summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-09-14usb: gadget: amd5536udc: fix error handling in udc_pci_probe()Alexey Khoroshilov
If a failure happens early in udc_pci_probe(), error handling code just kfree(dev) and returns. The patch adds proper resource deallocations in udc_pci_probe() itself, since udc_pci_remove() is not suitabe to be called so early in initialization process. By the way, iounmap(dev->regs) is replaced by iounmap(dev->virt_addr) in udc_pci_remove() for clarity. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: phy: fix phy-qcom-8x16-usb buildRandy Dunlap
Fix build errors that happen when USB_QCOM_8X16_PHY=y and EXTCON=m: drivers/built-in.o: In function `phy_8x16_init': phy-qcom-8x16-usb.c:(.text+0x86ef4): undefined reference to `extcon_get_cable_state' drivers/built-in.o: In function `phy_8x16_probe': phy-qcom-8x16-usb.c:(.text+0x870bf): undefined reference to `extcon_get_edev_by_phandle' phy-qcom-8x16-usb.c:(.text+0x87133): undefined reference to `extcon_register_interest' phy-qcom-8x16-usb.c:(.text+0x87151): undefined reference to `extcon_unregister_interest' drivers/built-in.o: In function `phy_8x16_remove': phy-qcom-8x16-usb.c:(.text+0x872ec): undefined reference to `extcon_unregister_interest' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: musb: ensure in peripheral mode when checking sessionBin Liu
The change ensures otg is not in a A- state when checking for VBUS in peripheral mode. musb_start() where VBUS checking is in can be called in many situations. One example is in babble recovery routine, in which otg is transitioning from A-HOST to A-WAIT-BCON, but VBUS discharge takes time, so musb->is_active could be set to 1 due to this improper checking, then it causes musb_bus_suspend() failed which leads to warning log message flooding. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14drm/i915/gen9: WA ST Unit Power Optimization DisableRobert Beckett
WaDisableSTUnitPowerOptimization:skl,bxt Signed-off-by: Robert Beckett <robert.beckett@intel.com> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14usb: dwc3: omap: enable irqs latelyFelipe Balbi
If we enable IRQs before requesting our extcon device, we might fall into a situation where and IRQ fires before we're ready to handle it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: gadget: fix possible regression introduced with ep->claimedRobert Baldyga
This patch fixes possible regression introduced by patch reworking endpoint claiming mechanism. It restores setring ep->driver_data to NULL in usb_ep_autoconfig_reset(), which was removed by patch commit cc476b42a39d. Fixes: cc476b42a39d ("usb: gadget: encapsulate endpoint claiming mechanism") Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14thermal: power_allocator: don't require tzp to be present for the thermal zoneJavi Merino
Thermal zones created using thermal_zone_device_create() may not have tzp. As the governor gets its parameters from there, allocate it while the governor is bound to the thermal zone so that it can operate in it. In this case, tzp is freed when the thermal zone switches to another governor. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: power_allocator: relax the requirement of two passive trip pointsJavi Merino
The power allocator governor currently requires that the thermal zone has at least two passive trip points. If there aren't, the governor refuses to bind to the thermal zone. This commit relaxes that requirement. Now the governor will bind to all thermal zones regardless of how many trip points they have. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: power_allocator: relax the requirement of a sustainable_power in tzpJavi Merino
The power allocator governor currently requires that a sustainable power is passed as part of the thermal zone's thermal zone parameters. If that parameter is not provided, it doesn't register with the thermal zone. While this parameter is strongly recommended for optimal performance, it doesn't need to be mandatory. Relax the requirement and allow the governor to bind to thermal zones that don't provide it by estimating it from the cooling devices' power model. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: Add a function to get the minimum powerJavi Merino
The thermal core already has a function to get the maximum power of a cooling device: power_actor_get_max_power(). Add a function to get the minimum power of a cooling device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14drm/i915: Set stolen reserved to 0 for pre-g4x platformsVille Syrjälä
This stolen reserved stuff was introduced on g4x, so no need to waste stolen on older platforms. Unfortunately configdb is no more so I can't look up the right way to detect this stuff. I do have one hint as to where the register might be on ctg, but I don't have a ctg to test it, and on the elk I have here it doesn't contain sensible looking data. For ilk grits suggegsts it might be in the same place as on snb (the original PCI reg, not the mirror) but I can't be entirely sure about it The register shows a round zero on my ilk. So when there's no really good data for any of these platforms leave the current "assume 1MiB" approach in place. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: Fix warnings while make xmldocs caused by intel_lrc.cMasanari Iida
This patch fix following warnings while "make xmldocs". .//drivers/gpu/drm/i915/intel_lrc.c:780: warning: No description found for parameter 'req' .//drivers/gpu/drm/i915/intel_lrc.c:780: warning: Excess function parameter 'request' description in 'intel_logical_ring_begin' .//drivers/gpu/drm/i915/intel_lrc.c:780: warning: Excess function parameter 'ctx' description in 'intel_logical_ring_begin' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: Split alloc from init for lrcNick Hoath
Extend init/init_hw split to context init. - Move context initialisation in to i915_gem_init_hw - Move one off initialisation for render ring to i915_gem_validate_context - Move default context initialisation to logical_ring_init Rename intel_lr_context_deferred_create to intel_lr_context_deferred_alloc, to reflect reduced functionality & alloc/init split. This patch is intended to split out the allocation of resources & initialisation to allow easier reuse of code for resume/gpu reset. v2: Removed function ptr wrapping of do_switch_context (Daniel Vetter) Left ->init_context int intel_lr_context_deferred_alloc (Daniel Vetter) Remove unnecessary init flag & ring type test. (Daniel Vetter) Improve commit message (Daniel Vetter) v3: On init/reinit, set the hw next sequence number to the sw next sequence number. This is set to 1 at driver load time. This prevents the seqno being reset on reinit (Chris Wilson) v4: Set seqno back to ~0 - 0x1000 at start-of-day, and increment by 0x100 on reset. This makes it obvious which bbs are which after a reset. (David Gordon & John Harrison) Rebase. v5: Rebase. Fixed rebase breakage. Put context pinning in separate function. Removed code churn. (Thomas Daniel) v6: Cleanup up issues introduced in v2 & v5 (Thomas Daniel) Issue: VIZ-4798 Signed-off-by: Nick Hoath <nicholas.hoath@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: John Harrison <john.c.harrison@intel.com> Cc: David Gordon <david.s.gordon@intel.com> Cc: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: don't try to load GuC fw on pre-gen9Jesse Barnes
This avoids some bad register writes and generally feels more correct than unconditionally trying to redirect interrupts and such. References: https://bugs.freedesktop.org/show_bug.cgi?id=91777 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: make CSR firmware messages less verboseJesse Barnes
Use WARN_ONCE in a bunch of places and demote a message that would continually spam us. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915/gen9: Add WaDisableMinuteIaClockGatingNick Hoath
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915/bxt: Add WaSetClckGatingDisableMediaArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915/gen9: Add WaDisableSamplerPowerBypassForSOPingPongArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915/bxt: Use intel_encoder->hpd_pin to check live statusSonika Jindal
Using intel_encoder's hpd_pin to check the live status because of BXT A0/A1 WA for HPD pins and hpd_pin contains the updated pin for the corresponding port. Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14soc: dove: Prepare irq handler for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-09-14soc: dove: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descThomas Gleixner
Search and replace done with coccinelle Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14drm/i915/lrc: Prevent preemption when lite-restore is disabledMichel Thierry
When WaEnableForceRestoreInCtxtDescForVCS is required, it is only safe to send new contexts if the last reported event is "active to idle". Otherwise the same context can fully preempt itself because lite-restore is disabled. Testcase: igt/gem_concurrent_blit Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: WaEnableForceRestoreInCtxtDescForVCS is for video engines onlyMichel Thierry
Also check for correct revision id in each Gen9 platform (SKL until B0 and BXT until A0). Cc: Nick Hoath <nicholas.hoath@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/vmwgfx: Map the fifo as cachedThomas Hellstrom
On the guest kernel side, previously the FIFO has been mapped write- combined. This has worked since VMs up to now has not honored the mapping type and mapped the FIFO cached anyway. Since the FIFO is accessed cached by the CPU on the virtual device side, this leads to inconsistent mappings once the guest starts to honor the mapping types. So ask for cached mappings when we map the FIFO. We do this by using ioremap_cache() instead of ioremap_wc(), and remove the MTRR setup. On the TTM side, MOBs, GMRs and VRAM buffers are already requesting cached mappings for kernel- and user-space. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-09-14drm/vmwgfx: Fix up user_dmabuf refcountingThomas Hellstrom
If user space calls unreference on a user_dmabuf it will typically kill the struct ttm_base_object member which is responsible for the user-space visibility. However the dmabuf part may still be alive and refcounted. In some situations, like for shared guest-backed surface referencing/opening, the driver may try to reference the struct ttm_base_object member again, causing an immediate kernel warning and a later kernel NULL pointer dereference. Fix this by always maintaining a reference on the struct ttm_base_object member, in situations where it might subsequently be referenced. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-09-14drm/i915: skip modeset if compatible for everyone.Maarten Lankhorst
This is done as a separate commit, to make it easier to revert when things break. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: Make updating pipe without modeset atomic.Maarten Lankhorst
Instead of doing a hack during primary plane commit the state is updated during atomic evasion. It handles differences in pipe size and the panel fitter. This is continuing on top of Daniel's work to make faster modesets atomic, and not yet enabled by default. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: - simplify/future-proof if ladder that Jesse spotted - resolve conflict in pipe_config_check and don't spuriously move the code.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: Always try to inherit the initial fb.Maarten Lankhorst
The initial state is read out correctly and the state is atomic, so it's safe to preserve the fb without any hacks if it's suitable. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14USB: option: add ZTE PIDsLiu.Zhao
This is intended to add ZTE device PIDs on kernel. Signed-off-by: Liu.Zhao <lzsos369@163.com> Cc: stable <stable@vger.kernel.org> [johan: sort the new entries ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-14drm/i915: Remove references to crtc->active from intel_fbdev.cMaarten Lankhorst
It should really use the atomic state. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: Set csc coefficients in update_pipe_size.Maarten Lankhorst
This might not have been set during boot, and when we preserve the initial mode this can result in a black screen. Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14pinctrl: samsung: s3c24xx: fix syntax errorLinus Walleij
?SYNTAX ERROR irq_desc_get_irq_chip() does not exist. It should be irq_desc_get_chip(). Tested by compiling s3c2410_defconfig. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()Tony Lindgren
If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: join lines that can be a single line within 80 columnsMasahiro Yamada
There is no reason to break a line shorter than 80 columns. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: digicolor: convert null test to IS_ERR testJulia Lawall
Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update a driver that was introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: qcom: ssbi: convert null test to IS_ERR testJulia Lawall
Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: omap: Fix GPIO numbering for deferred probeTony Lindgren
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering keeps increasing. Only increase the gpio count if gpiochip_add() was successful as otherwise the numbers will increase for each probe attempt. Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: omap: Fix gpiochip_add() handling for deferred probeTony Lindgren
Currently we gpio-omap breaks if gpiochip_add() returns -EPROBE_DEFER: [ 0.570000] gpiochip_add: GPIOs 0..31 (gpio) failed to register [ 0.570000] omap_gpio 48310000.gpio: Could not register gpio chip -517 ... [ 3.670000] omap_gpio 48310000.gpio: Unbalanced pm_runtime_enable! Let's fix the issue by adding the missing pm_runtime_put() on error. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: sx150x: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas
The driver has a I2C device id table that is used to create the module aliases and also "sx150x" isn't a supported I2C id, so it's never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: Propagate errors from chip->get()Bjorn Andersson
It's possible to have gpio chips hanging off unreliable remote buses where the get() operation will fail to acquire a readout of the current gpio state. Propagate these errors to the consumer so that they can act on, retry or ignore these failing reads, instead of treating them as the line being held high. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: rcar: GPIO_RCAR doesn't relate to ARMKuninori Morimoto
8cd1470("gpio: rcar: Add r8a7795 (R-Car H3) support") added GPIO support for r8a7795. r8a7795 based on CONFIG_ARM64. OTOH, GPIO_RCAR driver can be compiled fine on non-ARM. This patch removed ARM dependency for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: mxs: need to check return value of irq_alloc_generic_chipPeng Fan
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxs_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: mxc: need to check return value of irq_alloc_generic_chipPeng Fan
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxc_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> [Manually rebased] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-13thermal: cpu_cooling: free power table on error or when unregisteringJavi Merino
The power table is not being freed on error from cpufreq_cooling register or when unregistering. Free it. Fixes: c36cf0717631 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: cpu_cooling: don't call kcalloc() under rcu_read_lockJavi Merino
build_dyn_power_table() allocates the power table while holding rcu_read_lock. kcalloc using GFP_KERNEL may sleep, so it can't be called in an RCU read-side path. Move the rcu protection to the part of the function that really needs it: the part that handles the dev_pm_opp pointer received from dev_pm_opp_find_freq_ceil(). In the unlikely case that there is an OPP added to the cpu while this function is running, return -EAGAIN. Fixes: c36cf0717631 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: Kconfig fix to avoid menu showing wronglyEduardo Valentin
Move the dependencies to menu, so we avoid showing it wrongly. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to ti-soc driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: qcom_spmi: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to qcom_spmi driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: exynos: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to exynos driver to facilitate maintenance. Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit (git 2.34.1) at 2025-10-02 03:04:22 +0000