summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-09-18net: mvpp2: fix a txq_done race conditionAntoine Tenart
When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa09e2 ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18ravb: do not write 1 to reserved bitsKazuya Mizuguchi
EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: bnxt: Fix a uninitialized variable warning.zhong jiang
Fix the following compile warning: drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:49:5: warning: ‘nvm_param.dir_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18Merge tag 'mlx5-fixes-2018-09-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-09-17 Sorry about the previous submission of this series which was mistakenly marked for net-next, here I am resending with 'net' mark. This series provides three fixes to mlx5 core and mlx5e netdevice driver. Please pull and let me know if there's any problem. For -stable v4.16: ('net/mlx5: Check for SQ and not RQ state when modifying hairpin SQ') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: emac: fix fixed-link setup for the RTL8363SB switchChristian Lamparter
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Fixup the tail addr setting in xmit pathJose Abreu
Currently we are always setting the tail address of descriptor list to the end of the pre-allocated list. According to databook this is not correct. Tail address should point to the last available descriptor + 1, which means we have to update the tail address everytime we call the xmit function. This should make no impact in older versions of MAC but in newer versions there are some DMA features which allows the IP to fetch descriptors in advance and in a non sequential order so its critical that we set the tail address correctly. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Rework coalesce timer and fix multi-queue racesJose Abreu
This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18gpiolib: Free the last requested descriptorRicardo Ribalda Delgado
The current code only frees N-1 gpios if an error occurs during gpiod_set_transitory, gpiod_direction_output or gpiod_direction_input. Leading to gpios that cannot be used by userspace nor other drivers. Cc: Timur Tabi <timur@codeaurora.org> Cc: stable@vger.kernel.org Fixes: ab3dbcf78f60f46d ("gpioib: do not free unrequested descriptors) Reported-by: Jan Lorenzen <jl@newtec.dk> Reported-by: Jim Paris <jim@jtan.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18pinctrl: cannonlake: Fix gpio base for GPP-ESimon Detheridge
The gpio base for GPP-E was set incorrectly to 258 instead of 256, preventing the touchpad working on my Tong Fang GK5CN5Z laptop. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=200787 Signed-off-by: Simon Detheridge <s@sd.ai> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18Input: uinput - allow for max == min during input_absinfo validationPeter Hutterer
These values are inclusive, so a range of 1 requires min == max. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: elantech - enable middle button of touchpad on ThinkPad P72Aaron Ma
Adding 2 new touchpad IDs to support middle button support. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: atakbd - fix Atari CapsLock behaviourMichael Schmitz
The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: atakbd - fix Atari keymapAndreas Schwab
Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>, keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: egalax_ts - add system wakeup supportAnson Huang
This patch adds wakeup function support for egalax touch screen, if "wakeup-source" is added to device tree's egalax touch screen node, the wakeup function will be enabled, and egalax touch screen will be able to wakeup system from suspend. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Merge tag 'gvt-fixes-2018-09-18' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2018-09-18 - Fix initial DPIO PHY register state for BXT (Colin) - BXT untracked GEN9_CLKGATE_DIS_4 warning fix (Colin) - Fix srcu lock for GFN valid check (Weinan) - Should clear GGTT entry value after vGPU destroy (Zhipeng) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180918073349.GQ20737@zhen-hp.sh.intel.com
2018-09-18intel_th: pci: Add Ice Lake PCH supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Ice Lake PCH. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18intel_th: Fix resource handling for ACPI glue layerAlexander Shishkin
The core of the driver expects the resource array from the glue layer to be indexed by even numbers, as is the case for 64-bit PCI resources. This doesn't hold true for others, ACPI in this instance, which leads to an out-of-bounds access and an ioremap() on whatever address that access fetches. This patch fixes the problem by reading resource array differently based on whether the 64-bit flag is set, which would indicate PCI glue layer. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: ebc57e399b8e ("intel_th: Add ACPI glue layer") CC: stable@vger.kernel.org # v4.17+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18intel_th: Fix device removal logicAlexander Shishkin
Commit a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") brings in new subdevice addition/removal logic that's broken for "host mode": the SWITCH device has no children to begin with, which is not handled in the code. This results in a null dereference bug later down the path. This patch fixes the subdevice removal code to handle host mode correctly. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") CC: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18tty: vt_ioctl: fix potential Spectre v1Gustavo A. R. Silva
vsa.console is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue 'vc_cons' [r] Fix this by sanitizing vsa.console before using it to index vc_cons Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18tty: Drop tty->count on tty_reopen() failureDmitry Safonov
In case of tty_ldisc_reinit() failure, tty->count should be decremented back, otherwise we will never release_tty(). Tetsuo reported that it fixes noisy warnings on tty release like: pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0)) Fixes: commit 892d1fa7eaae ("tty: Destroy ldisc instance on hangup") Cc: stable@vger.kernel.org # v4.6+ Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Reviewed-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Jiri Slaby <jslaby@suse.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: cpm_uart: return immediately from console pollChristophe Leroy
kgdb expects poll function to return immediately and returning NO_POLL_CHAR when no character is available. Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll") Cc: Jason Wessel <jason.wessel@windriver.com> Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18tty: serial: lpuart: avoid leaking struct tty_structStefan Agner
The function tty_port_tty_get() gets a reference to the tty. Since the code is not using tty_port_tty_set(), the reference is kept even after closing the tty. Avoid using tty_port_tty_get() by directly access the tty instance. Since lpuart_start_rx_dma() is called from the .startup() and .set_termios() callback, it is safe to assume the tty instance is valid. Cc: stable@vger.kernel.org # v4.9+ Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: mvebu-uart: Fix reporting of effective CSIZE to userspaceJan Kiszka
Apparently, this driver (or the hardware) does not support character length settings. It's apparently running in 8-bit mode, but it makes userspace believe it's in 5-bit mode. That makes tcsetattr with CS8 incorrectly fail, breaking e.g. getty from busybox, thus the login shell on ttyMVx. Fix by hard-wiring CS8 into c_cflag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18Merge tag 'soundwire-4.19-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus Vinod writes: soundwire fixes for 4.19 - fixes in bus for - bus lock on master release - incorrect exit after stream configuration - duplicate stream state assignment
2018-09-18usb: gadget: uvc: configfs: Add section header commentsLaurent Pinchart
The UVC configfs implementation is large and difficult to navigate. Add a bit more air to the code to make it easier to read. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2018-09-18usb: gadget: uvc: configfs: Don't wrap groups unnecessarilyLaurent Pinchart
Various configfs groups (represented by config_group) are wrapped in structures that they're the only member of. This allows adding other data fields to groups, but it unnecessarily makes the code more complex. Remove the outer structures and use config_group directly to simplify the code. Groups can still be wrapped individually in the future if other data fields need to be added. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2018-09-18mtd: devices: m25p80: Make sure the buffer passed in op is DMA-ableBoris Brezillon
As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be DMA-able, and commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") failed to follow this rule as buffers passed to ->{read,write}_reg() are usually placed on the stack. Fix that by allocating a scratch buffer and copying the data around. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-09-18Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman
Dave writes: "Various fixes, all over the place: 1) OOB data generation fix in bluetooth, from Matias Karhumaa. 2) BPF BTF boundary calculation fix, from Martin KaFai Lau. 3) Don't bug on excessive frags, to be compatible in situations mixing older and newer kernels on each end. From Juergen Gross. 4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger. 5) Zero keying information in TLS layer before freeing copies of them, from Sabrina Dubroca. 6) Fix NULL deref in act_sample, from Davide Caratti. 7) Orphan SKB before GRO in veth to prevent crashes with XDP, from Toshiaki Makita. 8) Fix use after free in ip6_xmit, from Eric Dumazet. 9) Fix VF mac address regression in bnxt_en, from Micahel Chan. 10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann. 11) Programming adjustments to r8169 which fix not being to enter deep sleep states on some machines, from Kai-Heng Feng and Hans de Goede. 12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter Oskolkov." * gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits) net/ipv6: do not copy dst flags on rt init qmi_wwan: set DTR for modems in forced USB2 mode clk: x86: Stop marking clocks as CLK_IS_CRITICAL r8169: Get and enable optional ether_clk clock clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail r8169: enable ASPM on RTL8106E r8169: Align ASPM/CLKREQ setting function with vendor driver Revert "kcm: remove any offset before parsing messages" kcm: remove any offset before parsing messages net: ethernet: Fix a unused function warning. net: dsa: mv88e6xxx: Fix ATU Miss Violation tls: fix currently broken MSG_PEEK behavior hv_netvsc: pair VF based on serial number PCI: hv: support reporting serial number as slot information bnxt_en: Fix VF mac address regression. ipv6: fix possible use-after-free in ip6_xmit() net: hp100: fix always-true check for link up state ARM: dts: at91: add new compatibility string for macb on sama5d3 net: macb: disable scatter-gather for macb on sama5d3 net: mvpp2: let phylink manage the carrier state ...
2018-09-17dm raid: remove bogus const from decipher_sync_action() return typeGeert Uytterhoeven
With gcc-4.1.2: drivers/md/dm-raid.c:3357: warning: type qualifiers ignored on function return type Remove the "const" keyword to fix this. Fixes: 36a240a706d43383 ("dm raid: fix RAID leg rebuild errors") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-17dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointerMike Snitzer
Commit e8f74a0f0011 ("dm mpath: eliminate need to use scsi_device_from_queue") introduced 2 regressions: 1) memory leak occurs if attached_handler_name is not assigned to m->hw_handler_name 2) m->hw_handler_name can become a dangling pointer if the RETAIN_ATTACHED_HW_HANDLER flag is set and scsi_dh_attach() returns -EBUSY. Fix both of these by clearing 'attached_handler_name' pointer passed to setup_scsi_dh() after it is assigned to m->hw_handler_name. And if setup_scsi_dh() doesn't consume 'attached_handler_name' parse_path() will kfree() it. Fixes: e8f74a0f0011 ("dm mpath: eliminate need to use scsi_device_from_queue") Cc: stable@vger.kernel.org # 4.16+ Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-18drm/i915/gvt: clear ggtt entries when destroy vgpuZhipeng Gong
When one vgpu is destroyed, its ggtt entries are not cleared. This patch clears ggtt entries to avoid information leak. v2: add 'Fixes' tag (Zhenyu) Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com> Reviewed-by: Hang Yuan <hang.yuan@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-18drm/i915/gvt: request srcu_read_lock before checking if one gfn is validWeinan Li
Fix the suspicious RCU usage issue in intel_vgpu_emulate_mmio_write. Here need to request the srcu read lock of kvm->srcu before doing gfn_to_memslot(). The detailed log is as below: [ 218.710688] ============================= [ 218.710690] WARNING: suspicious RCU usage [ 218.710693] 4.14.15-dd+ #314 Tainted: G U [ 218.710695] ----------------------------- [ 218.710697] ./include/linux/kvm_host.h:575 suspicious rcu_dereference_check() usage! [ 218.710699] other info that might help us debug this: [ 218.710702] rcu_scheduler_active = 2, debug_locks = 1 [ 218.710704] 1 lock held by qemu-system-x86/2144: [ 218.710706] #0: (&gvt->lock){+.+.}, at: [<ffffffff816a1eea>] intel_vgpu_emulate_mmio_write+0x5a/0x2d0 [ 218.710721] stack backtrace: [ 218.710724] CPU: 0 PID: 2144 Comm: qemu-system-x86 Tainted: G U 4.14.15-dd+ #314 [ 218.710727] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 [ 218.710729] Call Trace: [ 218.710734] dump_stack+0x7c/0xb3 [ 218.710739] gfn_to_memslot+0x15f/0x170 [ 218.710743] kvm_is_visible_gfn+0xa/0x30 [ 218.710746] intel_vgpu_emulate_gtt_mmio_write+0x267/0x3c0 [ 218.710751] ? __mutex_unlock_slowpath+0x3b/0x260 [ 218.710754] intel_vgpu_emulate_mmio_write+0x182/0x2d0 [ 218.710759] intel_vgpu_rw+0xba/0x170 [kvmgt] [ 218.710763] intel_vgpu_write+0x14d/0x1a0 [kvmgt] [ 218.710767] __vfs_write+0x23/0x130 [ 218.710770] vfs_write+0xb0/0x1b0 [ 218.710774] SyS_pwrite64+0x73/0x90 [ 218.710777] entry_SYSCALL_64_fastpath+0x25/0x9c [ 218.710780] RIP: 0033:0x7f33e8a91da3 [ 218.710783] RSP: 002b:00007f33dddc8700 EFLAGS: 00000293 v2: add 'Fixes' tag, refine log format.(Zhenyu) Fixes: cc753fbe1ac4 ("drm/i915/gvt: validate gfn before set shadow page") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-18drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handlerColin Xu
Host prints lots of untracked MMIO at 0x4653c when creating linux guest. "gvt: vgpu 2: untracked MMIO 0004653c len 4" GEN9_CLKGATE_DIS_4 (0x4653c) is accessed by i915 for gmbus clockgating. However vgpu doesn't support any clockgating powergating operations on related mmio access trap so need add it to default handler. GEN9_CLKGATE_DIS_4 is accessed in bxt_gmbus_clock_gating() which only applies to GEN9_LP so doens't show the warning on other platforms. The solution is to add it to default handler init_bxt_mmio_info(). Reviewed-by: He, Min <min.he@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-18drm/i915/gvt: Init PHY related registers for BXTColin Xu
Recent patch fixed the call trace "ERROR Port B enabled but PHY powered down? (PHY_CTL 00000000)". but introduced another similar call trace shown as: "ERROR Port C enabled but PHY powered down? (PHY_CTL 00000200)". The call trace will appear when host and guest enabled different ports, i.e. host using PORT C or neither PORT is enabled, while guest is always using PORT B as simulated by gvt. The issue is actually covered previously before the commit and reverals now when the commit do the right thing. On BXT, some PHY registers are initialized by vbios, before i915 loaded. Later i915 will re-program some, or skip some based on the implementation. The initialized mmio for guest i915 is done by gvt, based on the snapshot taken from host. If host and guest have different PORT enabled, some DPIO PHY mmios that gvt initialized for guest i915 will not match the simualted monitor for guest, which leads to guest i915 print the calltrace when it's trying to enable PHY and PORT. The solution is to init these DPIO PHY registers to default value, then guest i915 will program them to reasonable value based on the default powerwell table and enabled PORT. Together with the old patch, all similar call trace in guest kernel on BXT can be resolved. v2: Move PHY register init to intel_vgpu_reset_mmio (Min) v3: Do not delete empty line in issue fix patch. (zhenyu) Fixes: c8ab5ac30ccc ("drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY") Reviewed-by: He, Min <min.he@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-17qmi_wwan: set DTR for modems in forced USB2 modeBjørn Mork
Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17clk: x86: Stop marking clocks as CLK_IS_CRITICALHans de Goede
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver has been modified to get and enable this clock (if present) the marking of the clocks as CLK_IS_CRITICAL is no longer necessary. This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail devices not being able to reach S0i3 greatly decreasing their battery drain when suspended. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: Get and enable optional ether_clk clockHans de Goede
On some boards a platform clock is used as clock for the r8169 chip, this commit adds support for getting and enabling this clock (assuming it has an "ether_clk" alias set on it). This is related to commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") which is a previous attempt to fix this for some x86 boards, but this causes all Cherry Trail SoC using boards to not reach there lowest power states when suspending. This commit (together with an atom-pmc-clk driver commit adding the alias) fixes things properly by making the r8169 get the clock and enable it when it needs it. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17clk: x86: add "ether_clk" alias for Bay Trail / Cherry TrailHans de Goede
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i2 or S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk" alias, so that the relevant ethernet drivers can try to (optionally) use this, without needing X86 specific code / hacks, thus fixing ethernet on these devices without breaking S0i3 support. This commit uses clkdev_hw_create() to create the alias, mirroring the code for the already existing "mclk" alias for pmc_plt_clk_3. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: enable ASPM on RTL8106EKai-Heng Feng
The Intel SoC was prevented from entering lower idle state because of RTL8106E's ASPM was not enabled. So enable ASPM on RTL8106E (chip version 39). Now the Intel SoC can enter lower idle state, power consumption and temperature are much lower. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: Align ASPM/CLKREQ setting function with vendor driverKai-Heng Feng
There's a small delay after setting ASPM in vendor drivers, r8101 and r8168. In addition, those drivers enable ASPM before ClkReq, also change that to align with vendor driver. I haven't seen anything bad becasue of this, but I think it's better to keep in sync with vendor driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creationLyude Paul
As pointed out by Daniel Vetter, we should be usinng drm_drv_uses_atomic_modeset() for determining whether or not we want to make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as the former isn't an accurate representation of whether or not the driver is actually using atomic modesetting internally (even though it might not be exposing atomic capabilities). Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
2018-09-17net/mlx5e: TLS, Read capabilities only when it is safeSaeed Mahameed
Read TLS caps from the core driver only when TLS is supported, i.e mlx5_accel_is_tls_device returns true. Fixes: 790af90c00d2 ("net/mlx5e: TLS, build TLS netdev from capabilities") Change-Id: I5f21ff4d684901af487e366a7e0cf032b54ee9cf Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-09-17net/mlx5: Check for SQ and not RQ state when modifying hairpin SQAlaa Hleihel
When modifying hairpin SQ, instead of checking if the next state equals to MLX5_SQC_STATE_RDY, we compare it against the MLX5_RQC_STATE_RDY enum value. The code worked since both of MLX5_RQC_STATE_RDY and MLX5_SQC_STATE_RDY have the same value today. This patch fixes this issue. Fixes: 18e568c390c6 ("net/mlx5: Hairpin pair core object setup") Change-Id: I6758aa7b4bd137966ae28206b70648c5bc223b46 Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-17net/mlx5: Fix read from coherent memoryEli Cohen
Use accessor function READ_ONCE to read from coherent memory modified by the device and read by the driver. This becomes most important in preemptive kernels where cond_resched implementation does not have the side effect which guaranteed the updated value. Fixes: 269d26f47f6f ("net/mlx5: Reduce command polling interval") Change-Id: Ie6deeb565ffaf76777b07448c7fbcce3510bbb8a Signed-off-by: Eli Cohen <eli@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-17Merge tag 'spi-fix-v4.19-rc4' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark writes: "spi: Fixes for v4.19 As well as one driver fix there's a couple of fixes here which address issues with the use of IDRs for allocation of dynamic bus numbers, ensuring that dynamic bus numbers interact well with static bus numbers assigned via DT and otherwise." * tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE spi: Fix double IDR allocation with DT aliases spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
2018-09-17media: platform: fix cros-ec-cec build errorRandy Dunlap
Fix build when MFD_CROS_EC is not enabled but COMPILE_TEST=y. Fixes this build error: ERROR: "cros_ec_cmd_xfer_status" [drivers/media/platform/cros-ec-cec/cros-ec-cec.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17mmc: sdhi: sys_dmac: check for all Gen3 types when whitelistingWolfram Sang
Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-17dm thin metadata: fix __udivdi3 undefined on 32-bitMike Snitzer
sector_div() is only viable for use with sector_t. dm_block_t is typedef'd to uint64_t -- so use div_u64() instead. Fixes: 3ab918281 ("dm thin metadata: try to avoid ever aborting transactions") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-17net: ethernet: Fix a unused function warning.zhong jiang
Fix the following compile warning: drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function] static int lan743x_pm_suspend(struct device *dev) drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function] static int lan743x_pm_resume(struct device *dev) Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: mv88e6xxx: Fix ATU Miss ViolationAndrew Lunn
Fix a cut/paste error and a typo which results in ATU miss violations not being reported. Fixes: 0977644c5005 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 00:44:02 +0000