summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-04-04Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"Pali Rohár
This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f. Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") contains proper fix for the issue described in commit bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning"). Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable") Cc: stable@vger.kernel.org # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDERGeert Uytterhoeven
The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder (incl. Marvell CN10K) SoC support, Fixes: 68fa55f0e05c ("perf/marvell: cn10k DDR perf event core ownership") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/18bfd6e1bcf67db7ea656d684a8bbb68261eeb54.1648559364.git.geert+renesas@glider.be Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04perf: qcom_l2_pmu: fix an incorrect NULL check on list iteratorXiaomeng Tong
The bug is here: return cluster; The list iterator value 'cluster' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'cluster' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04reset: tegra-bpmp: Restore Handle errors in BPMP responseSameer Pujar
This reverts following commit 69125b4b9440 ("reset: tegra-bpmp: Revert Handle errors in BPMP response"). The Tegra194 HDA reset failure is fixed by commit d278dc9151a0 ("ALSA: hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of original commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP response") can be removed now. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com
2022-04-04reset: renesas: Check return value of reset_control_deassert()Heiner Kallweit
Deasserting the reset is vital, therefore bail out in case of error. Suggested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/b2131908-0110-006b-862f-080517f3e2d8@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2022-04-04mtd: rawnand: fix ecc parameters for mt7622Chuanhong Guo
According to the datasheet, mt7622 only has 5 ECC capabilities instead of 7, and the decoding error register is arranged as follows: +------+---------+---------+---------+---------+ | Bits | 19:15 | 14:10 | 9:5 | 4:0 | +------+---------+---------+---------+---------+ | Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 | +------+---------+---------+---------+---------+ This means err_mask should be 0x1f instead of 0x3f and the number of bits shifted in mtk_ecc_get_stats should be 5 instead of 8. This commit introduces err_shift for the difference in this register and fix other existing parameters. Public MT7622 reference manual can be found on [0] and the info this commit is based on is from page 656 and page 660. [0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
2022-04-04tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.Jiri Slaby
The below commit changed types of some hooks in struct psc_ops. It also changed the types of the functions which are referenced in the instances of the above struct. However the commit did so only for CONFIG_PPC_MPC52xx, but not for CONFIG_PPC_MPC512x. This results in build errors like: mpc52xx_uart.c:static unsigned int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) mpc52xx_uart.c:static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) ^^^ mpc52xx_uart.c:static int mpc5125_psc_raw_tx_rdy(struct uart_port *port) ^^^ Therefore, fix the latter case now too. Fixes: 18662a1d8f35 (tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned) Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220404055122.31194-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-04iio:proximity:sx9324: Fix hardware gain read/writeStephen Boyd
There are four possible gain values according to 'sx9324_gain_vals[]': 1, 2, 4, and 8 The values are off by one when writing and reading the register. The bits should be set according to this equation: ilog2(<gain>) + 1 so that a gain of 8 is 0x4 in the register field and a gain of 4 is 0x3 in the register field, etc. Note that a gain of 0 is reserved per the datasheet. The default gain (SX9324_REG_PROX_CTRL0_GAIN_1) is also wrong. It should be 0x1 << 3, i.e. 0x8, not 0x80 which is setting the reserved bit 7. Fix this all up to properly handle the hardware gain and return errors for invalid settings. Fixes: 4c18a890dff8 ("iio:proximity:sx9324: Add SX9324 support") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220324222928.874522-1-swboyd@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio:proximity:sx_common: Fix device property parsing on DT systemsStephen Boyd
After commit 7a3605bef878 ("iio: sx9310: Support ACPI property") we started using the 'indio_dev->dev' to extract device properties for various register settings in sx9310_get_default_reg(). This broke DT based systems because dev_fwnode() used in the device_property*() APIs can't find an 'of_node'. That's because the 'indio_dev->dev.of_node' pointer isn't set until iio_device_register() is called. Set the pointer earlier, next to where the ACPI companion is set, so that the device property APIs work on DT systems. Cc: Gwendal Grignou <gwendal@chromium.org> Fixes: 7a3605bef878 ("iio: sx9310: Support ACPI property") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220331210425.3908278-1-swboyd@chromium.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7280a: Fix wrong variable used when setting thresholds.Jonathan Cameron
Name of variable change missed in refactoring patch. Fixes: 112bf4aa4afb ("staging:iio:adc:ad7280a: Switch to standard event control") Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220226175604.662422-1-jic23@kernel.org
2022-04-04iio:filter:admv8818: select REGMAP_SPI for ADMV8818Wang ShaoBo
admv8818 driver needs __devm_regmap_init_spi() which is defined when CONFIG_REGMAP_SPI is set and struct regmap_config when CONFIG_REGMAP is set, so automatically select CONFIG_REGMAP_SPI which also sets CONFIG_REGMAP. Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220320055457.254983-1-bobo.shaobowang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: dac: ad5592r: Fix the missing return value.Zizhuang Deng
The third call to `fwnode_property_read_u32` did not record the return value, resulting in `channel_offstate` possibly being assigned the wrong value. Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com> Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: dac: dac5571: Fix chip id detection for OF devicesJose Cazarin
When matching an OF device, the match mechanism tries all components of the compatible property. This can result with a device matched with a compatible string that isn't the first in the compatible list. For instance, with a compatible property set to compatible = "ti,dac081c081", "ti,dac5571"; the driver will match the second compatible string, as the first one isn't listed in the of_device_id table. The device will however be named "dac081c081" by the I2C core. This causes an issue when identifying the chip. The probe function receives a i2c_device_id that comes from the module's I2C device ID table. There is no entry in that table for "dac081c081", which results in a NULL pointer passed to the probe function. To fix this, add chip_id information in the data field of the OF device ID table, and retrieve it with device_get_match_data() for OF devices. Signed-off-by: Jose Cazarin <joseespiriki@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220324234340.32402-1-laurent.pinchart@ideasonboard.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio:imu:bmi160: disable regulator in error pathTong Zhang
Regulator should be disabled in error path as mentioned in _regulator_put(). Also disable accel if gyro cannot be enabled. [ 16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put [ 16.240453] Call Trace: [ 16.240572] <TASK> [ 16.240676] regulator_put+0x26/0x40 [ 16.240853] regulator_bulk_free+0x26/0x50 [ 16.241050] release_nodes+0x3f/0x70 [ 16.241225] devres_release_group+0x147/0x1c0 [ 16.241441] ? bmi160_core_probe+0x175/0x3a0 [bmi160_core] Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20220327154005.806049-1-ztong0001@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: scd4x: check return of scd4x_write_and_fetchTom Rix
Clang static analysis reports this problem scd4x.c:474:10: warning: The left operand of '==' is a garbage value if (val == 0xff) { ~~~ ^ val is only set from a successful call to scd4x_write_and_fetch() So check it's return. Fixes: 49d22b695cbb ("drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220301025223.223223-1-trix@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: dac: ad3552r: fix signedness bug in ad3552r_reset()Dan Carpenter
The "val" variable is used to store either negative error codes from ad3552r_read_reg_wrapper() or positive u16 values on success. It needs to be signed for the error handling to work correctly. Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220316122354.GA16825@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04regulator: atc260x: Fix missing active_discharge_on settingAxel Lin
Without active_discharge_on setting, the SWITCH1 discharge enable control is always disabled. Fix it. Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: mxic: Fix an error handling path in mxic_spi_probe()Christophe JAILLET
If spi_register_master() fails, we must undo a previous mxic_spi_mem_ecc_probe() call, as already done in the remove function. Fixes: 00360ebae483 ("spi: mxic: Add support for pipelined ECC operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: rpc-if: Fix RPM imbalance in probe error pathGeert Uytterhoeven
If rpcif_hw_init() fails, Runtime PM is left enabled. Fixes: b04cc0d912eb80d3 ("memory: renesas-rpc-if: Add support for RZ/G2L") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1c78a1f447d019bb66b6e7787f520ae78821e2ae.1648562287.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: rtq2134: Fix missing active_discharge_on settingAxel Lin
The active_discharge_on setting was missed, so output discharge resistor is always disabled. Fix it. Fixes: 0555d41497de ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: wm8994: Add an off-on delay for WM8994 variantJonathan Bakker
As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04gpu: ipu-v3: Fix dev_dbg frequency outputLeo Ruan
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
2022-04-04drm/imx: dw_hdmi-imx: Fix bailout in error cases of probeLiu Ying
In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns successfully, dw_hdmi_remove() should be called where necessary as bailout. Fixes: c805ec7eb210 ("drm/imx: dw_hdmi-imx: move initialization into probe") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220128091944.3831256-1-victor.liu@nxp.com
2022-04-04drm/imx: Fix memory leak in imx_pd_connector_get_modesJosé Expósito
Avoid leaking the display mode variable if of_get_drm_display_mode fails. Fixes: 76ecd9c9fb24 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()") Addresses-Coverity-ID: 1443943 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220108165230.44610-1-jose.exposito89@gmail.com
2022-04-04drm/imx: imx-ldb: Check for null pointer after calling kmemdupJiasheng Jiang
As the possible failure of the allocation, kmemdup() may return NULL pointer. Therefore, it should be better to check the return value of kmemdup() and return error if fails. Fixes: dc80d7038883 ("drm/imx-ldb: Add support to drm-bridge") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220105074729.2363657-1-jiasheng@iscas.ac.cn
2022-04-04firmware: arm_scmi: Remove clear channel call on the TX channelCristian Marussi
On SCMI transports whose channels are based on a shared resource the TX channel area has to be acquired by the agent before placing the desired command into the channel and it will be then relinquished by the platform once the related reply has been made available into the channel. On an RX channel the logic is reversed with the platform acquiring the channel area and the agent reliquishing it once done by calling the scmi_clear_channel() helper. As a consequence, even in case of error, the agent must never try to clear a TX channel from its side: restrict the existing clear channel call on the the reply path only to delayed responses since they are indeed coming from the RX channel. Link: https://lore.kernel.org/r/20220224152404.12877-1-cristian.marussi@arm.com Fixes: e9b21c96181c ("firmware: arm_scmi: Make .clear_channel optional") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-04video: fbdev: omap: Make it CCF clk API compatibleJanusz Krzysztofik
OMAP1 LCDC drivers now omit clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the drivers to be compatible with CCF implementation of clock API. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.hChristophe Leroy
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up, first add missing headers in users of asm/prom.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: pm2fb: Fix a kernel-doc formatting issueHaowen Bai
This function had kernel-doc that not used a hash to separate the function name from the one line description. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300()Haowen Bai
Do no access bios[] if it's NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: pxafb: use if else insteadWang Qing
use if and else instead of consequent if(A) and if (!A) Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: udlfb: properly check endpoint typePavel Skripkin
syzbot reported warning in usb_submit_urb, which is caused by wrong endpoint type. This driver uses out bulk endpoint for communication, so let's check if this endpoint is present and bail out early if not. Fail log: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 Modules linked in: CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0 ... Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 ... Call Trace: dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 Fixes: 88e58b1a42f8 ("Staging: add udlfb driver") Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: of: display_timing: Remove a redundant zeroing of memoryChristophe JAILLET
of_parse_display_timing() already call memset(0) on its 2nd argument, so there is no need to clear it explicitly before calling this function. Use kmalloc() instead of kzalloc() to save a few cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platformsVladimir Zapolskiy
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is obtained from another register REG_DOMAIN_STATE, thus the helper function qcom_lmh_get_throttle_freq() should be modified accordingly, as for now it returns gibberish since .reg_current_vote is unset for EPSS hardware. To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate in KHz. Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: provide online/offline operationsDmitry Baryshkov
Provide lightweight online and offline operations. This saves us from parsing and tearing down the OPP tables each time the CPU is put online or offline. Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: fix the opp entries refcountingDmitry Baryshkov
The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for throttling, but will not put it, ending up with leaking a reference count and the following backtrace when putting the CPU offline. Correctly put the reference count of the returned opp instance. [ 84.418025] ------------[ cut here ]------------ [ 84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190 [ 84.431966] Modules linked in: [ 84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S 5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721 [ 84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) [ 84.458781] pc : _opp_table_kref_release+0x188/0x190 [ 84.463878] lr : _opp_table_kref_release+0x78/0x190 [ 84.468885] sp : ffff80000841bc70 [ 84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908 [ 84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0 [ 84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80 [ 84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff [ 84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448 [ 84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000 [ 84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000 [ 84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001 [ 84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00 [ 84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0 [ 84.545579] Call trace: [ 84.548101] _opp_table_kref_release+0x188/0x190 [ 84.552842] dev_pm_opp_remove_all_dynamic+0x8c/0xc0 [ 84.557949] qcom_cpufreq_hw_cpu_exit+0x30/0xdc [ 84.562608] cpufreq_offline.isra.0+0x1b4/0x1d8 [ 84.567270] cpuhp_cpufreq_offline+0x10/0x6c [ 84.571663] cpuhp_invoke_callback+0x16c/0x2b0 [ 84.576231] cpuhp_thread_fun+0x190/0x250 [ 84.580353] smpboot_thread_fn+0x12c/0x230 [ 84.584568] kthread+0xfc/0x100 [ 84.587810] ret_from_fork+0x10/0x20 [ 84.591490] irq event stamp: 3482 [ 84.594901] hardirqs last enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c [ 84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c [ 84.611074] softirqs last enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588 [ 84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174 [ 84.627691] ---[ end trace 0000000000000000 ]--- Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: fix the race between LMH worker and cpuhpDmitry Baryshkov
The driver would disable the worker when cpu is being put offline, but it happens closer to the end of cpufreq_offline(). The function qcom_lmh_dcvs_poll() can be running in parallel with this, when policy->cpus already has been updated. Read policy->related_cpus instead. [ 37.122433] ------------[ cut here ]------------ [ 37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100 [ 37.138098] Modules linked in: [ 37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S 5.17.0-rc6-00389-g37c83d0b8710-dirty #713 [ 37.158306] Workqueue: events qcom_lmh_dcvs_poll [ 37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 37.170278] pc : topology_update_thermal_pressure+0xec/0x100 [ 37.176131] lr : topology_update_thermal_pressure+0x20/0x100 [ 37.181977] sp : ffff800009b6bce0 [ 37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205 [ 37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000 [ 37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000 [ 37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000 [ 37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2 [ 37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040 [ 37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674 [ 37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c [ 37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100 [ 37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100 [ 37.259235] Call trace: [ 37.261771] topology_update_thermal_pressure+0xec/0x100 [ 37.267266] qcom_lmh_dcvs_poll+0xbc/0x154 [ 37.271505] process_one_work+0x288/0x69c [ 37.275654] worker_thread+0x74/0x470 [ 37.279450] kthread+0xfc/0x100 [ 37.282712] ret_from_fork+0x10/0x20 [ 37.286417] irq event stamp: 74 [ 37.289664] hardirqs last enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80 [ 37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10 [ 37.306885] softirqs last enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588 [ 37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174 [ 37.323386] ---[ end trace 0000000000000000 ]--- Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: drop affinity hint before freeing the IRQDmitry Baryshkov
Drop affinity hint before freeing the throttling IRQ to fix the following trace: [ 185.114773] ------------[ cut here ]------------ [ 185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc [ 185.127474] Modules linked in: [ 185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S W 5.17.0-rc6-00386-g67382a5b705d-dirty #690 [ 185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 185.154269] pc : free_irq+0x3a4/0x3dc [ 185.158031] lr : free_irq+0x33c/0x3dc [ 185.161792] sp : ffff80000841bc90 [ 185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908 [ 185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0 [ 185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000 [ 185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff [ 185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7 [ 185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040 [ 185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408 [ 185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4 [ 185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108 [ 185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000 [ 185.238421] Call trace: [ 185.240932] free_irq+0x3a4/0x3dc [ 185.244334] qcom_cpufreq_hw_cpu_exit+0x78/0xcc [ 185.248985] cpufreq_offline.isra.0+0x228/0x270 [ 185.253639] cpuhp_cpufreq_offline+0x10/0x20 [ 185.258027] cpuhp_invoke_callback+0x16c/0x2b0 [ 185.262592] cpuhp_thread_fun+0x190/0x250 [ 185.266710] smpboot_thread_fn+0x12c/0x230 [ 185.270914] kthread+0xfc/0x100 [ 185.274145] ret_from_fork+0x10/0x20 [ 185.277820] irq event stamp: 212 [ 185.281136] hardirqs last enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0 [ 185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10 [ 185.299081] softirqs last enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14 [ 185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0 Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts") Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOsChristian Lamparter
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with the a message: "READ LOG DMA EXT failed, trying PIO" during boot. Initially this was discovered because it caused a crash with the sata_dwc_460ex controller on a WD MyBook Live DUO. The reporter "Tice Rex" which has the unique opportunity that he has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q" which booted fine and didn't expose "READ LOG DMA EXT". But the newer/latest firmware "EXT0DB6Q" caused the headaches. BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-04ata: sata_dwc_460ex: Fix crash due to OOB writeChristian Lamparter
the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c403683c ("libata: add extra internal command") Cc: stable@kernel.org # 4.18+ BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-04ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()Damien Le Moal
When returning false, ata_sff_altstatus() does not return any status value, resulting in a compilation warning in ata_sff_lost_interrupt() ("uninitialized symbol 'status'"). Fix this by initializing the local variable "status" to 0. Fixes: 03c0e84f9c1e ("ata: libata-sff: refactor ata_sff_altstatus()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-02Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fix from Jens Axboe: "Got two reports on nbd spewing warnings on load now, which is a regression from a commit that went into your tree yesterday. Revert the problematic change for now" * tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block: Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
2022-04-02Merge tag 'pci-v5.18-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Fix Hyper-V "defined but not used" build issue added during merge window (YueHaibing) * tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hv: Remove unused hv_set_msi_entry_from_desc()
2022-04-02Merge tag 'tag-chrome-platform-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Check for EC device - Fix a crash when using the cros_ec_typec driver on older hardware not capable of typec commands - Make try power role optional - Mux configuration reorganization series from Prashant cros_ec_debugfs: - Fix use after free. Thanks Tzung-bi sensorhub: - cros_ec_sensorhub fixup - Split trace include file misc: - Add new mailing list for chrome-platform development: chrome-platform@lists.linux.dev Now with patchwork!" * tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: detach log reader wq from devm platform: chrome: Split trace include file platform/chrome: cros_ec_typec: Update mux flags during partner removal platform/chrome: cros_ec_typec: Configure muxes at start of port update platform/chrome: cros_ec_typec: Get mux state inside configure_mux platform/chrome: cros_ec_typec: Move mux flag checks platform/chrome: cros_ec_typec: Check for EC device platform/chrome: cros_ec_typec: Make try power role optional MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
2022-04-02Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"Jens Axboe
This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54. Both Gabriel and Borislav report that this commit casues a regression with nbd: sysfs: cannot create duplicate filename '/dev/block/43:0' Revert it before 5.18-rc1 and we'll investigage this separately in due time. Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/ Reported-by: Gabriel L. Somlo <somlo@cmu.edu> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-01net: stmmac: Fix unset max_speed difference between DT and non-DT platformsChen-Yu Tsai
In commit 9cbadf094d9d ("net: stmmac: support max-speed device tree property"), when DT platforms don't set "max-speed", max_speed is set to -1; for non-DT platforms, it stays the default 0. Prior to commit eeef2f6b9f6e ("net: stmmac: Start adding phylink support"), the check for a valid max_speed setting was to check if it was greater than zero. This commit got it right, but subsequent patches just checked for non-zero, which is incorrect for DT platforms. In commit 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()") the conversion switched completely to checking for non-zero value as a valid value, which caused 1000base-T to stop getting advertised by default. Instead of trying to fix all the checks, simply leave max_speed alone if DT property parsing fails. Fixes: 9cbadf094d9d ("net: stmmac: support max-speed device tree property") Fixes: 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-01net/fungible: Fix reference to __udivdi3 on 32b buildsDimitris Michailidis
32b builds with CONFIG_PHYS_ADDR_T_64BIT=y, such as i386 PAE, raise a linker error due to a 64b division: ld: drivers/net/ethernet/fungible/funcore/fun_dev.o: in function `fun_dev_enable': (.text+0xe1a): undefined reference to `__udivdi3' The divisor in the offendinng expression is a power of 2. Change it to use an explicit right shift. Fixes: e1ffcc66818f ("net/fungible: Add service module for Fungible drivers") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220401232411.313881-1-dmichail@fungible.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-01Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fixes from Jens Axboe: "Followup block driver updates and fixes for the 5.18-rc1 merge window. In detail: - NVMe pull request - Fix multipath hang when disk goes live over reconnect (Anton Eidelman) - fix RCU hole that allowed for endless looping in multipath round robin (Chris Leech) - remove redundant assignment after left shift (Colin Ian King) - add quirks for Samsung X5 SSDs (Monish Kumar R) - fix the read-only state for zoned namespaces with unsupposed features (Pankaj Raghav) - use a private workqueue instead of the system workqueue in nvmet (Sagi Grimberg) - allow duplicate NSIDs for private namespaces (Sungup Moon) - expose use_threaded_interrupts read-only in sysfs (Xin Hao)" - nbd minor allocation fix (Zhang) - drbd fixes and maintainer addition (Lars, Jakob, Christoph) - n64cart build fix (Jackie) - loop compat ioctl fix (Carlos) - misc fixes (Colin, Dongli)" * tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block: drbd: remove check of list iterator against head past the loop body drbd: remove usage of list iterator variable after loop nbd: fix possible overflow on 'first_minor' in nbd_dev_add() MAINTAINERS: add drbd co-maintainer drbd: fix potential silent data corruption loop: fix ioctl calls using compat_loop_info nvme-multipath: fix hang when disk goes live over reconnect nvme: fix RCU hole that allowed for endless looping in multipath round robin nvme: allow duplicate NSIDs for private namespaces nvmet: remove redundant assignment after left shift nvmet: use a private workqueue instead of the system workqueue nvme-pci: add quirks for Samsung X5 SSDs nvme-pci: expose use_threaded_interrupts read-only in sysfs nvme: fix the read-only state for zoned namespaces with unsupposed features n64cart: convert bi_disk to bi_bdev->bd_disk fix build xen/blkfront: fix comment for need_copy xen-blkback: remove redundant assignment to variable i
generated by cgit (git 2.34.1) at 2025-09-13 14:35:16 +0000