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 1fe699e30113ed6f6e853ff44710d256072ea627)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-3-tvrtko.ursulin@linux.intel.com
|
|
Commit 99e48bf98dd0 ("drm/i915: Lock out execlist tasklet while peeking
inside for busy-stats") added a tasklet_disable call in busy stats
enabling, but we failed to understand that the PMU enable callback runs
as an hard IRQ (IPI).
Consequence of this is that the PMU enable callback can interrupt the
execlists tasklet, and will then deadlock when it calls
intel_engine_stats_enable->tasklet_disable.
To fix this, I realized it is possible to move the engine stats enablement
and disablement to PMU event init and destroy hooks. This allows for much
simpler implementation since those hooks run in normal context (can
sleep).
v2: Extract engine_event_destroy. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 99e48bf98dd0 ("drm/i915: Lock out execlist tasklet while peeking inside for busy-stats")
Testcase: igt/perf_pmu/enable-race-*
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205093448.13877-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit b2f78cda260bc6a1a2d382b1d85a29e69b5b3724)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-2-tvrtko.ursulin@linux.intel.com
|
|
In order to prevent a race condition where we may end up overaccounting
the active state and leaving the busy-stats believing the GPU is 100%
busy, lock out the tasklet while we reconstruct the busy state. There is
no direct spinlock guard for the execlists->port[], so we need to
utilise tasklet_disable() as a synchronous barrier to prevent it, the
only writer to execlists->port[], from running at the same time as the
enable.
Fixes: 4900727d35bb ("drm/i915/pmu: Reconstruct active state on starting busy-stats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115092041.13509-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 99e48bf98dd036090b480a12c39e8b971731247e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-1-tvrtko.ursulin@linux.intel.com
|
|
When a request is preempted, it is unsubmitted from the HW queue and
removed from the active list of breadcrumbs. In the process, this
however triggers the signaler and it may see the clear rbtree with the
old, and still valid, seqno, or it may match the cleared seqno with the
now zero rq->global_seqno. This confuses the signaler into action and
signaling the fence.
Fixes: d6a2289d9d6b ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206094633.30181-1-chris@chris-wilson.co.uk
(cherry picked from commit fd10e2ce9905030d922e179a8047a4d50daffd8e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213090154.17373-1-chris@chris-wilson.co.uk
|
|
We need to halt the controller immediately if we haven't completed
initialization as indicated by the new "connecting" state.
Fixes: ad70062cdb ("nvme-pci: introduce RECONNECTING state to mark initializing procedure")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The controller memory buffer is remapped into a kernel address on each
reset, but the driver was setting the submission queue base address
only on the very first queue creation. The remapped address is likely to
change after a reset, so accessing the old address will hit a kernel bug.
This patch fixes that by setting the queue's CMB base address each time
the queue is created.
Fixes: f63572dff1421 ("nvme: unmap CMB and remove sysfs file in reset path")
Reported-by: Christian Black <christian.d.black@intel.com>
Cc: Jon Derrick <jonathan.derrick@intel.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_update_formats will invoke nvme_ns_remove under namespaces_mutext.
The will cause deadlock because nvme_ns_remove will also require
the namespaces_mutext. Fix it by getting the ns entries which should
be removed under namespaces_mutext and invoke nvme_ns_remove out of
namespaces_mutext.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Some other drivers may be waiting for our extcon to show-up, exiting their
probe methods with -EPROBE_DEFER until we show up.
These drivers will typically get the cable state directly after getting
the extcon, this commit changes the int3496 code to wait for the initial
processing of the id-pin to complete before exiting probe() with 0, which
will cause devices waiting on the defered probe to get reprobed.
This fixes a race where the initial work might still be running while other
drivers were already calling extcon_get_state().
Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI ... driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Since mlxsw_sp_fib_create() and mlxsw_sp_mr_table_create()
use ERR_PTR macro to propagate int err through return of a pointer,
the return value is not NULL in case of failure. So if one
of the calls fails, one of vr->fib4, vr->fib6 or vr->mr4_table
is not NULL and mlxsw_sp_vr_is_used wrongly assumes
that vr is in use which leads to crash like following one:
[ 1293.949291] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c9
[ 1293.952729] IP: mlxsw_sp_mr_table_flush+0x15/0x70 [mlxsw_spectrum]
Fix this by using local variables to hold the pointers and set vr->*
only in case everything went fine.
Fixes: 76610ebbde18 ("mlxsw: spectrum_router: Refactor virtual router handling")
Fixes: a3d9bc506d64 ("mlxsw: spectrum_router: Extend virtual routers with IPv6 support")
Fixes: d42b0965b1d4 ("mlxsw: spectrum_router: Add multicast routes notification handling functionality")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have expected busses to set up a coherent mask to properly use the
common dma mapping code for a long time, and now that I've added a warning
macio turned out to not set one up yet. This sets it to the same value
as the dma_mask, which seems to be what the drivers expect.
Reported-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
drivers/ata/sata_rcar.c: In function 'sata_rcar_init_controller':
drivers/ata/sata_rcar.c:821:8: warning: unused variable 'base' [-Wunused-variable]
Fixes: da77d76b95a0e894 ("sata_rcar: Reset SATA PHY when Salvator-X board resumes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
If the entire device is powered off, we can safely assume that the
engine is also asleep (and idle).
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a091d4ee931b ("drm/i915: Hold a wakeref for probing the ring registers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212093928.6005-1-chris@chris-wilson.co.uk
(cherry picked from commit 74d00d28a15c8452f65de0a9477b52d95639cc63)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Userspace provides a 64b value for the priority, we need to be careful
to preserve the full range before validation to prevent truncation (and
letting an illegal value pass).
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Fixes: ac14fbd460d0 ("drm/i915/scheduler: Support user-defined priorities")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208085151.11480-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 11a18f631959fd1ca10856c836a827683536770c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
drivers/gpu/drm/i915/i915_oa_cnl.c: In function ‘i915_perf_load_test_config_cnl’:
drivers/gpu/drm/i915/i915_oa_cnl.c:99:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation]
v2: strlcpy
Fixes: 95690a02fb5d ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-2-chris@chris-wilson.co.uk
(cherry picked from commit 020580ff8edd50e64ae1bf47e560c61e5e2f29fc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
drivers/gpu/drm/i915/i915_oa_cflgt3.c: In function ‘i915_perf_load_test_config_cflgt3’:
drivers/gpu/drm/i915/i915_oa_cflgt3.c:87:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation]
v2: strlcpy
Fixes: 4407eaa9b0cc ("drm/i915/perf: add support for Coffeelake GT3")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-1-chris@chris-wilson.co.uk
(cherry picked from commit 43df81d324cdd7056ad0ce3df709aff8dce856b7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A user reports a really bad temperature on Ryzen 1950X.
k10temp-pci-00cb
Adapter: PCI adapter
temp1: +4294948.3°C (high = +70.0°C)
This will happen if the temperature reported by the chip is lower than
the offset temperature. This has been seen in the field if "Sense MI Skew"
and/or "Sense MI Offset" BIOS parameters were set to unexpected values.
Let's report a temperature of 0 degrees C in that case.
Fixes: 1b50b776355f ("hwmon: (k10temp) Add support for temperature offsets")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
after probe()"
Redoing the charger type detection to give the usb-role-switch code time
to properly set the role-switch is no good for mainline, since the
usb-role-switch code is not yet in mainline (my bad, sorry).
Also once we've that code there are better ways to fix this which are
not prone to racing as doing a retry after 2 seconds is.
This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Make the axp288_pwr_up_down_info array const char * const, this leads
to the following section size changes:
.text 0x674 -> 0x664
.data 0x148 -> 0x0f0
.rodata 0x0b4 -> 0x114
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In nvme_keep_alive() we pass a request with a pointer to an NVMe command on
the stack into blk_execute_rq_nowait(). However, the block layer doesn't
guarantee that the request is fully queued before blk_execute_rq_nowait()
returns. If not, and the request is queued after nvme_keep_alive() returns,
then we'll end up using stack memory that might have been overwritten to
form the NVMe command we pass to hardware.
Fix this by keeping a special command struct in the nvme_ctrl struct right
next to the delayed work struct used for keep-alives.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Prevent a kernel panic on reboot if ptp_clock is NULL by checking
the ptp pointer before using it.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Fixes: 8c56df372bc1 ("net: add support for Cavium PTP coprocessor")
Cc: Radoslaw Biernacki <rad@semihalf.com>
Cc: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because power of Salvator-X board is cut off in suspend,
it needs to reset SATA PHY state in resume.
Otherwise, SATA partition could not be accessed anymore.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@rvc.renesas.com>
[reinit phy in sata_rcar_resume() function on R-Car Gen3 only]
[factor out SATA module init sequence]
[fixed the prefix for the subject]
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
syzkaller hit a WARN() in ata_bmdma_qc_issue() when writing to /dev/sg0.
This happened because it issued an ATA pass-through command (ATA_16)
where the protocol field indicated that NCQ should be used -- but the
device did not support NCQ.
We could just remove the WARN() from libata-sff.c, but the real problem
seems to be that the SCSI -> ATA translation code passes through NCQ
commands without verifying that the device actually supports NCQ.
Fix this by adding the appropriate check to ata_scsi_pass_thru().
Here's reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):
#include <fcntl.h>
#include <unistd.h>
int main()
{
char buf[53] = { 0 };
buf[36] = 0x85; /* ATA_16 */
buf[37] = (12 << 1); /* FPDMA */
buf[38] = 0x1; /* Has data */
buf[51] = 0xC8; /* ATA_CMD_READ */
write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
}
Fixes: ee7fb331c3ac ("libata: add support for NCQ commands for SG interface")
Reported-by: syzbot+2f69ca28df61bdfc77cd36af2e789850355a221e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0. This
happened because it issued a READ_6 command with no data buffer.
Just remove the WARN(), as it doesn't appear indicate a kernel bug. The
expected behavior is to fail the command, which the code does.
Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):
#include <fcntl.h>
#include <unistd.h>
int main()
{
char buf[42] = { [36] = 0x8 /* READ_6 */ };
write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
}
Fixes: f92a26365a72 ("libata: change ATA_QCFLAG_DMAMAP semantics")
Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v2.6.25+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
syzkaller reported a crash in ata_bmdma_fill_sg() when writing to
/dev/sg1. The immediate cause was that the ATA command's scatterlist
was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a
write to 'qc->ap->bmdma_prd[0xffffffff]'.
Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The
root cause is that when __ata_scsi_queuecmd() is preparing to relay a
SCSI command to an ATAPI device, it doesn't correctly validate the CDB
length before copying it into the 16-byte buffer 'cdb' in 'struct
ata_queued_cmd'. Namely, it validates the fixed CDB length expected
based on the SCSI opcode but not the actual CDB length, which can be
larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is
the next member in ata_queued_cmd, a buffer overflow corrupts it.
Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN).
[Really it seems the length should be required to be <= dev->cdb_len,
but the current behavior seems to have been intentionally introduced by
commit 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands
in 16-byte CDBs") to work around a userspace bug in mplayer. Probably
the workaround is no longer needed (mplayer was fixed in 2007), but
continuing to allow lengths to up 16 appears harmless for now.]
Here's a reproducer that works in QEMU when /dev/sg1 refers to the
CD-ROM drive that qemu-system-x86_64 creates by default:
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
#define SG_NEXT_CMD_LEN 0x2283
int main()
{
char buf[53] = { [36] = 0x7e, [52] = 0x02 };
int fd = open("/dev/sg1", O_RDWR);
ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 });
write(fd, buf, sizeof(buf));
}
The crash was:
BUG: unable to handle kernel paging request at ffff8cb97db37ffc
IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline]
IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727
PGD fb6c067 P4D fb6c067 PUD 0
Oops: 0002 [#1] SMP
CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[...]
Call Trace:
ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421
ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024
__ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline]
ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375
scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727
scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865
__blk_run_queue_uncond block/blk-core.c:412 [inline]
__blk_run_queue+0x3a/0x60 block/blk-core.c:432
blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78
sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806
sg_write+0x1ef/0x340 drivers/scsi/sg.c:677
__vfs_write+0x31/0x160 fs/read_write.c:480
vfs_write+0xa7/0x160 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0x4d/0xc0 fs/read_write.c:581
do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x21/0x86
Fixes: 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs")
Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v2.6.24+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Indent the numbered item with one space like all other items in the same
list.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Exit directly with ENODEV, if the AHCI controller is not available
anymore. Otherwise a delay of 500ms for each port is added to the remove
function while trying to issue a command on the non-existent controller.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The control channel calls registered callbacks when control messages
such as XDomain protocol messages are received. The control channel
handling is done in a worker running on system workqueue which means the
networking driver can't run tear down flow which includes sending
disconnect request and waiting for a reply in the same worker. Otherwise
reply is never received (as the work is already running) and the
operation times out.
To fix this run disconnect ThunderboltIP flow asynchronously once
ThunderboltIP logout message is received.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When suspending to mem or disk the Thunderbolt controller typically goes
down as well tearing down the connection automatically. However, when
suspend to idle is used this does not happen so we need to make sure the
connection is properly disconnected before it can be re-established
during resume.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixs the following comile warnings with ATA_DEBUG enabled,
which detected by Linaro GCC 5.2-2015.11:
drivers/ata/libata-scsi.c: In function 'ata_scsi_dump_cdb':
./include/linux/kern_levels.h:5:18: warning: format '%d' expects
argument of type 'int', but argument 6 has type 'u64 {aka long
long unsigned int}' [-Wformat=]
tj: Patch hand-applied and description trimmed.
Signed-off-by: Dong Bo <dongbo4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- oversize stack frames on mn10300 in sha3-generic
- warning on old compilers in sha3-generic
- API error in sun4i_ss_prng
- potential dead-lock in sun4i_ss_prng
- null-pointer dereference in sha512-mb
- endless loop when DECO acquire fails in caam
- kernel oops when hashing empty message in talitos"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate
crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate
crypto: caam - fix endless loop when DECO acquire fails
crypto: sha3-generic - Use __optimize to support old compilers
compiler-gcc.h: __nostackprotector needs gcc-4.4 and up
compiler-gcc.h: Introduce __optimize function attribute
crypto: sha3-generic - deal with oversize stack frames
crypto: talitos - fix Kernel Oops on hashing an empty file
crypto: sha512-mb - initialize pending lengths correctly
|
|
Currently, if Wake-on-LAN is enabled, the SH-ETH device's module clock
is manually kept running during system suspend, to make sure the device
stays active.
Since commits 91c719f5ec6671f7 ("soc: renesas: rcar-sysc: Keep wakeup
sources active during system suspend") and 744dddcae84441b1 ("clk:
renesas: mstp: Keep wakeup sources active during system suspend"), this
workaround is no longer needed. Hence remove all explicit clock
handling to keep the device active.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if Wake-on-LAN is enabled, the EtherAVB device's module clock
is manually kept running during system suspend, to make sure the device
stays active.
Since commit 91c719f5ec6671f7 ("soc: renesas: rcar-sysc: Keep wakeup
sources active during system suspend") , this workaround is no longer
needed. Hence remove all explicit clock handling to keep the device
active.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When forcing a specific link mode, the PHY driver must clear the
existing speed and duplex bits in BMCR while preserving some other
control bits. This logic was accidentally inverted with the introduction
of phy_modify().
Fixes: fea23fb591cc ("net: phy: convert read-modify-write to phy_modify()")
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit baa8809f6097 (PM / runtime: Optimize the use of device links)
added an invocation of pm_runtime_drop_link() to __device_link_del().
However there are two variants of that function, one for CONFIG_SRCU and
another for !CONFIG_SRCU, and the commit only modified the former.
Fixes: baa8809f6097 (PM / runtime: Optimize the use of device links)
Cc: v4.10+ <stable@vger.kernel.org> # v4.10+
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a device is runtime PM suspended when we enter suspend and has
a dedicated wake IRQ, we can get the following warning:
WARNING: CPU: 0 PID: 108 at kernel/irq/manage.c:526 enable_irq+0x40/0x94
[ 102.087860] Unbalanced enable for IRQ 147
...
(enable_irq) from [<c06117a8>] (dev_pm_arm_wake_irq+0x4c/0x60)
(dev_pm_arm_wake_irq) from [<c0618360>]
(device_wakeup_arm_wake_irqs+0x58/0x9c)
(device_wakeup_arm_wake_irqs) from [<c0615948>]
(dpm_suspend_noirq+0x10/0x48)
(dpm_suspend_noirq) from [<c01ac7ac>]
(suspend_devices_and_enter+0x30c/0xf14)
(suspend_devices_and_enter) from [<c01adf20>]
(enter_state+0xad4/0xbd8)
(enter_state) from [<c01ad3ec>] (pm_suspend+0x38/0x98)
(pm_suspend) from [<c01ab3e8>] (state_store+0x68/0xc8)
This is because the dedicated wake IRQ for the device may have been
already enabled earlier by dev_pm_enable_wake_irq_check(). Fix the
issue by checking for runtime PM suspended status.
This issue can be easily reproduced by setting serial console log level
to zero, letting the serial console idle, and suspend the system from
an ssh terminal. On resume, dmesg will have the warning above.
The reason why I have not run into this issue earlier has been that I
typically run my PM test cases from on a serial console instead over ssh.
Fixes: c84345597558 (PM / wakeirq: Enable dedicated wakeirq for suspend)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If NO_DMA=y:
ERROR: "bad_dma_ops" [drivers/mtd/nand/marvell_nand.ko] undefined!
Add a dependency on HAS_DMA to fix this.
Fixes: 02f26ecf8c772751 ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
With commit 3cf32d180227 ("mtd: nand: vf610: switch to
mtd_ooblayout_ops") the driver started to use the NAND cores
default large page ooblayout. However, shortly after commit
6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
changed the default layout to the old hamming layout, which is
not what vf610_nfc is using. Specify the default large page
layout explicitly.
Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Simply adjust the pin group to _x _y _z style, as to
keep the consistency in DT with previous naming scheme.
Fixes: 83c566806a68 ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC")
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Constify device_get_match_data() as OF and ACPI variants return
constant value.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
