summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-12net: usb: lan78xx: Fix suspend/resume PHY register access errorCristian Birsan
Lan78xx driver accesses the PHY registers through MDIO bus over USB connection. When performing a suspend/resume, the PHY registers can be accessed before the USB connection is resumed. This will generate an error and will prevent the device to resume correctly. This patch adds the dependency between the MDIO bus and USB device to allow correct handling of suspend/resume. Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12cpuidle: Drop unnecessary type cast in cpuidle_poll_time()Rafael J. Wysocki
The data type of the target_residency_ns field in struct cpuidle_state is u64, so it does not need to be cast into u64. Get rid of the unnecessary type cast. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-12bus: ti-sysc: Fix missing reset delay handlingTony Lindgren
We have dts property for "ti,sysc-delay-us", and we're using it, but the wait after OCP softreset only happens if devices are probed in legacy mode. Let's add a delay after writing the OCP softreset when specified. Fixes: e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits") Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12pinctrl: aspeed-g6: Fix LPC/eSPI mux configurationAndrew Jeffery
Early revisions of the AST2600 datasheet are conflicted about the state of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED determined that the reference pinmux configuration tables were in error and the SCU documentation contained the correct configuration. Update the driver to reflect the state described in the SCU documentation. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-12drm/amdgpu: avoid using invalidate semaphore for picassochangzhu
It may cause timeout waiting for sem acquire in VM flush when using invalidate semaphore for picasso. So it needs to avoid using invalidate semaphore for piasso. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12Revert "drm/amdgpu: dont schedule jobs while in reset"Alex Deucher
This reverts commit f2efc6e60089c99c342a6b7da47f1037e06c4296. This was fixed properly for 5.5, but came back via 5.4 merge into drm-next, so revert it again. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-12devtmpfs: use do_mount() instead of ksys_mount()Dominik Brodowski
In devtmpfs, do_mount() can be called directly instead of complex wrapping by ksys_mount(): - the first and third arguments are const strings in the kernel, and do not need to be copied over from userspace; - the fifth argument is NULL, and therefore no page needs to be copied over from userspace; - the second and fourth argument are passed through anyway. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12serial: sprd: Add clearing break interrupt operationYonghan Ye
A break interrupt will be generated if the RX line was pulled low, which means some abnomal behaviors occurred of the UART. In this case, we still need to clear this break interrupt status, otherwise it will cause irq storm to crash the whole system. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Yonghan Ye <yonghan.ye@unisoc.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/925e51b73099c90158e080b8f5bed9b3b38c4548.1575460601.git.baolin.wang7@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12tty: serial: msm_serial: Fix lockup for sysrq and oopsLeo Yan
As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug") has mentioned the uart driver might cause recursive locking between normal printing and the kernel debugging facilities (e.g. sysrq and oops). In the commit it gave out suggestion for fixing recursive locking issue: "The solution is to avoid locking in the sysrq case and trylock in the oops_in_progress case." This patch follows the suggestion (also used the exactly same code with other serial drivers, e.g. amba-pl011.c) to fix the recursive locking issue, this can avoid stuck caused by deadlock and print out log for sysrq and oops. Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12usb: dwc3: pci: add ID for the Intel Comet Lake -H variantHeikki Krogerus
The original ID that was added for Comet Lake PCH was actually for the -LP (low power) variant even though the constant for it said CMLH. Changing that while at it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191212093713.60614-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: msm8974: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-5-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: qcs404: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.4 Link: https://lore.kernel.org/r/20191212075332.16202-4-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: sdm845: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20191212075332.16202-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12Merge branch 'linux-5.5' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Bunch of random nouveau fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv56Am90okV334eXgxDuK228sb9UJxMiOYjNAMShvvv4cg@mail.gmail.com
2019-12-12Merge tag 'drm-misc-fixes-2019-12-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Expand dma-buf MAINTAINER scope - Fix mode matching for drivers not using picture_aspect_ratio Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191211212107.GA257983@art_vandelay
2019-12-11drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher
amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11md: make sure desc_nr less than MD_SB_DISKSYufen Yu
For super_90_load, we need to make sure 'desc_nr' less than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'. Fixes: 228fc7d76db6 ("md: avoid invalid memory access for array sb->dev_roles") Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11md: raid1: check rdev before reference in raid1_sync_request funcZhiqiang Liu
In raid1_sync_request func, rdev should be checked before reference. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11raid5: need to set STRIPE_HANDLE for batch headGuoqing Jiang
With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list"), we don't want to set STRIPE_HANDLE flag for sh which is already in batch list. However, the stripe which is the head of batch list should set this flag, otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head), it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved. Thanks for Xiao's effort to verify the change. Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by: Xiao Ni <xni@redhat.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11Merge tag 'reset-fixes-for-v5.5-2' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson
into arm/fixes Reset controller fixes for v5.5, part 2 Fix the example in the brcmstb-reset device tree bindings, remove a bogus resource alignment check from the reset-brcmstb driver, fix the documented return value type for the reset_control_array_get functions, and fix a devres memory leak when requesting optional, not present reset controls. * tag 'reset-fixes-for-v5.5-2' of git://git.pengutronix.de/git/pza/linux: reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example Link: https://lore.kernel.org/r/bb59b9f83892aa3c876f5da87890b0496f2dc755.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11spi: spi-ti-qspi: Fix a bug when accessing non default CSVignesh Raghavendra
When switching ChipSelect from default CS0 to any other CS, driver fails to update the bits in system control module register that control which CS is mapped for MMIO access. This causes reads to fail when driver tries to access QSPI flash on CS1/2/3. Fix this by updating appropriate bits whenever active CS changes. Reported-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-11regulator: max77650: add of_match tableBartosz Golaszewski
We need the of_match table if we want to use the compatible string in the pmic's child node and get the regulator driver loaded automatically. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20191210100725.11005-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-11xhci: make sure interrupts are restored to correct stateMathias Nyman
spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.Mathias Nyman
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by: Eli Billauer <eli.billauer@gmail.com> Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Eli Billauer <eli.billauer@gmail.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng
I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11usb: xhci: only set D3hot for pci deviceHenry Lin
Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman
A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11Merge tag 'fixes-for-v5.5-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.5-rc2 Only four patches here this time around. Three of them are on dwc3 fixing some small bugs related to our 'started' flag. None are major fixes but they're important nevertheless. * tag 'fixes-for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: fix wrong endpoint desc usb: dwc3: ep0: Clear started flag on completion usb: dwc3: gadget: Clear started flag for non-IOC usb: dwc3: gadget: Fix logical condition
2019-12-11drm/i915: Serialise with remote retirementChris Wilson
Since retirement may be running in a worker on another CPU, it may be skipped in the local intel_gt_wait_for_idle(). To ensure the state is consistent for our sanity checks upon load, serialise with the remote retirer by waiting on the timeline->mutex. Outside of this use case, e.g. on suspend or module unload, we expect the slack to be picked up by intel_gt_pm_wait_for_idle() and so prefer to put the special case serialisation with retirement in its single user, for now at least. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-2-chris@chris-wilson.co.uk (cherry picked from commit 2d0fb251360ab7eccbffd99f6933a2a4de678d52) Fixes: 093b92287363 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree") Closes: https://gitlab.freedesktop.org/drm/intel/issues/754 Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-11HID: Fix slab-out-of-bounds read in hid_field_extractAlan Stern
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes. The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer. This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway. Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-11virtio_balloon: divide/multiply instead of shiftsMichael S. Tsirkin
We managed to get confused about the shift direction at least once. Let's switch to division/multiplcation instead. Add a number of pages macro for this purpose. We still keep the order macro around too since this is what alloc/free pages want. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2019-12-11virtio_balloon: name cleanupsMichael S. Tsirkin
free_page_order is a confusing name. It's not a page order actually, it's the order of the block of memory we are hinting. Rename to hint_block_order. Also, rename SIZE to BYTES to make it clear it's the block size in bytes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2019-12-11virtio-balloon: fix managed page counts when migrating pages between zonesDavid Hildenbrand
In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. One way to reproduce: 1. Start a QEMU guest with 4GB, no NUMA 2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL 3. Inflate the balloon to 1GB 4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it) 5. Observe /proc/zoneinfo Node 0, zone Normal pages free 16810 min 24848885473806 low 18471592959183339 high 36918337032892872 spanned 262144 present 262144 managed 18446744073709533486 6. Do anything that requires some memory (e.g., inflate the balloon some more). The OOM goes crazy and the system crashes [ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00 [ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 [ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75 [ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4 [ 238.341121] Call Trace: [ 238.341337] dump_stack+0x8f/0xd0 [ 238.341630] dump_header+0x61/0x5ea [ 238.341942] oom_kill_process.cold+0xb/0x10 [ 238.342299] out_of_memory+0x24d/0x5a0 [ 238.342625] __alloc_pages_slowpath+0xd12/0x1020 [ 238.343024] __alloc_pages_nodemask+0x391/0x410 [ 238.343407] pagecache_get_page+0xc3/0x3a0 [ 238.343757] filemap_fault+0x804/0xc30 [ 238.344083] ? ext4_filemap_fault+0x28/0x42 [ 238.344444] ext4_filemap_fault+0x30/0x42 [ 238.344789] __do_fault+0x37/0x1a0 [ 238.345087] __handle_mm_fault+0x104d/0x1ab0 [ 238.345450] handle_mm_fault+0x169/0x360 [ 238.345790] do_user_addr_fault+0x20d/0x490 [ 238.346154] do_page_fault+0x31/0x210 [ 238.346468] async_page_fault+0x43/0x50 [ 238.346797] RIP: 0033:0x7f47eba4197e [ 238.347110] Code: Bad RIP value. [ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293 [ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e [ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004 [ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033 [ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001 [ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0 [ 238.350878] Mem-Info: [ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0 [ 238.351085] active_file:12 inactive_file:7 isolated_file:0 [ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0 [ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170 [ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0 [ 238.351085] free:720717 free_pcp:2 free_cma:0 [ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss [ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB [ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884 [ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B [ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865 [ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB [ 238.364765] lowmem_reserve[]: 0 0 0 0 0 [ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B [ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B [ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B [ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 238.369915] 130 total pagecache pages [ 238.370241] 0 pages in swap cache [ 238.370533] Swap cache stats: add 0, delete 0, find 0/0 [ 238.370981] Free swap = 0kB [ 238.371239] Total swap = 0kB [ 238.371488] 1048445 pages RAM [ 238.371756] 0 pages HighMem/MovableOnly [ 238.372090] 306992 pages reserved [ 238.372376] 0 pages cma reserved [ 238.372661] 0 pages hwpoisoned In another instance (older kernel), I was able to observe this (negative page count :/): [ 180.896971] Offlined Pages 32768 [ 182.667462] Offlined Pages 32768 [ 184.408117] Offlined Pages 32768 [ 186.026321] Offlined Pages 32768 [ 187.684861] Offlined Pages 32768 [ 189.227013] Offlined Pages 32768 [ 190.830303] Offlined Pages 32768 [ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009 In another instance (older kernel), I was no longer able to start any process: [root@vm ~]# [ 214.348068] Offlined Pages 32768 [ 215.973009] Offlined Pages 32768 cat /proc/meminfo -bash: fork: Cannot allocate memory [root@vm ~]# cat /proc/meminfo -bash: fork: Cannot allocate memory Fix it by properly adjusting the managed page count when migrating if the zone changed. The managed page count of the zones now looks after unplug of the DIMM (and after deflating the balloon) just like before inflating the balloon (and plugging+onlining the DIMM). We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Please note that fixing up the managed page count is only necessary when we adjusted the managed page count when inflating - only if we don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the managed page count is not touched when inflating/deflating. Reported-by: Yumei Huang <yuhuang@redhat.com> Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages") Cc: <stable@vger.kernel.org> # v3.11+ Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-11rtc: mt6397: fix alarm register overwriteRan Bi
Alarm registers high byte was reserved for other functions. This add mask in alarm registers operation functions. This also fix error condition in interrupt handler. Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver") Signed-off-by: Ran Bi <ran.bi@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Link: https://lore.kernel.org/r/1576057435-3561-6-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-11dmaengine: dma-jz4780: Also break descriptor chains on JZ4725BPaul Cercueil
It turns out that the JZ4725B displays the same buggy behaviour as the JZ4740 that was described in commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740"). Work around it by using the same workaround previously used for the JZ4740. Fixes commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740") Cc: <stable@vger.kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191210165545.59690-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-11gpio: pca953x: Switch to bitops in IRQ callbacksAndy Shevchenko
Since we have driver converted to use bitmap API we must use traditional bit operations (set_bit(), clear_bit(), etc.) against it. Currently IRQ callbacks are missed in the conversion and thus broken. Let's fix it right here right now. Fixes: 35d13d94893f ("gpio: pca953x: convert to use bitmap API") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpiolib: fix up emulated open drain outputsRussell King
gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpio: xgs-iproc: remove __exit annotation for iproc_gpio_removeArnd Bergmann
When built into the kernel, the driver causes a link problem: `iproc_gpio_remove' referenced in section `.data' of drivers/gpio/gpio-xgs-iproc.o: defined in discarded section `.exit.text' of drivers/gpio/gpio-xgs-iproc.o Remove the incorrect annotation. Fixes: 6a41b6c5fc20 ("gpio: Add xgs-iproc driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpio: aspeed: avoid return type warningArnd Bergmann
gcc has a hard time tracking whether BUG_ON(1) ends execution or not: drivers/gpio/gpio-aspeed-sgpio.c: In function 'bank_reg': drivers/gpio/gpio-aspeed-sgpio.c:112:1: error: control reaches end of non-void function [-Werror=return-type] Use the simpler BUG() that gcc knows cannot continue. Fixes: f8b410e3695a ("gpio: aspeed-sgpio: Rename and add Kconfig/Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpio: mockup: Fix usage of new GPIO_LINE_DIRECTIONKent Gibson
Restore the external behavior of gpio-mockup to what it was prior to the change to using GPIO_LINE_DIRECTION. Fixes: e42615ec233b ("gpio: Use new GPIO_LINE_DIRECTION") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11drm/i915/gvt: use vgpu lock for active state settingZhenyu Wang
Need to align with deactivate, should only use vgpu's lock for active state setting instead of gvt lock. Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") Cc: Colin Xu <colin.xu@intel.com> Reviewed-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191202070109.73924-2-zhenyuw@linux.intel.com
2019-12-11USB: Fix incorrect DMA allocations for local memory pool driversFredrik Noring
Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") where local memory USB drivers erroneously allocate DMA memory instead of pool memory, causing OHCI Unrecoverable Error, disabled HC died; cleaning up The order between hcd_uses_dma() and hcd->localmem_pool is now arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the test for hcd->localmem_pool placed first. As an alternative, one might consider adjusting hcd_uses_dma() with static inline bool hcd_uses_dma(struct usb_hcd *hcd) { - return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA); + return IS_ENABLED(CONFIG_HAS_DMA) && + (hcd->driver->flags & HCD_DMA) && + (hcd->localmem_pool == NULL); } One can also consider unsetting HCD_DMA for local memory pool drivers. Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Link: https://lore.kernel.org/r/20191210172905.GA52526@sx9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11clk: imx: pll14xx: fix clk_pll14xx_wait_lockPeng Fan
The usage of readl_poll_timeout is wrong, the 3rd parameter(cond) should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US", It is not check whether the pll locked, LOCK_STATUS reflects the mask, not LOCK_TIMEOUT_US. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Cc: <stable@vger.kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-10net: ena: fix napi handler misbehavior when the napi budget is zeroNetanel Belgazal
In netpoll the napi handler could be called with budget equal to zero. Current ENA napi handler doesn't take that into consideration. The napi handler handles Rx packets in a do-while loop. Currently, the budget check happens only after decrementing the budget, therefore the napi handler, in rare cases, could run over MAX_INT packets. In addition to that, this moves all budget related variables to int calculation and stop mixing u32 to avoid ambiguity Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 21:53:07 +0000