summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-10-18drm: mediatek: mtk_dsi: Fix NO_EOT_PACKET settings/handlingAngeloGioacchino Del Regno
Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning, both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the later calculation for horizontal sync-active (HSA), back (HBP) and front (HFP) porches got incorrect due to the logic being inverted. This means that a number of settings were wrong because....: - DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be set in order to disable the End of Transmission packet; - Horizontal Sync and Back/Front porches: The delta used to calculate all of HSA, HBP and HFP should account for the additional EOT packet. Before this change... - Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled; - For HSA/HBP/HFP delta... all three were wrong, as words were added when EOT disabled, instead of when EOT packet enabled! Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the MediaTek DSI driver to fix the aforementioned issues. Fixes: 8b2b99fd7931 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp") Fixes: c87d1c4b5b9a ("drm/mediatek: dsi: Use symbolized register definition") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Tested-by: Michael Walle <mwalle@kernel.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20230523104234.7849-1-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-10-18ACPI: bus: Move acpi_arm_init() to the place of after acpi_ghes_init()Hanjun Guo
acpi_agdi_init() in acpi_arm_init() will register a SDEI event, so it needs the SDEI subsystem to be initialized (which is done in acpi_ghes_init()) before the AGDI driver probing. In commit fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()"), the acpi_agdi_init() was called before acpi_ghes_init() and it causes following failure: | [ 0.515864] sdei: Failed to create event 1073741825: -5 | [ 0.515866] agdi agdi.0: Failed to register for SDEI event 1073741825 | [ 0.515867] agdi: probe of agdi.0 failed with error -5 | ... | [ 0.516022] sdei: SDEIv1.0 (0x0) detected in firmware. Fix it by moving acpi_arm_init() to the place of after acpi_ghes_init(). Fixes: fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()") Reported-by: D Scott Phillips <scott@os.amperecomputing.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: D Scott Phillips <scott@os.amperecomputing.com> Cc: 6.5+ <stable@vger.kernel.org> # 6.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-18usb: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-12-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18legacy: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-11-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18function: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-10-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18tty: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-9-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18x86: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-8-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18misc: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-7-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18ibmasm: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-6-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18qib: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-5-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18char: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-4-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18android: convert to new timestamp accessorsJeff Layton
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-3-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-18ACPI: irq: Fix incorrect return value in acpi_register_gsi()Sunil V L
acpi_register_gsi() should return a negative value in case of failure. Currently, it returns the return value from irq_create_fwspec_mapping(). However, irq_create_fwspec_mapping() returns 0 for failure. Fix the issue by returning -EINVAL if irq_create_fwspec_mapping() returns zero. Fixes: d44fa3d46079 ("ACPI: Add support for ResourceSource/IRQ domain mapping") Cc: 4.11+ <stable@vger.kernel.org> # 4.11+ Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> [ rjw: Rename a new local variable ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-18drm/i915: Prevent potential null-ptr-deref in engine_init_commonNirmoy Das
If measure_breadcrumb_dw() returns an error and bce isn't created, this commit ensures that intel_engine_destroy_pinned_context() is not called with a NULL bce. v2: Fix the subject s/UAF/null-ptr-deref(Jani) Fixes: b35274993680 ("drm/i915: Create a kernel context for GGTT updates") Cc: Oak Zeng <oak.zeng@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231011122547.7085-1-nirmoy.das@intel.com
2023-10-18Revert "net: wwan: iosm: enable runtime pm support for 7560"Bagas Sanjaya
Runtime power management support breaks Intel LTE modem where dmesg dump showes timeout errors: ``` [ 72.027442] iosm 0000:01:00.0: msg timeout [ 72.531638] iosm 0000:01:00.0: msg timeout [ 73.035414] iosm 0000:01:00.0: msg timeout [ 73.540359] iosm 0000:01:00.0: msg timeout ``` Furthermore, when shutting down with `poweroff` and modem attached, the system rebooted instead of powering down as expected. The modem works again only after power cycling. Revert runtime power management support for IOSM driver as introduced by commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for 7560"). Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560") Reported-by: Martin <mwolf@adiumentum.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996 Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/ Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18x86/boot: efistub: Assign global boot_params variableArd Biesheuvel
Now that the x86 EFI stub calls into some APIs exposed by the decompressor (e.g., kaslr_get_random_long()), it is necessary to ensure that the global boot_params variable is set correctly before doing so. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org
2023-10-18clocksource/drivers/arm_arch_timer: limit XGene-1 workaroundAndre Przywara
The AppliedMicro XGene-1 CPU has an erratum where the timer condition would only consider TVAL, not CVAL. We currently apply a workaround when seeing the PartNum field of MIDR_EL1 being 0x000, under the assumption that this would match only the XGene-1 CPU model. However even the Ampere eMAG (aka XGene-3) uses that same part number, and only differs in the "Variant" and "Revision" fields: XGene-1's MIDR is 0x500f0000, our eMAG reports 0x503f0002. Experiments show the latter doesn't show the faulty behaviour. Increase the specificity of the check to only consider partnum 0x000 and variant 0x00, to exclude the Ampere eMAG. Fixes: 012f18850452 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations") Reported-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231016153127.116101-1-andre.przywara@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-10-18platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c eventsHans de Goede
Newer Asus laptops send the following new WMI event codes when some of the F1 - F12 "media" hotkeys are pressed: 0x2a Screen Capture 0x2b PrintScreen 0x2c CapsLock Map 0x2a to KEY_SELECTIVE_SCREENSHOT mirroring how similar hotkeys are mapped on other laptops. PrintScreem and CapsLock are also reported as normal PS/2 keyboard events, map these event codes to KE_IGNORE to avoid "Unknown key code 0x%x\n" log messages. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231017090725.38163-4-hdegoede@redhat.com
2023-10-18platform/x86: asus-wmi: Only map brightness codes when using asus-wmi ↵Hans de Goede
backlight control Older Asus laptops change the backlight level themselves and then send WMI events with different codes for different backlight levels. The asus-wmi.c code maps the entire range of codes reported on brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code: define NOTIFY_BRNUP_MIN 0x11 define NOTIFY_BRNUP_MAX 0x1f define NOTIFY_BRNDOWN_MIN 0x20 define NOTIFY_BRNDOWN_MAX 0x2e if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) code = ASUS_WMI_BRN_UP; else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) code = ASUS_WMI_BRN_DOWN; This mapping is causing issues on new laptop models which actually send 0x2b events for printscreen presses and 0x2c events for capslock presses, which get translated into spurious brightness-down presses. This mapping is really only necessary when asus-wmi has registered a backlight-device for backlight control. In this case the mapping was used to decide to filter out the keypresss since in this case the firmware has already modified the brightness itself and instead of reporting a keypress asus-wmi will just report the new brightness value to userspace. OTOH when the firmware does not adjust the brightness itself then it seems to always report 0x2e for brightness-down presses and 0x2f for brightness up presses independent of the actual brightness level. So in this case the mapping of the code is not necessary and this translation actually leads to spurious brightness-down presses being send to userspace when pressing printscreen or capslock. Modify asus_wmi_handle_event_code() to only do the mapping when using asus-wmi backlight control to fix the spurious brightness-down presses. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com
2023-10-18platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2eHans de Goede
Older Asus laptops change the backlight level themselves and then send WMI events with different codes for different backlight levels. The asus-wmi.c code maps the entire range of codes reported on brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code: define NOTIFY_BRNUP_MIN 0x11 define NOTIFY_BRNUP_MAX 0x1f define NOTIFY_BRNDOWN_MIN 0x20 define NOTIFY_BRNDOWN_MAX 0x2e if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) code = ASUS_WMI_BRN_UP; else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) code = ASUS_WMI_BRN_DOWN; Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX aka 0x20 - 0x2e events were mapped to 0x20. This mapping is causing issues on new laptop models which actually send 0x2b events for printscreen presses and 0x2c events for capslock presses, which get translated into spurious brightness-down presses. The plan is disable the 0x11-0x2e special mapping on laptops where asus-wmi does not register a backlight-device to avoid the spurious brightness-down keypresses. New laptops always send 0x2e for brightness-down presses, change the special internal ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in preparation for fixing the spurious brightness-down presses. This change does not have any functional impact since all of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only then checked against the keymap code and the new 0x2e value is still in the 0x20 - 0x2e range. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com
2023-10-18PM / devfreq: rockchip-dfi: introduce channel maskSascha Hauer
Different Rockchip SoC variants have a different number of channels. Introduce a channel mask to make the number of channels configurable from SoC initialization code. Link: https://lore.kernel.org/all/20231018061714.3553817-8-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-18PM / devfreq: rockchip-dfi: Use free running counterSascha Hauer
The DDR_MON counters are free running counters. These are resetted to 0 when starting them over like currently done when reading the current counter values. Resetting the counters becomes a problem with perf support we want to add later, because perf needs counters that are not modified elsewhere. This patch removes resetting the counters and keeps them running instead. That means we no longer use the absolute counter values but instead compare them with the counter values we read last time. Not stopping the counters also has the impact that they are running while we are reading them. We cannot read multiple timers atomically, so the values do not exactly fit together. The effect should be negligible though as the time between two measurements is some orders of magnitude bigger than the time we need to read multiple registers. Link: https://lore.kernel.org/all/20231018061714.3553817-7-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-10-18gpio: vf610: set value before the direction to avoid a glitchHaibo Chen
We found a glitch when configuring the pad as output high. To avoid this glitch, move the data value setting before direction config in the function vf610_gpio_direction_output(). Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> [Bartosz: tweak the commit message] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-10-18gpio: vf610: mask the gpio irq in system suspend and support wakeupHaibo Chen
Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on suspend, if lack this flag, current irq arctitecture will not mask the irq, and these unmasked gpio irq will wrongly wakeup the system even they are not config as wakeup source. Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio irq which is configed as wakeup source can work as expect. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-10-18ice: Refactor finding advertised link speedPawel Chmielewski
Refactor ice_get_link_ksettings to using forced speed to link modes mapping. Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18qede: Refactor qede_forced_speed_maps_init()Paul Greenwalt
Refactor qede_forced_speed_maps_init() to use commen implementation ethtool_forced_speed_maps_init(). The qede driver was compile tested only. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18wifi: ath11k: rename the sc naming convention to abKarthikeyan Periyasamy
In PCI, thermal and HAL interface layer module, the identifier sc is used to represent an instance of ath11k_base structure. However, within ath11k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of sc to ab. Compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231014032650.32605-3-quic_periyasa@quicinc.com
2023-10-18wifi: ath11k: rename the wmi_sc naming convention to wmi_abKarthikeyan Periyasamy
In WMI layer module, the identifier wmi_sc is used to represent an instance of ath11k_wmi_base structure. However, within ath11k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of wmi_sc to wmi_ab. Compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231014032650.32605-2-quic_periyasa@quicinc.com
2023-10-18wifi: ath6kl: replace deprecated strncpy with memcpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous interfaces. The affected code's purpose is to truncate strings that are too long with "..." like: foobar -> fo... The lengths have been carefully calculated and as such this has decayed to a simple byte copy from one buffer to another -- let's use memcpy(). Note: build-tested only. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013-strncpy-drivers-net-wireless-ath-ath6kl-init-c-v1-1-d69c599b49a9@google.com
2023-10-18wifi: ath5k: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect led->name to be NUL-terminated based on the presence of a manual NUL-byte assignment. This NUL-byte assignment was added in Commit daf9669bea30aa22 ("ath5k: ensure led name is null terminated"). If strscpy() had existed and had been used back when this code was written then potential bugs and the need to manually NUL-terminate could have been avoided. Since we now have the technology, let's use it :) Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. If NUL-padding is required let's opt for strscpy_pad(). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013-strncpy-drivers-net-wireless-ath-ath5k-led-c-v1-1-3acb0b5a21f2@google.com
2023-10-18wifi: ath12k: Remove ath12k_base::bd_apiJeff Johnson
Currently struct ath12k_base defines the member bd_api. However, this member is only accessed within ath12k_core_fetch_bdf(). Since the scope is local just to that one function, remove it from ath12k_base and instead just use a local stack variable. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013-ath11k_bd_api-v1-2-3fefe4629706@quicinc.com
2023-10-18wifi: ath11k: Remove ath11k_base::bd_apiJeff Johnson
Currently struct ath11k_base defines the member bd_api. However, this member is only accessed within ath11k_core_fetch_bdf(). Since the scope is local just to that one function, remove it from ath11k_base and instead just use a local stack variable. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013-ath11k_bd_api-v1-1-3fefe4629706@quicinc.com
2023-10-18wifi: ath12k: Enable Mesh support for QCN9274Ramya Gnanasekar
Currently QCN9274 supports only AP and station interface modes. Add interface type mesh to ath12k_hw_params for QCN9274 to provide support for mesh mode as well. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013070007.25597-2-quic_rgnanase@quicinc.com
2023-10-18wifi: ath12k: register EHT mesh capabilitiesRamya Gnanasekar
The capabilities for the EHT mesh are generated from the capabilities reported by the firmware. But the firmware only reports the overall capabilities and not the one which are specific for mesh. Capabilities which requires infrastructure setup with a main STA(AP) controlling operations are not needed for mesh and hence remove these capabilities from the list. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013070007.25597-3-quic_rgnanase@quicinc.com
2023-10-18wifi: ath11k: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231009172923.2457844-11-robh@kernel.org
2023-10-18drm/ssd130x: Add support for the SSD132x OLED controller familyJavier Martinez Canillas
The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327) are used by 16 grayscale dot matrix OLED panels, extend the driver to also support this chip family. Instead adding an indirection level to allow the same modesetting pipeline to be used by both controller families, add another pipeline for SSD132x. This leads to some code duplication but it makes the driver easier to read and reason about. Once other controller families are added (e.g: SSD133x), some common code can be factored out in driver helpers to be shared by the different families. But that can be done later once these patterns emerge. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-5-javierm@redhat.com
2023-10-18drm/ssd130x: Rename commands that are shared across chip familiesJavier Martinez Canillas
There are some commands that are shared between the SSD130x and SSD132x controller families, define these as a common SSD13XX set of commands. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-4-javierm@redhat.com
2023-10-18drm/ssd130x: Add a controller family id to the device info dataJavier Martinez Canillas
To allow the driver to have a per Solomon display controller modesetting pipeline and support aother controller families besides SSD130x. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-3-javierm@redhat.com
2023-10-18drm/ssd130x: Replace .page_height field in device info with a constantJavier Martinez Canillas
This deemed useful to avoid hardcoding a page height and allow to support other Solomon controller families, but dividing the screen in pages seems to be something that is specific to the SSD130x chip family. For example, SSD132x chip family divides the screen in segments (columns) and common outputs (rows), so the concept of screen pages does not exist for the SSD132x family. Let's drop this field from the device info struct and just use a constant SSD130X_PAGE_HEIGHT macro to define the page height. While being there, replace hardcoded 8 values in places where it is used as the page height. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-2-javierm@redhat.com
2023-10-18hte: tegra194: don't access struct gpio_chipBartosz Golaszewski
Using struct gpio_chip is not safe as it will disappear if the underlying driver is unbound for any reason. Switch to using reference counted struct gpio_device and its dedicated accessors. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [andy: used gpio_device_find_by_fwnode()] Reviewed-by: Dipen Patel <dipenp@nvidia.com> Link: https://lore.kernel.org/r/20231010151709.4104747-3-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-10-18Merge tag 'amd-drm-next-6.7-2023-10-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.7-2023-10-13: amdgpu: - DC replay fixes - Misc code cleanups and spelling fixes - Documentation updates - RAS EEPROM Updates - FRU EEPROM Updates - IP discovery updates - SR-IOV fixes - RAS updates - DC PQ fixes - SMU 13.0.6 updates - GC 11.5 Support - NBIO 7.11 Support - GMC 11 Updates - Reset fixes - SMU 11.5 Updates - SMU 13.0 OD support - Use flexible arrays for bo list handling - W=1 Fixes - SubVP fixes - DPIA fixes - DCN 3.5 Support - Devcoredump fixes - VPE 6.1 support - VCN 4.0 Updates - S/G display fixes - DML fixes - DML2 Support - MST fixes - VRR fixes - Enable seamless boot in more cases - Enable content type property for HDMI - OLED fixes - Rework and clean up GPUVM TLB flushing - DC ODM fixes - DP 2.x fixes - AGP aperture fixes - SDMA firmware loading cleanups - Cyan Skillfish GPU clock counter fix - GC 11 GART fix - Cache GPU fault info for userspace queries - DC cursor check fixes - eDP fixes - DC FP handling fixes - Variable sized array fixes - SMU 13.0.x fixes - IB start and size alignment fixes for VCN - SMU 14 Support - Suspend and resume sequence rework - vkms fix amdkfd: - GC 11 fixes - GC 10 fixes - Doorbell fixes - CWSR fixes - SVM fixes - Clean up GC info enumeration - Rework memory limit handling - Coherent memory handling fixes - Use partial migrations in GPU faults - TLB flush fixes - DMA unmap fixes - GC 9.4.3 fixes - SQ interrupt fix - GTT mapping fix - GC 11.5 Support radeon: - Misc code cleanups - W=1 Fixes - Fix possible buffer overflow - Fix possible NULL pointer dereference UAPI: - Add EXT_COHERENT memory allocation flags. These allow for system scope atomics. Proposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88 - Add support for new VPE engine. This is a memory to memory copy engine with advanced scaling, CSC, and color management features Proposed mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25713 - Add INFO IOCTL interface to query GPU faults Proposed Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23238 Proposed libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/298 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231013175758.1735031-1-alexander.deucher@amd.com
2023-10-18drm/i915/mtl: Remove the 'force_probe' requirement for Meteor LakeRadhakrishna Sripada
Meteor Lake has demonstrated consistent stability for some time. All user-space API modifications tide to its core platform functions are operational. The necessary firmware components are set up and comprehensive testing has been condused over a period. Given the recent faborable CI results, as well, we believe it's time to eliminate the 'force_probe' prerequisite and activate the platform by default. Signed-off-by: Aditya Chauhan <aditya.chauhan@intel.com> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Lee Shawn C <shawn.c.lee@intel.com> Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231008164824.919262-1-andi.shyti@linux.intel.com
2023-10-18drm/i915: Enable GuC TLB invalidations for MTLJonathan Cavitt
Enable GuC TLB invalidations for MTL. Though more platforms than just MTL support GuC TLB invalidations, MTL is presently the only platform that requires it for any purpose, so only enable it there for now to minimize cross-platform impact. Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-8-jonathan.cavitt@intel.com
2023-10-18drm/i915/gt: Increase sleep in gt_tlb selftest sanitycheckJonathan Cavitt
For the gt_tlb live selftest, when operating on the GSC engine, increase the timeout from 10 ms to 200 ms because the GSC engine is a bit slower than the rest. Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-7-jonathan.cavitt@intel.com
2023-10-18drm/i915: No TLB invalidation on wedged GTJonathan Cavitt
It is not an error for GuC TLB invalidations to fail when the GT is wedged or disabled, so do not process a wait failure as one in guc_send_invalidate_tlb. Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> CC: John Harrison <john.c.harrison@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-6-jonathan.cavitt@intel.com
2023-10-18drm/i915: No TLB invalidation on suspended GTJonathan Cavitt
In case of GT is suspended, don't allow submission of new TLB invalidation request and cancel all pending requests. The TLB entries will be invalidated either during GuC reload or on system resume. Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> CC: John Harrison <john.c.harrison@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-5-jonathan.cavitt@intel.com
2023-10-18drm/i915: Define and use GuC and CTB TLB invalidation routinesPrathap Kumar Valsan
The GuC firmware had defined the interface for Translation Look-Aside Buffer (TLB) invalidation. We should use this interface when invalidating the engine and GuC TLBs. Add additional functionality to intel_gt_invalidate_tlb, invalidating the GuC TLBs and falling back to GT invalidation when the GuC is disabled. The invalidation is done by sending a request directly to the GuC tlb_lookup that invalidates the table. The invalidation is submitted as a wait request and is performed in the CT event handler. This means we cannot perform this TLB invalidation path if the CT is not enabled. If the request isn't fulfilled in two seconds, this would constitute an error in the invalidation as that would constitute either a lost request or a severe GuC overload. With this new invalidation routine, we can perform GuC-based GGTT invalidations. GuC-based GGTT invalidation is incompatible with MMIO invalidation so we should not perform MMIO invalidation when GuC-based GGTT invalidation is expected. The additional complexity incurred in this patch will be necessary for range-based tlb invalidations, which will be platformed in the future. Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> CC: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-4-jonathan.cavitt@intel.com
2023-10-18drm/i915/guc: Add CT size delay helperJonathan Cavitt
As of now, there is no mechanism for tracking a given request's progress through the queue. Instead, add a helper that returns an estimated maximum time the queue should take to drain if completely full. Suggested-by: John Harrison <john.c.harrison@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: John Harrison <john.c.harrison@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-3-jonathan.cavitt@intel.com
2023-10-18drm/i915: Add GuC TLB Invalidation device info flagsJonathan Cavitt
Add device info flags for if GuC TLB Invalidation is enabled. Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-2-jonathan.cavitt@intel.com
2023-10-17drm/i915: Retry gtt fault when out of fence registersVille Syrjälä
If we can't find a free fence register to handle a fault in the GMADR range just return VM_FAULT_NOPAGE without populating the PTE so that userspace will retry the access and trigger another fault. Eventually we should find a free fence and the fault will get properly handled. A further improvement idea might be to reserve a fence (or one per CPU?) for the express purpose of handling faults without having to retry. But that would require some additional work. Looks like this may have gotten broken originally by commit 39965b376601 ("drm/i915: don't trash the gtt when running out of fences") as that changed the errno to -EDEADLK which wasn't handle by the gtt fault code either. But later in commit 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression") I changed it again to -ENOBUFS as -EDEADLK was now getting used for the ww mutex dance. So this fix only makes sense after that last commit. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9479 Fixes: 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012132801.16292-1-ville.syrjala@linux.intel.com Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> (cherry picked from commit 7f403caabe811b88ab0de3811ff3f4782c415761) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-21 10:21:28 +0000