| Age | Commit message (Collapse) | Author |
|---|
|
[WHY]
DENTIST hangs when OTG is off and encoder is on. We were not
disabling the encoder properly when switching from extended mode to
external monitor only.
[HOW]
Disable the encoder using an existing enable/disable fifo helper instead
of enc35_stream_encoder_enable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The port num info is firstly introduced with 20.00.01.13 xgmi ta and
make them as part of topology info.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On s0i3, IPS mask isn't saved and restored.
It is reset to zero on exit.
If it is cleared unexpectedly, driver will
proceed operations while DCN is in IPS2 and
cause a hang.
[HOW]
Negate the bit logic. Default value of
zero indicates it is still in IPS2. Driver
must poll for the bit to assert.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to notify about unload during reset. Also remove the FW version
check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix ras err_data null pointer issue in amdgpu_ras.c
Fixes: 8cc0f5669eb6 ("drm/amdgpu: Support multiple error query modes")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The following patch will fix a minor issue where a debug message is
referencing an struct that has just being checked whether is null or
not. This has been noticed by using coccinelle, in the following output:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced.
Fixes: 5d72e247e58c ("drm/amd/display: switch DC over to the new DRM logging macros")
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Add some null checks to fix an issue where 8k60
tiled display fails to light up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fill PCIE error counters & instantaneous bandwidth
in gpu metrics v1_4 for smu v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update pmfw metric table to include pcie
instantaneous bandwidth & pcie error counters
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The variable "chunk_ptr" should be a pointer pointing
to a struct drm_amdgpu_cs_chunk instead of to a pointer
of that.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
uvd_entity_init()'
Fixes the following:
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init'
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The valid num_mem_partitions is required during ttm pool fini,
thus move the cleanup at the end of the function.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MC_VM_AGP_* registers should not be programmed by guest driver.
v2: move early return outside of loop
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since commit a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
you can build the ism code without selecting the SMC network protocol.
That leaves some ism functions be reported as unused. Move these
functions under the conditional compile with CONFIG_SMC.
Also codify the suggestion to also configure the SMC protocol in ism's
Kconfig - but with an "imply" rather than a "select" as SMC depends on
other config options and allow for a deliberate decision not to build
SMC. Also, mention that in ISM's help.
Fixes: a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.
This follows the same logic as the DWMAC_INTEL option.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While developing and testing the commit bfcc3d8f94f4 ("drm/msm/dp:
support setting the DP subconnector type") I had the patch [1] in my
tree. I haven't noticed that it was a dependency for the commit in
question. Mea culpa.
Since the patch has not landed yet (and even was not reviewed)
and since one of the bridges erroneously uses USB connector type instead
of DP, attach the property directly from the MSM DP driver.
This fixes the following oops on DP HPD event:
drm_object_property_set_value (drivers/gpu/drm/drm_mode_object.c:288)
dp_display_process_hpd_high (drivers/gpu/drm/msm/dp/dp_display.c:402)
dp_hpd_plug_handle.isra.0 (drivers/gpu/drm/msm/dp/dp_display.c:604)
hpd_event_thread (drivers/gpu/drm/msm/dp/dp_display.c:1110)
kthread (kernel/kthread.c:388)
ret_from_fork (arch/arm64/kernel/entry.S:858)
[1] https://patchwork.freedesktop.org/patch/555530/
Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SC7280
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/564286/
Link: https://lore.kernel.org/r/20231025092711.851168-3-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
In case of the eDP connection there is no subconnetor and as such no
subconnector property. Put drm_dp_set_subconnector_property() calls
under the !is_edp condition.
Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SC7280
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/564284/
Link: https://lore.kernel.org/r/20231025092711.851168-2-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
During USB transfers on the SC8280XP __arm_smmu_tlb_sync() is seen to
typically take 1-2ms to complete. As expected this results in poor
performance, something that has been mitigated by proposing running the
iommu in non-strict mode (boot with iommu.strict=0).
This turns out to be related to the SAFE logic, and programming the QOS
SAFE values in the DPU (per suggestion from Rob and Doug) reduces the
TLB sync time to below 10us, which means significant less time spent
with interrupts disabled and a significant boost in throughput.
Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Cc: stable@vger.kernel.org
Suggested-by: Doug Anderson <dianders@chromium.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/565094/
Link: https://lore.kernel.org/r/20231030-sc8280xp-dpu-safe-lut-v1-1-6d485d7b428f@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
It seems during rebases I have left a call to drm_kms_helper_poll_init()
which is not guarded by the (priv->kms_init) check. This leads to the
crash for the boards which don't have KMS output. Drop this call, as
there is a correctly guarded one next to the one being removed.
Fixes: 506efcba3129 ("drm/msm: carve out KMS code from msm_drv.c")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/566299/
Link: https://lore.kernel.org/r/20231107111413.2212942-1-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Use the same value as the downstream driver. This change is needed for CPHY
mode to work correctly.
Fixes: 8b034e677111 ("drm/msm/dsi: add support for DSI-PHY on SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/566987/
Link: https://lore.kernel.org/r/20231110000216.29979-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The HCLK_OTG gate control is in CRU_CLKGATE5_CON, not CRU_CLKGATE3_CON.
Signed-off-by: Weihao Li <cn.liweihao@gmail.com>
Link: https://lore.kernel.org/r/20231031111816.8777-1-cn.liweihao@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel
can run at a requested 60hz (59.96, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
MIPS appears to define a RST symbol at a high level, which clashes
with some register naming in the driver. Since there is currently
no case for running this driver on MIPS devices simply cut off the
build of this driver on MIPS.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Laurent Pinchart says:
----------------------------------------------------------------
Renesas R-Car VSP1 driver regression fix
----------------------------------------------------------------
Laurent Pinchart (1):
media: vsp1: Remove unbalanced .s_stream(0) calls
Link: https://lore.kernel.org/linux-media/20231113020054.GA18039@pendragon.ideasonboard.com/
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This driver fails to build when HAVE_CLK and COMMON_CLK are disabled:
x86_64-linux-ld: vmlinux.o: in function `mgb4_remove':
mgb4_core.c:(.text+0x1915e8c): undefined reference to `clkdev_drop'
x86_64-linux-ld: mgb4_core.c:(.text+0x1915e98): undefined reference to `clk_hw_unregister'
Add a Kconfig dependency to enforce a clean build.
Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
T200 card variants use the XC7A200T FPGA instead of XC7A100T. The SPI FLASH
memory layout is different as the FPGA requires bigger FW images.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A fix in the Xen events driver avoiding the use of RCU after
the call to rcu_report_dead() when taking a cpu down
- A fix for running as Xen dom0 to line up ACPI's idea of power
management capabilities with the one of Xen
- A cleanup eliminating several kernel-doc warnings in Xen related
code
- A cleanup series of the Xen events driver
* tag 'for-linus-6.7a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: remove some info_for_irq() calls in pirq handling
xen/events: modify internal [un]bind interfaces
xen/events: drop xen_allocate_irqs_dynamic()
xen/events: remove some simple helpers from events_base.c
xen/events: reduce externally visible helper functions
xen/events: remove unused functions
xen/events: fix delayed eoi list handling
xen/shbuf: eliminate 17 kernel-doc warnings
acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0
xen/events: avoid using info_for_irq() in xen_send_IPI_one()
|
|
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
|
|
When the node for this phy selector is a child node of a syscon node then the
property 'reg' is used as an offset into the parent regmap. When the node
is standalone and gets its own regmap this offset is pre-applied. So we need
to track which method was used to get the regmap and not apply the offset
in the standalone case.
Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In smb_reset_buffer, the sdb->buf_hw_base variable is uninitialized
before use, which initializes it in smb_init_data_buffer. And the SMB
regiester are set in smb_config_inport.
So move the call after smb_config_inport.
Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-4-hejunhao3@huawei.com
|
|
The SMB dirver register the enable/disable sysfs interface in function
smb_register_sink(), however the buffer depends on the following
configuration to work well. So it'll be possible for user to access an
unreset one.
Move the config buffer operation to before register_sink().
Ignore the return value, if smb_config_inport() fails. That will
cause the hardwares disable trace path to fail, should not affect
SMB driver remove. So we make smb_remove() return success,
Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-3-hejunhao3@huawei.com
|
|
When we to enable the SMB by perf, the perf sched will call perf_ctx_lock()
to close system preempt in event_function_call(). But SMB::enable_smb() use
mutex to lock the critical section, which may sleep.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 153023, name: perf
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
softirqs last enabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 2 PID: 153023 Comm: perf Kdump: loaded Tainted: G W O 6.5.0-rc4+ #1
Call trace:
...
__mutex_lock+0xbc/0xa70
mutex_lock_nested+0x34/0x48
smb_update_buffer+0x58/0x360 [ultrasoc_smb]
etm_event_stop+0x204/0x2d8 [coresight]
etm_event_del+0x1c/0x30 [coresight]
event_sched_out+0x17c/0x3b8
group_sched_out.part.0+0x5c/0x208
__perf_event_disable+0x15c/0x210
event_function+0xe0/0x230
remote_function+0xb4/0xe8
generic_exec_single+0x160/0x268
smp_call_function_single+0x20c/0x2a0
event_function_call+0x20c/0x220
_perf_event_disable+0x5c/0x90
perf_event_for_each_child+0x58/0xc0
_perf_ioctl+0x34c/0x1250
perf_ioctl+0x64/0x98
...
Use spinlock to replace mutex to control driver data access to one at a
time. The function copy_to_user() may sleep, it cannot be in a spinlock
context, so we can't simply replace it in smb_read(). But we can ensure
that only one user gets the SMB device fd by smb_open(), so remove the
locks from smb_read() and buffer synchronization is guaranteed by the user.
Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-2-hejunhao3@huawei.com
|
|
Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.
[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up
[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.
Fixes: efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
representors
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 521f31af004a ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: ada9f5d00797 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.
Log:
mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04
Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the skb is available in metadata mapping to skbs before tracking the
metadata index for detecting undelivered CQEs. If the metadata index is put
in the tracking list before putting the skb in the map, the metadata index
might be used for detecting undelivered CQEs before the relevant skb is
available in the map, which can lead to a null-ptr-deref.
Log:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mlx5e_rx_dim_work [mlx5_core]
RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07
RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206
RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005
RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028
RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383
R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40
R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? die_addr+0x3c/0xa0
? exc_general_protection+0x144/0x210
? asm_exc_general_protection+0x22/0x30
? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core]
__napi_poll.constprop.0+0xa4/0x580
net_rx_action+0x460/0xb80
? _raw_spin_unlock_irqrestore+0x32/0x60
? __napi_poll.constprop.0+0x580/0x580
? tasklet_action_common.isra.0+0x2ef/0x760
__do_softirq+0x26c/0x827
irq_exit_rcu+0xc2/0x100
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:__kmem_cache_alloc_node+0xb/0x330
Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83
RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246
RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218
RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0
RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9
R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0
R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450
? cmd_exec+0x796/0x2200 [mlx5_core]
kmalloc_trace+0x26/0xc0
cmd_exec+0x796/0x2200 [mlx5_core]
mlx5_cmd_do+0x22/0xc0 [mlx5_core]
mlx5_cmd_exec+0x17/0x30 [mlx5_core]
mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core]
? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core]
? lockdep_set_lock_cmp_fn+0x190/0x190
? process_one_work+0x659/0x1220
mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core]
process_one_work+0x730/0x1220
? lockdep_hardirqs_on_prepare+0x400/0x400
? max_active_store+0xf0/0xf0
? assign_work+0x168/0x240
worker_thread+0x70f/0x12d0
? __kthread_parkme+0xd1/0x1d0
? process_one_work+0x1220/0x1220
kthread+0x2d9/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse
---[ end trace 0000000000000000 ]---
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_sq_xmit_wqe
When SQ is a port timestamping SQ for PTP, do not access tx flags of skb
after free-ing the skb. Free the skb only after all references that depend
on it have been handled in the dropped WQE path.
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As IPSec packet offload in switchdev mode is not supported with LAG,
it's unnecessary to modify those sent-to-vport rules to the peer eswitch.
Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
