| Age | Commit message (Collapse) | Author |
|---|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/char/hw_random to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A bdev discard granularity is always at least SECTOR_SIZE, so don't check
for a zero value.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241101092215.422428-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Enable device-specific ACS-like functionality even if the device
doesn't advertise an ACS capability, which got broken when adding
fancy ACS kernel parameter (Jason Gunthorpe)
* tag 'pci-v6.12-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix pci_enable_acs() support for the ACS quirks
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, nothing too out of the ordinary, the mediatek
fixes came in a batch that I might have preferred a bit earlier but
all seem fine, otherwise regular xe/amdgpu and a few misc ones.
xe:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
- Workaround LNL GGTT invalidation not being visible to GuC
- Avoid getting jobs stuck without a protecting timeout
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
amdgpu:
- DCN 3.5 fix
- Vangogh SMU KASAN fix
- SMU 13 profile reporting fix
mediatek:
- Fix degradation problem of alpha blending
- Fix color format MACROs in OVL
- Fix get efuse issue for MT8188 DPTX
- Fix potential NULL dereference in mtk_crtc_destroy()
- Correct dpi power-domains property
- Add split subschema property constraints"
* tag 'drm-fixes-2024-11-02' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/xe: Don't short circuit TDR on jobs not started
drm/xe: Add mmio read before GGTT invalidate
drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()
drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic()
drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()
drm/panthor: Report group as timedout when we fail to properly suspend
drm/panthor: Fail job creation when the group is dead
drm/panthor: Fix firmware initialization on systems with a page size > 4k
accel/ivpu: Fix NOC firewall interrupt handling
drm/xe/display: Add missing HPD interrupt enabling during non-d3cold RPM resume
drm/xe/display: Separate the d3cold and non-d3cold runtime PM handling
drm/xe: Remove runtime argument from display s/r functions
drm/amdgpu/smu13: fix profile reporting
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
Revert "drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35"
drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM
drm/tegra: Fix NULL vs IS_ERR() check in probe()
dt-bindings: display: mediatek: split: add subschema property constraints
dt-bindings: display: mediatek: dpi: correct power-domains property
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Ira Weiny:
"The bulk of these fixes center around an initialization order bug
reported by Gregory Price and some additional fall out from the
debugging effort.
In summary, cxl_acpi and cxl_mem race and previously worked because of
a bus_rescan_devices() while testing without modules built in.
Unfortunately with modules built in the rescan would fail due to the
cxl_port driver being registered late via the build order. Furthermore
it was found bus_rescan_devices() did not guarantee a probe barrier
which CXL was expecting. Additional fixes to cxl-test and decoder
allocation came along as they were found in this debugging effort.
The other fixes are pretty minor but one affects trace point data seen
by user space.
Summary:
- Fix crashes when running with cxl-test code
- Fix Trace DRAM Event Record field decodes
- Fix module/built in initialization order errors
- Fix use after free on decoder shutdowns
- Fix out of order decoder allocations
- Improve cxl-test to better reflect real world systems"
* tag 'cxl-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Improve init-order fidelity relative to real-world systems
cxl/port: Prevent out-of-order decoder allocation
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
cxl/acpi: Ensure ports ready at cxl_acpi_probe() return
cxl/port: Fix cxl_bus_rescan() vs bus_rescan_devices()
cxl/port: Fix CXL port initialization order when the subsystem is built-in
cxl/events: Fix Trace DRAM Event Record
cxl/core: Return error when cxl_endpoint_gather_bandwidth() handles a non-PCI device
|
|
Move existing register definitions to mdss.xml and use generated defines
for registers access instead of hand-coding everything in the source
file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/615312/
Link: https://lore.kernel.org/r/20240921-msm-mdss-ubwc-v1-2-411dcf309d05@linaro.org
|
|
In preparation of adding more registers, move MDSS-related headers to
the separate top-level file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/615310/
Link: https://lore.kernel.org/r/20240921-msm-mdss-ubwc-v1-1-411dcf309d05@linaro.org
|
|
Move a call to dpu_plane_check_inline_rotation() to the
dpu_plane_atomic_check_sspp() function, so that the rot90 constraints
are checked for both SSPP blocks. Also move rotation field from struct
dpu_plane_state to struct dpu_sw_pipe_cfg.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/621485/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-6-0310fd519765@linaro.org
|
|
Split dpu_plane_atomic_check() function into two pieces:
dpu_plane_atomic_check_nosspp() performing generic checks on the pstate,
without touching the associated SSPP blocks,
and
dpu_plane_atomic_check_sspp(), which takes into account used SSPPs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/621484/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-5-0310fd519765@linaro.org
|
|
Max upscale / downscale factors are constant between platforms. In
preparation to adding support for virtual planes and allocating SSPP
blocks on demand move max scaling factors out of the HW catalog and
handle them in the dpu_plane directly. If any of the scaling blocks gets
different limitations, this will have to be handled separately, after
the plane refactoring.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/621481/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-4-0310fd519765@linaro.org
|
|
The virt_formats / virt_num_formats are not used by the current driver
and are not going to be used in future since formats for virtual planes
are handled in a different way, by forbidding unsupported combinations
during atomic_check. Drop those fields now.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/621479/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-3-0310fd519765@linaro.org
|
|
In preparation for virtualized planes support, move pstate->pipe
initialization from dpu_plane_reset() to dpu_plane_atomic_check(). In
case of virtual planes the plane's pipe will not be known up to the
point of atomic_check() callback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/621477/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-2-0310fd519765@linaro.org
|
|
Use the drm_rect_fp_to_int() helper instead of using the hand-written
code.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/621476/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-1-0310fd519765@linaro.org
|
|
Pull block fixes from Jens Axboe:
- Fixup for a recent blk_rq_map_user_bvec() patch
- NVMe pull request via Keith:
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)
* tag 'block-6.12-20241101' of git://git.kernel.dk/linux:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
block: fix queue limits checks in blk_rq_map_user_bvec for real
nvme: enhance cns version checking
|
|
Without SMP enabled (such as in allnoconfig), there is a Kconfig warning
because CONFIG_IRQ_EFFECTIVE_AFF_MASK is unconditionally selected by
CONFIG_MIPS_GIC:
WARNING: unmet direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK
Depends on [n]: SMP [=n]
Selected by [y]:
- MIPS_GIC [=y]
Add a dependency on SMP to the selection, which matches all other
selections of CONFIG_IRQ_EFFECTIVE_AFF_MASK.
Fixes: 322a90638768 ("irqchip/mips-gic: Multi-cluster support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241101-mips-fix-generic_irq_effective_aff_mask-select-v1-1-d94db6e0de0d@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make the ACPI CPPC library use a raw spinlock for operations carried
out in scheduler context via the schedutil governor and the ACPI CPPC
cpufreq driver (Pierre Gondois)"
* tag 'acpi-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Make rmw_lock a raw_spin_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an uninitialized variable in GPIO swnode code
- add a missing return value check for devm_mutex_init()
- fix an old issue with debugfs output
* tag 'gpio-fixes-for-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: fix debugfs dangling chip separator
gpiolib: fix debugfs newline separators
gpio: sloppy-logic-analyzer: Check for error code from devm_mutex_init() call
gpio: fix uninit-value in swnode_find_gpio
|
|
Lockdep gives a false positive splat as it can't distinguish the lock
which is taken by different IRQ descriptors from different IRQ chips
that are organized in a way of a hierarchy:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W
------------------------------------------------------
modprobe/141 is trying to acquire lock:
ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90
but task is already holding lock:
ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
which lock already depends on the new lock.
-> #3 (&d->lock){+.+.}-{4:4}:
-> #2 (&desc->request_mutex){+.+.}-{4:4}:
-> #1 (ipclock){+.+.}-{4:4}:
-> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}:
Chain exists of:
intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&d->lock);
lock(&desc->request_mutex);
lock(&d->lock);
lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock);
*** DEADLOCK ***
3 locks held by modprobe/141:
#0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250
#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790
#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
Set a lockdep class when we map the IRQ so that it doesn't warn about
a lockdep bug that doesn't exist.
Fixes: 4af8be67fd99 ("regmap: Convert regmap_irq to use irq_domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241101165553.4055617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
(Imre / Maarten)
- Workaround LNL GGTT invalidation not being visible to GuC
(Matthew Brost)
- Avoid getting jobs stuck without a protecting timeout (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tsbftadm7owyizzdaqnqu7u4tqggxgeqeztlfvmj5fryxlfomi@5m5bfv2zvzmw
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The important one is a change to the way in which we handle protection
keys around signal delivery so that we're more closely aligned with
the x86 behaviour, however there is also a revert of the previous fix
to disable software tag-based KASAN with GCC, since a workaround
materialised shortly afterwards.
I'd love to say we're done with 6.12, but we're aware of some
longstanding fpsimd register corruption issues that we're almost at
the bottom of resolving.
Summary:
- Fix handling of POR_EL0 during signal delivery so that pushing the
signal context doesn't fail based on the pkey configuration of the
interrupted context and align our user-visible behaviour with that
of x86.
- Fix a bogus pointer being passed to the CPU hotplug code from the
Arm SDEI driver.
- Re-enable software tag-based KASAN with GCC by using an alternative
implementation of '__no_sanitize_address'"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v6.13-rc1
This contains a revert for a patch that I had modified before applying
and the author didn't agree with the change.
* tag 'tegra-for-6.13-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
Revert "firmware: tegra: bpmp: Use scoped device node handling to simplify error paths"
Link: https://lore.kernel.org/r/20241025150555.2558582-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into arm/drivers
HiSilicon driver updates for v6.13
- Add the sysfs to show all HCCS types used on the platform
- Add the low power feature for HCCS by adjusting the lane number
- Few cleanups and improvements: correct a PCC typo, verify the die, port
information, base address and size, update the lane_mode to max_lane_num
* tag 'hisi-drivers-for-6.13' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Support low power feature for the specified HCCS type
soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs
soc: hisilicon: kunpeng_hccs: Fix the 'lane_mode' field name in port info structure to 'max_lane_num'
soc: hisilicon: kunpeng_hccs: Add the check for base address and size of shared memory
soc: hisilicon: kunpeng_hccs: Return failure on having not die or port information
soc: hisilicon: kunpeng_hccs: Fix a PCC typo
Link: https://lore.kernel.org/r/671B3FBD.8050905@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/soc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Herve Codina <herve.codina@bootlin.com> # for fsl/qe/{qmc,tsa}.c
Acked-by: Bjorn Andersson <andersson@kernel.org> # qcom parts
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed
Link: https://lore.kernel.org/r/20241029074859.509587-2-u.kleine-koenig@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time.
So, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 9e3a000362ae ("spi: zynqmp: Add pm runtime support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240920091135.2741574-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RTL9300 has some limitations on the maximum DMA transfers possible.
For reads this is 2080 bytes (520*4) for writes this is 520 bytes. Deal
with this by splitting transfers into appropriately sized parts.
Fixes: 42d20a6a61b8 ("spi: spi-mem: Add Realtek SPI-NAND controller")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://patch.msgid.link/20241030194920.3202282-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A shift-out-of-bounds issue was identified by UBSAN in the
tegra_qspi_fill_tx_fifo_from_client_txbuf() function.
UBSAN: shift-out-of-bounds in drivers/spi/spi-tegra210-quad.c:345:27
shift exponent 32 is too large for 32-bit type 'u32' (aka 'unsigned int')
Call trace:
tegra_qspi_start_cpu_based_transfer
The problem arises when shifting the contents of tx_buf left by 8 times
the value of i, which can exceed 4 and result in an exponent larger than
32 bits.
Resolve this by restrict the value of i to be less than 4, preventing
the shift operation from overflowing.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Link: https://patch.msgid.link/20241004125400.1791089-1-leitao@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into HEAD
Arm SCMI fixes for v6.12(part 2)
Couple of fixes to address slab-use-after-free in scmi_bus_notifier()
via scmi_dev->name and possible incorrect clear channel transport
operation on A2P channel if some sort of P2A only messages are initiated
on A2P channel(occurs when stress tested passing /dev/random to the
channel).
Apart from this, there are fixes to address missing "arm" prefix in the
recently added property max-rx-timeout-ms which was missed in the review
but was identified when further additions to the same binding were
getting reviewed.
* tag 'scmi-fixes-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
firmware: arm_scmi: Reject clear channel request on A2P
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
Link: https://lore.kernel.org/r/20241031172734.3109140-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into HEAD
RISC-V soc fixes for v6.12-rc6
StarFive:
Two minor dts fixes, one setting the correct eth phy delay parameters
and one disabling unused nodes that caused warnings at probe time.
Firmware:
Fix the poll_complete() implementation in the auto-update driver so that
it behaves as the framework expects.
Misc:
Update the maintainer pattern for my dts entry, so that it covers
the specific platforms listed , rather than including all riscv
platforms with the list platforms excluded.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: invert Misc RISC-V SoC Support's pattern
riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64
riscv: dts: starfive: disable unused csi/camss nodes
firmware: microchip: auto-update: fix poll_complete() to not report spurious timeout errors
Link: https://lore.kernel.org/r/20241031-colossal-cassette-617817c9bec3@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently, RK809's BUCK3 regulator is modelled in the driver as a
configurable regulator with 0.5-2.4V voltage range. But the voltage
setting is not actually applied, because when bit 6 of
PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage
is determined by the external feedback resistor. Fix this, by setting
bit 6 when voltage selection is set. Existing users which do not
specify voltage constraints in their device trees will not be affected
by this change, since no voltage setting is applied in those cases,
and bit 6 is not enabled.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a pr_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20241101110230.3303197-1-colin.i.king@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.
Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!"
Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@vger.kernel.org
Message-ID: <20241101101252.1448466-1-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Starting with display version 13 the fuse bit to disable Display PM has
been removed.
v2: Bit removed starting with display version 13 (MattR)
v3: DG2 still uses this fuse bit (MattR)
Bspec: 50075, 69464
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030195507.2753404-1-clinton.a.taylor@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The recent attempt to make the MediaTek DRM driver build for non-ARM
compile tests made the driver unbuildable for arm64 platforms. Since
this is used on both ARM and arm64 platforms, just drop the dependency
on ARM.
Fixes: d2db0b8fd70b ("drm/mediatek: Allow build with COMPILE_TEST=y")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029111309.737263-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
All of the previous pull request, with MORE!
Core Changes:
- Update documentation for scheduler start/stop and job init.
- Add dedede and sm8350-hdk hardware to ci runs.
Driver Changes:
- Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d,
panthor docs, and leadtek-ltk050h3146w.
- Crashdump support for qaic.
- Support DP compliance in zynqmp.
- Add Samsung S6E88A0-AMS427AP24 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
|
|
Pull rdma fixes from Jason Gunthorpe:
- Put the QP netlink dump back in cxgb4, fixes a user visible
regression
- Don't change the rounding style in mlx5 for user provided rd_atomic
values
- Resolve a race in bnxt_re around the qp-handle table array
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: synchronize the qp-handle table array
RDMA/bnxt_re: Fix the usage of control path spin locks
RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down
RDMA/cxgb4: Dump vendor specific QP details
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241029232721.8442-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sparse warns:
note: in included file (through ../include/trace/trace_events.h,
../include/trace/define_trace.h,
../drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h):
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] fd_status
got restricted __be32 const [usertype] status
We take struct qm_fd :: status, store it and print it as an u32,
though it is a big endian field. We should print the FD status in
CPU endianness for ease of debug and consistency between PowerPC and
Arm systems.
Though it is a not often used debug feature, it is best to treat it as
a bug and backport the format change to all supported stable kernels,
for consistency.
Fixes: eb11ddf36eb8 ("dpaa_eth: add trace points")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20241029163105.44135-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set pause_data to all of the scan channels, excluding the OP channel,
to prevent data frame transmission to the scan channels, which causes
retransmission. Additionally, this flag won't affect the transmission
of probe requests from the scan channels.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241026022143.7304-1-pkshih@realtek.com
|
|
In WoWLAN mode, driver will disable interrupt after calling H2C command
for entering PS mode, but it may lead to failing to enter deep PS mode by
firmware because the done-ack of the H2C from firmware is not handled by
driver. In fact, the done-ack for entering PS is not necessary for driver
to check, so remove it.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241024055509.8000-1-pkshih@realtek.com
|
|
The MAC address of VF can be configured through the mailbox mechanism of
ENETC, but the previous implementation forgot to set the MAC address in
net_device, resulting in the SMAC of the sent frames still being the old
MAC address. Since the MAC address in the hardware has been changed, Rx
cannot receive frames with the DMAC address as the new MAC address. The
most obvious phenomenon is that after changing the MAC address, we can
see that the MAC address of eno0vf0 has not changed through the "ifconfig
eno0vf0" command and the IP address cannot be obtained .
root@ls1028ardb:~# ifconfig eno0vf0 down
root@ls1028ardb:~# ifconfig eno0vf0 hw ether 00:04:9f:3a:4d:56 up
root@ls1028ardb:~# ifconfig eno0vf0
eno0vf0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 66:36:2c:3b:87:76 txqueuelen 1000 (Ethernet)
RX packets 794 bytes 69239 (69.2 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11 bytes 2226 (2.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241029090406.841836-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cell-index value is obtained from Device Tree and then used to calculate
the index for accessing arrays port_mfl[], mac_mfl[] and intr_mng[].
In case of broken DT due to any error cell-index can contain any value
and it is possible to go beyond the array boundaries which can lead
at least to memory corruption.
Validate cell-index value obtained from Device Tree.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20241028065824.15452-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Additionally, pass KBUILD_MODNAME to that function, since the 'name'
parameter should indicate who (i.e., which driver) has requested the
resource.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patch.msgid.link/20241028095943.20498-2-pstanner@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Lee Trager <lee@trager.us>
Link: https://patch.msgid.link/20241025203757.288367-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc6).
Conflicts:
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd")
188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links")
https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/
net/mac80211/cfg.c
c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx")
drivers/net/ethernet/intel/ice/ice_ptp_hw.h
6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM")
e4291b64e118 ("ice: Align E810T GPIO to other products")
ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions")
ac532f4f4251 ("ice: Cleanup unused declarations")
https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The const MAX_BRIDGES is unused after the commit 4d1a1e4686bd ("drm/msm:
remove msm_drm_private::bridges field"), drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622537/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-3-8ffa8122d3b6@linaro.org
|
|
The MAX_H_TILES_PER_DISPLAY const is only used by the DPU driver, move
it to the corresponding header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622536/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-2-8ffa8122d3b6@linaro.org
|
|
The struct msm_display_topology is only used by the DPU driver. Remove
it from the global header and move it to DPU-specific header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622534/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-1-8ffa8122d3b6@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi, bluetooth and netfilter.
No known new regressions outstanding.
Current release - regressions:
- wifi: mt76: do not increase mcu skb refcount if retry is not
supported
Current release - new code bugs:
- wifi:
- rtw88: fix the RX aggregation in USB 3 mode
- mac80211: fix memory corruption bug in struct ieee80211_chanctx
Previous releases - regressions:
- sched:
- stop qdisc_tree_reduce_backlog on TC_H_ROOT
- sch_api: fix xa_insert() error path in tcf_block_get_ext()
- wifi:
- revert "wifi: iwlwifi: remove retry loops in start"
- cfg80211: clear wdev->cqm_config pointer on free
- netfilter: fix potential crash in nf_send_reset6()
- ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find()
- bluetooth: fix null-ptr-deref in hci_read_supported_codecs
- eth: mlxsw: add missing verification before pushing Tx header
- eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of
bounds issue
Previous releases - always broken:
- wifi: mac80211: do not pass a stopped vif to the driver in
.get_txpower
- netfilter: sanitize offset and length before calling skb_checksum()
- core:
- fix crash when config small gso_max_size/gso_ipv4_max_size
- skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
- mptcp: protect sched with rcu_read_lock
- eth: ice: fix crash on probe for DPLL enabled E810 LOM
- eth: macsec: fix use-after-free while sending the offloading packet
- eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data
- eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices
- eth: mtk_wed: fix path of MT7988 WO firmware"
* tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
net: hns3: don't auto enable misc vector
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
net: hns3: fix missing features due to dev->features configuration too early
net: hns3: fixed reset failure issues caused by the incorrect reset type
net: hns3: add sync command to sync io-pgtable
net: hns3: default enable tx bounce buffer when smmu enabled
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
net: ethernet: mtk_wed: fix path of MT7988 WO firmware
selftests: forwarding: Add IPv6 GRE remote change tests
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
mlxsw: pci: Sync Rx buffers for device
mlxsw: pci: Sync Rx buffers for CPU
mlxsw: spectrum_ptp: Add missing verification before pushing Tx header
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
...
|
