| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.6:
- A couple of i.MX8MP device tree changes from Adam Ford to fix clock
configuration regressions caused by 16c984524862 ("arm64: dts: imx8mp:
don't initialize audio clocks from CCM node").
- Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree.
- Fix a mmemory leak with error handling path of imx_dsp_setup_channels()
in imx-dsp driver.
- Fix HDMI node in imx8mm-evk device tree.
- Add missing clock enable functionality for imx8mm_soc_uid() function
in soc-imx8m driver.
- Add missing imx8mm-prt8mm.dtb build target.
* tag 'imx-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
arm64: dts: imx8mm-evk: Fix hdmi@3d node
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
arm64: dts: imx8mp: Fix SDMA2/3 clocks
arm64: dts: freescale: tqma9352: Fix gpio hog
firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()
Link: https://lore.kernel.org/r/20230926123710.GT7231@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit d1cd5b51bc9152dc2b63c5f843590272d6694d50.
It was reported that some I2C3 functions stop working after this
patch, and it is just debug help so let's revert it and investigate.
Link: https://lore.kernel.org/linux-gpio/20230925183049.10a40546@booty/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.
This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.
Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.
timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
--> timbgpio_irq_disable()
--> spin_lock_irqsave(&tgpio->lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Create buffers with cache coherency on the CPU side (write-back) while
disabling snooping on the VPU side. These buffers require an explicit
cache flush after each CPU-side modification.
Configuring pages as write-combined may introduce significant delays,
potentially taking hundreds of milliseconds for 64 MB buffers.
Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the
VPU side. Allocate FW runtime memory buffer (64 MB) as cached with
snooping-disabled.
This fixes random long FW loading times and boot params memory
corruption on warmboot (due to missed wmb).
Fixes: 02d5b0aacd05 ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com
|
|
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.
Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
|
|
Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.
FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.
FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
|
|
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.
Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
|
|
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute
the dmesg.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com
|
|
If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:
[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0
To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.
Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
|
|
Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.
The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.
Note:
- We do not requeue the worker if we cannot take a reference to runtime
pm since intel_guc_busyness_unpark would requeue the worker in the
resume path.
- If the gt was parked longer than time taken for GT timestamp to roll
over, we ignore those rollovers since we don't care about tracking the
exact GT time. We only care about roll overs when the gt is active and
running workloads.
- There is a window of time between gt_park and runtime suspend, where
the worker may run. This is acceptable since the worker will not find
any new data to update busyness.
v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag
v3: (Daniele)
- Reword commit and comments and add details
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit e2f99b79d4c594cdf7ab449e338d4947f5ea8903)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d991b39ce376c492df2f7890fd6a541ffc
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765ef6 ("drm/i915/uc: Reserve upper range of GGTT")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
(cherry picked from commit 0f3fa942d91165c2702577e9274d2ee1c7212afc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter. gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.
Clamp the length of the last entry in the sg list to be the expected
length.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 0b62af28f249 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9256
Link: https://lore.kernel.org/lkml/6287208.lOV4Wx5bFT@natalenko.name/
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919194855.347582-1-willy@infradead.org
(cherry picked from commit 26a8e32e6d77900819c0c730fbfb393692dbbeea)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
regulator_register()"
This reverts commit 5f4b204b6b8153923d5be8002c5f7082985d153f.
Since rdev->dev now has a release() callback, the proper way of freeing
the initialized device can be restored.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/d7f469f3f7b1f0e1d52f9a7ede3f3c5703382090.1695077303.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When fixing a memory leak in commit d3c731564e09 ("regulator: plug
of_node leak in regulator_register()'s error path") it moved the
device_initialize() call earlier, but did not move the `dev->class`
initialization. The bug was spotted and fixed by reverting part of
the commit (in commit 5f4b204b6b81 "regulator: core: fix kobject
release warning and memory leak in regulator_register()") but
introducing a different bug: now early error paths use `kfree(dev)`
instead of `put_device()` for an already initialized `struct device`.
Move the missing assignments to just after `device_initialize()`.
Fixes: d3c731564e09 ("regulator: plug of_node leak in regulator_register()'s error path")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/b5b19cb458c40c9d02f3d5a7bd1ba7d97ba17279.1695077303.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use atomic readl_poll_timeout_atomic, because msdc_reset_hw
may be invoked in IRQ handler in the following context:
msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw()
The following kernel BUG stack trace can be observed on
Genio 1200 EVK after initializing MSDC1 hardware during kernel boot:
[ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002
[ 1.189157] Modules linked in:
[ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1
[ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT)
[ 1.206484] Call trace:
[ 1.206796] dump_backtrace+0x0/0x1ac
[ 1.207266] show_stack+0x24/0x30
[ 1.207692] dump_stack_lvl+0x68/0x84
[ 1.208162] dump_stack+0x1c/0x38
[ 1.208587] __schedule_bug+0x68/0x80
[ 1.209056] __schedule+0x6ec/0x7c0
[ 1.209502] schedule+0x7c/0x110
[ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0
[ 1.210569] schedule_hrtimeout_range+0x20/0x30
[ 1.211148] usleep_range_state+0x84/0xc0
[ 1.211661] msdc_reset_hw+0xc8/0x1b0
[ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0
[ 1.212693] msdc_irq+0x104/0x2d4
[ 1.213121] __handle_irq_event_percpu+0x68/0x280
[ 1.213725] handle_irq_event+0x70/0x15c
[ 1.214230] handle_fasteoi_irq+0xb0/0x1a4
[ 1.214755] handle_domain_irq+0x6c/0x9c
[ 1.215260] gic_handle_irq+0xc4/0x180
[ 1.215741] call_on_irq_stack+0x2c/0x54
[ 1.216245] do_interrupt_handler+0x5c/0x70
[ 1.216782] el1_interrupt+0x30/0x80
[ 1.217242] el1h_64_irq_handler+0x1c/0x2c
[ 1.217769] el1h_64_irq+0x78/0x7c
[ 1.218206] cpuidle_enter_state+0xc8/0x600
[ 1.218744] cpuidle_enter+0x44/0x5c
[ 1.219205] do_idle+0x224/0x2d0
[ 1.219624] cpu_startup_entry+0x30/0x80
[ 1.220129] rest_init+0x108/0x134
[ 1.220568] arch_call_rest_init+0x1c/0x28
[ 1.221094] start_kernel+0x6c0/0x700
[ 1.221564] __primary_switched+0xc0/0xc8
Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling")
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioachino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230922095348.22182-1-pablo.sun@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
For the benefit of CI.
|
|
Userspace has currently no way of checking the internal R1 response error
bits for some commands. This is a problem for some commands, like RPMB for
example. Typically, we may detect that the busy completion has successfully
ended, while in fact the card did not complete the requested operation.
To fix the problem, let's always poll with CMD13 for these commands and
during the polling, let's also aggregate the R1 response bits. Before
completing the ioctl request, let's propagate the R1 response bits too.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230913112921.553019-1-ulf.hansson@linaro.org
|
|
Return an error code if sdhci_sprd_get_best_clk_sample() fails.
Currently, it returns success.
Fixes: d83d251bf3c2 ("mmc: sdhci-sprd: Add SD HS mode online tuning")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wenchao Chen <wenchao.chen@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/a8af0a08-8405-43cc-bd83-85ff25f572ca@moroto.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To improve the r/w performance of GL9763E, the current driver inhibits LPM
negotiation while the device is active.
This prevents a large number of SoCs from suspending, notably x86 systems
which commonly use S0ix as the suspend mechanism - for example, Intel
Alder Lake and Raptor Lake processors.
Failure description:
1. Userspace initiates s2idle suspend (e.g. via writing to
/sys/power/state)
2. This switches the runtime_pm device state to active, which disables
LPM negotiation, then calls the "regular" suspend callback
3. With LPM negotiation disabled, the bus cannot enter low-power state
4. On a large number of SoCs, if the bus not in a low-power state, S0ix
cannot be entered, which in turn prevents the SoC from entering
suspend.
Fix by re-enabling LPM negotiation in the device's suspend callback.
Suggested-by: Stanislaw Kardach <skardach@google.com>
Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E")
Cc: stable@vger.kernel.org
Signed-off-by: Sven van Ashbrook <svenva@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230831160055.v3.1.I7ed1ca09797be2dd76ca914c57d88b32d24dac88@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
tuning only support in 4-bit mode or 8 bit mode, so in 1-bit mode,
need to hold retuning.
Find this issue when use manual tuning method on imx93. When system
resume back, SDIO WIFI try to switch back to 4 bit mode, first will
trigger retuning, and all tuning command failed.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: dfa13ebbe334 ("mmc: host: Add facility to support re-tuning")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230830093922.3095850-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Fix the deadlock by refactoring the MR cache cleanup flow to flush the
workqueue without holding the rb_lock.
This adds a race between cache cleanup and creation of new entries which
we solve by denied creation of new entries after cache cleanup started.
Lockdep:
WARNING: possible circular locking dependency detected
[ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted
[ 2785.339778 ] ------------------------------------------------------
[ 2785.340848 ] devlink/53872 is trying to acquire lock:
[ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900
[ 2785.343403 ]
[ 2785.343403 ] but task is already holding lock:
[ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib]
[ 2785.346273 ]
[ 2785.346273 ] which lock already depends on the new lock.
[ 2785.346273 ]
[ 2785.347720 ]
[ 2785.347720 ] the existing dependency chain (in reverse order) is:
[ 2785.349003 ]
[ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}:
[ 2785.350160 ] __mutex_lock+0x14c/0x15c0
[ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib]
[ 2785.352044 ] process_one_work+0x7c2/0x1310
[ 2785.352879 ] worker_thread+0x59d/0xec0
[ 2785.353636 ] kthread+0x28f/0x330
[ 2785.354370 ] ret_from_fork+0x1f/0x30
[ 2785.355135 ]
[ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}:
[ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0
[ 2785.357349 ] lock_acquire+0x1c1/0x540
[ 2785.358121 ] __flush_work+0xe8/0x900
[ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0
[ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib]
[ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib]
[ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib]
[ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib]
[ 2785.363870 ] auxiliary_bus_remove+0x52/0x70
[ 2785.364715 ] device_release_driver_internal+0x3c1/0x600
[ 2785.365695 ] bus_remove_device+0x2a5/0x560
[ 2785.366525 ] device_del+0x492/0xb80
[ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core]
[ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core]
[ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core]
[ 2785.371292 ] devlink_reload+0x439/0x590
[ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0
[ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290
[ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0
[ 2785.374798 ] netlink_rcv_skb+0x12c/0x360
[ 2785.375612 ] genl_rcv+0x24/0x40
[ 2785.376295 ] netlink_unicast+0x438/0x710
[ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0
[ 2785.377926 ] sock_sendmsg+0xc5/0x190
[ 2785.378668 ] __sys_sendto+0x1bc/0x290
[ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0
[ 2785.380255 ] do_syscall_64+0x3d/0x90
[ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 2785.381967 ]
[ 2785.381967 ] other info that might help us debug this:
[ 2785.381967 ]
[ 2785.383448 ] Possible unsafe locking scenario:
[ 2785.383448 ]
[ 2785.384544 ] CPU0 CPU1
[ 2785.385383 ] ---- ----
[ 2785.386193 ] lock(&dev->cache.rb_lock);
[ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work));
[ 2785.388327 ] lock(&dev->cache.rb_lock);
[ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work));
[ 2785.390414 ]
[ 2785.390414 ] *** DEADLOCK ***
[ 2785.390414 ]
[ 2785.391579 ] 6 locks held by devlink/53872:
[ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40
[ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0
[ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core]
[ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core]
[ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600
[ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib]
Fixes: b95845178328 ("RDMA/mlx5: Change the cache structure to an RB-tree")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
checkpath is complaining about NULL string, change it to 'Unknown'.
Fixes: 37aa5c36aa70 ("IB/mlx5: Add UARs write-combining and non-cached mapping")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Link: https://lore.kernel.org/r/8638e5c14fadbde5fa9961874feae917073af920.1695203958.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The mutex was not unlocked on some of the error flows.
Moved the unlock location to include all the error flow scenarios.
Fixes: e1f4a52ac171 ("RDMA/mlx5: Create an indirect flow table for steering anchor")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Link: https://lore.kernel.org/r/1244a69d783da997c0af0b827c622eb00495492e.1695203958.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
After the change to use dynamic cache structure, new cache entries
can be added and the mkey allocation can no longer assume that all
mkeys created for the cache have access_flags equal to zero.
Example of a flow that exposes the issue:
A user registers MR with RO on a HCA that cannot UMR RO and the mkey is
created outside of the cache. When the user deregisters the MR, a new
cache entry is created to store mkeys with RO.
Later, the user registers 2 MRs with RO. The first MR is reused from the
new cache entry. When we try to get the second mkey from the cache we see
the entry is empty so we go to the MR cache mkey allocation flow which
would have allocated a mkey with no access flags, resulting the user getting
a MR without RO.
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/8a802700b82def3ace3f77cd7a9ad9d734af87e7.1695203958.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
rbd_dev_refresh() has been holding header_rwsem across header and
parent info read-in unnecessarily for ages. With commit 870611e4877e
("rbd: get snapshot context after exclusive lock is ensured to be
held"), the potential for deadlocks became much more real owning to
a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores
not allowing new readers after a writer is registered.
For example, assuming that I/O request 1, I/O request 2 and header
read-in request all target the same OSD:
1. I/O request 1 comes in and gets submitted
2. watch error occurs
3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
releases lock_rwsem
4. after reestablishing the watch, rbd_reregister_watch() calls
rbd_dev_refresh() which takes header_rwsem for write and submits
a header read-in request
5. I/O request 2 comes in: after taking lock_rwsem for read in
__rbd_img_handle_request(), it blocks trying to take header_rwsem
for read in rbd_img_object_requests()
6. another watch error occurs
7. rbd_watch_errcb() blocks trying to take lock_rwsem for write
8. I/O request 1 completion is received by the messenger but can't be
processed because lock_rwsem won't be granted anymore
9. header read-in request completion can't be received, let alone
processed, because the messenger is stranded
Change rbd_dev_refresh() to take header_rwsem only for actually
updating rbd_dev->header. Header and parent info read-in don't need
any locking.
Cc: stable@vger.kernel.org # 0b035401c570: rbd: move rbd_dev_refresh() definition
Cc: stable@vger.kernel.org # 510a7330c82a: rbd: decouple header read-in from updating rbd_dev->header
Cc: stable@vger.kernel.org # c10311776f0a: rbd: decouple parent info read-in from updating rbd_dev
Cc: stable@vger.kernel.org
Fixes: 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Unlike header read-in, parent info read-in is already decoupled in
get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along
with the processing logic.
Separate the initial read-in and update read-in logic into
rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and
have rbd_dev_v2_parent_info() just populate struct parent_image_info
(i.e. what get_parent_info() did). Some existing QoI issues, like
flatten of a standalone clone being disregarded on refresh, remain.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Make rbd_dev_header_info() populate a passed struct rbd_image_header
instead of rbd_dev->header and introduce rbd_dev_update_header() for
updating mutable fields in rbd_dev->header upon refresh. The initial
read-in of both mutable and immutable fields in rbd_dev_image_probe()
passes in rbd_dev->header so no update step is required there.
rbd_init_layout() is now called directly from rbd_dev_image_probe()
instead of individually in format 1 and format 2 implementations.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Move rbd_dev_refresh() definition further down to avoid having to
move struct parent_image_info definition in the next commit. This
spares some forward declarations too.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
acpi_nfit_interleave's field 'line_offset' is switched to flexible array [1],
but sizeof_idt() still calculates the size in the form of 1-element array.
Therefore, fix incorrect calculation in sizeof_idt().
[1] https://lore.kernel.org/lkml/2652195.BddDVKsqQX@kreacher/
Fixes: 2a5ab99847bd ("ACPICA: struct acpi_nfit_interleave: Replace 1-element array with flexible array")
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20230826071654.564372-1-liaoyu15@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
As per the FF-A specification: section "Usage of other memory region
attributes", in a transaction to donate memory or lend memory to a single
borrower, if the receiver is a PE or Proxy endpoint, the owner must not
specify the attributes and the relayer will return INVALID_PARAMETERS
if the attributes are set.
Let us not set the memory region attributes for MEM_LEND.
Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND")
Reported-by: Joao Alves <joao.alves@arm.com>
Reported-by: Olivier Deprez <olivier.deprez@arm.com>
Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The iommu_suspend() syscore suspend callback is invoked with IRQ disabled.
Allocating memory with the GFP_KERNEL flag may re-enable IRQs during
the suspend callback, which can cause intermittent suspend/hibernation
problems with the following kernel traces:
Calling iommu_suspend+0x0/0x1d0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 15 at kernel/time/timekeeping.c:868 ktime_get+0x9b/0xb0
...
CPU: 0 PID: 15 Comm: rcu_preempt Tainted: G U E 6.3-intel #r1
RIP: 0010:ktime_get+0x9b/0xb0
...
Call Trace:
<IRQ>
tick_sched_timer+0x22/0x90
? __pfx_tick_sched_timer+0x10/0x10
__hrtimer_run_queues+0x111/0x2b0
hrtimer_interrupt+0xfa/0x230
__sysvec_apic_timer_interrupt+0x63/0x140
sysvec_apic_timer_interrupt+0x7b/0xa0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1f/0x30
...
------------[ cut here ]------------
Interrupts enabled after iommu_suspend+0x0/0x1d0
WARNING: CPU: 0 PID: 27420 at drivers/base/syscore.c:68 syscore_suspend+0x147/0x270
CPU: 0 PID: 27420 Comm: rtcwake Tainted: G U W E 6.3-intel #r1
RIP: 0010:syscore_suspend+0x147/0x270
...
Call Trace:
<TASK>
hibernation_snapshot+0x25b/0x670
hibernate+0xcd/0x390
state_store+0xcf/0xe0
kobj_attr_store+0x13/0x30
sysfs_kf_write+0x3f/0x50
kernfs_fop_write_iter+0x128/0x200
vfs_write+0x1fd/0x3c0
ksys_write+0x6f/0xf0
__x64_sys_write+0x1d/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Given that only 4 words memory is needed, avoid the memory allocation in
iommu_suspend().
CC: stable@kernel.org
Fixes: 33e07157105e ("iommu/vt-d: Avoid GFP_ATOMIC where it is not needed")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Ooi, Chin Hao <chin.hao.ooi@intel.com>
Link: https://lore.kernel.org/r/20230921093956.234692-1-rui.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230925120417.55977-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The code in find_pinctrl() takes a mutex and traverses a list of pinctrl
structures. Later the caller bumps up reference count on the found
structure. Such pattern is not safe as pinctrl that was found may get
deleted before the caller gets around to increasing the reference count.
Fix this by taking the reference count in find_pinctrl(), while it still
holds the mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZQs1RgTKg6VJqmPs@google.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874jk0qnga.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
acpi_video_bus_add_notify_handler() could free video->input and
set it to NULL on failure, but this failure would be missed in its
caller acpi_video_bus_add(). As a result, when an error happens in
acpi_dev_install_notify_handler(), acpi_video_bus_add() would call
acpi_video_bus_remove_notify_handler(), where a potential NULL pointer
video->input is dereferenced in input_unregister_device().
Fix this by adding a return value check and adjusting the following
error handling code.
Fixes: 6f7016819766 ("ACPI: video: Install Notify() handler directly")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a4fdd9762272 ("iommu: Use flush queue capability") hid the
IOMMU_DOMAIN_DMA_FQ domain type from domain allocation. A check was
introduced in iommu_dma_init_domain() to fall back if not supported, but
this check runs too late: by that point, devices have been attached to
the IOMMU, and apple-dart's attach_dev() callback does not expect
IOMMU_DOMAIN_DMA_FQ domains.
Change the logic so the IOMMU_DOMAIN_DMA codepath is the default,
instead of explicitly enumerating all types.
Fixes an apple-dart regression in v6.5.
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: a4fdd9762272 ("iommu: Use flush queue capability")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230922-iommu-type-regression-v2-1-689b2ba9b673@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 6.6 -rc
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
|
|
In mt8192/mt8186, there is only one MM IOMMU that supports 16GB iova
space, which is shared by display, vcodec and camera. These two SoC use
one pgtable and have not the flag SHARE_PGTABLE, we should also keep
share pgtable for this case.
In mtk_iommu_domain_finalise, MM IOMMU always share pgtable, thus remove
the flag SHARE_PGTABLE checking. Infra IOMMU always uses independent
pgtable.
Fixes: cf69ef46dbd9 ("iommu/mediatek: Fix two IOMMU share pagetable issue")
Reported-by: Laura Nao <laura.nao@collabora.com>
Closes: https://lore.kernel.org/linux-iommu/20230818154156.314742-1-laura.nao@collabora.com/
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Laura Nao <laura.nao@collabora.com>
Link: https://lore.kernel.org/r/20230819081443.8333-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
commit 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
some readers no longer force #CLKREQ to low
when the system need to enter ASPM.
But some platform maybe not implement complete ASPM?
it causes some platforms can not boot
Like in the past only the platform support L1ss we release the #CLKREQ.
Move the judgment (L1ss) to probe,
we think read config space one time when the driver start is enough
Fixes: 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
Cc: stable <stable@kernel.org>
Reported-by: Paul Grandperrin <paul.grandperrin@gmail.com>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Tested-By: Jade Lovelace <lists@jade.fyi>
Link: https://lore.kernel.org/r/37b1afb997f14946a8784c73d1f9a4f5@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.
Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b2030942859 ("libata: Add support for SCT Write Same")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Enable VPU on Arrow Lake CPUs.
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922132206.812817-1-stanislaw.gruszka@linux.intel.com
|
|
I2C_CLASS_DEPRECATED is a flag and not an actual class.
There's nothing speaking against both, parent and child, having
I2C_CLASS_DEPRECATED set. Therefore exclude it from the check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of regression fixes, bug fixes, and some small cleanups
to the Compute Express Link code.
The regressions arrived in the v6.5 dev cycle and missed the v6.6
merge window due to my personal absences this cycle. The most
important fixes are for scenarios where the CXL subsystem fails to
parse valid region configurations established by platform firmware.
This is important because agreement between OS and BIOS on the CXL
configuration is fundamental to implementing "OS native" error
handling, i.e. address translation and component failure
identification.
Other important fixes are a driver load error when the BIOS lets the
Linux PCI core handle AER events, but not CXL memory errors.
The other fixex might have end user impact, but for now are only known
to trigger in our test/emulation environment.
Summary:
- Fix multiple scenarios where platform firmware defined regions fail
to be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS
native AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security"
commands are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups"
* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
cxl/port: Fix cxl_test register enumeration regression
cxl/region: Refactor granularity select in cxl_port_setup_targets()
cxl/region: Match auto-discovered region decoders by HPA range
cxl/mbox: Fix CEL logic for poison and security commands
cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
PCI/AER: Export pcie_aer_is_native()
cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
|
|
Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.
This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The logic to clear the TINT interrupt source in rzg2l_irqc_irq_disable()
is wrong as the mask is correct only for LSB on the TSSR register.
This issue is found when testing with two TINT interrupt sources. So fix
the logic for all TINTs by using the macro TSSEL_SHIFT() to multiply
tssr_offset with 8.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230918122411.237635-2-biju.das.jz@bp.renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an invalid usage of __free(kfree) leading to kfreeing an
ERR_PTR()
- fix an irq domain leak in gpio-tb10x
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix an invalid __free() usage
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
MAINTAINERS: gpio-regmap: make myself a maintainer of it
|
|
In order to be sure that 'buff' is never truncated, its size should be
12, not 11.
When building with W=1, this fixes the following warnings:
drivers/infiniband/hw/mlx4/sysfs.c: In function ‘add_port_entries’:
drivers/infiniband/hw/mlx4/sysfs.c:268:34: error: ‘sprintf’ may write a terminating nul past the end of the destination [-Werror=format-overflow=]
268 | sprintf(buff, "%d", i);
| ^
drivers/infiniband/hw/mlx4/sysfs.c:268:17: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 11
268 | sprintf(buff, "%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/sysfs.c:286:34: error: ‘sprintf’ may write a terminating nul past the end of the destination [-Werror=format-overflow=]
286 | sprintf(buff, "%d", i);
| ^
drivers/infiniband/hw/mlx4/sysfs.c:286:17: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 11
286 | sprintf(buff, "%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0bb1443eb47308bc9be30232cc23004c4d4cf43e.1695448530.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior, everywhere else this is the same as ioremap() anyway.
Change the only driver that still references ioremap_uc() to only do so
on x86-32/ia64 in order to allow removing that interface at some
point in the future for the other architectures.
On some architectures, ioremap_uc() just returns NULL, changing
the driver to call ioremap() means that they now have a chance
of working correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct mmphw_ctrl.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of I2C driver fixes. Mostly fixing resource leaks or sanity
checks"
* tag 'i2c-for-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Correct return value check for xiic_reinit()
i2c: mux: gpio: Add missing fwnode_handle_put()
i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
i2c: i801: unregister tco_pdev in i801_probe() error path
|
