summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-09-21ieee802154: Use kmemdup instead of duplicating it in ↵YueHaibing
ca8210_test_int_driver_write Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-09-21Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-blockGreg Kroah-Hartman
Jens writes: "Storage fixes for 4.19-rc5 - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft) - NVMe pull request from Christoph, and a single ANA log page fix (Hannes) - Regression fix for libata qd32 support, where we trigger an illegal active command transition. This fixes a CD-ROM detection issue that was reported, but could also trigger premature completion of the internal tag (me)" * tag 'for-linus-20180920' of git://git.kernel.dk/linux-block: floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl libata: mask swap internal and hardware tag nvme: count all ANA groups for ANA Log page
2018-09-21Merge tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman
David writes: "drm fixes for 4.19-rc5: - core: fix debugfs for atomic, fix the check for atomic for non-modesetting drivers - amdgpu: adds a new PCI id, some kfd fixes and a sdma fix - i915: a bunch of GVT fixes. - vc4: scaling fix - vmwgfx: modesetting fixes and a old buffer eviction fix - udl: framebuffer destruction fix - sun4i: disable on R40 fix until next kernel - pl111: NULL termination on table fix" * tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9 drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 drm/vmwgfx: Fix buffer object eviction drm/vmwgfx: Don't impose STDU limits on framebuffer size drm/vmwgfx: limit mode size for all display unit to texture_max drm/vmwgfx: limit screen size to stdu_max during check_modeset drm/vmwgfx: don't check for old_crtc_state enable status drm/amdgpu: add new polaris pci id drm: sun4i: drop second PLL from A64 HDMI PHY drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers. drm/i915/gvt: clear ggtt entries when destroy vgpu drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler drm/i915/gvt: Init PHY related registers for BXT drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation drm/fb-helper: Remove set but not used variable 'connector_funcs' drm: udl: Destroy framebuffer only if it was initialized drm/sun4i: Remove R40 display pipeline compatibles drm/pl111: Make sure of_device_id tables are NULL terminated ...
2018-09-21crypto: caam/jr - fix ablkcipher_edesc pointer arithmeticHoria Geantă
In some cases the zero-length hw_desc array at the end of ablkcipher_edesc struct requires for 4B of tail padding. Due to tail padding and the way pointers to S/G table and IV are computed: edesc->sec4_sg = (void *)edesc + sizeof(struct ablkcipher_edesc) + desc_bytes; iv = (u8 *)edesc->hw_desc + desc_bytes + sec4_sg_bytes; first 4 bytes of IV are overwritten by S/G table. Update computation of pointer to S/G table to rely on offset of hw_desc member and not on sizeof() operator. Cc: <stable@vger.kernel.org> # 4.13+ Fixes: 115957bb3e59 ("crypto: caam - fix IV DMA mapping and updating") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-20r8169: fix autoneg issue on resume with RTL8168EHeiner Kallweit
It was reported that chip version 33 (RTL8168E) ends up with 10MBit/Half on a 1GBit link after resuming from S3 (with different link partners). For whatever reason the PHY on this chip doesn't properly start a renegotiation when soft-reset. Explicitly requesting a renegotiation fixes this. Fixes: a2965f12fde6 ("r8169: remove rtl8169_set_speed_xmii") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Neil MacLeod <neil@nmacleod.com> Tested-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20scsi: lpfc: Synchronize access to remoteport via rportJames Smart
The driver currently uses the ndlp to get the local rport which is then used to get the nvme transport remoteport pointer. There can be cases where a stale remoteport pointer is obtained as synchronization isn't done through the different dereferences. Correct by using locks to synchronize the dereferences. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20scsi: ufs: Disable blk-mq for nowAdrian Hunter
blk-mq does not support runtime pm, so disable blk-mq support for now. Fixes: d5038a13eca7 ("scsi: core: switch to scsi-mq by default") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20IB/hfi1: Fix destroy_qp hang after a link downMichael J. Ruhl
rvt_destroy_qp() cannot complete until all in process packets have been released from the underlying hardware. If a link down event occurs, an application can hang with a kernel stack similar to: cat /proc/<app PID>/stack quiesce_qp+0x178/0x250 [hfi1] rvt_reset_qp+0x23d/0x400 [rdmavt] rvt_destroy_qp+0x69/0x210 [rdmavt] ib_destroy_qp+0xba/0x1c0 [ib_core] nvme_rdma_destroy_queue_ib+0x46/0x80 [nvme_rdma] nvme_rdma_free_queue+0x3c/0xd0 [nvme_rdma] nvme_rdma_destroy_io_queues+0x88/0xd0 [nvme_rdma] nvme_rdma_error_recovery_work+0x52/0xf0 [nvme_rdma] process_one_work+0x17a/0x440 worker_thread+0x126/0x3c0 kthread+0xcf/0xe0 ret_from_fork+0x58/0x90 0xffffffffffffffff quiesce_qp() waits until all outstanding packets have been freed. This wait should be momentary. During a link down event, the cleanup handling does not ensure that all packets caught by the link down are flushed properly. This is caused by the fact that the freeze path and the link down event is handled the same. This is not correct. The freeze path waits until the HFI is unfrozen and then restarts PIO. A link down is not a freeze event. The link down path cannot restart the PIO until link is restored. If the PIO path is restarted before the link comes up, the application (QP) using the PIO path will hang (until link is restored). Fix by separating the linkdown path from the freeze path and use the link down path for link down events. Close a race condition sc_disable() by acquiring both the progress and release locks. Close a race condition in sc_stop() by moving the setting of the flag bits under the alloc lock. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20IB/hfi1: Fix context recovery when PBC has an UnsupportedVLMichael J. Ruhl
If a packet stream uses an UnsupportedVL (virtual lane), the send engine will not send the packet, and it will not indicate that an error has occurred. This will cause the packet stream to block. HFI has 8 virtual lanes available for packet streams. Each lane can be enabled or disabled using the UnsupportedVL mask. If a lane is disabled, adding a packet to the send context must be disallowed. The current mask for determining unsupported VLs defaults to 0 (allow all). This is incorrect. Only the VLs that are defined should be allowed. Determine which VLs are disabled (mtu == 0), and set the appropriate unsupported bit in the mask. The correct mask will allow the send engine to error on the invalid VL, and error recovery will work correctly. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20IB/hfi1: Invalid user input can result in crashMichael J. Ruhl
If the number of packets in a user sdma request does not match the actual iovectors being sent, sdma_cleanup can be called on an uninitialized request structure, resulting in a crash similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] PGD 8000001044f61067 PUD 1052706067 PMD 0 Oops: 0000 [#1] SMP CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE ------------ 3.10.0-862.el7.x86_64 #1 Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000 RIP: 0010:[<ffffffffc0ae8bb7>] [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286 RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000 RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000 RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06 R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000 R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540 FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0 Call Trace: [<ffffffffc0b0570d>] user_sdma_send_pkts+0xdcd/0x1990 [hfi1] [<ffffffff9fe75fb0>] ? gup_pud_range+0x140/0x290 [<ffffffffc0ad3105>] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1] [<ffffffffc0b0777b>] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1] [<ffffffffc0ac193a>] hfi1_aio_write+0xba/0x110 [hfi1] [<ffffffffa001a2bb>] do_sync_readv_writev+0x7b/0xd0 [<ffffffffa001bede>] do_readv_writev+0xce/0x260 [<ffffffffa022b089>] ? tty_ldisc_deref+0x19/0x20 [<ffffffffa02268c0>] ? n_tty_ioctl+0xe0/0xe0 [<ffffffffa001c105>] vfs_writev+0x35/0x60 [<ffffffffa001c2bf>] SyS_writev+0x7f/0x110 [<ffffffffa051f7d5>] system_call_fastpath+0x1c/0x21 Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4 83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02 RIP [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP <ffff8b2ed1f9bab0> CR2: 0000000000000008 There are two exit points from user_sdma_send_pkts(). One (free_tx) merely frees the slab entry and one (free_txreq) cleans the sdma_txreq prior to freeing the slab entry. The free_txreq variation can only be called after one of the sdma_init*() variations has been called. In the panic case, the slab entry had been allocated but not inited. Fix the issue by exiting through free_tx thus avoiding sdma_clean(). Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20IB/hfi1: Fix SL array bounds checkIra Weiny
The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few fixes for 4.19: - Add a new polaris pci id - KFD fixes for raven and gfx7 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920155850.5455-1-alexander.deucher@amd.com
2018-09-20RDMA/uverbs: Fix validity check for modify QPMajd Dibbiny
Uverbs shouldn't enforce QP state in the command unless the user set the QP state bit in the attribute mask. In addition, only copy qp attr fields which have the corresponding bit set in the attribute mask over to the internal attr structure. Fixes: 88de869bbe4f ("RDMA/uverbs: Ensure validity of current QP state value") Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20PCI: dwc: Fix scheduling while atomic issuesJisheng Zhang
When programming the inbound/outbound ATUs, we call usleep_range() after each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming can be executed in atomic context: inbound ATU programming could be called through pci_epc_write_header() =>dw_pcie_ep_write_header() =>dw_pcie_prog_inbound_atu() outbound ATU programming could be called through pci_bus_read_config_dword() =>dw_pcie_rd_conf() =>dw_pcie_prog_outbound_atu() Fix this issue by calling mdelay() instead. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-09-20bnxt_en: don't try to offload VLAN 'modify' actionDavide Caratti
bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20drm/i2c: tda9950: set MAX_RETRIES for errors onlyHans Verkuil
The CEC_TX_STATUS_MAX_RETRIES should be set for errors only to prevent the CEC framework from retrying the transmit. If the transmit was successful, then don't set this flag. Found by running 'cec-compliance -A' on a beaglebone box. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-20drm/i2c: tda9950: fix timeout counter checkColin Ian King
Currently the check to see if the timeout has reached zero is incorrect and the check is instead checking if the timeout is non-zero and not zero, hence it will break out of the loop on the first iteration and the msleep is never executed. Fix this by breaking from the loop when timeout is zero. Detected by CoverityScan, CID#1469404 ("Logically Dead Code") Fixes: f0316f93897c ("drm/i2c: tda9950: add CEC driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-20regulator: fix crash caused by null driver dataYu Zhao
dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-09-20drm/amdkfd: Fix ATS capablity was not reported correctly on some APUsYong Zhao
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we need to workaround this. For future compatibility, we also overwrite the bit in capability according to the value of needs_iommu_device. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9Yong Zhao
CWSR fails on Raven if the control stack is MTYPE_UC, which is used for regular GART mappings. As a workaround we map it using MTYPE_NC. The MEC firmware expects the control stack at one page offset from the start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU added a memory allocation flag just for this purpose. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7Amber Lin
A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20pinctrl: intel: Do pin translation in other GPIO operations as wellMika Westerberg
For some reason I thought GPIOLIB handles translation from GPIO ranges to pinctrl pins but it turns out not to be the case. This means that when GPIOs operations are performed for a pin controller having a custom GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets used internally. Fix this in the same way we did for lock/unlock IRQ operations and translate the GPIO number to pin before using it. Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups") Reported-by: Rajat Jain <rajatja@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Rajat Jain <rajatja@google.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fix from Christoph. * 'nvme-4.19' of git://git.infradead.org/nvme: nvme: count all ANA groups for ANA Log page
2018-09-20floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctlAndy Whitcroft
The final field of a floppy_struct is the field "name", which is a pointer to a string in kernel memory. The kernel pointer should not be copied to user memory. The FDGETPRM ioctl copies a floppy_struct to user memory, including this "name" field. This pointer cannot be used by the user and it will leak a kernel address to user-space, which will reveal the location of kernel code and data and undermine KASLR protection. Model this code after the compat ioctl which copies the returned data to a previously cleared temporary structure on the stack (excluding the name pointer) and copy out to userspace from there. As we already have an inparam union with an appropriate member and that memory is already cleared even for read only calls make use of that as a temporary store. Based on an initial patch by Brian Belleville. CVE-2018-7755 Signed-off-by: Andy Whitcroft <apw@canonical.com> Broke up long line. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20mlxsw: spectrum: Bump required firmware versionPetr Machata
MC-aware mode was introduced to mlxsw in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") and fixed up later in commit 3a3539cd3632 ("mlxsw: spectrum_buffers: Set up a dedicated pool for BUM traffic"). As the final piece of puzzle, a firmware issue whereby a wrong priority was assigned to BUM traffic was corrected in FW version 13.1703.4. Therefore require this FW version in the driver. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20libata: mask swap internal and hardware tagJens Axboe
hen we're comparing the hardware completion mask passed in from the driver with the internal tag pending mask, we need to account for the fact that the internal tag is different from the hardware tag. If not, then we can end up either prematurely completing the internal tag (since it's not set in the hw mask), or simply flag an error: ata2: illegal qc_active transition (100000000->00000001) If the internal tag is set, then swap that with the hardware tag in this case before comparing with what the hardware reports. Fixes: 28361c403683 ("libata: add extra internal command") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151 Cc: stable@vger.kernel.org Reported-by: Paul Sbarra <sbarra.paul@gmail.com> Tested-by: Paul Sbarra <sbarra.paul@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20USB: STORAGE: ISD200 Fixed coding style issue "space required in for loop"Jagdish Tirumala
Fixed errors spaces required around the for loop '=' , ';' and '<' in drivers/usb/storage/isd200.c Signed-off-by: Jagdish Tirumala <t.jag587@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20serial: imx: restore handshaking irq for imx1Uwe Kleine-König
Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20b43: fix DMA error related regression with proprietary firmwareLarry Finger
In commit 66cffd6daab7 ("b43: fix transmit failure when VT is switched"), a condition is noted where the network controller needs to be reset. Note that this situation happens when running the open-source firmware (http://netweb.ing.unibs.it/~openfwwf/), plus a number of other special conditions. for a different card model, it is reported that this change breaks operation running the proprietary firmware (https://marc.info/?l=linux-wireless&m=153504546924558&w=2). Rather than reverting the previous patch, the code is tweaked to avoid the reset unless the open-source firmware is being used. Fixes: 66cffd6daab7 ("b43: fix transmit failure when VT is switched") Cc: Stable <stable@vger.kernel.org> # 4.18+ Cc: Taketo Kabe <kabe@sra-tohoku.co.jp> Reported-and-tested-by: D. Prabhu <d.praabhu@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20usb: typec: Group all TCPCI/TCPM code togetherHeikki Krogerus
Moving all the drivers that depend on the Port Controller Manager under a new directory drivers/usb/typec/tcpm/ and making Guenter Roeck the designated reviewer of that code. Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: typec: fusb302: reorganizing the probe function a littleHeikki Krogerus
The debugfs needs to be initialized as the last step in probe in this case. The struct dentry *rootdir can't be pointing to anything unless driver probe really finishes successfully. It is also not necessary to clear the i2c clientdata if the probe fails, so removing the extra label used for that. Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20platform: x86: intel_cht_int33fe: Remove the old connections for the muxesHeikki Krogerus
USB Type-C class driver now expects the muxes to be always assigned to the ports and not controllers, so the connections for the mux and fusb302 can be removed. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: typec: class: Don't use port parent for getting mux handlesHeikki Krogerus
It is not possible to use the parent of the port device when requesting mux handles as the parent may be a multiport USB Type-C or PD controller. The muxes must be assigned to the ports, not the controllers. This will also move the requesting of the muxes after the port device is initialized. Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20platform: x86: intel_cht_int33fe: Add connections for the USB Type-C portHeikki Krogerus
Assigning the mux to the USB Type-C port on top of fusb302. That will prepare this driver for the change in the USB Type-C class code, where the class driver will assume the muxes to be always assigned to the ports and not the controllers. Once the USB Type-C class driver has been updated, the connections between the mux and fusb302 can be dropped. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20platform: x86: intel_cht_int33fe: Add connection for the DP alt modeHeikki Krogerus
Adding a connection for the DisplayPort alternate mode. PI3USB30532 is used for muxing the port to DisplayPort on CHT platforms. The connection allows the alternate mode device to get handle to the mux, and therefore make it possible to use the USB Type-C connector as DisplayPort. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20platform: x86: intel_cht_int33fe: Register all connections at onceHeikki Krogerus
We can register all device connection descriptors with a single call to device_connections_add(). Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20platform: x86: intel_cht_int33fe: Add dependency on muxesHeikki Krogerus
The connections create clear dependency on the muxes. fusb302 fails to probe unless we have the mux drivers available. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: typec: mux: Take care of driver module reference countingHeikki Krogerus
Functions typec_mux_get() and typec_switch_get() already make sure that the mux device reference count is incremented, but the same must be done to the driver module as well to prevent the drivers from being unloaded in the middle of operation. This fixes a potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: 93dd2112c7b2 ("usb: typec: mux: Get the mux identifier from function parameter") Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: core: safely deal with the dynamic quirk listsHarry Pan
Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[<ffffffffb0953ec7>] [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan <harry.pan@intel.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: roles: Take care of driver module reference countingHeikki Krogerus
This fixes potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") Cc: <stable@vger.kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: phy: mxs: fix spelling mistake "stardard" -> "standard"Colin Ian King
Trivial fix to spelling mistake in dev_dbg message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: host: fotg2: Fix potential NULL dereferenceLinus Walleij
There is code in the .remove() hook to handle the drvdata being NULL, for good reasons: it is never set, so it will always be NULL. As I moved code around, static checkers start complaining. Instead of this, make sure to always set it on successful probe so we can always dereference it on the remove path. Use the platform_device_[set|get]_drvdata() since this is a platform device. Fixes: ffa8a31b5b3b ("usb: host: fotg2: add silicon clock handling") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: renesas_usbhs: Add multiple clocks managementYoshihiro Shimoda
R-Car Gen3 needs to enable clocks of both host and peripheral. Since [eo]hci-platform disables the reset(s) when the drivers are removed, renesas_usbhs driver doesn't work correctly. To fix this issue, this patch adds multiple clocks management on this renesas_usbhs driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: renesas_usbhs: Add reset_controlYoshihiro Shimoda
R-Car Gen3 needs to deassert resets of both host and peripheral. Since [eo]hci-platform is possible to assert the reset(s) when the probing failed, renesas_usbhs driver doesn't work correctly regardless of finished probing. To fix this issue, this patch adds reset_control on this renesas_usbhs driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usbcore: Select UAC3 configuration for audio if presentSaranya Gopal
USB audio class 3.0 specification introduced many significant changes like - new power domains, support for LPM/L1 - new cluster descriptor - new high capability and class-specific string descriptors - BADD profiles - ... and many other things (check spec from link below: http://www.usb.org/developers/docs/devclass_docs/USB_Audio_v3.0.zip) Now that UAC3 is supported in linux, choose UAC3 configuration for audio if the device supports it. Selecting this configuration will enable the system to save power by leveraging the new power domains and LPM L1 capability and also support new codec types and data formats for consumer audio applications. Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: EHCI: ehci-mv: add DT supportLubomir Rintel
Add Device tree support. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: EHCI: ehci-mv: use phy-pxa-usbLubomir Rintel
Use a proper PHY driver, instead of hooks to a board support package. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: EHCI: ehci-mv: remove private_initLubomir Rintel
It's unused. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: EHCI: make ehci-mv a separate driverLubomir Rintel
This is done do that it could be enabled alongside other platform EHCI glue drivers on multiplatform kernels. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: usbtmc: Remove sysfs group TermChar and auto_abortGuido Kiener
As all the properties of the usbtmc driver can now be controlled on a per file descriptor basis by ioctl functions the sysfs interface is of limited use. We are not aware about applications that are using the sysfs parameter TermChar, TermCharEnabled or auto_abort. Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Reviewed-by: Steve Bayless <steve_bayless@keysight.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-10-01 19:33:52 +0000