summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-14vrf: fix a comment about loopback deviceNicolas Dichtel
This is a leftover of the below commit. Fixes: 4f04256c983a ("net: vrf: Drop local rtable and rt6_info") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: remove duplicate napi_schedule call in open functionLijun Pan
Remove the unnecessary napi_schedule() call in __ibmvnic_open() since interrupt_rx() calls napi_schedule_prep/__napi_schedule during every receive interrupt. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: remove duplicate napi_schedule call in do_reset functionLijun Pan
During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(), which will calls napi_schedule if previous state is VNIC_CLOSED (i.e, the reset case, and "ifconfig down" case). So there is no need for do_reset to call napi_schedule again at the end of the function though napi_schedule will neglect the request if napi is already scheduled. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: avoid calling napi_disable() twiceLijun Pan
__ibmvnic_open calls napi_disable without checking whether NAPI polling has already been disabled or not. This could cause napi_disable being called twice, which could generate deadlock. For example, the first napi_disable will spin until NAPI_STATE_SCHED is cleared by napi_complete_done, then set it again. When napi_disable is called the second time, it will loop infinitely because no dev->poll will be running to clear NAPI_STATE_SCHED. To prevent above scenario from happening, call ibmvnic_napi_disable() which checks if napi is disabled or not before calling napi_disable. Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine") Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14r8169: don't advertise pause in jumbo modeHeiner Kallweit
It has been reported [0] that using pause frames in jumbo mode impacts performance. There's no available chip documentation, but vendor drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's do the same, according to Roman it fixes the issue. [0] https://bugzilla.kernel.org/show_bug.cgi?id=212617 Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause") Reported-by: Roman Mamedov <rm+bko@romanrm.net> Tested-by: Roman Mamedov <rm+bko@romanrm.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14r8169: add support for pause ethtool opsHeiner Kallweit
This adds support for the [g|s]et_pauseparam ethtool ops. It considers that the chip doesn't support pause frame use in jumbo mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2021-04-13 This series contains updates to ixgbe and ixgbevf driver. Jostar Yang adds support for BCM54616s PHY for ixgbe. Chen Lin removes an unused function pointer for ixgbe and ixgbevf. Bhaskar Chowdhury fixes a typo in ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: stmmac: Add support for external trigger timestampingTan Tee Min
The Synopsis MAC controller supports auxiliary snapshot feature that allows user to store a snapshot of the system time based on an external event. This patch add supports to the above mentioned feature. Users will be able to triggered capturing the time snapshot from user-space using application such as testptp or any other applications that uses the PTP_EXTTS_REQUEST ioctl request. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Tan Tee Min <tee.min.tan@intel.com> Co-developed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: swap 1G/10G modes on autonegIvan Bornyakov
Setting 10G without autonegotiation is invalid according to phy_ethtool_ksettings_set(). Thus, we need to set it during autonegotiation. If 1G autonegotiation can't complete for quite a time, but there is signal in line, switch line interface type to 10GBase-R, if supported, in hope for link to be established. And vice versa. If 10GBase-R link can't be established for quite a time, and autonegotiation is enabled, and there is signal in line, switch line interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if supported. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: move read_status after config_anegIvan Bornyakov
No functional changes, just move read link status routines below autonegotiation configuration to make future functional changes more distinct. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: check that link is operationalIvan Bornyakov
Some SFP modules uses RX_LOS for link indication. In such cases link will be always up, even without cable connected. RX_LOS changes will trigger link_up()/link_down() upstream operations. Thus, check that SFP link is operational before actual read link status. If there is no SFP cage connected to the tranciever, check only PMD Recieve Signal Detect register. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14mei: me: add Alder Lake P device id.Tomas Winkler
Add Alder Lake P device ID. Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210414045200.3498241-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: remove unused argument in functionFabio Aiuto
removed unused 'void *sel' argument in rtw_odm_dbg_comp_msg() function, after DBG_871X_SEL_NL replacement. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/1bd83b936584432fdb09406f26ed8a8b66cd4c8d.1618401896.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: remove DBG_871X_SEL_NL macro declarationFabio Aiuto
remove DBG_871X_SEL_NL obsolete macro declaration. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/8839231b53881c8bf1f8a4d70953ec8acaa2fe95.1618401896.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()Fabio Aiuto
replace DGB_871X_SEL_NL macro with netdev_dbg(). DBG_871X_SEL_NL macro expands to a raw prink call or a seq_printf if selected stream _is not_ a local debug symbol set to null. This second scenario never occurs so replace all macro usages with netdev_dbg(). This is done with the following coccinelle script: @@ expression sel; expression list args; identifier padapter; identifier func; @@ func(..., struct adapter *padapter, ...) { <... - DBG_871X_SEL_NL(sel, args); + netdev_dbg(padapter->pnetdev, args); ...> } fix by hand one coccinelle output newline issue Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/9d4597097d75a1900c65e4a15077eb0c8bce1c9b.1618401896.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dm verity fec: fix misaligned RS roots IOJaegeuk Kim
commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") introduced the possibility for misaligned roots IO relative to the underlying device's logical block size. E.g. Android's default RS roots=2 results in dm_bufio->block_size=1024, which causes the following EIO if the logical block size of the device is 4096, given v->data_dev_block_bits=12: E sd 0 : 0:0:0: [sda] tag#30 request not aligned to the logical block size E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5 Fix this by onlu using f->roots for dm_bufio blocksize IFF it is aligned to v->data_dev_block_bits. Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-04-14net/mlx5e: Fix RQ creation flow for queues which doesn't support XDPAya Levin
Allow to create an RQ which is not registered as an XDP RQ. For example: the trap-RQ doesn't register as an XDP RQ. Fixes: 869c5f926247 ("net/mlx5e: Generalize open RQ") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Replace spaces with tab at the start of a lineWenpeng Liang
There should be no spaces at the start of the line. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Remove return statement exist at the end of void functionWenpeng Liang
void function return statements are not generally useful. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Add a blank line after declarationsWenpeng Liang
There should be a blank lines after declarations. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Fix bit-wise and with zeroColin Ian King
The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended to be a bit-flag. Fix this by using the == operator as was originally intended. Addresses-Coverity: ("Logically dead code") Fixes: 7dfee4b1d79e ("net/mlx5: IPsec, Refactor SA handle creation and destruction") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: DR, Alloc cmd buffer with kvzalloc() instead of kzalloc()Roi Dayan
The cmd size is 8K so use kvzalloc(). Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: DR, Use variably sized data structures for different actionsJianbo Liu
mlx5dr_action is a generally used data structure, and there is an union for different types of actions in it. The size of mlx5dr_action is about 72 bytes, but for those actions with fewer fields, most of the allocated memory is wasted. Remove this union, and mlx5dr_action becomes a generic action header. Then actions are dynamically allocated with needed memory, the data for each action is stored right after the header. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: SF, Reuse stored hardware function idParav Pandit
SF's hardware function id is already stored in mlx5_sf. Reuse it, instead of querying the hw table. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: SF, Use device pointer directlyParav Pandit
At many places in the code, device pointer is directly available. Make use of it, instead of accessing it from the table. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Initialize eswitch acls ns when eswitch is enabledParav Pandit
Currently eswitch flow steering (FS) namespace of vport's ingress and egress ACL are enabled when FS layer is initialized. This is done even when eswitch is diabled. This demands that total eswitch ports to be known to FS layer without eswitch in use. Given the FS core is not dependent on eswitch, make namespace init and cleanup routines as helper routines to be invoked only when eswitch is needed. With this change, ingress and egress ACL namespaces are created only when eswitch legacy/offloads mode is enabled. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Move legacy code to a individual fileParav Pandit
Currently eswitch offers two modes. Legacy and offloads. Offloads code is already in its own file eswitch_offloads.c However eswitch.c contains the eswitch legacy code and common infrastructure code. To enable future extensions and to better manage generic common eswitch infrastructure code, move the legacy code to its own legacy.c file. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Convert a macro to a helper routineParav Pandit
Convert ESW_ALLOWED macro to a helper routine so that it can be used in other eswitch files. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch Make cleanup sequence mirror of initParav Pandit
Make cleanup sequence mirror of init sequence for cleaning up reps and freeing vports. Also when reps initialization fails, there is no need to perform reps cleanup. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Make vport number u16Parav Pandit
Vport number is 16-bit field in hardware. Make it u16. Move location of vport in the structure so that it reduces a hole in the structure. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Skip querying SF enabled bitsParav Pandit
With vhca events, SF state is queried through the VHCA events. Device no longer expects SF bitmap in the query eswitch functions command. Hence, remove it to simplify the code. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, let user to enable disable metadataParav Pandit
Currently each packet inserted in eswitch is tagged with a internal metadata to indicate source vport. Metadata tagging is not always needed. Metadata insertion is needed for multi-port RoCE, failover between representors and stacked devices. In many other cases, metadata enablement is not needed. Metadata insertion slows down the packet processing rate of the E-switch when it is in switchdev mode. Below table show performance gain with metadata disabled for VXLAN offload rules in both SMFS and DMFS steering mode on ConnectX-5 device. ---------------------------------------------- | steering | metadata | pkt size | rx pps | | mode | | | (million) | ---------------------------------------------- | smfs | disabled | 128Bytes | 42 | ---------------------------------------------- | smfs | enabled | 128Bytes | 36 | ---------------------------------------------- | dmfs | disabled | 128Bytes | 42 | ---------------------------------------------- | dmfs | enabled | 128Bytes | 36 | ---------------------------------------------- Hence, allow user to disable metadata using driver specific devlink parameter. Metadata setting of the eswitch is applicable only for the switchdev mode. Example to show and disable metadata before changing eswitch mode: $ devlink dev param show pci/0000:06:00.0 name esw_port_metadata pci/0000:06:00.0: name esw_port_metadata type driver-specific values: cmode runtime value true $ devlink dev param set pci/0000:06:00.0 \ name esw_port_metadata value false cmode runtime $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- changelog: v1->v2: - added performance numbers in commit log - updated commit log and documentation for switchdev mode - added explicit note on when user can disable metadata in documentation
2021-04-14vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommuKeqian Zhu
pinned_page_dirty_scope is optimized out by commit 010321565a7d ("vfio/iommu_type1: Mantain a counter for non_pinned_groups"), but appears again due to some issues during merging branches. We can safely remove it here. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20210412024415.30676-1-zhukeqian1@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-04-14Merge tag 'v5.12-rc7' into driver-core-nextGreg Kroah-Hartman
We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14Merge tag 'dmaengine-fix-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of dmaengine driver fixes for: - race and descriptor issue for xilinx driver - fix interrupt handling, wq state & cleanup, field sizes for completion, msix permissions for idxd driver - runtime pm fix for tegra driver - double free fix in dma_async_device_register" * tag 'dmaengine-fix-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: idxd: fix wq cleanup of WQCFG registers dmaengine: idxd: clear MSIX permission entry on shutdown dmaengine: plx_dma: add a missing put_device() on error path dmaengine: tegra20: Fix runtime PM imbalance on error dmaengine: Fix a double free in dma_async_device_register dmaengine: dw: Make it dependent to HAS_IOMEM dmaengine: idxd: fix wq size store permission state dmaengine: idxd: fix opcap sysfs attribute output dmaengine: idxd: fix delta_rec and crc size field for completion record dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback dmaengine: xilinx: dpdma: Fix race condition in done IRQ dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
2021-04-14Merge tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fix from Alex Williamson: "Verify mmap region within range (Christian A. Ehrhardt)" * tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfio: vfio/pci: Add missing range check in vfio_pci_mmap
2021-04-14Drivers: hv: vmbus: remove unused functionJiapeng Chong
Fix the following clang warning: drivers/hv/ring_buffer.c:89:1: warning: unused function 'hv_set_next_read_location' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618381282-119135-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-14Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"Timon Baetz
This reverts commit 9c03008da125c1007919a9186628af3cc105f526. commit 41a8a027f4d3 ("regulator: dt-bindings: Document charger-supply for max8997") introduced a binding which uses a property of the max8997 pmic node to configure charger supply, making subnodes for MFD cells obsolete. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14i2c: designware: Get rid of legacy platform dataAndy Shevchenko
Platform data is a legacy interface to supply device properties to the driver. In this case we don't have anymore in-kernel users for it. Just remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Convert I²C to use software nodesAndy Shevchenko
The driver can provide a software node group instead of passing legacy platform data. This will allow to drop the legacy platform data structures along with unifying a child device driver to use same interface for all property providers, i.e. Device Tree, ACPI, and board files. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"Andy Shevchenko
The IRQ support for SCH GPIO is not specific to the Intel Quark SoC. Moreover the IRQ routing is quite interesting there, so while it's needs a special support, the driver haven't it anyway yet. Due to above remove basically redundant code of IRQ support. This reverts commit ec689a8a8155ce8b966bd5d7737a3916f5e48be3. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: arizona: Fix rumtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() will increase the rumtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: core: Use acpi_find_child_device() for child devices lookupAndy Shevchenko
Use acpi_find_child_device() for child devices lookup in mfd_acpi_add_device() instead of open coded approach. No functional change intended. While at it, amend a note comment, since usage of _ADR is found on other platforms and tables than Intel Galileo Gen 2, in particular USB wired devices are using it, according to Microsoft specifications for embedded platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Don't play dirty trick with constAndy Shevchenko
As Linus rightfully noticed, the driver plays dirty trick with const, i.e. it assigns a place holder data structure to the const field in the MFD cell and then drops the const by explicit casting. This is not how it should be. Assign local pointers of the cell and resource to the respective non-const place holders in the intel_quark_i2c_setup() and intel_quark_gpio_setup(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Enable MSI interruptAndy Shevchenko
Allow interrupts to be MSI if supported by hardware. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexingAndy Shevchenko
It's convenient and less error prone to use definitions to address different cells in an array. For this purpose we may reuse existing BAR definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: ntxec: Support for EC in Tolino Shine 2 HDAndreas Kemnade
Add the version of the EC in the Tolino Shine 2 HD to the supported versions. It seems not to have an RTC and does not ack data written to it. The vendor kernel happily ignores write errors, using I2C via userspace i2c-set also shows the error. So add a quirk to ignore that error. PWM can be successfully configured despite of that error. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: stm32-timers: Avoid clearing auto reload registerFabrice Gasnier
The ARR register is cleared unconditionally upon probing, after the maximum value has been read. This initial condition is rather not intuitive, when considering the counter child driver. It rather expects the maximum value by default: - The counter interface shows a zero value by default for 'ceiling' attribute. - Enabling the counter without any prior configuration makes it doesn't count. The reset value of ARR register is the maximum. So Choice here is to backup it, and restore it then, instead of clearing its value. It also fixes the initial condition seen by the counter driver. Fixes: d0f949e220fd ("mfd: Add STM32 Timers driver") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitionsAndy Shevchenko
I²C header provides a descriptive definitions for standard bus speeds. Use them instead of plain numbers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Remove unused struct device memberAndy Shevchenko
The device pointer in the custom structure is not used anywhere, remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-17 00:47:40 +0000