| Age | Commit message (Collapse) | Author |
|---|
|
Commit c3963bc0a0cf ("hwmon: (nct6775) Split core and platform
driver") introduced a slight change in nct6775_suspend() in order to
avoid an otherwise-needless symbol export for nct6775_update_device(),
replacing a call to that function with a simple dev_get_drvdata()
instead.
As it turns out, there is no guarantee that nct6775_update_device()
is ever called prior to suspend. If this happens, the resume function
ends up writing bad data into the various chip registers, which results
in a crash shortly after resume.
To fix the problem, just add the symbol export and return to using
nct6775_update_device() as was employed previously.
Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Tested-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Fixes: c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver")
Cc: stable@kernel.org
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220810052646.13825-1-zev@bewilderbeest.net
[groeck: Updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In my test, balance-alb bonding with two slaves eth0 and eth1,
and then Bond0.150 is created with vlan id attached bond0.
After adding bond0.150 into one linux bridge, I noted that Bond0,
bond0.150 and bridge were assigned to the same MAC as eth0.
Once bond0.150 receives a packet whose dest IP is bridge's
and dest MAC is eth1's, the linux bridge will not match
eth1's MAC entry in FDB, and not handle it as expected.
The patch fix the issue, and diagram as below:
eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac)
|
bond0.150(mac:eth0_mac)
|
bridge(ip:br_ip, mac:eth0_mac)--other port
Suggested-by: Hu Yadi <huyd12@chinatelecom.cn>
Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and
InOctetsDecrypted were incrementing by the total number of octets in frames
instead of by the number of octets of User Data in frames.
The Controlled Port statistics ifOutOctets and ifInOctets were incrementing
by the total number of octets instead of the number of octets of the MSDUs
plus octets of the destination and source MAC addresses.
The Controlled Port statistics ifInDiscards and ifInErrors were not
incrementing each time the counters they aggregate were.
The Controlled Port statistic ifInErrors was not included in the output of
macsec_get_stats64 so the value was not present in ip commands output.
The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA
were not incrementing.
Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 36a15e1cb134c0395261ba1940762703f778438c.
The usage of FLAG_SEND_ZLP causes problems to other firmware/hardware
versions that have no issues.
The FLAG_SEND_ZLP is not safe to use in this context.
See:
https://patchwork.ozlabs.org/project/netdev/patch/1270599787.8900.8.camel@Linuxdev4-laptop/#118378
The original problem needs another way to solve.
Fixes: 36a15e1cb134 ("net: usb: ax88179_178a needs FLAG_SEND_ZLP")
Cc: stable@vger.kernel.org
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216327
Link: https://bugs.archlinux.org/task/75491
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
this is a pull request of 4 patches for net/master, with the
whitespace issue fixed.
Fedor Pchelkin contributes 2 fixes for the j1939 CAN protocol.
A patch by me for the ems_usb driver fixes an unaligned access
warning.
Sebastian Würl's patch for the mcp251x driver fixes a race condition
in the receive interrupt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lm90_detect_nuvoton() is supposed to return NULL if it can not detect
a chip, or a pointer to the chip name if it does. Under some circumstances
it returns an error pointer instead. Some versions of gcc interpret an
ERR_PTR as region of size 0 and generate an error message.
In function ‘__fortify_strlen’,
inlined from ‘strlcpy’ at ./include/linux/fortify-string.h:159:10,
inlined from ‘lm90_detect’ at drivers/hwmon/lm90.c:2550:2:
./include/linux/fortify-string.h:50:33: error:
‘__builtin_strlen’ reading 1 or more bytes from a region of size 0
50 | #define __underlying_strlen __builtin_strlen
| ^
./include/linux/fortify-string.h:141:24: note:
in expansion of macro ‘__underlying_strlen’
141 | return __underlying_strlen(p);
| ^~~~~~~~~~~~~~~~~~~
Returning NULL instead of ERR_PTR() fixes the problem.
Fixes: c7cebce984a2 ("hwmon: (lm90) Rework detect function")
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: ce99f6b97fcd ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 3a56f86f1be6 ("geneve: handle ipv6 priority like ipv4 tos")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current code retrieves the TOS field after the lookup
on the ipv4 routing table. The routing process currently
only allows routing based on the original 3 TOS bits, and
not on the full 6 DSCP bits.
As a result the retrieved TOS is cut to the 3 bits.
However for inheriting purposes the full 6 bits should be used.
Extract the full 6 bits before the route lookup and use
that instead of the cut off 3 TOS bits.
Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.
[ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[ 97.937611] Workqueue: events_unbound async_run_entry_fn
[ 97.937616] Call Trace:
[ 97.937617] <TASK>
[ 97.937619] dump_stack_lvl+0x49/0x63
[ 97.937624] dump_stack+0x10/0x16
[ 97.937626] ubsan_epilogue+0x9/0x3f
[ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 97.937629] ? __scm_send+0x348/0x440
[ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic]
[ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic]
[ 97.937644] aq_suspend_common+0x88/0x90 [atlantic]
[ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[ 97.937653] pci_pm_suspend+0x7e/0x1a0
[ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0
[ 97.937657] dpm_run_callback+0x54/0x190
[ 97.937660] __device_suspend+0x14c/0x4d0
[ 97.937661] async_suspend+0x23/0x70
[ 97.937663] async_run_entry_fn+0x33/0x120
[ 97.937664] process_one_work+0x21f/0x3f0
[ 97.937666] worker_thread+0x4a/0x3c0
[ 97.937668] ? process_one_work+0x3f0/0x3f0
[ 97.937669] kthread+0xf0/0x120
[ 97.937671] ? kthread_complete_and_exit+0x20/0x20
[ 97.937672] ret_from_fork+0x22/0x30
[ 97.937676] </TASK>
v2. fixed "warning: variable 'aq_vec' set but not used"
v3. simplified a for loop
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mcp251x driver uses both receiving mailboxes of the CAN controller
chips. For retrieving the CAN frames from the controller via SPI, it checks
once per interrupt which mailboxes have been filled and will retrieve the
messages accordingly.
This introduces a race condition, as another CAN frame can enter mailbox 1
while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until
the interrupt handler is called next, mailbox 0 is emptied before
mailbox 1, leading to out-of-order CAN frames in the network device.
This is fixed by checking the interrupt flags once again after freeing
mailbox 0, to correctly also empty mailbox 1 before leaving the handler.
For reproducing the bug I created the following setup:
- Two CAN devices, one Raspberry Pi with MCP2515, the other can be any.
- Setup CAN to 1 MHz
- Spam bursts of 5 CAN-messages with increasing CAN-ids
- Continue sending the bursts while sleeping a second between the bursts
- Check on the RPi whether the received messages have increasing CAN-ids
- Without this patch, every burst of messages will contain a flipped pair
v3: https://lore.kernel.org/all/20220804075914.67569-1-sebastian.wuerl@ororatech.com
v2: https://lore.kernel.org/all/20220804064803.63157-1-sebastian.wuerl@ororatech.com
v1: https://lore.kernel.org/all/20220803153300.58732-1-sebastian.wuerl@ororatech.com
Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com>
Link: https://lore.kernel.org/all/20220804081411.68567-1-sebastian.wuerl@ororatech.com
[mkl: reduce scope of intf1, eflag1]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
WARNING: suspicious RCU usage
5.2.0-rc2-00605-g2638eb8b50cfc #1 Not tainted
drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage!
plip_open is called with RTNL held, switch to the correct helper.
Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On one of our machines we got:
kernel BUG at lib/dynamic_queue_limits.c:27!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1
Hardware name: BRCM XGS iProc
task: ee3415c0 task.stack: ee32a000
PC is at dql_completed+0x168/0x178
LR is at bgmac_poll+0x18c/0x6d8
pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313
sp : ee32be14 ip : 000005ea fp : 00000bd4
r10: ee558500 r9 : c0116298 r8 : 00000002
r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851
r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 12c5387d Table: 8e88c04a DAC: 00000051
Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210)
Stack: (0xee32be14 to 0xee32c000)
be00: ee558520 ee52c100 ef128810
be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040
be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040
be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a
be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98
bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8
bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000
bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520
bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900
bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c
bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28
bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70
bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000
bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8)
[<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494)
[<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c)
[<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98)
[<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98)
[<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0)
[<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158)
[<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24)
Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7)
The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG
trigered by wrong bytes_compl") and potentially introduced by commit
b38c83dd0866 ("bgmac: simplify tx ring index handling").
If there is an RX interrupt between setting ring->end
and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free()
can miscalculate the queue size while called from bgmac_poll().
The machine which triggered the BUG runs a v4.14 RT kernel - but the issue
seems present in mainline too.
Fixes: b38c83dd0866 ("bgmac: simplify tx ring index handling")
Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The way in which dsa_tree_change_tag_proto() works is that when
dsa_tree_notify() fails, it doesn't know whether the operation failed
mid way in a multi-switch tree, or it failed for a single-switch tree.
So even though drivers need to fail cleanly in
ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify()
again, to restore the old tag protocol for potential switches in the
tree where the change did succeeed (before failing for others).
This means for the felix driver that if we report an error in
felix_change_tag_protocol(), we'll get another call where proto_ops ==
old_proto_ops. If we proceed to act upon that, we may do unexpected
things. For example, we will call dsa_tag_8021q_register() twice in a
row, without any dsa_tag_8021q_unregister() in between. Then we will
actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown,
which (if it manages to run at all, after walking through corrupted data
structures) will leave the ports inoperational anyway.
The bug can be readily reproduced if we force an error while in
tag_8021q mode; this crashes the kernel.
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014
Call trace:
vcap_entry_get+0x24/0x124
ocelot_vcap_filter_del+0x198/0x270
felix_tag_8021q_vlan_del+0xd4/0x21c
dsa_switch_tag_8021q_vlan_del+0x168/0x2cc
dsa_switch_event+0x68/0x1170
dsa_tree_notify+0x14/0x34
dsa_port_tag_8021q_vlan_del+0x84/0x110
dsa_tag_8021q_unregister+0x15c/0x1c0
felix_tag_8021q_teardown+0x16c/0x180
felix_change_tag_protocol+0x1bc/0x230
dsa_switch_event+0x14c/0x1170
dsa_tree_change_tag_proto+0x118/0x1c0
Fixes: 7a29d220f4c0 ("net: dsa: felix: reimplement tagging protocol change with function pointers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808125127.3344094-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.0
First set of fixes for v6.0. Small one this time, fix a cfg80211
warning seen with brcmfmac and remove an unncessary inline keyword
from wilc1000.
* tag 'wireless-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wilc1000: fix spurious inline in wilc_handle_disconnect()
wifi: cfg80211: Fix validating BSS pointers in __cfg80211_connect_result
====================
Link: https://lore.kernel.org/r/20220809164756.B1DAEC433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
buf.pointer, memory for storing _DSD data and nodes, was released if either
parsing properties or, as recently added, attaching data node tags failed.
Alas, properties were still left pointing to this memory if parsing
properties were successful but attaching data node tags failed.
Fix this by separating error handling for the two, and leaving properties
intact if data nodes cannot be tagged for a reason or another.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Drop unrelated white space change ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
clang emits a -Wunaligned-access warning on struct __packed
ems_cpc_msg.
The reason is that the anonymous union msg (not declared as packed) is
being packed right after some non naturally aligned variables (3*8
bits + 2*32) inside a packed struct:
| struct __packed ems_cpc_msg {
| u8 type; /* type of message */
| u8 length; /* length of data within union 'msg' */
| u8 msgid; /* confirmation handle */
| __le32 ts_sec; /* timestamp in seconds */
| __le32 ts_nsec; /* timestamp in nano seconds */
| /* ^ not naturally aligned */
|
| union {
| /* ^ not declared as packed */
| u8 generic[64];
| struct cpc_can_msg can_msg;
| struct cpc_can_params can_params;
| struct cpc_confirm confirmation;
| struct cpc_overrun overrun;
| struct cpc_can_error error;
| struct cpc_can_err_counter err_counter;
| u8 can_state;
| } msg;
| };
Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].
Fix the warning by marking the anonymous union as packed.
[1] https://github.com/llvm/llvm-project/issues/55520
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/all/20220802094021.959858-1-mkl@pengutronix.de
Cc: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since
commit e6e771b3d897 ("s390/qeth: detach netdevice while card is offline")
there was a timing window during recovery, that qeth_query_card_info could
be sent to the card, even before it was ready for it, leading to a failing
card recovery. There is evidence that this window was hit, as not all
callers of get_link_ksettings() check for netif_device_present.
Use cached values in qeth_get_link_ksettings(), instead of calling
qeth_query_card_info() and falling back to default values in case it
fails. Link info is already updated when the card goes online, e.g. after
STARTLAN (physical link up). Set the link info to default values, when the
card goes offline or at STOPLAN (physical link down). A follow-on patch
will improve values reported for link down.
Fixes: e6e771b3d897 ("s390/qeth: detach netdevice while card is offline")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20220805155714.59609-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get
functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem
cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl"
is completely missing in Device Tree and we should use default values.
Check -EOPNOTSUPP togather with -ENOENT to avoid this situation.
Fixes: 5c2d0a6a0701 ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805084843.24542-1-nikita.shubin@maquefel.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
specified
In case master/slave clock role is not specified (which is default), the
aneg registers will not be written.
The visible impact of this is missing pause advertisement.
So, rework genphy_c45_baset1_an_config_aneg() to be able to write
advertisement registers even if clock role is unknown.
Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are use-after-free bugs caused by tst_timer. The root cause
is that there are no functions to stop tst_timer in idt77252_exit().
One of the possible race conditions is shown below:
(thread 1) | (thread 2)
| idt77252_init_one
| init_card
| fill_tst
| mod_timer(&card->tst_timer, ...)
idt77252_exit | (wait a time)
| tst_timer
|
| ...
kfree(card) // FREE |
| card->soft_tst[e] // USE
The idt77252_dev is deallocated in idt77252_exit() and used in
timer handler.
This patch adds del_timer_sync() in idt77252_exit() in order that
the timer handler could be stopped before the idt77252_dev is
deallocated.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
closed
min_gate_len[tc] is supposed to track the shortest interval of
continuously open gates for a traffic class. For example, in the
following case:
TC 76543210
t0 00000001b 200000 ns
t1 00000010b 200000 ns
min_gate_len[0] and min_gate_len[1] should be 200000, while
min_gate_len[2-7] should be 0.
However what happens is that min_gate_len[0] is 200000, but
min_gate_len[1] ends up being 0 (despite gate_len[1] being 200000 at the
point where the logic detects the gate close event for TC 1).
The problem is that the code considers a "gate close" event whenever it
sees that there is a 0 for that TC (essentially it's level rather than
edge triggered). By doing that, any time a gate is seen as closed
without having been open prior, gate_len, which is 0, will be written
into min_gate_len. Once min_gate_len becomes 0, it's impossible for it
to track anything higher than that (the length of actually open
intervals).
To fix this, we make the writing to min_gate_len[tc] be edge-triggered,
which avoids writes for gates that are closed in consecutive intervals.
However what this does is it makes us need to special-case the
permanently closed gates at the end.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220804202817.1677572-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write
index like tsnep_tx_map(). This is different to the normal operation.
Thus, add an additional parameter to tsnep_tx_unmap() to enable start at
different positions for successful TX and failed TX.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kernel test robot found the following warning:
drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning:
'tsnep_of_match' defined but not used [-Wunused-const-variable=]
of_match_ptr() compiles into NULL if CONFIG_OF is disabled.
tsnep_of_match exists always so use of of_match_ptr() is useless.
Fix warning by dropping of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
|
|
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and
a possible race condition in the rpmsg_char driver is resolved"
* tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: convert sysfs snprintf to sysfs_emit
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
rpmsg: qcom: correct kerneldoc
rpmsg: qcom: glink: remove unused name
rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
rpmsg: Strcpy is not safe, use strscpy_pad() instead
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg: Fix parameter naming for announce_create/destroy ops
rpmsg: mtk_rpmsg: Fix circular locking dependency
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add RTL9310 support
- sp805_wdt: add arm cmsdk apb wdt support
- Remove #ifdef guards for PM related functions for several watchdog
device drivers
- pm8916_wdt reboot improvements
- Several other fixes and improvements
* tag 'linux-watchdog-5.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()
watchdog: dw_wdt: Fix comment typo
watchdog: Fix comment typo
dt-bindings: watchdog: Add fsl,scu-wdt yaml file
watchdog:Fix typo in comment
watchdog: pm8916_wdt: Handle watchdog enabled by bootloader
watchdog: pm8916_wdt: Report reboot reason
watchdog: pm8916_wdt: Avoid read of write-only PET register
watchdog: wdat_wdt: Remove #ifdef guards for PM related functions
watchdog: tegra_wdt: Remove #ifdef guards for PM related functions
watchdog: st_lpc_wdt: Remove #ifdef guards for PM related functions
watchdog: sama5d4_wdt: Remove #ifdef guards for PM related functions
watchdog: s3c2410_wdt: Remove #ifdef guards for PM related functions
watchdog: mtk_wdt: Remove #ifdef guards for PM related functions
watchdog: dw_wdt: Remove #ifdef guards for PM related functions
watchdog: bcm7038_wdt: Remove #ifdef guards for PM related functions
watchdog: realtek-otto: add RTL9310 support
dt-bindings: watchdog: realtek,otto-wdt: add RTL9310
watchdog: sp805_wdt: add arm cmsdk apb wdt support
watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix an error code path issue leading to a NULL pointer
dereference, drop Kconfig dependencies that are not needed any more
after recent changes, add CPU IDs for new chips to a driver and fix up
the tmon utility.
Specifics:
- Fix NULL pointer dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Make the Intel TCC cooling driver support Alder Lake-N and Raptor
Lake-P (Sumeet Pawnikar).
- Fix possible path truncations in the tmon utility (Florian
Fainelli)"
* tag 'thermal-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix possible path truncations
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
thermal: intel: Add TCC cooling support for Alder Lake-N and Raptor Lake-P
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"A new driver for bcm63138, is31fl319x updates, fixups for multicolor.
The clevo-mail driver got disabled, it needs an API fix"
* tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits)
leds: is31fl319x: use simple i2c probe function
leds: is31fl319x: Fix devm vs. non-devm ordering
leds: is31fl319x: Make use of dev_err_probe()
leds: is31fl319x: Make use of device properties
leds: is31fl319x: Cleanup formatting and dev_dbg calls
leds: is31fl319x: Add support for is31fl319{0,1,3} chips
leds: is31fl319x: Move chipset-specific values in chipdef struct
leds: is31fl319x: Use non-wildcard names for vars, structs and defines
leds: is31fl319x: Add missing si-en compatibles
dt-bindings: leds: pwm-multicolor: document max-brigthness
leds: turris-omnia: convert to use dev_groups
leds: leds-bcm63138: get rid of LED_OFF
leds: add help info about BCM63138 module name
dt-bindings: leds: leds-bcm63138: unify full stops in descriptions
dt-bindings: leds: lp50xx: fix LED children names
dt-bindings: leds: class-multicolor: reference class directly in multi-led node
leds: bcm63138: add support for BCM63138 controller
dt-bindings: leds: add Broadcom's BCM63138 controller
leds: clevo-mail: Mark as broken pending interface fix
leds: pwm-multicolor: Support active-low LEDs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
|
|
Merge additional changes in the thermal core and thermal tools updates
for 5.20-rc1:
- Fix NULL poiter dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Fix possible path truncations in the tmon utility (Florian Fainelli).
* thermal-core:
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
* thermal-tools:
tools/thermal: Fix possible path truncations
|
|
Merge ARM cpufreq updates for 5.20-rc1.
* pm-cpufreq:
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
|
|
Merge operating performance points (OPP) updates for 5.20-rc1.
* pm-opp: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
|
|
In order to make the underneath API easier to change in the future,
prevent users from dereferencing fwnode from struct device.
Instead, use the specific dev_fwnode() and device_match_fwnode()
APIs for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This removes the need for representing the Qualcomm SFPB mutex using
an intermediate syscon node and it clean up the pm_runtime_get_sync()
usage in the OMAP hwspinlock driver"
* tag 'hwlock-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: Add support for mmio usage to sfpb-mutex
hwspinlock: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mtk:
- use rx_callback instead of cmdq_task_cb
- qcom:
- add syscon const
- add SM6375 compatible
- imx:
- enable RST channel
- clear pending irqs
* tag 'mailbox-v5.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: imx: clear pending interrupts
dt-bindings: mailbox: qcom-ipcc: Add SM6375 compatible
mailbox: imx: support RST channel
dt-bindings: mailbox: imx-mu: add RST channel
dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries
mailbox: mtk-cmdq: Remove proprietary cmdq_task_cb
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"A few miscellaneous patches. There is no large patch series for this
merge window"
* tag 'hyperv-next-signed-20220807' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Create debugfs file with hyper-v balloon usage information
drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()
Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended
|
|
devm_regulator_get_optional() API will return -ENODEV if the regulator was
not found. For the optional supplies CX, PX we should not fail in that case
but rather continue. So let's catch that error and continue silently if
those regulators are not found.
The commit 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with
optional px and cx regulators") was supposed to do the same but it missed
the fact that devm_regulator_get_optional() API returns -ENODEV when the
regulator was not found.
Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220801053939.12556-1-manivannan.sadhasivam@linaro.org
|
|
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns
NULL, we should check if xdp_page was allocated by xdp_linearize_page().
If it is newly allocated, it should be freed here alone. Just like any
other "goto err_xdp".
Fixes: 44fa2dbd4759 ("xdp: transition into using xdp_frame for ndo_xdp_xmit")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sparse warns:
drivers/net/wireless/microchip/wilc1000/hif.h:218:35: error: marked inline, but without a definition
Remove the inline, it's not needed.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220801110440.13144-1-kvalo@kernel.org
|
|
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The two major changes in this patchset corrects VGA modes, color
handling and various other smaller fixes in the Atari framebuffer (by
Geert Uytterhoeven), and devm_* conversion, platform data fixes and
header cleanups in the imxfb driver (by Uwe Kleine-König).
Other small patches clean up code in sa1100fb, cirrusfb and omapfb,
fix a refcount leak in amba-clcd (by Liang He), and adds parameter
checks to arkfb, i740fb, vt8623fb and s3fb (by Zheyu Ma)"
* tag 'for-5.20/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (27 commits)
video: fbdev: s3fb: Check the size of screen before memset_io()
video: fbdev: arkfb: Check the size of screen before memset_io()
video: fbdev: vt8623fb: Check the size of screen before memset_io()
video: fbdev: i740fb: Check the argument of i740_calc_vclk()
video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
video: fbdev: imxfb: fix return value check in imxfb_probe()
video: fbdev: sis: fix typos in SiS_GetModeID()
video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource
video: fbdev: imxfb: Fold <linux/platform_data/video-imxfb.h> into only user
video: fbdev: imxfb: Drop unused symbols from header
video: fbdev: imxfb: Drop platform data support
video: fbdev: amba-clcd: Fix refcount leak bugs
video: fbdev: omapfb: Unexport omap*_update_window_async()
video: fbdev: atari: Remove backward bug-compatibility
video: fbdev: atari: Remove unused definitions and variables
video: fbdev: atari: Fix VGA modes
video: fbdev: atari: Fix TT High video mode vertical refresh
video: fbdev: atari: Remove unneeded casts to void *
video: fbdev: atari: Remove unneeded casts from void *
video: fbdev: atari: Fix ext_setcolreg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes a few prerequisite updates and fixes to the oldmem
reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities, but
also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
test.
- Fix incorrect recovery of kretprobe modified return address in
stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as
well as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
Revert "s390/smp: enforce lowcore protection on CPU restart"
Revert "s390/smp: rework absolute lowcore access"
Revert "s390/smp,ptdump: add absolute lowcore markers"
s390/unwind: fix fgraph return address recovery
s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
s390: add ELF note type for encrypted CPU state of a PV VCPU
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/setup: rearrange absolute lowcore initialization
s390/boot: cleanup adjust_to_uv_max() function
s390/smp: enforce lowcore protection on CPU restart
s390/tape: fix comment typo
s390/hmcdrv: fix Kconfig "its" grammar
s390/docs: fix warnings for vfio_ap driver doc
s390/docs: fix warnings for vfio_ap driver lock usage doc
s390/crash: support multi-segment iterators
s390/crash: use static swap buffer for copy_to_user_real()
s390/crash: move copy_to_user_real() to crash_dump.c
s390/zcore: fix race when reading from hardware system area
s390/crash: fix incorrect number of bytes to copy to user space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
|
|
This reverts commit 4bf7fda4dce22214c70c49960b1b6438e6260b67.
It turns out that it was hopelessly naive to think that this would work,
considering that we've always done this. The first machine I actually
tested this on broke at bootup, getting to
Reached target cryptsetup.target - Local Encrypted Volumes.
and then hanging. It's unclear what actually fails, since there's a lot
else going on around that time (eg amdgpu probing also happens around
that same time, but it could be some other random init thing that didn't
complete earlier and just caused the boot to hang at that point).
The expectations that we should default to some unsafe and untested mode
seems entirely unfounded, and the belief that this wouldn't affect
modern systems is clearly entirely false. The machine in question is
about two years old, so it's not exactly shiny, but it's also not some
dusty old museum piece PDP-11 in a closet.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
